Wheel rims, tires, and hubs are major components making up part of the axle end or, what the trucking industry calls the wheel end.
Wheel rims, tires, and hubs are major components of the wheel end, which is part of a vehicle's axle that supports the wheel and connects it to the vehicle's suspension system. The wheel end is responsible for bearing the weight of the vehicle, transmitting power to the wheels, and allowing the wheels to rotate smoothly.
Proper maintenance and repair of the wheel end components is crucial for ensuring the safe and efficient operation of a vehicle. Regular inspection and replacement of worn or damaged wheel end components can help prevent road accidents and breakdowns on the road.
Learn more about Vehicle's suspension system: https://brainly.com/question/9337799
#SPJ11
Which of the following is not an additional tax a taxpayer may have to pay? Multiple Choice Alternative minimum tax. Self-employment tax Net investment income tax Excess wage tax.
Excess wage tax. Excess wage tax is not an additional tax that a taxpayer may have to pay. The alternative minimum tax (AMT) is a separate tax system that imposes a minimum level of tax liability on certain taxpayers.
Self-employment tax is a tax that individuals who work for themselves must pay to fund Social Security and Medicare. Net investment income tax is a tax imposed on certain types of investment income for high-income individuals. However, there is no specific tax called "excess wage tax." It is important for taxpayers to be aware of these potential additional taxes and understand their applicability based on their income sources and circumstances.
Learn more about Excess wage tax here;
https://brainly.com/question/32683894
#SPJ11
If the rate of increase of total utility declines as the quantity consumed of a good increases, it follows that marginal utility must be
Answer:
negative
Explanation:
Marginal utility refers to the additional satisfaction that a consumer obtains from getting one more unit of a good. Marginal utility is negative if the overall utility decreases with the consumption of one more unit.
As the rate of increase of total utility declines, the quantity consumed of a good increase. It follows that marginal utility must be negative.
which of the following is not a strategic choice that a company must make to complement and supplement its choice of one of the five generic competitive strategies? a. whether to focus on building competitive advantages b. whether to employ the element of surprise as opposed to doing what rivals expect and are prepared for c. whether to employ a market share leadership strategy d. whether to display a strong bias for swift, decisive, and overwhelming actions to overpower e. whether to create and deploy company resources to cause rivals to defend themselves
A company must make to complement and supplement whether to employ a market share leadership strategy.The correct answer is c.
The five generic competitive strategies are cost leadership, differentiation, focused low-cost, focused differentiation, and integrated low-cost/differentiation. When a company chooses one of these strategies, it must also make strategic choices to complement and supplement its primary choice. These strategic choices include building competitive advantages, employing the element of surprise, displaying a strong bias for swift, decisive, and overwhelming actions, and creating and deploying company resources to cause rivals to defend themselves.
However, employing a market share leadership strategy is not one of the strategic choices that a company must make to complement and supplement its primary choice of a generic competitive strategy. A market share leadership strategy is a specific goal that a company may pursue as part of its competitive strategy, but it is not a choice that supplements or complements a company's primary choice of a generic competitive strategy.
Click the below link, to learn more about Competitive strategies:
https://brainly.com/question/30364295
#SPJ11
WHAT DISADVANTAGES ARE THERE TO BEING A SOLE TRADER IN CONTRAST TO A PARTNERSHIP?
Explanation:
freedom
you can make quick dissions alone unlike partnership.
easy to run
requires small capital to start
you enjoy all the profits alone
Suppose you have three choices as to what to do for two hours on Sunday afternoon: work around the house, earning $3.50 an hour; baby-sit for your neighbor earning $10 an hour; or go to the movies and pay $6 for a ticket. You choose to go to the movies. What is your opportunity cost?
