CHEGG An Ideal gas of 3.17 moles at a temperature of 54.6 . The molar mass of the gas is 85.0 . Determine the average kinetic energy of a molectule in this gas (in ) ( )
Answers
The expression for the average kinetic energy of a molecule in a gas is given by the equation:`K.E = (3/2) * (R) * (T)`where `R` is the gas constant and `T` is the temperature of the gas.
Assuming the units of temperature and gas constant are in Kelvin and Joules per mole-Kelvin, respectively. The average kinetic energy of a molecule in this gas can be calculated as follows:
Step 1: Calculate the gas constant `R` using the given molar mass of the gas.`R = 8.314 J/mol-K` (gas constant)For one mole of the gas, the mass of the gas is equal to its molar mass which is 85.0 g/mol.Therefore, the number of moles of the gas `n` is given by: `n = 3.17 moles`The mass of the gas `m` in grams is given by: `m = n * M`where `M` is the molar mass of the gas. Substituting the values:`m = 3.17 moles * 85.0 g/mole = 269.45 g`
Step 2: Convert the mass of the gas from grams to kilograms.`m = 269.45 g = 0.26945 kg`
Step 3: Convert the temperature of the gas from `54.6°C` to Kelvin.`T = 54.6°C + 273.15 = 327.75 K`
Step 4: Calculate the average kinetic energy of a molecule in this gas.`K.E = (3/2) * (R) * (T)` Substituting the values:`K.E = (3/2) * (8.314 J/mol-K) * (327.75 K) = 32,789.8 J/mol` Therefore, the average kinetic energy of a molecule in this gas is `32,789.8 J/mol` (joules per mole).
To know more about kinetic energy refer to:
https://brainly.com/question/7694005
#SPJ11
Related Questions
Which of the following is incorrect regarding So2?
-it is a respiratory irritant
-it can adversely affect plant tissue
-it has only anthropogenic sources
-it results from the combustion of coal and oil
-it is a corrosive gas
Answers
The incorrect statement regarding SO2 is: "It has only anthropogenic sources." SO2, or sulfur dioxide, is a color less gas with a pungent odor.
It is known to be a respiratory irritant, adversely affecting both humans and plant tissues. It is primarily produced by the combustion of coal and oil, particularly in industrial processes and power generation. SO2 is released into the atmosphere as a result of these activities, contributing to air pollution. Additionally, SO2 is known to be a corrosive gas, causing damage to materials such as metals and stone structures.
To learn more about SO2 click here: brainly.com/question/31477991
#SPJ11
Where do convection currents occur?
A.
In areas with the same temperature
B.
In areas with different air pressures
C.
In areas with the same altitude
D.
In areas with different cloud types
Answers
Answer:
a because where the air travels for example a radiator
Answer:
C.
In areas with the same altitude
Explanation:
Which two Archaeal replication initiator proteins are thought to be same as in eukaryotes?
SeqA/DnaA
Cdc6/Cdt1
DnaA/Orc1
Orc1/Cdc6
Answers
The two Archaeal replication initiator proteins that are thought to be the same as in eukaryotes are Cdc6/Cdt1 and Orc1.
In Archaea, Cdc6 (Cell Division Cycle 6) and Cdt1 (Chromatin licensing and DNA replication factor 1) are involved in the initiation of DNA replication, functioning similarly to their eukaryotic counterparts. They both help in the recruitment and assembly of the replicative helicase onto the origin of replication.
Similarly, Orc1 (Origin Recognition Complex 1) is a crucial protein in both Archaea and eukaryotes for recognizing and binding to the origin of replication. In eukaryotes, the ORC complex consists of six subunits (Orc1-6), whereas in Archaea, it is simplified and usually represented by a single Orc1 protein or a few homologs.
Both Cdc6/Cdt1 and Orc1 proteins in Archaea exhibit homology and functional similarity with their eukaryotic counterparts, supporting the idea of a conserved mechanism in the initiation of DNA replication across these domains of life.
