A twin-engine aeroplane loses both engines. How many feet will it sink in 10 nautical miles if its lift-todrag ratio is 23:1?A) 2,600 feet.B) 4,300 feet.C) 2,400 feet.D) 2,300 feet.
Answers
To solve this problem, we need to use the glide ratio formula, which is:
the correct answer is A) 2,600 feet.
Glide Ratio = Distance Covered / Altitude Lost
In this case, the distance covered is 10 nautical miles, which is equivalent to 18,520 feet. We want to find out how much altitude the airplane will lose, so we need to rearrange the formula to solve for altitude lost:
Altitude Lost = Distance Covered / Glide Ratio
The glide ratio is given as 23:1, which means that for every 23 feet forward, the airplane will descend 1 foot. Therefore, the glide ratio can be written as 1/23. Substituting these values into the formula, we get:
Altitude Lost = 18,520 / (1/23) = 424,760 feet
However, we need to convert this value to feet per mile, so we divide by 10:
Altitude Lost = 42,476 feet per mile
Finally, we can find the altitude lost in 10 nautical miles by multiplying the altitude lost per mile by 10:
Altitude Lost = 42,476 x 10 = 424,760 feet
Therefore, the correct answer is A) 2,600 feet.
For such more question on nautical miles
https://brainly.com/question/17038309
#SPJ11
Related Questions
Draw and Explain -in details- a figure (BOD & Time) showing the different behaviors of
treated sewage sample and untreated sewage sample for both carbonaceous and
nitrogenous biochemical oxygen demand, and what do we mean by LAG TIME?
Answers
The lag time is the time it takes for the bacteria to start to break down the organic matter in the sewage. The lag time is longer for the untreated sewage sample because it contains more organic matter.
How to explain the informationCarbonaceous BOD is the amount of oxygen that is required to break down the organic matter in sewage. The organic matter in sewage is primarily made up of carbon, so carbonaceous BOD is also known as biochemical oxygen demand (BOD5).
Nitrogenous BOD is the amount of oxygen that is required to break down the nitrogenous compounds in sewage. The nitrogenous compounds in sewage are primarily made up of ammonia, so nitrogenous BOD is also known as ammoniacal oxygen demand (AOD).
The treated sewage sample has a lower carbonaceous BOD and a lower nitrogenous BOD than the untreated sewage sample. This is because the treatment process removes some of the organic matter and nitrogenous compounds from the sewage.
Learn more about bacteria on
https://brainly.com/question/8695285
#SPJ1
It is okay to lift one end of the vehicle:
A) As long as two swing arms are being used
B) As long as the wheels have been chocked
C) As long as the swing arm restraints are engaged
D) None of the above
Answers
It is okay to lift one end of the vehicle B) As long as the wheels have been chocked.
What is a Safety Procedure?This refers to the processes that are undertaken in order to undertake a task safely, both for the person executing the task and others around.
Hence, we can see that It is okay to lift one end of the vehicle B) As long as the wheels have been chocked
This is because it would enable the vehicle to be safely positioned so the wheels would not roll off and cause an accident.
This safety procedure allows a person to raise one end of a vehicle, if the wheels have been chocked, to keep them in place.
Read more about safety procedures here:
https://brainly.com/question/14367881
#SPJ1
Which of the following best describes how a switch functions?
a. It connects multiple cable segments or devices and forwards frames to the appropriate segment.
b. It connects multiple segments of different architectures. It translates frames and broadcasts them to all of its ports.
c. It connects multiple cable segments or devices and broadcasts frames to all of its ports.
d. It connects multiple segments of different architectures. It translates frames and forwards them to the appropriate segment.
Answers
The switch connects several cable segments or devices together and forwards frames to the desired segment or device. Thus, the correct answer pertains to (a) i.e. ‘It connects multiple cable segments/devices and forwards data frames to the appropriate device’.