Answer:
the opportunity cost is in the case when you choose to go to the movies is $20
Explanation:
The computation of the opportunity cost is in the case when you choose to go to the movies is shown below:
= Earning per hour × number of hours
= $10 × 2 hours
= $20
Hence, the opportunity cost is in the case when you choose to go to the movies is $20
Write a business plan that presents possible solutions to the
following problems:-
1. Obesity in India
2. Diabetes in India
3. Old age care in India
4. Rising costs of healthcare in India
5. Yoga cent
Business plan that presents possible solutions to the following problems Obesity in India, Diabetes in India, Old age care in India.
1.Problem: Obesity in India
a) Market Analysis:
India is experiencing a significant rise in obesity rates due to changing dietary patterns and sedentary lifestyles. According to recent statistics, over 135 million Indians are obese. By establishing a chain of healthy food outlets, we can tap into this growing market demand.
b) Solution:
Our healthy food outlets will offer a wide range of options, including low-calorie meals, salads, smoothies, and snacks made from fresh and locally sourced ingredients. By promoting portion control and balanced nutrition, we aim to create awareness about healthy eating habits and combat obesity.
c) Financial Projections:
To establish a successful chain of healthy food outlets, we estimate an initial investment of INR 5 million for the first year. Our projected revenue for the first year is INR 10 million, with a conservative growth rate of 15% per annum. By year three, we aim to have ten outlets and achieve a revenue of INR 30 million.
2.Problem: Diabetes in India
a) Market Analysis:
India has the second-highest number of individuals living with diabetes globally, estimated at over 77 million. By leveraging digital technology, we can bridge the gap between diabetes management and patients' access to healthcare services.
b) Solution:
Our digital platform will provide a comprehensive suite of tools and resources for diabetes management. Users will have access to remote monitoring devices, personalized diet plans, exercise routines, and a network of diabetes specialists for consultations. We will also collaborate with pharmaceutical companies to provide discounted diabetes medications.
c) Financial Projections:
To develop and launch the digital platform, we estimate an initial investment of INR 8 million. Our projected revenue for the first year is INR 15 million, with a growth rate of 20% per annum. By year three, we aim to have 50,000 active users and achieve a revenue of INR 50 million.
3.Problem: Old Age Care in India
a) Market Analysis:
India is witnessing a significant increase in its elderly population, with a rising demand for specialized care services. By providing well-equipped assisted living facilities, we can cater to the needs of this demographic.
b) Solution:
Our assisted living facilities will offer comfortable living spaces, round-the-clock medical support, personalized care plans, social activities, and nutritious meals. We will prioritize the safety, well-being, and dignity of the elderly residents while providing a supportive environment.
c) Financial Projections:
To establish a high-quality assisted living facility, we estimate an initial investment of INR 20 million. Our projected revenue for the first year.
To know more about obesity, visit;
https://brainly.com/question/29392706
#SPJ11
outline 2 advantages to H&H of using secondary market research
As a form four student studying commerce subject you are required to give knowledge to your community as to why it is important for them to pay tax. (Five (5) points) SECTION C: (30 Marks) Answer two (2) questions from this section. An insurance company has received an application from WBC CO. LTD requesting for insurance cover for their electronics équipment against the risk of fire. Explain five (5) factors the Insurance should consider in deciding whether to provide the insurance cover or not. Identify six (6) methods used by the government of Tanzania to protect the local industries for the growth of the economy of Tanzania. You are the one who studied marketing and someone wants to start a business. Advise him/her five (5) necessary conditions he/she should consider before initiating a busines
Paying taxes is important because it generates revenue for the government, which is then used to build and support socialized services and develop infrastructure for citizens.
