If a 500.0 mL of a 15.0M solution acetic acid are added to 500.0 mL of
water, what is the new concentration? *

Answer:

because the water vapor still has the same molecular structure as liquid water (H2O). If the bubbles were caused by the decomposition of a molecule into a gas (such as H2O →H2 and O2), then boiling would be a chemical change.

Explanation:

Boiling water is an example of a physical change and not a chemical change because the water vapor still has the same molecular structure as liquid water (H2O). If the bubbles were caused by the decomposition of a molecule into a gas (such as H2O →H2 and O2), then boiling would be a chemical change.

Steel is produced from pig iron through a process known as steelmaking or iron and steel production.

The pig iron obtained from the blast furnace contains high amounts of carbon, impurities, and other elements. To convert pig iron into steel, the carbon content needs to be reduced to desired levels, and impurities must be removed.One common method of steelmaking is the basic oxygen process (BOP). In this process, pig iron is placed in a vessel called a converter, where oxygen is blown through the molten metal. The oxygen reacts with the carbon and impurities, causing them to oxidize and form gases that are released. Alloying elements and desired additives can be added at this stage to achieve specific steel properties. Another method is the electric arc furnace (EAF), where an electric arc is used to heat and melt the pig iron, allowing impurities to be oxidized and removed.The advantages of using steel are numerous. Steel is strong, durable, and versatile, making it suitable for a wide range of applications. It has high tensile strength, which means it can withstand heavy loads and pressures. Steel is also resistant to corrosion, making it ideal for construction, infrastructure, and transportation projects. It is a recyclable material, contributing to sustainability and reducing environmental impact. Additionally, steel can be fabricated into various shapes and sizes, allowing for customization and flexibility in design.References:

A. Ghosh and A. Chatterjee, Ironmaking and Steelmaking: Theory and Practice, PHI Learning, 2008.

R.H. Tupkary and V.R. Tupkary, An Introduction to Modern Iron Making, Khanna Publishers, 2010.

J.R. Davis, ed., ASM Specialty Handbook: Carbon and Alloy Steels, ASM International, 1995.

for such more questions on production

https://brainly.com/question/25597694

#SPJ8

ΔH₁ = ΔH₂ - ΔH₃

ΔH₁ = -635.1-(178.3) KJ

ΔH₁ = -813.4 KJ

The balanced redox reaction in the chemical reaction is given below:

40H2S + 48H+ + 16MnO4¯ ---> 5S8 + 16Mn2+ + 64H2O

Balancing the redox reaction:

Solution:

1) Half-reactions:

H2S ---> S8

MnO4¯ ---> Mn2+

2) Balance:

8H2S ---> S8 + 16H+ + 16e¯

5e¯ + 8H+ + MnO4¯ ---> Mn2+ + 4H2O

3) Make the number of electrons equal (note that there are no common factors between 5 and 16 except 1):

40H2S ---> 5S8 + 80H+ + 80e¯ <--- factor of 5

80e¯ + 128H+ + 16MnO4¯ ---> 16Mn2+ + 64H2O <---

factor of 16

4) Thus, the final answer is given below;

40H2S + 48H+ + 16MnO4¯ ---> 5S8 + 16Mn2+ + 64H2O

Oxidation-reduction can simply be defined as a special type of chemical reaction in which the oxidation states of the substrate change.

So therefore, the balanced redox reaction in the chemical reaction is given below:

40H2S + 48H+ + 16MnO4¯ ---> 5S8 + 16Mn2+ + 64H2O

Complete question:

Balance the following redox reaction:

MnO4¯ + H2S ---> Mn2+ + S8

Learn more about oxidation-reduction:

https://brainly.com/question/21851295

#SPJ1

Answer:

To resolve this, we need to place the coefficient “2” in front of the sodium in the reactant, to give the equation shown below. 2 Na (s) + Cl 2 (g) → 2 NaCl (s) In this equation, there are two sodiums in the reactants, two sodiums in the products, two chlorines in the reactants and two chlorines in the products; the equation is now balanced.

Explanation:

The molecules of a liquid substance are closely packed together to each other. So as a result, liquids are denser than gases.