The switch is a data link layer network device. The main function of the switch device is to connect multiple devices on the network together in order to enable data transmission between them. The switch forwards data frames selectively to the appropriate device. Before forwarding data frames to the correct destination device, the switch performs error checking. In case errors are found in any data frames, the switch does not forward those data frames to the destination device and discards them.
You can learn more about Switch at
https://brainly.com/question/14683597
#SPJ4
b) Consider a large plane wall of thickness L = 0.4 m, thermal conductivity k = 1.8 W/m·K, and surface area A = 30 m2. The left side of the wall is maintained at a constant temperature of T1 = 90°C while the right side loses heat by convection to the surrounding air at
Answers
Answer:
A is correct
Explanation:
I took the test
Assignment 1: Structural Design of Rectangular Reinforced Concrete Beams for Bending
Perform structural design of a rectangular reinforced concrete beam for bending. The beam is simply supported and has a span L=20 feet. In addition to its own weight the beam should support a superimposed dead load of 0.50 k/ft and a live load of 0.65 k/ft. Use a beam width of 12 inches. The depth of the beam should satisfy the ACI stipulations for minimum depth and be proportioned for economy. Concrete compressive strength f’c = 4,000 psi and yield stress of reinforcing bars fy = 60,000 psi. Size of stirrups should be chosen based on the size of the reinforcing bars. The beam is neither exposed to weather nor in contact with the ground, meaning it is subjected to interior exposure.
• Use the reference on "Practical Considerations for Rectangular Reinforced Concrete Beams"
• Include references to ACI code – see slides from second class
• Include references to Tables from Appendix A
• Draw a sketch of the reinforced concrete beam showing all dimensions, number and size of rebars, including stirrups.
Answers
Answer:
Beam of 25" depth and 12" width is sufficient.
I've attached a detailed section of the beam.
Explanation:
We are given;
Beam Span; L = 20 ft
Dead load; DL = 0.50 k/ft
Live load; LL = 0.65 k/ft.
Beam width; b = 12 inches
From ACI code, ultimate load is given as;
W_u = 1.2DL + 1.6LL
Thus;
W_u = 1.2(0.5) + 1.6(0.65)
W_u = 1.64 k/ft
Now, ultimate moment is given by the formula;
M_u = (W_u × L²)/8
M_u = (1.64 × 20²)/8
M_u = 82 k-ft
Since span is 20 ft, it's a bit larger than the average span beams, thus, let's try a depth of d = 25 inches.
Effective depth of a beam is given by the formula;
d_eff = d - clear cover - stirrup diameter - ½Main bar diameter
Now, let's adopt the following;
Clear cover = 1.5"
Stirrup diameter = 0.5"
Main bar diameter = 1"
Thus;
d_eff = 25" - 1.5" - 0.5" - ½(1")
d_eff = 22.5"
Now, let's find steel ratio(ρ) ;
ρ = Total A_s/(b × d_eff)
Now, A_s = ½ × area of main diameter bar
Thus, A_s = ½ × π × 1² = 0.785 in²
Let's use Nominal number of 3 bars as our main diameter bars.
Thus, total A_s = 3 × 0.785
Total A_s = 2.355 in²
Hence;
ρ = 2.355/(22.5 × 12)
ρ = 0.008722
Design moment Capacity is given;
M_n = Φ * ρ * Fy * b * d²[1 – (0.59ρfy/fc’)]/12
Φ is 0.9
f’c = 4,000 psi = 4 kpsi
fy = 60,000 psi = 60 kpsi
M_n = 0.9 × 0.008722 × 60 × 12 × 22.5²[1 - (0.59 × 0.008722 × 60/4)]/12
M_n = 220.03 k-ft
Thus: M_n > M_u
Thus, the beam of 25" depth and 12" width is sufficient.
use c++ please and do not get some wrong code for me
Introduction
In this lab you will practice using basic input/output, structs, and arrays of structs. Be sure to read this lab thoroughly, especially
the sections of Collaboration and the Hand-in Procedure.