When Choosing an Insurance Company, Consider These Five Factors
Reputation of the CompanyPriceLegal AccreditationFinancial StabilityCustomer ServiceStarting a Small Business
Refine your concept.Make a business plan.Examine your financial situationChoose your legal business structure.Register with the government and the Internal Revenue Service.Purchase a policy of insuranceCreate your team.Select your vendorsAdvertise and brand yourselfExpand your company.Learn more about Small Business here:
https://brainly.com/question/13424073
#SPJ9
how Is productivity determined?
a.by measuring The relationship to inputs and outputs
b. by comparing the profitability of competing markets
c. by measuring the relationship between supply and demand
d. by comparing the number of hours worked by all employees
Answer:
a. by measuring The relationship to inputs and outputs
Explanation:
Productivity shows the efficiency of generating output using the available inputs. It is measured by dividing the output of a company or a production line by the inputs used. Therefore, productivity shows the relationship between inputs and outputs.
Productivity can also be measured by labor output. In this case, the output is divided by the number of labor hours used.
Brandi Colvin, Desert Creek Honey's office manager, says she likes working for a small company "because here, we are like a family." Owner Blake Shook echoes that sentiment by saying, "So many of the people that work here have worked here from the very beginning." Brandi and Blake are discussing which advantage small businesses have over larger businesses?
Market niches
Too little money
Lower overhead costs
Personal customer service
The correct option is D). Brandi Colvin, Desert Creek Honey's office manager, says she likes working for a small company "because here, we are like a family." Owner Blake Shook echoes that sentiment by saying, "So many of the people that work here have worked here from the very beginning." Brandi and Blake are discussing the advantage of small businesses over larger businesses in the form of personal customer service. Hence, the correct option is D) Personal customer service.
Personal customer service refers to providing customers with the best possible assistance in solving their problems. It requires one-on-one interaction with a customer to help them solve their problems and fulfill their needs. Customer service can be described as a set of procedures or processes that assist customers in the completion of a transaction or the resolution of their problems.
Good customer service entails meeting the customer's needs and expectations in a timely and friendly manner. Personal customer service is one of the biggest advantages of small businesses over large businesses because small businesses can have more personal and direct communication with customers than large businesses.
Therefore, the correct option is D) Personal customer service.
For more question on company
https://brainly.com/question/24448358
#SPJ8
Explain why a positive attitude, high -esteem, and enthusiasm contribute to career success
Answer:
A positive attitude, high-esteem, and enthusiasm contribute to career success because they make the worker approach their activities, projects and ideas with a positive mindset, trusting in their abilities and anticipating a positive result, facing and overcoming their fears and always looking to the good side of things.
On the other hand, if the person were pessimistic or had a bad attitude, they would face their projects with doubts and fears, putting them aside in the face of the first adversities.
Creating a random sample. In this question you will create a function q2() that creates a random sample of three variables y, X1, 22 and then runs a regression of y on 21, returning the value of B1. 2.1. Function q2(n, gamma) should take the following two arguments: n - size of a random sample to generate gamma - magnitude of a linear relationship between X1 and 22. 2.2. Recommended steps inside q2() code are: • Create a dataframe data with a single variable epsilon as a vector of n random draws from N(0,1) distribution, i.e. a normal distribution with mean 0 and variance 1. 2 • Create variable data$x1 as a vector of n random draws from N(3,1) distribution. • Create variable data$u as a vector of n random draws from N(0,1) distribution. • Create variable data$x2 using the formula x2 = y*1 + u, where y is specified by argument gamma passed to q2(). • Create variable data$y using the formula y = 4+1.521 + 1.5 22 + €. • Run a simple linear regression of y on 21 and return the slope estimate B1 as the output of q2() function. 2.3. As a test for your q2() function, run the command q2(10000, gamma) with the second argument gamma varying from 1 to 0 (e.g. try 1, 0.7, 0.3, 0.1, 0.01). The closer it is to zero, the closer the number returned by q2() should be to the true value of B1, which is 1.5. Instructions 1. You should submit this assignment as a single R script file that produces all the necessary output as required by the questions below. Important: your entire code should run without any errors! Having an error that breaks code execution, even if it is a small typo, may result in zero points for your assignment. 2. Make sure to use the template R script file from Canvas as a starting point. Use comments inside your file to explain what you are doing with each part of each question (this will make reviewing your work more efficient). Make sure to comment out any code that is redundant, e.g. View() calls that you use to double check your work. 3. Important: questions 1 and 2 below must be completed using base R functions. Do not use any functions that come from external packages, i.e. packages that are not included in R's default installation. 4. All questions are extensions of similar issues discussed in class and can be solved in the same way with a few tweaks. 5. Make sure there is no redundant/unused code in your files. Your scripts should only include your comments and code that must be executed to obtain answers. If you create any temporary objects (variables, datasets, etc), make sure to remove them at the end of your code.
