A sample of an unknown compound is vaporized at 160 c . The gas produced has a volume of 2330 ml at a pressure of 1.00 atm ,and it weighs 2.10 g
Round answer to 3 significants digits

smoke

Explanation:

carbon dioxide is introduced into the atmosphere by burning of fossil fuels and forests

Answer:

A. Solid

Explanation:

We must look for the pressure of 0.25atm on the vertical axis, and the temperature of 0°C on the horizontal axis, like we can see in the following drawing:

Finally, the phase of water is solid.

The acid ionization constant for the acid is 1.40 x 10^-10.

The acid ionization constant (Ka) can be calculated using the equation:

Ka = [H+][A-] / [HA]

where [H+] and [A-] are the concentrations of the hydrogen ion and the conjugate base, respectively, and [HA] is the concentration of the undissociated acid.

Given that the percent dissociation is 0.57%, the concentration of the dissociated species can be calculated as follows:

[A-] = 0.57% * 8.0 x 10^-2 M = 4.56 x 10^-5 M

[H+] = [A-]

Since the dissociation is very small, we can assume that the concentration of the undissociated acid is equal to the initial concentration of the solution:

[HA] = 8.0 x 10^-2 M

So, the value of Ka can be calculated as:

Ka = [H+][A-] / [HA] = (4.56 x 10^-5 M)^2 / (8.0 x 10^-2 M) = 1.40 x 10^-10.

Therefore, the acid ionization constant for the acid is 1.40 x 10^-10.

Learn more about Acid Ionization Constant (Ka) here: https://brainly.com/question/4110687

#SPJ4

Answer:

Carbon dioxide is composed of one carbon atom covalently bonded to two oxygen atoms. It is a gas (at standard temperature and pressure) that is exhaled by animals and utilized by plants during photosynthesis. Carbon dioxide, CO2, is a chemical compound composed of two oxygen atoms and one carbon atom

Explanation:

Answer:

Carbon dioxide is composed of one carbon atom covalently bonded to two oxygen atoms. It is a gas (at standard temperature and pressure) that is exhaled by animals and utilized by plants during photosynthesis. Carbon dioxide, CO2, is a chemical compound composed of two oxygen atoms and one carbon atom.

Explanation:

hope this help

pick me as the brainliest

If there are any actual values of x for which f(x) = zero then the curve isn't always absolutely above or beneath the axis.

Check the values of y. All values positive -> curve is above y-axis. All values negative -> curve is beneath y-axis. There also are different cases. The curve might (for example) intersect the x-axis.

Adding to the output of a feature actions the graph up. Subtracting from the output of a feature actions the graph down. Here are the graphs of y = f (x), y = f (x) + 2, and y = f (x) - 2.

If the slope of f(x) is negative, then the graph of f'(x) might be beneath the x-axis. If the slope of f(x) is positive, then the graph of f'(x) might be above the x-axis. All relative extrema of f(x) turns into x-intercepts of f'(x).

Learn more about graph here https://brainly.com/question/19040584

#SPJ1

The balanced chemical equation for the reaction between strontium and oxygen can be written as follows: 2 Sr (s) + \(O_2\)(g) → 2 SrO (s).

In this equation, solid strontium (Sr) reacts with gaseous oxygen (\(O_2\)) to produce solid strontium oxide (SrO).

To determine the mass of product expected to form in this reaction, we need to consider the molar ratio between strontium and strontium oxide. From the balanced equation, we can see that 2 moles of strontium react to produce 2 moles of strontium oxide.

The molar mass of strontium (Sr) is 87.62 g/mol, and the molar mass of strontium oxide (SrO) is 119.62 g/mol. Since the molar ratio is 1:1 between strontium and strontium oxide, the mass of strontium oxide formed will be equal to the mass of strontium used.

In this case, the student added 4.93 g of strontium to the crucible. Therefore, the expected mass of strontium oxide formed will also be 4.93 g.