Collaboration
Collaboration amongst students is allowed to the extent outlined in the syllabus. That being the case, the goal of these
assignments is not to share code, but to learn the tools you need to succeed as a computer scientist. Students are expected to
write their own code free of plagiarism from any other student past or current. All assignments will be cross referenced across
all sections of CS135 using the Measure Of Software Similarity (Moss) to automatically determine the similarity of programs.
Refer to the syllabus for further details and consequences of breaking this policy.
Lab
To start your lab you will need a struct to read data into. The struct definition should be placed above main() and below
using namespace std. The struct should be called PurchaseType and contain the following fields:
1. string customerID
2. string productName
3. double price
4. int qtyPurchased
5. double taxRate
Write a complete program that:
1. Uses a user defined function:
void openFile(ifstream& iFile, string prompt)
Which gets the name of a file from the user and opens it into iFile by:
a. Prompting the user for a filename using prompt and reading the filename into a string.
b. Opening the file name obtained in (1a) into iFile, and verifying that it opened. If the file does not open the
program should output an error message and continue from (1a) until a valid file name is entered. See the
example output for error formatting.
i. The file contains strings, integers, and doubles with 5 values per line with 10 lines of data in the file.
Each line of data represents a different item purchased by a customer.
2. Creates an array of instances of the PurchaseType struct to hold the data from the file obtained in (1).
3. Uses a user defined function:
void readFile(ifstream& iFile, PurchaseType purchases[])
Which reads the data from iFile into purchases by:
a. iFile contains rows of data which correspond to the elements of the PurchaseType struct. Iterate through
iFile inserting the rows of data, using str.find() str.substr(), into purchases until eof is hit.
(More steps on next page)
4. Uses a user defined function:
void printPurchaseData(PurchaseType purchases[], int size)
Which prints the data contained in purchases by:
a. Using iomanip to nicely output all the data in a tabular format. You will need to calculate the total price for
each product purchased by multiplying the price of each product by the quantity purchased, and then
multiplying by the (tax rate + 1). See the example output for formatting.
b. Keeping track of each total found and outputting the average total at the end of the table.
c. Keeping track of the count of unique customers and outputting the total unique customers at the end of the
table.
main() should only contain variable declarations and function calls (to your user-defined functions). All data must be read
into an array of PurchaseType structs first, then the required output. You must write all of the functions in this lab, failing to
do so will result in you receiving a 0 for this lab. Failure to use an array of structs will also result in a 0 for this lab. See
the example output for examples and formatting.
Prototypes for your user defined functions are:
1. void openFile(ifstream&, string);
2. void readFile(ifstream&, PurchaseType[]);
3. void printPurchaseData(PurchaseType[], int);
Example Output
An example of an interaction with your program is shown below, your output should match these examples exactly. (The words
printed in blue are from the computer, based on your commands, the words in red are user input. Note: these colors are simply
here to distinguish components and not needed in your program.):
Alexs-iMac:lab11b alex$ g++ -Wall -pedantic -Werror main.cpp
Alexs-iMac:lab11b alex$ ./a.out
Enter file name
**error
Error: Invalid File
Enter file name
**purchases1.csv
+-------------+--------------+-------+----------+----------+-------+
| Customer ID | Product Name | Price | Quantity | Tax Rate | Total |
+-------------+--------------+-------+----------+----------+-------+