You can learn more about eukaryotes at: brainly.com/question/30335918
#SPJ11
This question is about calcium hydroxide.
Ancient artworks and monuments can be protected from acid rain if the surface is sprayed with
calcium hydroxide nanoparticles.
Calcium hydroxide has the formula Ca(OH)2
Why are there two hydroxide ions for each calcium ion in the formula?
Answers
Due to the fact that calcium have a 2+ charge but hydroxide ions have only a single -ve charge, the formula requires at least two hydroxide ions must equal out each calcium ion's charge.
What is the purpose of hydroxide?
Manufacturers use the chemical sodium hydroxide to create items including soap, polyester, paper, explosives, pigments, and petroleum products. Other applications for sodium hydroxide include the processing of cotton fibers, metal cleaning and processing, oxide coatings, etching, and electrolytic extraction.
What sort of hydroxide is that?
Sodium hydroxide, NaOH, sometimes referred to as sodium hypochlorite or lye, is crucial for industry. Alkaline earth metals calcium, barium, and barium all create solubility hydroxides that are powerful bases but also less persistent than the alkalies.
To know more about hydroxide visit:
https://brainly.com/question/4251554
#SPJ1
how does the body and brain react when u are developing feelings for someobody?
Answers
Wish you the best of luck for whoever you have feelings for :)
does this image show a physical or chemical change?
Answers
Answer:
Physical
Explanation:
When a substance changes from liquid to gas it's a physical change. There is no chemical reaction between the rubbing alcohol or anything else that would change it's chemical composition.
: Rank the following weak acids from strongest (on the top) to weakest (on the bottom). Drag and drop to order 1 = E propanoic acid 2 = A acetic acid 3 = D hydrocyanic acid 2 = A acetic acid = D hydrocyanic acid = B chlorous acid = c formic acid
Answers
The ranking is as shown below:
1 = D hydrocyanic acid
2 = C formic acid
3 = E propanoic acid
4 = A acetic acid
5 = B chlorous acid
1 = D hydrocyanic acid
2 = C formic acid
3 = E propanoic acid
4 = A acetic acid
5 = B chlorous acid
Here's the explanation behind the ranking:
Hydrocyanic acid (HCN) is the strongest weak acid on the list due to the high electronegativity of nitrogen, which draws electron density away from the hydrogen atom and makes it more acidic.
Formic acid (HCOOH) is the second strongest weak acid due to the presence of the carboxylic acid functional group (-COOH), which is more acidic than a single -OH group found in alcohols and phenols.
Propanoic acid (CH3CH2COOH) is weaker than formic acid due to the longer carbon chain, which stabilizes the negative charge on the conjugate base.
Acetic acid (CH3COOH) is weaker than propanoic acid due to the electron-withdrawing effect of the carbonyl group (C=O), which decreases the electron density on the carboxylic acid functional group and makes it less acidic.
Chlorous acid (HClO2) is the weakest weak acid on the list, as it is a very weak acid that barely ionizes in water.
Click the below link, to learn more about Strong and Weak Acids:
https://brainly.com/question/29375659
#SPJ11
a certain mineral crystallizes in the cubic unit cell shown below. m represents the cations and a represents the anions. what is the empirical formula of the mineral?
Answers
The empirical formula of the mineral is MA
The simplest whole number ratio of atoms in a compound serves as the empirical formula for that compound. Sulfur monoxide and disulfur dioxide both have empirical formulas that are as straightforward as SO and S2O2, respectively. This provides a straightforward illustration of the idea. Thus, the empirical formula for the sulphur and oxygen compounds sulphur monoxide and disulfur dioxide is the same. The number of atoms in each molecule of a chemical compound is expressed by its molecular formula, which is different for the two substances. The arrangement. or number. of atoms. are not mentioned. in an empirical. formula. It is typical for numerous macromolecules, including silicon dioxide, as well as ionic chemicals like calcium chloride (CaCl2) (SiO2).