It's important to note that this calculation assumes that the reaction proceeds to completion, meaning that all of the strontium reacts with oxygen. In actual laboratory conditions, the yield of the reaction may be less than 100% due to factors such as incomplete reaction, side reactions, or product loss.

For more such questsion on balanced chemical equation visit:

https://brainly.com/question/11904811

#SPJ8

At equilibrium, the number of moles of \(Cl_2\) (g) will be 0.2025 mol.

1: Write the balanced chemical equation:

\(C_O\)(g) + \(Cl_2\)(g) ⟶ \(C_OCl_2\)(g)

2: Set up an ICE table to track the changes in moles of the substances involved in the reaction.

Initial:

\(C_O\)(g) = 0.3500 mol

\(Cl_2\)(g) = 0.05500 mol

\(C_OCl_2\)(g) = 0 mol

Change:

\(C_O\)(g) = -x

\(Cl_2\)(g) = -x

\(C_OCl_2\)(g) = +x

Equilibrium:

\(C_O\)(g) = 0.3500 - x mol

\(Cl_2\)(g) = 0.05500 - x mol

\(C_OCl_2\)(g) = x mol

3: Write the expression for the equilibrium constant (Kc) using the concentrations of the species involved:

Kc = [\(C_OCl_2\)(g)] / [\(C_O\)(g)] * [\(Cl_2\)(g)]

4: Substitute the given equilibrium constant (Kc) value into the expression:

1.2 x \(10^3\) = x / (0.3500 - x) * (0.05500 - x)

5: Solve the equation for x. Rearrange the equation to obtain a quadratic equation:

1.2 x \(10^3\) * (0.3500 - x) * (0.05500 - x) = x

6: Simplify and solve the quadratic equation. This can be done by multiplying out the terms, rearranging the equation to standard quadratic form, and then using the quadratic formula.

7: After solving the quadratic equation, you will find two possible values for x. However, since the number of moles cannot be negative, we discard the negative solution.

8: The positive value of x represents the number of moles of \(Cl_2\)(g) at equilibrium. Substitute the value of x into the expression for \(Cl_2\)(g):

\(Cl_2\)(g) = 0.05500 - x

9: Calculate the value of \(Cl_2\)(g) at equilibrium:

\(Cl_2\)(g) = 0.05500 - x

\(Cl_2\)(g) = 0.05500 - (positive value of x)

10: Calculate the final value of \(Cl_2\) (g) at equilibrium to get the answer.

Therefore, at equilibrium, the number of moles of \(Cl_2\) (g) will be 0.2025 mol.

For more such questions on equilibrium, click on:

https://brainly.com/question/517289

#SPJ8

Answer:

Polar molecules occur when two atoms do not share electrons equally in a covalent bond. ... If the electronegativity difference between the atoms is greater than 2.0, the bond is ionic. Ionic compounds are extremely polar molecules.

Explanation:

Answer:

A

Explanation:

If Hydrogen is H₂  There will be two silver

and is Carbon is C There will only be one gray

and if Oxygen is O₃ There will be three red

The measure of the length of events and the duration of intervals between events is time.

The duration of events or the gaps between them can be measured, compared, or even ordered using time. The lengthy period of time that the Earth's geologic history takes up is known as geologic time. Starting at the beginning of the Archean Eon  formal geologic time runs until the present. Geology is defined as the "Science of the Earth."

Geology is the fundamental Earth science that examines how the earth created, its structure and composition, and the various forces acting on it. It is sometimes known as geoscience or earth science.

Learn more about time  at;

https://brainly.com/question/479532

#SPJ1

Answer:

a) the final temperature of the air is 500° R

b) the amount of specific entropy produced is 0.0758 Btu/lb-°R  

Explanation:

Given the data in the question;

Air at 500° R = \(T_i\)

Using first law of thermodynamic;

δQ = dU + W

now, since the vessel is insulated, the transfer is zero, work done also is zero since there is also no external work done.