A mass of gas will have a much larger volume compared to the same mass of liquid. This is because it has a much lower density. The density of gaseous oxygen is 0.0014 g/cm3. Density is ρ=Mass Volume. We know that gas will uniformly occupy more space than liquid whatever volume is available to it. On the other hand, solids and liquids, are closely packed as compared to gas and are high-density materials where ρ is relatively constant.

So we can conclude that the molecules of a liquid substance are closely packed together with each other. So as a result, liquids are denser than gases.

Learn more about Density: https://brainly.com/question/1354972

#SPJ1

Answer:

pH = 1.05

Explanation:

A solution of sulfuric acid, H₂SO₄, dissociates in water as follows:

H₂SO₄ → 2H⁺ + SO₄²⁻

That means per mole of H₂SO₄ you will have 2 moles of H⁺

pH = -log [H⁺]

As [H₂SO₄] = 0.045M and [H⁺] = 2×[H₂SO₄]

[H⁺] = 0.090M

pH = -log [0.090M]

D, Li. When combined with Al(s), Li+ is more likely to be reduced.

To determine which of the given options would most likely be reduced when combined with Al(s), we can refer to the reduction potential chart. The reduction potential indicates the tendency of a species to gain electrons and undergo reduction.

From the options provided:

A. H+

B. K+

C. Fe

D. Li

Based on the standard reduction potential chart, we can compare the reduction potentials of these species to that of Al. The species with a higher reduction potential than Al is more likely to be reduced.

According to the chart, the reduction potential of Al is -1.66 V. Comparing this to the options:

A. H+ has a reduction potential of 0.00 V.

B. K+ has a reduction potential of -2.92 V.

C. Fe has a reduction potential of -0.44 V.

D. Li has a reduction potential of -3.04 V.

Among the options, the species with the highest reduction potential is Li, with a value of -3.04 V. This means that Li+ has a greater tendency to be reduced compared to Al.

Therefore, the correct answer is option D, Li. When combined with Al(s), Li+ is more likely to be reduced.

Know more about reduction here:
https://brainly.com/question/30281983

#SPJ8

The final temperature of the water is: T_final = 45.0°C

We can use the formula for the specific heat capacity of the water to solve this problem:

q = mcΔT

First, we can calculate the initial energy of the water:

q = mcΔT

q = (10.0 g) (4.184 J/g°C) (25.0°C)

q = 1,046 J

Next, we can calculate the final temperature after absorbing 840 J:

q = mcΔT

840 J = (10.0 g) (4.184 J/g°C) (ΔT)

ΔT = 20.0°C

Therefore, the final temperature of the water is:

T_final = T_initial + ΔT

T_final = 25.0°C + 20.0°C

T_final = 45.0°C

To know more about final temperature, here

brainly.com/question/11244611

#SPJ1

o_o mmmmmmmmmmmmm hjkkkjc

Answer:

I'm not the animal Crossing

The Medal of Honor is the best navy decoration and highest volume.

The President of the USA The Victoria go is the holy grail for Medal of Honor creditors because there are the best in lifestyles. Bearing the inscription For valor and called a VC, this medal turned into first offered for conspicuous bravery' in 1856 and later backdated to the Crimean conflict of 1854. The outstanding service pass is the second maximum army ornament that may be provided to a member of the American military, for intense gallantry and risk of lifestyle in actual combat with an armed enemy force.

The Bronze Star Medal dates lower back to world battle II. these days, it is the fourth-maximum ranking award a provider member can obtain for a heroic and meritorious deed performed in an armed battle. For individuals who acquire the BSM, it's far a sign of their sacrifice, bravery, and honor at the same time as serving their us of a

Learn more about medals here:-https://brainly.com/question/17634999

#SPJ9

C. flow under dense and become more thick.

A substance that is tightly packed or has a high density.

The term "density" refers to the relationship between a substance's mass and the volume it takes up in space (volume). The mass, size, and arrangement of an object's atoms influence its density. The ratio of a substance's mass to its volume is said to be its density, or D.

Because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. An object will frequently float as long as its density is less than that of the liquid.