Learn more about empirical formula here:
https://brainly.com/question/14044066
#SPJ4
11 GRAMS of an electrolyte was dissolved in 44 grams of water, the resulting solution
was found to have a molarity of 0.497 mol/L. The freezing point of the solution was
determined to be -2.92°C. The freezing point depression constant for water is -1.86°C
and pure water may be assumed to freeze at 0°C. If the molecular weight of the
electrolyte is 106.8 g/mol and it takes 33 minutes to perform the experiment, what is
the molarity of the solution in mol/L? Enter a numeric answer only
Answers
The molarity of the solution is 0.234 mol/L
What is the molarity of a solution?The molarity of a solution is the amount in moles of a solute dissolved in a given volume of solvent.
Molarity = number of moles/ volume of solution in litersThe molarity of the solution is determined as follows:
Number of moles of electrolyte = mass/molar massmass of electrolyte = 11 g
molar mass of electrolyte = 106.8 /mol
Number of moles of electrolyte = 11/106.8 = 0.0103 moles
Volume of water = mass/densitydensity of water = 1 g/cm³
mass of water = 44 g
Volume of water = 44/1 = 44 ml or 0.044 L
Molarity of solution = 0.0103/0.044
Molarity of solution = 0.234 mol/L
In conclusion, the molarity of the solution is determined from the moles of solute and volume of solvent.
Learn more about molarity at: https://brainly.com/question/22283918
#SPJ1
the density of aluminum is 2.70g/cm^.
what is the mass of a solid piece of aluminum with a volume of 1.50 cm^3?
Answers
Answer:
4.05 g
Explanation:
density ×volume =mass
I WILL GIVE YOU BRAINLIEST PLEASE ANSWER ASAP NEED HELP!!!!!!!
I WILL GIVE YOU BRAINLIEST PLEASE ANSWER ASAP NEED HELP!!!!!!!
I WILL GIVE YOU BRAINLIEST PLEASE ANSWER ASAP NEED HELP!!!!!!!
what are the oxidation numbers for manganese and nitrogen in Mn3N4
Answers
Explanation:
I think
maganese is +7 and Nitrogen is +5
sorry if I am incorrect I haven't done chemistry in a year
btw for chemistry if you need help with equations I used this equation balancer called chemical aid it helps
In Mn3N4, the compound consists of three manganese (Mn) atoms and four nitrogen (N) atoms.
To determine the oxidation numbers, we can assign x as the oxidation number for manganese and y as the oxidation number for nitrogen.
Since the compound is neutral overall, the sum of the oxidation numbers must equal zero.
For the three manganese atoms:
3x = 0
x = 0
For the four nitrogen atoms:
4y = 0
y = 0
Therefore, the oxidation numbers for manganese (Mn) and nitrogen (N) in Mn3N4 are both 0.
2072 Set D Q.No. 2 Which one has higher concentration and why? [1+1] a. 80 g/litre NaOH solution and 3 M NaOH solution. [1]
b. 5.3 g/litre Na2CO3 and N/10 Na2CO3 solution. [1]
Answers
Answer:
a. To compare the concentration of 80 g/litre NaOH solution and 3 M NaOH solution, we need to convert one of the concentrations to the other unit.
One mole of NaOH weighs 40 grams. So, to convert 80 g/litre NaOH to Molarity, we can divide 80 g/litre by 40 g/mol to get:
80 g/litre NaOH = 2 M NaOH
Therefore, 3 M NaOH has a higher concentration than 80 g/litre NaOH solution.
b. To compare the concentration of 5.3 g/litre Na2CO3 and N/10 Na2CO3 solution, we need to first understand what N/10 solution means.
N/10 Na2CO3 means that the solution contains 1/10th of the normal concentration of Na2CO3. The normal concentration of Na2CO3 is the molar concentration of Na2CO3 that corresponds to the formula weight of Na2CO3, which is 106 g/mol.