δQ = dU + W

0 = dU + 0

dU = 0

\(u_f\) - \(u_i\) = 0

\(u_f\) = \(u_i\)

hence, change in internal energy is 0

Now, since the ideal internal energy is a function of temperature, the temperature will also remain the same;

\(T_f = T_i\)

F = 500° R

Therefore, the final temperature of the air is 500° R

b)

given that; initial volume is one-third of the total volume

V₁ = \(\frac{1}{3}\)V₂

3V₁ = V₂

3 = V₂/V₁

Now, we take the value of gas constant R from air property table;  gas constant R = 0.069 Btu/lb-R  

so we calculate the entropy change;

Δs = \(c_v\)In( \(\frac{T_2}{T_1}\) ) + R.In( \(\frac{V_2}{V_1}\) )

we substitute

Δs = \(c_v\)In( \(\frac{500}{500}\) ) + 0.069 × In( 3 )

Δs = 0 + [0.069 × In( 3 )]

Δs = 0 + [0.069 × 1.0986]

Δs = 0.0758 Btu/lb-°R  

Therefore, the amount of specific entropy produced is 0.0758 Btu/lb-°R  

Insulated vessels separate the environment of the outer and the inner system. The final temperature is 500 degrees R and 0.0758 Btu/lb- degree R is the entropy.

The temperature is the measure of the hot or the coldness of the system.  The first law of the thermodynamics is used to measure the final temperature of the system:

\(\rm \Delta Q = \rm \Delta U + W\)

The work done will be zero as the system is insulated and no external work is being done.

\(\begin{aligned} \rm 0 &= \rm \Delta U + 0\\\\\rm U_{f} - U_{i} &= 0\\\\\rm U_{f} &= \rm U_{i} \end{aligned}\)

Hence, the change in the internal energy is zero. Thus, the final temperature will remain the same,

\(\rm T_{f} = \rm T_{i} = 500 ^{\circ} \rm R\)

Now, as we know, the initial volume is one-third of the total volume then,

\(\begin{aligned} \rm V_{1} &= \rm \dfrac{1}{3} V_{2}\\\\\rm 3V_{1}&= \rm V_{2}\\\\3 &= \rm \dfrac{V_{1}}{V_{2}}\end{aligned}\)

The change in entropy is calculated as:

\(\begin{aligned} \rm \Delta S &= \rm C_{v} ln ( \dfrac{T_{2}}{T_{1}}) + R \times ln ( \dfrac{V_{2}}{V_{1}}) \\\\&= 0 + [0.069 \times \rm ln( 3 )]\\\\& = 0.0758 \;\rm Btu/lb-^{\circ}R \end{aligned}\)

Therefore, the entropy produced is 0.0758 Btu/lb- degree R.

Learn more about entropy here:

https://brainly.com/question/19538748

The products would be formed by these reactants. Because Mg is a more powerful reducing agent than  H₂, it can reduce H⁺ ions to form  H₂ gas.

Because it oxidizes magnesium to magnesium cations while being reduced, hydrochloric acid, the compound that delivers hydrogen ions to the reaction, acts as an oxidation agent.

When a reactant loses electrons during the reaction, this is referred to as oxidation. When a reactant gains electrons during the reaction, this is referred to as reduction. This is common when metals react with acid.

A half reaction is the component of a redox reaction that is either the oxidation or reduction reaction. By taking into account the change in oxidation states of the individual substances involved in the redox reaction, a half reaction is obtained.

Oxidation half-reaction: Mg(s) → Mg²⁺(aq) + 2e⁻

Reduction half-reaction: 2H⁺(aq) + 2e⁻ → H₂(g)

The balanced equation is:

Mg(s) + 2HCl(aq) → MgCl₂(aq) + H₂(g)

To know more about the reduction half-reactions visit:

https://brainly.com/question/23332593

#SPJ1

The true statements about a car with constant velocity include the following below:

A. It maintains the same speed

B. It continues in the same direction

E. It has zero acceleration.

This is referred to as a scenario in which an object must have a constant speed in a constant direction.