To know more about dense visit:

https://brainly.com/question/26364788

#SPJ1

Ionic bonding is a type of chemical bond that occurs when electrons are transferred between atoms to form ions. The resulting ions are attracted to each other by their opposite charges and form an ionic compound. Here is a summary of the information you provided:

Element: Na (sodium)

Number of valence electrons: 1

Dot structure: Na

Transfer of electrons: Na loses 1 electron to become Na+

Ions formed: Na+ and Cl-

Compound formed: Sodium chloride (NaCl)

Name of compound: Salt

Element: F (fluorine)

Number of valence electrons: 7

Dot structure: F

Transfer of electrons: F gains 1 electron to become F-

Ions formed: F- and Mg2+

Compound formed: Magnesium fluoride (MgF2)

Element: O (oxygen)

Number of valence electrons: 6

Dot structure: O

Transfer of electrons: O gains 2 electrons to become O2-

Ions formed: Ba2+ and O2-

Compound formed: Barium oxide (BaO)

Element: Li (lithium)

Number of valence electrons: 1

Dot structure: Li

Transfer of electrons: Li loses 1 electron to become Li+

Ions formed: Li+ and Cl-

Compound formed: Lithium chloride (LiCl)

Element: P (phosphorus)

Number of valence electrons: 5

Dot structure: P

Transfer of electrons: P gains 3 electrons to become P3-

Ions formed: Al3+ and P3-

Compound formed: Aluminum phosphide (AlP)

Element: N (nitrogen)

Number of valence electrons: 5

Dot structure: N

Transfer of electrons: N gains 3 electrons to become N3-

Ions formed: Al3+ and N3-

Compound formed: Aluminum nitride (AlN)

Answer:

Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹

Explanation:

Argon is a monoatomic gas that behaves as an ideal gas at 298K.

Using the first law of thermodinamics you can obtain:

Work, Q, for constant pressure molar heat capacity,CP:

CP = (5/2)R

For constant-volume molar heat capacity,CV:

CV = (3/2)R

That means:

2CP/5 = 2CV/3

3/5 = CV / CP

As CP of Argon is 20.79 J K ⁻¹mol⁻¹, CV will be:

3/5 = CV / CP

3/5 = CV / 20.79 J K ⁻¹mol⁻¹

12.47 J K ⁻¹mol⁻¹ = CV

Answer:

The solubility of the gaseous solute decreases

Explanation:

As we know, pressure decreases with altitude. This means that, at higher altitudes, the pressure is much lower than it is at sea level.

The solubility of a gas increases with increase in pressure and decreases with decrease in pressure.

Hence, in Denver, Colorado where the elevation is about 5,280 feet above sea level, a gaseous solute is less soluble than it is at sea level due to the lower pressure at such high altitude.

The mass of \(H_2\) that will be formed when 35.25 g Al reacts with excess hydrochloric acid would be 3.93 g.

The equation of the reaction of aluminum metal with hydrochloric acid to produce hydrogen gas is represented below:

\(2Al + 6HCl -- > 2AlCl_3 + 3H_2\)

From the equation, one would see that the mole ratio of aluminum to the hydrogen gas produced is 2:3.

Now, with 35.25 g of aluminum, recall that: mole = mass/molar mass.

The molar weight of aluminum is 27 g/mol.

Thus:

Mole of 35.25 g Al = 35.25/27

                                = 1.31 mol

From the mole ratio, the mole of hydrogen that will be produced would be:

3/2 x 1.31 =1.97 mol

The molar mass of \(H_2\) is 2 g/mol, the mass of 1.97 mol hydrogen gas can be calculated as:

Mass = mole x molar mass

         = 1.97 x 2

        = 3.93 grams

In other words, the amount of \(H_2\) that would be formed when 35.25 g All reacts with excess hydrochloric acid would be 3.93 g.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

Answer:

B

Explanation:

The molar mass is 176.1 g/mol , and Ka for vitamin C is  1.03 x 10⁻⁴

The equation for the reaction is as shown in the attached diagram below

the reaction of Sodium Hydroxide, NaOH with ascorbic acid, C₆H₈O₆ is similar to the reaction of Potassium Hydroxide, KOH with ascorbic acid as show