| A134CX2 | shirt | 10.00 | 1 | 8.25 | 10.82 |
| A134CX2 | pants | 15.95 | 2 | 8.25 | 34.53 |
| A134CX2 | jacket | 24.49 | 1 | 8.25 | 26.51 |
| 4J37I2I | blouse | 19.99 | 1 | 8.25 | 21.64 |
| 4J37I2I | pants | 14.98 | 1 | 8.25 | 16.22 |
| 4J37I2I | mittens | 9.99 | 3 | 8.25 | 32.44 |
| 4J37I2I | socks | 10.98 | 3 | 8.25 | 35.66 |
| B834621 | gloves | 9.99 | 2 | 7.15 | 21.41 |
| B834621 | cap | 24.99 | 3 | 7.15 | 80.33 |
| 27G8ZZY | earrings | 49.99 | 1 | 8.25 | 54.11 |
+-------------+--------------+-------+----------+----------+-------+
Unique users: 4
Average total: $33.37
Answers
C++ program that fulfills the requirements mentioned in the lab description:
```cpp
#include <iostream>
#include <fstream>
#include <iomanip>
#include <string>
using namespace std;
struct PurchaseType {
string customerID;
string productName;
double price;
int qtyPurchased;
double taxRate;
};
void openFile(ifstream& iFile, string prompt) {
string fileName;
do {
cout << prompt;
cin >> fileName;
iFile.open(fileName);
if (!iFile.is_open()) {
cout << "Error: Invalid File" << endl;
}
} while (!iFile.is_open());
}
void readFile(ifstream& iFile, PurchaseType purchases[]) {
for (int i = 0; i < 10; i++) {
iFile >> purchases[i].customerID >> purchases[i].productName >> purchases[i].price
>> purchases[i].qtyPurchased >> purchases[i].taxRate;
}
}
void printPurchaseData(PurchaseType purchases[], int size) {
cout << "+-------------+--------------+-------+----------+----------+-------+\n";
cout << "| Customer ID | Product Name | Price | Quantity | Tax Rate | Total |\n";
cout << "+-------------+--------------+-------+----------+----------+-------+\n";
double totalPrice = 0.0;
int uniqueCustomers = 1;
for (int i = 0; i < size; i++) {
double total = purchases[i].price * purchases[i].qtyPurchased * (purchases[i].taxRate + 1.0);
totalPrice += total;
cout << "| " << setw(12) << left << purchases[i].customerID
<< "| " << setw(13) << left << purchases[i].productName
<< "| " << setw(5) << right << fixed << setprecision(2) << purchases[i].price
<< " | " << setw(8) << right << purchases[i].qtyPurchased
<< " | " << setw(8) << right << purchases[i].taxRate
<< " | " << setw(5) << right << fixed << setprecision(2) << total
<< " |\n";
if (i < size - 1 && purchases[i].customerID != purchases[i + 1].customerID) {
uniqueCustomers++;
}
}
cout << "+-------------+--------------+-------+----------+----------+-------+\n";
cout << "Unique users: " << uniqueCustomers << endl;
cout << "Average total: $" << fixed << setprecision(2) << totalPrice / size << endl;
}
int main() {
ifstream inputFile;
openFile(inputFile, "Enter file name: ");
PurchaseType purchases[10];
readFile(inputFile, purchases);
printPurchaseData(purchases, 10);
return 0;
}
```
Make sure to save the file with a `.cpp` extension, for example, `lab11b.cpp`. You can compile and run the program using a C++ compiler.
This program prompts the user to enter a file name, opens the file, reads the data into an array of `PurchaseType` structs, and then prints the data in a tabular format, along with the average total and the count of unique customers.
Learn more about C++ program here:
https://brainly.com/question/30905580
#SPJ11
HELP PLEASE!! ASAP!!!!
can some answer this 2 questions please as paragraph i want it nowww it is graded what action should be taken to make it safe ? also the first question
Answers
Actions violated:
Long hair isn't tied upThe girl isn't wearing a lab coatThe girl isn't wearing safety gogglesExtra: There doesn't seem to be an emergency fire blanket in the safeActions to be taken:
Make sure the girl wears a lab coat or kick her outMake sure the girl wears safety goggles or kick her outMake sure her hair is tied up or kick her outEdit: Use these to write your paragraph.
When you park on a hill,the direction your __are pointed determines which direction your car will roll if the breaks fail
Answers
Answer:
Tires or wheels? I think this is the answer. ^_^
Explanation:
Can someone help me plz!!
Answers
On a two-way roadway with a center lane, drivers from either direction can _________ from the center lane.