So, the normal concentration of Na2CO3 is 1 mol/L or 1 M Na2CO3.
Therefore, N/10 Na2CO3 solution has a concentration of 1/10 M Na2CO3.
Now, let's compare the two concentrations:
5.3 g/litre Na2CO3 = (5.3/106) M Na2CO3 = 0.05 M Na2CO3
Since 0.05 M Na2CO3 is greater than 1/10 M Na2CO3, the concentration of 5.3 g/litre Na2CO3 solution is higher than that of N/10 Na2CO3 solution.
Explanation:
Anyone do this worksheet? Answers?
Answers
Answer:
1. Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen
2. Mass of oxygen required = 2000 g of oxygen
3. Moles of CO₂ that will be produced = 40 moles of CO₂
4. Mass of CO₂ that will be produced = 1760 g of CO₂
5. Moles of H₂O that will be produced = 45 moles of H₂O
Explanation:
Balanced equation of the reaction : 2 C₈H₁₈ + 25 O₂ ---> 16 CO₂ + 18 H₂O
1. Mole ratio of Oxygen and C₈H₁₈ = 25 : 2
Moles of oxygen required to react with 5 moles of C₈H₁₈ = 5 × 25/2 moles
Moles of oxygen required to react with 5 moles of C₈H₁₈ = = 62.5 moles of oxygen
2. Mass of oxygen required = number of moles of oxygen × molar mass of oxygen
Molar mass of oxygen = 32.0 g/mol
Mass of oxygen required = 62.5 moles × 32.0 g/mol
Mass of oxygen required = 2000 g of oxygen
3. Mole ratio of CO₂ and C₈H₁₈ = 16 : 2
Moles of CO₂ that will be produced = 5 × 16/2 moles
Moles of CO₂ that will be produced = 40 moles of CO₂
4. Mass of CO₂ that will be produced = number of moles of CO₂ × molar mass of CO₂
Molar mass of CO₂ = 44.0 g/mol
Mass of CO₂ that will be produced = 40 moles × 44 g/mol
Mass of CO₂ that will be produced = 1760 g of CO₂
5. Mole ratio of H₂O and C₈H₁₈ = 18 : 2
Moles of H₂O that will be produced = 5 × 18/2 moles of H₂O
Moles of H₂O that will be produced = 45 moles of H₂O
Predict which surface will melt ice faster. Wood or metal? Why?
Answers
Answer:
I believe wood wood melt it faster. Why, because of how compact it is. It would be warmer. Metal would be a cooler temperature.
Explanation:
The higher the frequency of light, the ___ its wavelength and the ___ its energy.
a. longer, lower
b. longer, higher
c. shorter, lower
d. shorter, higher
Answers
Answer:
c
Explanation:
A child sees a bird in a tree. The child's eyes are 4 ft above the ground and 12 ft from the bird. The child sees the bird at the angle of elevation shown.
Answers
Rounding to the nearest tenth, the bird's approximate height above the ground is 10.1 feet.
Given information,
Distance to the bird = 12ft
The angle of the elevation = 40°
Let's consider a right-angled triangle with the child's eyes as the observer at one vertex, the bird at another vertex, and the height of the bird above the ground as the unknown side (opposite the angle of elevation).
tan(angle) = height of bird/distance to the bird
tan(40°) = height of bird / 12 ft
height of bird = tan(40°) × 12 ft
The approximate value of tan(40°) is 0.8391.
height of bird ≈ 0.8391 × 12 ft ≈ 10.0692 ft
Learn more about height, here:
https://brainly.com/question/29897626
#SPJ1
Your question is incomplete, most probably the full question is this:
A child sees a bird in a tree. The child’s eyes are 4 feet above the ground and 12 feet from the bird. The child sees the bird at an angle of 40°. What is the bird's approximate height above the ground? Round to the nearest tenth.
round 0.000789 to 2 significant figures
Answers
Answer:
0.00079
Explanation:
Any zero after the decimal isn’t a significant figure
While working in a pharmaceutical laboratory, you need to prepare 2.00 L of a 2.15-M NaCl solution. What mass of NaCl would be required to prepare this solution? 8 mass: How would you go about preparing the solution? Place the steps in order from first to last. First step Last step Answer Bank Measure out the desired amount of Naci. Partially fill the flask with water. Dilute the solution, slowly adding water until the desired volume is reached Mix until NaCl dissolves completely. Add the measured NaCl to the 2.00-L volumetric flask.