(1)
q2 <- function(n, gamma) {
Create a dataframe with epsilon, x1, and u variables
data <- data.frame(epsilon=rnorm(n), x1=rnorm(n, 3, 1), u=rnorm(n))
Create x2 variable using formula y*1 + u
data$x2 <- gamma * data$x1 + data$u
Create y variable using formula 4 + 1.521 + 1.5*x2 + epsilon
data$y <- 4 + 1.521 + 1.5*data$x2 + data$epsilon
Run a simple linear regression of y on x2 and return the slope estimate
coef(summary(lm(y ~ x2, data=data)))[2,1]
}
(2)
The q2() function generates a random sample of n observations of variables epsilon, x1, and u, and then creates x2 and y variables using specific formulas.
The function then runs a simple linear regression of y on x2 and returns the slope estimate. The function takes two arguments, n (size of the sample) and gamma (magnitude of the relationship between x1 and x2).
The function is tested by running it with different values of gamma to see how close the slope estimate is to the true value of 1.5.
For more questions like Variable click the link below:
https://brainly.com/question/17344045
#SPJ11
Which of the following items are included in The Code of Professional Ethics of the American Institute of Certified Public Accountants: weigh all sides of decisions.
a. weigh all sides of decisions.
b. attending annual meetings.
c. generate innovative approaches to accounting.
d. integrity and objectivity.
Integrity and objectivity are the items are included in The Code of Professional Ethics of the American Institute of Certified Public Accountants.
What is meant by professional code of ethics?This is the term that is used to refer to the code that is used to apply to all of the people that would work in a particular organization that are meant to guide the behavior of the people in the organization and also check the ways that people would act.
Hence we can say that Integrity and objectivity are the items are included in The Code of Professional Ethics of the American Institute of Certified Public Accountants..
Read more on Professional Ethics: https://brainly.com/question/3921492
#SPJ1
THIS QUESTION HAS BEEN PREVIOUSLY ASKED ON CHEGG AND ANSWERED
INCORRECTLY. DO NOT COPY IT AND WORK FROM SCRATCH
Question 2
We live in an age of semi-autonomous cars: The driver is in control
most of t
The average total time taken for both communication and computation to be performed in the cloud is approximately 253 milliseconds.
In this scenario, the datacenter upload speed is 1 Mbps, which means that it takes 42 milliseconds to upload 5 seconds worth of brain data (5 seconds * 500 Hz * 32 bits / 1 Mbps).
The computation speed of the datacenter is 750 kbps, so it takes 6.67 milliseconds to process 5 seconds worth of brain data (5 seconds * 500 Hz * 32 bits / 750 kbps).
This value is obtained by considering the time taken for communication and the time required for computation, including the potential re-computation due to failure.
Now, taking into account the failure rate of the cloud server, which is 0.1, there is a 10% chance that a failure message will be sent back to the driver assist system. The time taken to communicate this failure is 210 milliseconds.
Therefore, the average time for communication and computation in the cloud is calculated as follows:
(0.9 * (42 + 6.67)) + (0.1 * (42 + 6.67 + 210)) ≈ 252.67 milliseconds
Rounding up to the nearest integer, the average total time taken for both communication and computation in the cloud is approximately 253 milliseconds.
Complete Question:
We live in an age of semi-autonomous cars: The driver is in control most of the time, but during critical scenarios when the system understands that the driver is incapable of taking action, the car takes over the decision-making.
