Question Which of the hypothesis tests listed below is a left-tailed test? Select all correct answers. Select all that apply OH 18, H₁ 19.3 H₂8. H:/8. OH-11.3 Hp

Answer:

A) remove germs from the blood

Explanation:

cause the rest are the skeletal system function

Answer:

The skeletal system does not remove germs from the blood

Explanation:

I learned that from my teacher

Answer:

(1) atomic numbers

Explanation:

The observed regularities in the properties of the elements on the periodic table are periodic functions of their atomic numbers.

The observed regularities in the properties of  the elements are periodic functions of their atomic numbers.

Modern periodic law states that "Properties of elements are a periodic function of their atomic number not by their atomic mass". Modern periodic law was proposed by Henry Moseley in 1913. Physical and chemical properties of elements depend on the number of electrons and their arrangement.

Thus properties of elements are periodic function of their atomic numbers and not atomic masses. If the properties of an element depend on number of proton and neutron then the properties are periodic function of their atomic mass so we can conclude that the observed regularities in the properties of  the elements are periodic functions of their  atomic numbers.

Learn more: https://brainly.com/question/19534915

The total weight of dextrose is 250 grams.

The total weight of Aminosyn is 42.5 grams.

10 mL of KCI should be added.

5 mL of NaCl should be added.

The total volume of the solution with the original fluids and the addition of KCI and NaCl is 1315 mL.

To calculate the total weight of dextrose, we need to know the concentration of the 50% dextrose solution. Assuming the concentration refers to weight/volume (w/v), we can calculate the weight using the formula:

Weight of dextrose = (Concentration of dextrose * Volume of dextrose solution) / 100

Weight of dextrose = (50 * 500) / 100

Weight of dextrose = 250 g

Therefore, the total weight of dextrose is 250 grams.

To calculate the total weight of Aminosyn, we need to know the concentration of the 8.5% Aminosyn solution. Assuming the concentration refers to weight/volume (w/v), we can calculate the weight using the same formula as above:

Weight of Aminosyn = (Concentration of Aminosyn * Volume of Aminosyn solution) / 100

Weight of Aminosyn = (8.5 * 500) / 100

Weight of Aminosyn = 42.5 g

Therefore, the total weight of Aminosyn is 42.5 grams.

To calculate the volume of KCI to be added, we need to know the strength of the stock KCI solution. Assuming the stock KCI solution is 2 mEq/mL, we can calculate the volume of KCI using the formula:

Volume of KCI = (Amount of KCI needed) / (Strength of KCI solution)

Volume of KCI = 20 mEq / 2 mEq/mL

Volume of KCI = 10 mL

Therefore, 10 mL of KCI should be added.

To calculate the volume of NaCl to be added, we need to know the strength of the stock NaCl solution. Assuming the stock NaCl solution is 4.4 mEq/mL, we can calculate the volume of NaCl using the formula:

Volume of NaCl = (Amount of NaCl needed) / (Strength of NaCl solution)

Volume of NaCl = 22 mEq / 4.4 mEq/mL

Volume of NaCl = 5 mL

Therefore, 5 mL of NaCl should be added.

The total volume of the solution with the original fluids and the addition of KCI and NaCl can be calculated by adding the volumes of all the components:

Total volume = Volume of dextrose solution + Volume of Aminosyn solution + Volume of sterile water + Volume of KCI + Volume of NaCl

Total volume = 500 mL + 500 mL + 300 mL + 10 mL + 5 mL

Total volume = 1315 mL

Therefore, the total volume of the solution is 1315 mL.

Learn more about Volume from the link given below.

https://brainly.com/question/28058531

#SPJ4

It is used in the design of engines, where changes in pressure and temperature are used to convert thermal energy into mechanical work. It is also used in meteorology to predict weather patterns and in the study of the Earth's atmosphere.

Pressure and temperature are two fundamental physical quantities that are closely related in many physical processes. Understanding the relationship between these two quantities is essential in many scientific and engineering fields. This relationship can be described by the ideal gas law, which states that the pressure of an ideal gas is directly proportional to its temperature when the volume and number of particles are constant. In other words, when the temperature of a gas increases, its pressure increases, and vice versa. This can be explained by the kinetic theory of gases, which assumes that gases are made up of a large number of small particles that are in constant motion. The speed of these particles is proportional to the temperature of the gas. As the temperature of the gas increases, the particles move faster and collide more frequently with the walls of the container, resulting in an increase in pressure. Similarly, when the temperature of the gas decreases, the particles move slower and collide less frequently with the walls of the container, resulting in a decrease in pressure. This relationship between pressure and temperature is essential in many scientific and engineering applications.

for more questions on meteorology

https://brainly.com/question/16565664

#SPJ8

Answer:

idk but i tryed

Explanation:

The simplest way to use the periodic table to identify an element is by looking for the element’s name or elemental symbol. The periodic table can be used to identify an element by looking for the element’s atomic number. The atomic number of an element is the number of protons found within the atoms of that element.