Answers
The mass of NaCl would be required to prepare this solution is measured as 251.3 g
Volume of the solution = 2.00 L
Molarity of the solution = 2.15 M
Mass of NaCl needed = molarity × volume × molar mass
= 2.15 × 2 × 58.44 g
= 251. 292 g
= 251. 3 g
Steps of formation of solution :
Step 1 : Measure out the desired amount of NaCl .
Step 2 : Add the measured NaCl into 2.00 L volumetric flask .
Step 3 : partially filled the flask with water .
Step 4 : Mix until NaCl dissolve completely .
Step 5 : Dilute the solution , slowly by water until desired volume is reached.
What are the steps involved in creating a solution?Three steps are envisioned energetically for the solid's dissolution into a solvent to form a solution. Step 1: the process of breaking a pure solid into smaller pieces. Step 2: Division of unadulterated dissolvable into isolated particles. Step 3: creating a solution by combining the particles.
What produces a solution?The straightforward response is that the solute and solvent must have comparable intermolecular interactions. When this is the case, the solvent and solute can easily mix so tightly that each solute particle is surrounded by other solute particles, creating a solution.
Learn more about formation of solution:
brainly.com/question/24741
#SPJ4
Hey I'm Chloe,
Does anyone know How many sides and Octagon has?
I Tried Researching it but Nothing came up.
Answers
What should the IUPAC name for a binary covalent compound lack? prefixes Roman numerals an -ide ending the name of a nonmetal.
Answers
The IUPAC name for a binary covalent compound will lack roman numerals.
Binary covalent compound comprises of two elements which forms a
compound through the sharing of electrons.
The sharing of electrons is referred to as covalent bonding and naming such
compounds require prefixes such as mono-, di- , tri- etc.
The standard method of naming these compounds should be with the
prefixes and not with the roman numerals.
An example is carbon(IV)oxide which is wrong in IUPAC naming.
Read more on https://brainly.com/question/16731560
Answer:
B
Explanation:
Just did the test on edge 2021
Water 3.0 deals mainly with sewage treatment.
Describe which chemicals are currently not broken down by currently
used wastewater technologies and why that is important.
Answers
Water 3.0 deals mainly with sewage treatment. The primary aim of this project is to reduce the harmful impacts of chemical pollutants from industrial and agricultural activities on natural water resources.
Currently, used wastewater treatment technologies can break down some of the chemicals in wastewater but not all of them. Chemicals that are not broken down are referred to as persistent organic pollutants. These chemicals persist in the environment for long periods, and they can cause severe damage to aquatic life and human health.
Currently, the primary challenge facing water treatment technologies is the removal of persistent organic pollutants such as pesticides, pharmaceuticals, and endocrine-disrupting chemicals from wastewater.
These pollutants are generally water-soluble and resist microbial degradation, making them hard to remove from wastewater using current water treatment technologies. For example, conventional activated sludge treatment used in wastewater treatment plants does not remove some persistent organic pollutants from wastewater.
Failure to remove these pollutants from wastewater can have significant environmental and health impacts.
For example, pharmaceutical chemicals can cause antibiotic resistance, while endocrine-disrupting chemicals can cause birth defects, cancer, and other health problems.
Therefore, there is a need to improve wastewater treatment technologies to remove persistent organic pollutants from wastewater.