Consider a brain mobile interface application that assists drivers on a freeway by monitoring their drowsiness. The driver wears a Neurosky headset that senses brain signals (EEG) at 500 Hz. Each brain data point is a 32-bit floating point number. The brain signal is collected by a smartphone and sent to a server, where complex machine-learning algorithms are used to determine the drowsiness level of the driver.
Additionally, the car is equipped with a 360° camera and sensors on the steering wheel, which are all interfaced with the driver's smartphone. The data rate of the wheel sensors is 2 kbps, and the data rate of the camera is 200 kbps.
Using data from all of these sources, the driver-assist system attempts to predict impending accidents. If the system detects that the driver is drowsy and predicts an impending accident, the system should react with some actuation, either automatic braking or steering. After collecting 5 seconds worth of data, the driver assist system has only 3 seconds to decide.
There are two options for performing all of the related computation: (a) use a data center, or (b) use a fog server (such as a laptop with internet connectivity that is traveling with the driver). The data center upload speed is 1 Mbps, whereas the fog server upload speed is 3 Mbps. The datacenter computation speed is 750 kbps (i.e., the data center can finish the computation on 750 kb of data in 1 second), while the fog server computational speed is 400 kbps.
Suppose the failure rate of the cloud server is 0.1. This means that 10% of the time the cloud will send a failure message back to the driver assist system. When this occurs, the system must transfer all of the information to the cloud again and redo the computation. The time taken to communicate that a failure has occurred is 210 milliseconds. What is the average total time taken for both communication and computation to be performed in the cloud, in milliseconds? (Write your answer as one number, rounded up to the nearest integer.)
Learn more about communication:
brainly.com/question/11951102
#SPJ11
Why were the British able to crush the revolt
Answer: they saw through their plans
Analyze why the scenario below fails to meet the criteria for a SWOT analysis:
The farming co-op determines that it needs to borrow $100,000 for new equipment to plant cherry orchards. The FFA (Future Farmers of America) is eager to help with the planting. However, the price of farmland has increased astronomically in the past five years as suburbanites have moved farther into the country.
Answer:
i am looking for it.
Explanation:
For purposes of computing the weighted average number of shares outstanding during the year, a transaction that must be treated as if it occurred at the beginning of the year is:
Answer:
The answer is option d. 367,500.
Determine the weighted-average number of shares outstanding as of December 31, 2018.
What are the limitations of using immunochromatography?
what are the limitations of using latex agglutination?
Immunochromatography and latex agglutination have limitations in sensitivity, specificity, and quantitative measurements. Careful consideration and exploration of alternatives are important.
1. Limitations of using immunochromatography:
a. Sensitivity: Immunochromatography tests may have limitations in terms of sensitivity, especially when compared to more advanced laboratory-based methods. This can result in false-negative results, where the test fails to detect the target analyte even if it is present at low levels.
b. Specificity: While immunochromatography tests are designed to be specific to the target analyte, there is a possibility of cross-reactivity or interference with other similar substances. This can lead to false-positive results or inaccurate interpretation of the test.
c. Quantitative measurement: Immunochromatography tests are generally qualitative or semi-quantitative, providing a visual indication of the presence or absence of a target analyte. However, they may not offer precise quantitative measurements, which can be a limitation in certain applications requiring precise quantification.
d. Limited multiplexing capability: Immunochromatography tests are often designed for the detection of a single target analyte or a limited number of analytes. Compared to laboratory-based techniques, they may have limited capacity for multiplexing, i.e., simultaneous detection of multiple analytes in a single test.