Answer:

write the following as fractions in their simplest form

Given what we know about lab safety, we can confirm that the best way to smell a chemical sample when needed, is to place the sample under your nose at a safe distance and smell very slowly.

Many chemicals can at times emit relatively toxic fumes. These fumes can be very dangerous to inhale. Therefore, it is best to take safety precautions when attempting to smell a sample. Placing the sample at a distance and smelling slowly is a good habit as it gives you time to react to an unpleasant or potentially dangerous smell.

Therefore, we can confirm that since many chemicals in a lab can be dangerous and can often have relatively toxic fumes, extreme care should be taken if attempting to smell them. Placing the sample at a safe distance and smelling slowly is a good safety precaution to take.

To learn more about lab safety visit:

https://brainly.com/question/20103808?referrer=searchResults

1 gallon is approximately 3.78541 liters, so to convert to liter, we can multiply by this number:

So, 30.0 gal is approximately 114L.

Answer:

= 1.553 x 10²³ ions

Explanation:

One mole of a compound or a substance consists of 6.02 x 10²³ ions. 6.02 x 10²³ is also referred to as Avogadro's number/constant.

From the above question, we have been asked to determine the number of ions in 16g of H₂CO3.

The relative formula mass (RFM) of H₂CO3 is 62.026 u:

Derived as;

H₂CO3 = (2 x 1.008) + (12.01 x 1) + (3 x 16.00) u

= 62.026 u.

Number of moles = Mass/RFM

\(moles \: = \frac{16}{62.026} \\ = 0.2579563 \\ = 0.2580 \: moles\)

1 mole = 6.02 x 10²³ ions

0.2580 moles = ?

=

\( = \frac{0.2580 \times 6.02 \times 10 ^{23} }{1} \\ = 1.553 \times {10}^{23} \: ions\)

Hence the number of ions in 16g H2CO3 = 1.553 x 10²³

I uploaded the answer to a file hosting. Here's link:

tinyurl.com/wpazsebu

At least 14 to 18 percent of water is being lost each year. I really hope this helps :D

Answer:

The current loss figure is equivalent to ~25,920 liters per day or 9,467 m3 per year

It isn't a percentage, but I hope that helps a little

The correct option for the process used to refine aluminum from its bauxite ore is option D.

D. Smelting

The reason why smelting is the correct choice is as follows;

Bauxite is the aluminum ore from which alumina, also known as aluminum

oxide, Al₂O₃, is produced. Bauxite is extracted from the topsoil regions of

some subtropical and tropical regions, and the Bayer process is primarily

then used to produce alumina from the bauxite.

Aluminum is produced from the alumina by an aluminum smelting process

known as the Hall—Heroult electrolytic process which involves the use of a

carbon anode and direct current to produce aluminum by reducing the

aluminum oxide

Learn more about smelting process here:

https://brainly.com/question/3444206

Bond order and indicate stability is 3 and magnetic property is diamagnetic (no unpaired electron in MO diagram).

1. MO Configuration for \(C2^2\)-

\((14e^-): \sigma^2 1s \sigma^{*2}1s\sigma^2 2s \sigma^{*2}2s\pi^2 2p \pi^{2} 2p \pi^{2}\sigma^22p\)

2. Bond order = (8-2)/2 = 3  

3. Magnetic property = diamagnetic (no unpaired electron in MO diagram).

Bond order refers back to the number of chemical bonds among a pair of atoms.  It is a measure of the strength and stability of a chemical bond. Bond order is typically calculated by taking the difference between the number of bonding electrons and the number of antibonding electrons in a molecule, and dividing that number by two.

Bond order is an important concept in chemistry as it provides insight into the chemical properties of a molecule, such as its reactivity and stability. It can also help predict the bond length and bond energy of a molecule, which are important factors in understanding how molecules interact and react with one another.

To learn more about Bond order visit here:

brainly.com/question/12447843

#SPJ4

Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is used to create methyl esters and has a high degree of reactivity.