In conclusion, wastewater treatment technologies can break down some chemicals but not all. Chemicals that are not broken down are persistent organic pollutants and pose a significant risk to the environment and human health. Therefore, it is important to develop wastewater treatment technologies that can remove these pollutants from wastewater.
To know more about chemicals visit:
https://brainly.com/question/29240183
#SPJ11
a sample of gas occupies a volume of 70.3 ml . as it expands, it does 140.6 j of work on its surroundings at a constant pressure of 783 torr . what is the final volume of the gas?
Answers
A sample of gas occupies a volume of 70.3 ml as it expands, it does 140.6 j of work on its surroundings at a constant pressure of 783 torr and the final volume of the gas is 11.12L
A gas is a sample of matter that conforms to the shape of a container in which it is held and acquires a uniform density inside the container and even in the presence of gravity and regardless of the amount of substance in the container
Here given data is 11.12L
V₁ = Initial volume = 70.3 ml = 0.0703ml = (1L=1000ml)
w = 140.6 J = 1.387 J = (1Latm=101.3J)
Pressure = 783 torr = 1.03 atm = (1atm=760 torr)
V₂ = final volume = ?
1.387Latm = 1.03 atm × (V₂ - 0.0703ml)
(V₂ - 0.0703ml) = 11.05
V₂ = 11.12L
The final volume of the gas is 11.12L
Know more about volume
https://brainly.com/question/14832112
#SPJ1
10 sentence Summary about the Seasons on Earth
Answers
Seasons on the Earth can be defined as the period or time of year which is characterized by several factors like weather, and temperature occurring. The tilt of the Earth's axis causes the seasons.
Earth has four types of seasons namely - Summer season, Rainy season, Autumn season, and Winter season.
Summer season starts in the month of April and lasts till the month of June. It is usually the hottest season out of all four seasons. The days are longer and the nights are shorter in this season.
The second season is the Rainy season which arrives in the month of June and last till the month of September. This season is the Wet season of the year because in rainy seasons there are rain showers all over. It is also known as the Monsoon season. As the monsoon arrives, there is relief from high daytime temperatures and night temperature also drops. Monsoons are important for vegetation to grow and also important for human beings.
The third season is the Autumn season which begins after the monsoon season and ends before the winter season. This is in the month of September till the end of October. The length of day and night are equal.
The last season on the Earth is the Winter season. This season occurs after the Autumn season and before the arrival of Spring. Winter is the coldest season of the year. The length of nights is longer than the length of days in the winter season.
Learn more about seasons:
https://brainly.com/question/19009677
#SPJ1
build a prototype or test model of the invention
Answers
calculate the molarity of 1.75l o2 in 0.375l h2o.
Answers
It is not possible to calculate the molarity of oxygen in water based on the given information.
To calculate the molarity of a solute in a solution, we need to know the number of moles of the solute and the volume of the solution.The problem statement provides the volume of oxygen gas (1.75 L) but does not provide information on the number of moles of oxygen gas or the volume of water.
Additionally, we would need to know if any oxygen gas has actually dissolved in the water to form a solution.Therefore, we cannot calculate the molarity of oxygen in water based on the given information.
To know more about molarity refer here
brainly.com/question/31545539#
#SPJ11
Use your understanding of the terms "soluble" and "insoluble" to explain why you must shake a bottle of salad dressing made with oil and vinegar before you use it.
Answers
Answer:
See explanation
Explanation:
In chemistry, the idea of "like dissolves like" is of utmost importance. A substance is only soluble in another with which it can effectively interact.
We must note that to be "soluble" means that the solute actually interacts effectively (dissolves) in the solvent.
However, vinegar is a polar substance while oil is a non polar substance hence the two can not effectively interact. That is, the vinegar can not dissolve in oil.
The two will separate into two phases upon standing. Therefore, the bottle of salad dressing made with oil and vinegar must be shaken in order to mix the two thoroughly before it is used.