C₆H₈O₆  +  KOH     ⇒     C₆H₇O₅K    +   H₂O

to produce one mole of potassium ascorbate and water

now,

0.1103 M KOH is contained in 1000mL

x moles is contained in 20mL

cross multiply making x the subject

No of moles of KOH = (0.1103 x 28.42)/1000 = 0.003135 moles

or

Moles of KOH = 0.1103 x 0.02842 L = 0.003135  = moles ascorbic acid

Molar mass = 0.552 g / 0.003135 mol = 176.1 g/mol

Moles of ascorbic acid = 0.552 / 176.1 =0.00313

moles NaOH = 0.0100 L x 0.1103 =0.001103

C₆H₈O₆ + OH⁻ >> C₆H₇O₆⁻ + H2O

Moles ascorbic acid in excess = 0.00313 - 0.001103 = 0.002027

Moles C₆H₇O₆⁻ = 0.001103

total volume = 20 + 10 = 30 mL = 0.030 L

concentration ascorbic acid = 0.002027 / 0.030 =0.0676 M

concentration C₆H₇O₆⁻ = 0.001103 / 0.030 =0.0368 M

pH = pKa + log [C₆H₇O₆⁻] / [C₆H₈O₆]

3.72 = pKa + log 0.0368 / 0.0676

3.72 = pKa - 0.264

pKa =3.984

Ka = 10^-3.984

=1.03 x 10⁻⁴

Your question is incomplete most probably your full question was

A 0.552-g sample of ascorbic acid was dissolved in water to a total volume of 0.20 mL and titrated with 0.1103 M KOH. The equivalence point occurred at 28.42 mL. The pH of the solution at 10.0mL of added base was 3.72. From this data, determine the molar rmass and Ka for vitamin C.

To look more about molar mass click here

brainly.com/question/12127540

#SPJ4

The force applied to the rocket by its engines remains constant as it moves up, while its mass decreases, resulting in an increase in acceleration.

Newton's laws of motion provide an explanation for the acceleration of a rocket as it moves away from the ground. According to Newton's second law, the force exerted on an object is directly proportional to its acceleration, and the force required to move an object increases as its mass increases.

In the case of a rocket, its mass decreases as it consumes fuel, which means that less force is required to move it as it climbs higher into the atmosphere.

As the rocket moves up, its acceleration increases while the force exerted on it remains constant. Newton's second law of motion explains that the acceleration of an object is directly proportional to the force applied to it. According to the second law of motion, an object's acceleration is equal to the force exerted on it divided by its mass.

This means that as the rocket climbs higher and its mass decreases due to the consumption of fuel, less force is required to accelerate it, and so its acceleration increases. In other words, the rocket's acceleration is increasing because the force required to move it is decreasing due to the decreasing mass of the rocket.

This phenomenon is also related to Newton's third law of motion, which states that every action has an equal and opposite reaction. The force exerted by the rocket's engines is balanced by an equal and opposite force exerted on the rocket by the exhaust gases, according to this law.

For more such questions on acceleration visit;

https://brainly.com/question/26590057

#SPJ8

Answer:

Different types of generators are used to create energy. Electrical energy is caused by moving electric charges called electrons. Electricity is a type of energy that comes from electrical energy. ... In power stations, turbines are turned using energy from sources such as heat, wind and moving water.

Explanation:

The predominant form of ethylenediamine at pH 6.184 is H2NCH2CH2NH+3.

At pH 6.184, which is slightly acidic, the amino groups in ethylenediamine (H2NCH2CH2NH2) can partially protonate, resulting in the formation of ammonium ions (H+3NCH2CH2NH+3). The equilibrium between the neutral form and the protonated form is pH-dependent.

Therefore, at pH 6.184, the predominant form of ethylenediamine is H2NCH2CH2NH+3.

Answer:

\(-23592.19\ \text{J/mol}\)

Explanation:

T = Temperature = 309 K

\(\Delta G^{\circ}\) = Standard Gibbs free energy = -65.0 kJ/mol

R = Gas constant = 8.314 J/mol K

\([H^+]\) = Biological standard state has hydrogen ions = \(10^{-7}\ \text{molar}\)

Reaction quotient is given by

\(Q=\dfrac{1}{[H^+]}\\\Rightarrow Q=\dfrac{1}{10^{-7}}\\\Rightarrow Q=10^7\)

Standard biological Gibbs free energy is given by

\(\Delta G=\Delta G^{\circ}+RT\ln Q\\\Rightarrow \Delta G=-65000+8.314\times 309\times \ln10^7\\\Rightarrow \Delta G=-23592.19\ \text{J/mol}\)

The standard biological Gibbs free energy of the reaction is \(-23592.19\ \text{J/mol}\)