Diazomethane reacts swiftly and extremely effectively, producing just N2 as a byproduct, making it an appealing alkylating agent for carboxylic and phenols (Black, 1983). As it responds, its inherent yellow color releases, automatically indicating the status of the reaction. Methyl esters are created when carboxylic acids and diazomethane interact. Diazomethane is created in-situ and then interacted with the carboxyl group right away to create the methyl ester due to its high reactivity. Diazomethane has mostly been used to transform carboxylic acids into esters (diazoalkales) that may be examined using GC/MS or HPLC-MS. In etherate solutions, methyl esters can be produced at room temperature quickly, thoroughly, and quantitatively.

Learn more about acids

https://brainly.com/question/29426933

#SPJ4

The change in color indicates the endpoint of the reaction, which can be used to determine the concentration of calcium in water.

The indicator used in this experiment is Calmagite, and to ensure that the color change is clearly monitored, the pH of the calcium solution needs to be adjusted to pH 10 using a pH buffer solution. In this experiment, when Calmagite binds to the metal ions in the water sample, the solution before EDTA titration will exhibit a color of purple, and the solution after the EDTA titration will exhibit a color of blue.How to determine calcium in water?The calcium in water can be determined by titration, which is a technique that is used to determine the concentration of a substance in a solution. EDTA titration is used to determine the concentration of calcium in water. The process involves the addition of EDTA (ethylenediaminetetraacetic acid) to the sample, which forms a complex with calcium ions. EDTA is a chelating agent that can bind to metal ions such as calcium, and in the presence of a suitable indicator, the endpoint of the reaction can be detected.A suitable indicator for this reaction is Calmagite, which is a purple-colored compound that changes color to blue when it binds to calcium ions. The pH of the solution needs to be adjusted to pH 10 using a pH buffer solution to ensure that the color change is clearly monitored. The solution before EDTA titration will exhibit a color of purple, and the solution after the EDTA titration will exhibit a color of blue. The change in color indicates the endpoint of the reaction, which can be used to determine the concentration of calcium in water.

Learn more about Calmagite here,

https://brainly.com/question/30559544

#SPJ11

Air pollution worsens in winter as cold and dry air contains more pollutants. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.

As a result of the presence of compounds in the atmosphere that are hazardous to human health and the health of other living things, or that impair the climate or materials, air pollution is the contamination of the air.

It is known that cold air usually sinks and warm air usually rises. Most of the time, temperature decreases with elevation. This makes it easy for pollutant air near the surface of the earth to rise and be lifted away.

However, during winter, thermal inversions are more likely to happen. Because sunlight is weaker during this season, air near the earth’s surface may end up being cooler than the air above, causing the pollution-filled air near to earth's surface. Hence, Colder air traps more pollution.

It is also true that rain can wash away pollutants. But in the dry winter season, due to less humidity in the air, the chances of rainfall are generally lower. Hence, dry air contains more pollutants. Therefore, air pollution is worse in winter.

Learn more about air pollution here: https://brainly.com/question/15158482

#SPJ4

The missing number in the right triangle with sides 13 and 5 can be found using the Pythagorean theorem, which states that the sum of the squares of the legs (the two shorter sides) is equal to the square of the hypotenuse the longest side.

So, the main answer is that the missing number is the length of the hypotenuse. To find it, we can use the pythagorean This is the long answer and the exact value of the hypotenuse in simplified radical form. However, if we want a decimal approximation.

In a right triangle, the Pythagorean theorem applies, which states that the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.
In this case, you are given two sides: 13 and 5. One of them must be the hypotenuse.
Since 13 > 5, 13 is the hypotenuse.

To know more about hypotenuse  Visit;

https://brainly.com/question/29730442

#SPJ11

Answer:

The volume of the gas is approximately 4.41 liters

Explanation:

The details of the data of the Neon gas are;

The number of moles of Neon gas present, n = 11.6 moles

The temperature of the sample of Neon gas, T = 120 K

The pressure of the sample of the Neon gas, P = 25.6 atm

By the ideal gas equation, we have;

P·V = n·R·T

Where;

R = The universal gal constant = 0.08205 L·atm·mol⁻¹·K⁻¹

Therefore, we get;

V = n·R·T/P

Which gives;

V = 11.6 moles × 0.08205 L·atm·mol⁻¹·K⁻¹ × 120 K/(25.9 atm) ≈ 4.4097915 L

The volume of the gas, V ≈ 4.41 L.

When the umbilical cord is tied after birth, the umbilical arteries close by filling in with connective tissue. The umbilical arteries carry deoxygenated blood from the fetus to the placenta, where the blood is oxygenated and returned to the fetus via the umbilical vein.