Answers
2. right turn
3. u-turn
4. frequent stops
definition of ceramics
Answers
Answer:
Ceramics are generally made by taking mixtures of clay, earthen elements, powders, and water and shaping them into desired forms. Once the ceramic has been shaped, it is fired in a high temperature oven known as a kiln. Often, ceramics are covered in decorative, waterproof, paint-like substances known as glazes.
Explanation:
Answer:
made essentially from a nonmetallic mineral (such as clay) by firing at a high temperature.
Explanation:
what is magnetization
Answers
Answer:described by direction and is either Axial or Diametric
Explanation:
Answer:
Magnetization is the density of magnetic dipole moments that are induced in a magnetic material when it is placed near a magnet.
what are advantages of using sinusoidal Voltages
Answers
Answer:
The advantages of using a pure sine wave for your appliances and machinery are as follows: Reduces electrical noise in your machinery.
translates to no TV lines and no sound system hum.
Cooking in microwaves is quicker.
Explanation:
The smoothest signal is a sine wave, and sine waves are the basis of all functions.
Every other continuous periodic function is a basis function, which means that it can be described in terms of sines and cosines.
For instance, using the Fourier series, I can describe the fundamental Sinusoidal frequency and its multiples in terms of the triangle and square waves.
if you want to withdraw $10000 at the end of two years and $35000 at the end of four years, how much should you deposit now into an account that pays 9% interest compounded annually?
Answers
Answer:
490000 dollars
Explanation:
Where is time-to-arm (TA) and time-to-burst (TB) set on the B83?
Answers
The time-to-arm (TA) and time-to-burst (TB) settings on the B83 nuclear bomb are configured through the weapon's fuzing system.
The time-to-arm (TA) and time-to-burst (TB) settings on the B83 nuclear bomb are configured through the weapon's fuzing system.
The fuzing system is responsible for controlling the detonation sequence, and it allows the users to set the TA and TB values based on their desired operational requirements. The TA value ensures the weapon arms itself after a certain time period, while the TB value determines the time at which the weapon will detonate. These settings are crucial for the safe and effective use of the B83 nuclear bomb in various scenarios.
A fuze is a weapon subsystem that activates the warhead mechanism in the vicinity of the target and also maintains the warhead in a safe condition during all prior phases of the logistic and operational chain.
To know more about B83
https://brainly.com/question/31606414
#SPJ11
A shipment of 50 microprocessors of which 4 are defective a. In how many ways can we select a set of four non-defective micro processors? b. In how many ways can we select a set of four micro-processors containing exactly two defective micro-processors? C. In how many ways can we select a set of four micro-processors containing at least one defective micro-processor?
Answers
a) There are 9,900 ways to select a set of four non-defective microprocessors. b) There are 735 ways to select a set of four microprocessors containing exactly two defective microprocessors. c) There are 9,852 ways to select a set of four microprocessors containing at least one defective microprocessor.
a) To select a set of four non-defective microprocessors, we need to choose four out of the 46 non-defective microprocessors available (since 4 out of the 50 are defective). The order of selection doesn't matter. This can be calculated using the combination formula: C(46, 4) = 9,900 ways. b) To select a set of four microprocessors containing exactly two defective microprocessors, we need to choose two defective microprocessors out of the four available and two non-defective microprocessors out of the 46 available. Again, the order of selection doesn't matter. The calculation can be done using the combination formula: C(4, 2) * C(46, 2) = 735 ways.
c) To select a set of four microprocessors containing at least one defective microprocessor, we can subtract the number of ways to select four non-defective microprocessors from the total number of ways to select any four microprocessors. The total number of ways is C(50, 4) = 230,300. Therefore, the number of ways to select at least one defective microprocessor is 230,300 - 9,900 = 220,400 ways. Overall, the calculations involve using combinations to determine the number of ways to select microprocessors based on the given conditions.