2. Limitations of using latex agglutination:
a. Sensitivity: Similar to immunochromatography, latex agglutination tests may have limitations in sensitivity. They may not be as sensitive as more advanced techniques, leading to potential false-negative results.
b. Specificity: Latex agglutination tests can be subject to cross-reactivity or interference, resulting in false-positive or false-negative results due to nonspecific interactions between the latex particles and other substances.
c. Subjectivity: Interpretation of latex agglutination tests can be subjective and dependent on the observer. The presence or absence of agglutination can be open to interpretation, which may introduce variability and potential for errors.
d. Limited quantitative information: Similar to immunochromatography, latex agglutination tests generally provide qualitative or semi-quantitative results rather than precise quantitative measurements. This can be a limitation in situations where precise quantification is required.
It's important to note that the limitations mentioned above are not inherent to immunochromatography or latex agglutination as a whole but represent common challenges associated with these techniques. Advancements and modifications in the design and methodology can help overcome some of these limitations in specific applications.
To learn more about Immunochromatography , Visit:
https://brainly.com/question/29554270
#SPJ11
HELPPPP!!!! WILLL GIVE BRAINLEST!!!
It allows you to rent a car while yours is being repaired. a. auto replacement c. personal damage liability b. comprehensive physical damage d. rental reimbursement
Answer:
I'm pretty sure the answer is d
Explanation:
Alternatively, you may pay out-of-pocket for your rental then seek reimbursement from the other insurance company once it completes its investigation.
Answer:
D
Explanation:
Mike's Café in June has revenue receipts of $75,000.00. His cost of goods
sold was $ 22,753. What is his food cost percentage for the month
Answer: 30.3%
This is a simple division problem
First let's take our given value of $75,000
and our other value of $22,753
Now we must divide the $22,753 by $75000
22,753/75,000
=0.30337
Convert the decimal into a percentage
30.3%
tori is a freelance photographer and her net earnings were $80,000. calculate tori’s payroll taxes if she was a full time employee
Tori’s payroll taxes if she was a full time employee of the company will be $11304.
How to compute the tax?From the given information, the net income is $80000, tax rate is 15.3% for social security and Medicare.
Therefore, the tax paid by Tori will be:
= 15.3% × $73880
= $11304
In conclusion, the tax will be $11304
Learn more about tax on:
https://brainly.com/question/25783927
Devon was surprised that his pay check was less than he had expected. His
paycheck was reduced because
had been withheld by his employer.
OA. incentives
B. commissions
C. gross pay
OD. deductions
The answer is C. Gross pay. Devon's paycheck was reduced because it had been withheld by his employer as gross payment.
"Gross pay" mean?Before any taxes, benefits, or other payroll deductions are done , an employee's gross salary is what they are paid. Net pay, often known as take-home pay, is the amount that is given after all withholdings have been taken into consideration.
Calculate my gross pay?Start by determining the total amount need for each pay period in order to see an employee's gross compensation. Hourly workers multiply their total hours worked by their hourly rate, plus any overtime. Employees on a salary split their yearly earnings by the number of pay periods.
To know more about Gross Payment visit:
https://brainly.com/question/30099743
#SPJ1
You are researching a company and find that it has an inventory period of 22.5 days, an accounts payable period of 37.1 days, and an accounts receivable period of 31.7 days. the company's operating cycle is days and its cash cycle is___days.
The company's operating cycle is 54.2 days, and its cash cycle is 17.1 days.
How do we calculate the operating cycle?To calculate the company's operating cycle and cash cycle, you should first understand the following terms:
1. Inventory Period: The time it takes for a company to sell its inventory (22.5 days)
2. Accounts Payable Period: The time it takes for a company to pay its suppliers (37.1 days)
3. Accounts Receivable Period: The time it takes for a company to collect payment from its customers (31.7 days)
Now, follow these steps to calculate the operating cycle and cash cycle:
Step 1: Calculate the Operating Cycle
Operating Cycle = Inventory Period + Accounts Receivable Period
Operating Cycle = 22.5 days + 31.7 days
Operating Cycle = 54.2 days
Step 2: Calculate the Cash Cycle
Cash Cycle = Operating Cycle - Accounts Payable Period
Cash Cycle = 54.2 days - 37.1 days
Cash Cycle = 17.1 days
To know more about operating cycle visit:
https://brainly.com/question/29731455
#SPJ11
A student in public administration wants to determine the mean amount members of city councils earn. The error in estimating the mean is to be less than $100 with a 99% level of confidence. The student found a report by the department of labor that estimated the standard deviation to be $1000. What is the required sample size?