Answer:

B

Explanation:

Answer:

B.

radiant ---> thermal

Explanation:

Answer:

B and C

Explanation:

at least i think so, solar panels r used for the sun, and ultrasound is x-ray. Im not sure tho, pls correct me if im wrong

There are several physical methods that can be used to monitor the rate of a chemical reaction are; Spectrophotometry, Conductometry, and Turbidity measurement

Spectrophotometry involves measuring the changes in the intensity of light absorbed or transmitted by a solution during a chemical reaction. Spectrophotometers are used to measure the amount of light absorbed or transmitted by a sample at different wavelengths.

Conductometry  involves measuring the changes in electrical conductivity of a solution during a chemical reaction. Conductivity meters are used to measure the electrical conductivity of a solution, which can change as the concentration of ions in the solution changes during a chemical reaction.

Turbidity measurement involves measuring the changes in the clarity or turbidity of a solution during a chemical reaction. Turbidimeters or nephelometers can be used to measure the amount of light scattered by a sample, which can change as particles form or dissolve during a reaction.

To know more about Spectrophotometry here

https://brainly.com/question/31440604

#SPJ1

--The given question is incomplete, the complete question is

"What are the physical methods of monitoring the rate of a chemical reaction?"--

Answer:

Explanation:

Two pyruvate molecules remain at the end of glycolysis and are still very rich in energy that can be extracted. Although no ATP is directly produced during pyruvate oxidation, it is the next stage in the process of converting the residual energy into ATP

This process happens in the matrix, the mitochondria's deepest chamber, in eukaryotes. It takes place in the cytoplasm of prokaryotes. Overall, pyruvate oxidation transforms the three-carbon molecule into the two-carbon molecule acetyl CoA CoAstart text, C, o, A, end text, which is attached to Coenzyme A. This results in a NADH NADHstart text, N, A, D, H, end text and the release of one carbon dioxide molecule. In the subsequent step of cellular respiration, acetyl CoA CoAstart text, C, o, A, end text serves as fuel for the citric acid cycle.

Explanation:

By Factor Theorem,

(2)^m - 3(2)^(m-1) + 4(2) - 4 = 0.

=> 2^m - 1.5 * 2^m + 4 = 0

=> 4 - 0.5 * 2^m = 0

=> 0.5 * 2^m = 4

=> 2^m = 8

=> m = 3.

Hence the value of m is 3.

Answer:

Br-CH2-CH(CH3)2-C(Cl)H-CH(CH3)2-CHO

Explanation:

The molecule has a total of 14 carbon atoms, 13 hydrogen atoms, and 1 bromine atom. The carbon atoms are arranged in a chain with a methyl group attached to the second carbon atom, a chlorine atom attached to the third carbon atom, and two methyl groups attached to the fourth carbon atom. The fifth carbon atom has a carbonyl group attached to it.

The molecule is an aldehyde, which means that it has a carbonyl group (C=O) at the end of the chain. The carbonyl group is polar, and the oxygen atom has a partial negative charge. The hydrogen atom has a partial positive charge. This polarity makes the aldehyde group susceptible to nucleophilic attack.

The bromine and chlorine atoms are both electrophilic, which means that they have a partial positive charge. This makes them susceptible to nucleophilic attack.

The methyl groups are non-polar and do not have any significant reactivity.

The molecule is a chiral molecule, which means that it has a mirror image that is not superimposable on itself. This is because the carbon atom with the carbonyl group is attached to four different groups.

The molecule is a liquid at room temperature and has a strong odor. It is used in a variety of products, including perfumes, flavorings, and plastics.

A solution containing alcohol and water. If the mole fraction of water is 0.600, 0.4 is the mole fraction of alcohol.

A mole fraction is a measurement of concentration that is equal to the product of the moles of a component and the total moles of the solution.

Mole fraction is indeed a unitless phrase since it represents a ratio. When all the parts of a solution's mole fraction are summed up, they equal one.

moles fraction of water + mole fraction of alcohol =1

0.600+ mole fraction of alcohol =1

mole fraction of alcohol= 1-0.600

                                       =0.4

Therefore, 0.4 is the mole fraction of alcohol.

To know more about mole fraction, here:

https://brainly.com/question/29808190

#SPJ1