Learn more about microprocessors here-
https://brainly.com/question/14708869
#SPJ11
When an arbitrary substance undergoes an ideal throttling process through a valve at steady state, (SELECT ALL THAT APPLY) inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet pressures will be equal. inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet temperatures will be equal.
Answers
Answer:
15x
Explanation:
using the what-if function in excel to make a decision is considered a type of __________.
Answers
Using the 'what-if' function in MS Excel to make a decision is said to be a type of forecast and scenario model.
In MS Excel, the 'what-if' function allows altering the values in cells to check how those changes affect the results. When in Excel the 'what-if' function is used to check to see different results of decisions based on various values of the input, it is considered to be a type of forecast and scenario model.
The forecast and scenario model represents a strategic process for businesses used to plan several potential decision results. These scenarios are forecasted on the basis of visible risks and supposed uncertainties existing in a set of plausible situations. In simple terms, it can be stated that the forecast and scenario model assists to model multiple 'what-if' circumstances to be prepared for the future.
You can learn more about MS Excel at
brainly.com/question/19295387
#SPJ4
Identify the Levels of Biological Organization below. Copy and answer each statement. Write
your answer on the answer sheet provided.
1. The basic unit of a chemical element
2. A group of atoms bonded together representing the smallest
unit that can take part in a chemical reaction.
3. Is a basic unit of life.
4. Group of similar cells that perform a function.
5. Group of tissues that work together to perform to perform
a specific function
6. A group of organs that work together to perform a
specific function.
7. An entire living thing that carries of the basic life functions.
Answers
Answer:
no idea
Explanation:
gvghvvvghhbbgggggggig gjgjg gjgbg gig gg bg GB g GB GB GB GB g GB GB GB of me and I am a diary and crewmate hide if you see a diary or not the other person is a non-electrolyte or no one vent the imposter win a diary or you can get any more confidently than you are in a spectacular place is the most important points to be mo to get skins and crewmate for a few days to be sure it will be the same for me it will take a while for a couple to get the right angle bu the other one is come to the end and then you have birds to get a lot more than a diary of a candle or no other one in a few weeks or no time to do it for me and my friend who has no idea how much time I have been to a new episodes and the best of all the time I am going sleep
3. A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar inlets the coil and after it condensed it exits the coil at same temperature. A solvent which has 2.30 kJ/kg heat capacity is fed to tank at 25 ∘
C with 12 kg/min constant flow rate and it exits the tank with same flowrate. Initially the tank is at 25 ∘
C temperature and includes 760 kg solvent. At t=0 both the heating steam and solvent are feed to the tank. Heat transfer from steam to the solvent is given by the equation Q(kJ/min)=UA( Tsteam-T) Here UA is the product of total heat transfer coefficient and transfer surface and it is equal to 11,5kj/min ∘
C.
Answers
The solvent temperature remains at 25 °C throughout the process, and there will be no change in the solvent's temperature or the overall system.
To analyze the heat transfer process between the steam coil and the solvent in the stirred heating tank, we can calculate the heat transfer rate and the resulting temperature change using the given information.
Given:
Inlet steam pressure: 7.50 bar
Saturated steam exits the coil at the same temperature
Solvent heat capacity: 2.30 kJ/kg
Solvent flow rate: 12 kg/min
Initial tank temperature: 25 °C
Initial solvent mass: 760 kg
Heat transfer equation: Q(kJ/min) = UA(Tsteam - T)
UA (total heat transfer coefficient * transfer surface) = 11.5 kJ/min °C
First, let's calculate the heat transfer rate:
Q = UA(Tsteam - T)
Q = 11.5 * (Tsteam - T)
Since the steam exits the coil at the same temperature as the solvent, we can equate the temperatures:
Tsteam = T
Now, let's substitute the values and solve for Q:
Q = 11.5 * (T - T)
Q = 11.5 * 0
Q = 0 kJ/min
The heat transfer rate is 0 kJ/min, indicating that no heat transfer occurs between the steam coil and the solvent in the tank.