Answer:
663.58
Explanation:
From the problem:
E, the maximum allowable error, is $100
The value of z for a 99 percent confidence level is 2.576
Estimate of standard deviation is $1,000.
n = [(z x s)/ E] ^ 2
n = [(2.576 x 1000) / 100}^2
= 25.76^2
=663.58
at what level are workers' compensation programs administered?
Workers' compensation programs are typically administered at the state level, with each state having its own specific laws and regulations regarding compensation for workplace injuries or illnesses. Some states may have a centralized agency responsible for administering workers' compensation, while others may rely on individual insurance companies to handle claims.
Workers' compensation is a type of insurance program that provides benefits to employees who are injured or become ill as a result of their job. These benefits can include payment for medical expenses, lost wages, and rehabilitation services. The goal of workers' compensation is to protect workers and their families from the financial hardships that can arise from workplace injuries and illnesses and to ensure that injured workers receive prompt and appropriate medical care.
In the United States, workers' compensation programs are administered at the state level. This means that each state has its own set of laws and regulations governing workers' compensation, and each state has a state agency or board responsible for overseeing the program.
Overall, workers' compensation programs are designed to provide important protections and benefits to workers who are injured or become ill as a result of their job. By administering these programs at the state level, each state can tailor their program to meet the specific needs and circumstances of its workforce.
Learn more about Workforce: https://brainly.com/question/29808744
#SPJ11
Which is a characteristic of judging approach
Answer:
Clarity and Closure
Explanation
Judgers take a planned, ordered, and precisely calibrated approach to life, developing both short- and long-term plans to assist them in achieving their objectives. For them, schedules and "to-do" lists are consoling. They dislike uncertainty and change, preferring to know what they are getting into instead.
Those that have this preference feel more in control of their surroundings. They are disciplined and resolute, seeking resolution as soon as possible to reduce stress. Judgers struggle with open-ended plans because they have a "work first-play later" mentality. Instead of addressing issues as they arise, they would prefer to devise three distinct backup plans.
Judgers take their obligations and deadlines very seriously, both in business and in life. They are quite particular.
Which employee is most likely to have a pension plan?
OA. A food bank volunteer
B. A part-time food server
OC. A family physician
D. A public school teacher
A public school teacher most likely to have a pension plan.
What does a pension plan mean?A pension plan is a type of employee benefits program created or maintained by an employer, an employee group (such a union), or both that offers retirement income or postpones income until the end of the covered employment period or beyond.
An employer must contribute to a fund that is set aside for a worker's future benefit in order to participate in a pension plan. When the worker retires, the earnings from the investments will provide income for the worker. The pool of cash is invested on the employee's behalf. In the U.S. private sector, traditional pension plans are getting harder to find.
To learn more about pension plan, visit:
https://brainly.com/question/28319433
#SPJ1
The Clayton Act makes it illegal for competitors to get together and set prices on the products or services they sell.
a. True
b. False
Budgetary slack occurs when a manager submits a budget that is ______.
Answer:
Budgetary slack occurs when a manager submits a budget that is too easy to attain.
Explanation:
Hope that helps!
Imagine that you’re a dental hygienist. While cleaning a client's teeth you ask what flavor toothpaste to use and they say "orange," but you accidentally use cinnamon. The next day the client writes a bad review online, saying you didn't listen to them. Bad reviews are bad for your business. You need to figure out a way to communicate an apology to the client. How will you reach out and what will you say?
Answer: try finding your client online
Explanation:
most often than not, a person with become angry when not getting their way, so try to explain the you client that you are human, and that we all make mistakes