The velocity (speed) of an object was determined to be 45 miles per
hour. Convert this speed to kilometers per hour if one kilometer equals
0.62 miles. *
Please show work thanks you
Answers
Answer: 72.58 km/hr
Explanation:
\(\frac{45 miles}{1 hour}\)×\(\frac{1 km}{0.62 miles}\) = 72.58 km/hr
Answer:
it is 72.9 km/h
Explanation:
just multiply 45 * 1.62 = ~72.9
What is the first step in the environmental policy process?
Identify the problem
identify specific causes of the problem
Envision a solution and set goals
Get organized
Answers
PLEASE HELP 100 POINTS!!!! AND GIVING BRAINLIEST!!!!!!!!
Why should a movie producer consider filming a new version of The First Men in the Moon? Create a 6-8 slide multimedia presentation to market your idea for this movie to a production company. Rubric Criteria Points Possible 20 (10) 11-19 (6-9) 6-10 (3-5) 0-5 (0-2) Points Earned Ideas & Content Relates Theme of Novel Provides analysis of character Accurate diagram of plot 20 Establishes a theme, relates an analysis of the protagonist, effectively summarizes the plot, and maintains a clear focus throughout. Establishes a theme, identifies some character traits of the protagonist, provides a summary of the plot, and maintains focus throughout. There are a few lapses in focus, but the theme is fairly clear. Presents somewhat of an analysis of character. The plot summary is mostly correct. It is difficult to figure out the theme of the novel. The character analysis is poor or not present. The plot summary does not accurately represent the story. Organization Structure Precision Focus 20 Strong organization; seamless transitions between ideas; Effective and precise content. Organization is appropriate but conventional; Attempt at a focused and precise sales pitch. Attempts at organization, inappropriate use of lists or bullets; content is unfocused and ideas are not developed No clear organizational framework or transitions. Ideas are vague or unfocused Voice Personality Sense of audience 20 Strong awareness of audience in the design. Students can clearly explain why they felt the vocabulary, audio and graphics chosen fit the target audience. Some awareness of audience in the design. Students can partially explain why they felt the vocabulary, audio and graphics chosen fit the target audience. Some awareness of audience in the design. Students find it difficult to explain how the vocabulary, audio and graphics chosen fit the target audience. Limited awareness of the needs and interests of the target audience. Images and Music Relevance to theme Effectiveness Imagery 10 Images and music stir a rich emotional res
Answers
Answer:-Science have researched more facts and cool things about it-It would have more facts and things to learn-The quality would be better and more understandingI just tried 3 quick ideas I hope it can help a bit
Explanation:
Answer:
the answer is you should know this already :)))))))))))))))))))))))))))))))))))))))))))))))))))
PLEASE HELP 100 BRAINLIST!!!!
According to the activity series of metals, which of the reactions below will not take place?
Zn + MgCl2 → Mg + ZnCl2
Li + AgNO3 → Ag + LiNO3
2NaCl + Ca → CaCl2 + 2Na
Pb(NO3)2 + Ni → Ni(NO3)2 + Pb
Answers
In the reactivity series, the metals are listed according to decreasing activity.. In the series of reactivity, Zn comes after Mg. Hence, no reaction can take place since zinc cannot remove magnesium from magnesium sulphate.
What is magnesium sulphate?Magnesium sulphate is a magnesium salt in which the counterion is sulphate. It serves as an anticonvulsant, cardiovascular medication, calcium channel blocker, anaesthetic, tocolytic, anti-arrhythmia medication, painkiller, and fertiliser, among other functions. It consists of a magnesium salt, a metal sulfate, and an organic magnesium salt.Constipation can be temporarily relieved by magnesium sulphate. To treat minor sprains, bruises, muscular aches, joint stiffness, and tired feet, it is also applied as a soaking solution. This medication works as both a laxative and soaking liquid.Magnesium Sulfate Injection is used to treat low levels of magnesium in the blood when oral medication is not an option.To learn more about magnesium sulphate, refer to:
https://brainly.com/question/20522523
#SPJ1