As a result, the solvent temperature remains at 25 °C throughout the process, and there will be no change in the solvent's temperature or the overall system.
Learn more about heat transfer here:
https://brainly.com/question/13433948
#SPJ11
what necessitated the inhabitants of neolithic jericho to construct fortification walls?
Answers
What drove the people of Prehistoric Jericho to build fortress walls Defend against marauding nomads.
What are some prehistoric examples?
The Neolithic Revolution, Neanderthals and Denisovans, Stonehenge, the Ice Age, and other events are all part of prehistory, the vast span of time before written records or human recordkeeping.
The Paleolithic Age is the Stone Age's earliest and longest epoch. This is derived from the Greek words palaios, which means "long ago" or "old," and lithos, which means "stone" – when combined, Paleolithic Era means Old Stone Age. This is what our ancestors may have looked like over three million years ago.
Know more about fortress walls Visit:
https://brainly.com/question/27587706
#SPJ4
pls help me it’s due today
Answers
Answer:
C. 14.55
Explanation:
12 x 10 = 120
120 divded by 10 is 12
so now we do the left side
7 x 3 = 21 divded by 10 is 2
so now we have 14
and the remaning area is 0.55
so 14.55
Two chambers with the same fluid at their base are
separated by a 30-cm-diameter piston whose weight is 25
N. Calculate the gage pressures in chambers A and B
Answers
Answer:
Pgage at A = 101.30354 kPa
Pgage at B = 101.29646 kPa.
Explanation:
To calculate the gauge pressures in chambers A and B, we need to use the formula:
Pressure = Force / Area
where force is the net force acting on the piston and area is the cross-sectional area of the piston.
First, let's calculate the net force acting on the piston. We know that the weight of the piston is 25 N, which is acting downwards. We also know that the piston is in equilibrium, so the net force acting on it is zero. Therefore, there must be an upward force acting on the piston that is equal in magnitude to the weight of the piston. This upward force is the pressure difference between the two chambers pushing up on the piston.
The area of the piston is given by:
Area = pi * (diameter/2)^2
= pi * (30 cm / 2)^2
= 706.9 cm^2
Now we can calculate the pressure difference between the two chambers:
Pressure difference = Force / Area
= 25 N / 706.9 cm^2
= 0.0354 N/cm^2
Since the fluid in both chambers is at the same level, the pressure in chamber A is equal to the atmospheric pressure plus the pressure difference, and the pressure in chamber B is equal to the atmospheric pressure minus the pressure difference. Assuming the atmospheric pressure is 101.3 kPa, we can calculate the gauge pressures in chambers A and B as follows:
Pressure in A = Atmospheric pressure + Pressure difference
= 101.3 kPa + 0.0354 N/cm^2
= 101.3 kPa + 0.00354 kPa
= 101.30354 kPa
Pressure in B = Atmospheric pressure - Pressure difference
= 101.3 kPa - 0.0354 N/cm^2
= 101.3 kPa - 0.00354 kPa
= 101.29646 kPa
Therefore, the gauge pressure in chamber A is 101.30354 kPa and the gauge pressure in chamber B is 101.29646 kPa.
FILL IN THE BLANK. you can reduce your vehicle's blind spot by____
Answers
Answer:
installing large side mirrors
Explanation:
You can reduce your vehicle's blind spot by installing large side mirrors.
If an oncoming driver crosses into your path of travel, the space that is usually available for you to move your vehicle is.
Answers
Answer:
If an oncoming driver crosses into your path of travel, the space that is usually available for you to move your vehicle is to the right of your vehicle.
Explanation:
On many roads, there are areas on the sides of the road called the shoulder. The shoulder can be used for pulling over and stopping your vehicle due to emergencies.
If a driver crosses into your lane coming straight for you, the best thing to do is to pull over to the shoulder as fast as possible so to not turn left and hit incoming traffic.
hi guys can u help me?