When the umbilical cord is cut, the flow of blood from the placenta to the fetus ceases, and the umbilical arteries and vein begin to constrict. This constriction is caused by the contraction of smooth muscles in the vessel walls and the closure of small valves within the vessels. As the umbilical arteries constrict, the flow of blood to the placenta decreases and the vessels begin to fill in with connective tissue. Over time, the connective tissue replaces the smooth muscle and valve tissue in the vessel walls, resulting in the complete closure of the umbilical arteries. This process is important to prevent bleeding and infection in the newborn.

Learn more about placenta here:

https://brainly.com/question/26959441

#SPJ11

The number of molecules and number of moles of \(CH_{4}\) is 4 moles and 24.088×\(10^{23}\) molecules.

Calculation,

Atomic mass of carbon is 12 u and H is 1 u

So, molar mass of \(CH_{4}\) = 12 + 1×4 = 16 u = 16 g/mole

Number of moles = given mass / molar mass = 64 g/ 16 g/mol = 4 moles

1 moles of substance contains 6 .022 ×\(10^{23}\) molecules.

So, number of molecules in 3 moles of methane = 4×6.022 ×\(10^{23}\)  

number of molecules in 3 moles of methane  = 24.088×\(10^{23}\) molecules.

learn about moles

https://brainly.com/question/26416088

#SPJ4

Answer:

6 inches and that should be the answer

The correct option from the given statements concerning mixtures is (d) more than one correct response.

The statement (a) "The composition of a homogeneous mixture cannot vary" is incorrect as the composition of a homogeneous mixture can vary. For example, a mixture of salt and water is homogeneous and its composition can vary depending on the amount of salt and water mixed in it.

The statement (b) "A homogeneous mixture can have components present in two physical states" is correct. Homogeneous mixtures are mixtures that are uniform throughout their composition, meaning that there is no visible difference between the components of the mixture. For example, a mixture of ethanol and water is homogeneous and its components are present in two physical states (liquid and liquid).

The statement (c) "A heterogeneous mixture containing only one phase is an impossibility" is incorrect. A heterogeneous mixture is a mixture where the components are not evenly distributed and the mixture has different visible regions or phases. However, it is possible for a heterogeneous mixture to contain only one phase. For example, a mixture of oil and water is heterogeneous but can have only one phase.

To know more about homogeneous visit:

https://brainly.com/question/30587533

#SPJ11

The values of

Boiling point for the solution: 100.32°C

Freezing point for the solution: -1.15°C

Osmotic pressure for the solution at 20°C: 13.9 atm

we know that

Mass = \(volume \times density\)

Mass = \(1.039 \times 1000 = 1039\)gm solution

Then the amount of the solute and solvent are

Mass = \(0.10 \times 1039 = 103.9 g\) solute

Mass = \(0.9 \times 1039 = 935.1g\) solvent

now moles of glucose = \(\frac{103.9}{180} = 0.577 moles\)

now molarity M = \(\dfrac{moles}{volume} = \dfrac{0.577}{1} = 0.577\)

we know that

\(\Delta T = K_b \times m = 0.577 \times 0.617 = 0.32\)

hence the boiling point is

\(\Delta T = T_b - T\\T_b = 100 + 0.32 = 100.32\)

osmotic pressure = \(\pi = MRT\\\pi = 0.577 \times 0.082 \times 293 =13.9 atm\)

To learn more about osmotic pressure with the given link

https://brainly.com/question/12497098

#SPJ4

Answer: the answer is d

Explanation:

Decane + Dioxygen = Carbon Dioxide + Water

Reaction Type

Combustion

The final temperature is approximately 35°C. So, the correct answer is (1).

Let's assume the final temperature is T°C.

For the 3 liters of water at 40°C:

Heat gained = mass × specific heat capacity × temperature change

Heat gained = (3 kg) × (4.186 J/g°C) × (T - 40)

For the 1 liter of water at 20°C:

Heat lost = (1 kg) × (4.186 J/g°C) × (20 - T)

Since the total heat gained and lost are equal:

(3 kg) × (4.186 J/g°C) × (T - 40) = (1 kg) × (4.186 J/g°C) × (20 - T)

Simplifying the equation, we find:

\(3(T - 40) = 20 - T\\3T - 120 = 20 - T\\4T = 140\)

T = 35°C

The correct answer is (1).

To know more about specific heat capacity, here

brainly.com/question/1453843

#SPJ4

--The complete question is, mix 3 liters of water at 40 oc with 1 liter of water at 20 oc and the final temperature is group of answer choices

1.more than 30oc

2.less than 20 oc

3.less than 30oc

4.about 30oc--

Answer:

The main difference between flowering and nonflowering plants is their method of reproduction. Flowering plants rely on pollination for reproduction, where as nonflowering plants rely on dispersion to continue their life cycle.