Answers
Answer:
3. have known
4. wrote
5. not sure
6.have changed, has only
7. answered
8. have missed
9.has never seen
10.never saw
11.became,have changed
12. have changed, have grown
13.was,found
14. was never
am not sure but hope it helps
When my animal is to old to physically carry her baby what process can I use to still produce her young from her
Answers
9.7K viewsView upvotes
31
4
Related Questions (More Answers Below)
1. Declare a variable named num with an
initial value of 0. Create a while loop that
will print "Keep going" as long as the value
of num is less than 5. Use window.alert()
for displaying the output.
2. Create a function named showProd that
returns the product of n1 and n2.
3. Using the new keyword, create an array
named info with three (3) values: your first
name, your nickname, and your last name.
Answers
The code to
Declare a variable and increment with a while loop until the variable is not less than 5Create a function that returns the product of two numbersUses the new keyword to create an arraywere written in JavaScript and are found in the attached images
Declaring a variableThe first code declares a variable called num and gives it an initial value of 0. It then enters a while loop that lauches a message box (using window.alert) to print the message "Keep going" as long as num remains less than 5.
If nothing is done within the loop to increment num towards the value 5, the loop will go on endlessly notifying the user to "Keep going".
So, an increment of 1 was added to the loop body to increment the variable num. This makes sure the loop terminates.
Creating a function that returns the product of two numbersHere, a function was created that receives two arguments (n1 and n2), then returns the product (n1 * n2)
Declaring an ArrayThis last code segment creates an array using the new keyword. The new keyword is generally used in constructing objects.
In this case the object constructed is an array having three strings;
my first namemy nickname, andmy last nameSee another solved JavaScript problem here https://brainly.com/question/23610566
3. For the following processes transfer function, (-s+1) Gp(s) = (s + 1)(s +2) and the closed-loop system characteristic polynomial 1+ G.G. = 0, if we want to use a proportional controller, answer the following questions: (a) What is the range of K, that provides stable closed-loop responses? (b) From this exercise, explain the rationale behind, for example, the use of the 1st order Padé approximation, and the general effect of time delay in a given system?
Answers
The given transfer function is Gp(s) = (-s+1)/((s+1)(s+2)). To analyze the stability of the closed-loop system with a proportional controller, we first need to find the closed-loop transfer function. If we use a proportional controller with gain K, then Gc(s) = K. The closed-loop transfer function is given by Gcl(s) = Gc(s) * Gp(s) / (1 + Gc(s) * Gp(s)).
(a) To find the range of K that provides stable closed-loop responses, we can look at the characteristic equation: 1 + K * Gp(s) = 0. Substituting Gp(s), we have 1 + K(-s+1)/((s+1)(s+2)) = 0. The roots of the characteristic equation (poles of the closed-loop system) determine the stability. For stability, all poles must have negative real parts. By applying the Routh-Hurwitz criterion, we can determine the range of K that results in a stable system. In this case, the range of K for stability is found to be 0 < K < 2.
(b) The use of the 1st order Padé approximation and the general effect of time delay in a given system are not directly related to this exercise. However, the 1st order Padé approximation is a technique to approximate time delays in a transfer function, allowing for analysis and controller design. Time delays can introduce phase shifts that may degrade the system's performance or lead to instability. The approximation enables the study of the impact of time delays on the system and facilitates the design of appropriate controllers to compensate for these effects.
Learn more about closed-loop here-
https://brainly.com/question/11995211
#SPJ11
Makine yüzeysel gemi ünvan değişikliği teknolojisi
Answers
I inferred you meant emerging technologies we see today.
Explanation:
1. 3D Printing
A three dimensional printing allows a digital model to be printed (constructed) into a physical object.
A box, an industrial design and many more could be printed within minutes.
2. AI voice recognition devices
Another trend in the tech world is the rise in artificial intelligence been used in voice recognition devices that not only recognize one's voice but also take commands from the user.
This technology allows one to listen to the internet, such as listening to music online.
The tech world is ever changing with new technology beyond one's consumption on the increase daily.