We should note that any change in direction would automatically change the velocity even if the speed remains constant and the acceleration has to be zero for it to happen thereby making the above options the correct choices.

Read more about Constant velocity here https://brainly.com/question/3052539

#SPJ1

Thermochemistry is the look at of the heat strength that is related to chemical reactions and/or phase adjustments inclusive of melting and boiling.

Thermochemistry is the look at of the heating electricity which is related to chemical reactions and/or segment adjustments including melting and boiling. A reaction might also release or soak up electricity, and a segment alternate can also do the equal.

Thermochemistry deals with the changes in strength in chemical reactions. The distinction between the enthalpy of one mole of a pure compound and the total enthalpy of the factors of which it is composed is known as the heat of the formation, of the compound. some examples of exothermic reactions are any shape of combustion (consider the heat launched while you burn gas).

Learn more about thermochemistry here:-https://brainly.com/question/27823881

#SPJ9

The statement "Each member of a homologous series differs from its nearest neighbors by 14 amu" is true of members about a homologous series.

In organic chemistry, a homologous series unveils itself as a sequential assembly of compounds exhibiting an identical functional group, boasting akin chemical traits. Within this series, the constituents can either sport a branched or unbranched structure, or deviate through the molecular formula of CH2 and a molecular mass variation of 14u.

This divergence may manifest as the elongation of a carbon chain, as observed in the linear alkanes (paraffins), or as the augmentation in the count of monomers forming a homopolymer, such as amylose.

The entities belonging to a homologous series typically embrace a fixed assortment of functional groups, thereby conferring upon them resemblant chemical and physical characteristics.

Learn about homologous series here https://brainly.com/question/1569487

#SPJ1

Answer:

Element

Explanation:

Answer:

Silver oxide is a chemical compound

Explanation:

Silver oxide is the chemical compound with the formula Ag2O.

Answer:

it is the unit of Force

Explanation:

force is equal to Newton

Filtration is the process of passing a liquid containing contaminants through a filter to get a cleaner liquid.

After filtration impurities are left on the filter when the liquid goes through it, resulting in a cleaner combination. The procedure of separating one ingredient from another in a compound is used in the purification of chemical compounds or any materials. A mixed sample is turned into fresh samples, each of which contains a single ingredient.Separation procedures are then utilised to separate these compounds. These techniques alter the relative proportions of components in a combination.The type of the compounds and the impurities in them influence the purification of organic chemicals and compounds.

Purification of compounds can be done in other methods as well such as distillation, chromatography, sublimation and crystallisation.

Learn more about filtration here:

https://brainly.com/question/31504556

#SPJ1

Full question:

What can you conclude after learning about filtration of solutions of organic compounds? Name other methods of purification of compounds.

Answer:

Hello There!!

Explanation:

The atom is still 24Na.

hope this helps,have a great day!!

~Pinky~

Answer:

Where is the image ?

Explanation:

You have to post it so we can help you .

Answer:

where is the image?????

Answer:  Pb(NO3)2(aq) + 2KI(aq)  —> PbI2(s) + 2KNO3(aq)

1.57x10^22 atoms of Pb

87% yield

Explanation:

10.0 g Pb(II) nitrate = 10/333 moles = 0.03 moles

12.0 g KI = 12/166 moles = 0.072 moles (0.06 moles required)

11.4 g PbI2 = 11.4/421 moles = 0.026 moles

expected yield 0.03 moles, yield = 87%

atoms in 11.4 g = 0.026 moles = 0.026*6.02214076*10^23 atoms = 1.57*10^22

Nuclear Fission

Nuclear fission, subdivision of a heavy atomic nucleus, such as that of uranium or plutonium, into two fragments of roughly equal mass. The process is accompanied by the release of a large amount of energy. In nuclear fission the nucleus of an atom breaks up into two lighter nuclei.

Nuclear fission is a process where the nucleus of an atom is split into two or more smaller nuclei, known as fission products. The fission of heavy elements is an exothermic reaction, and huge amounts of energy are released in the process.

Answer:

Lime water Ca(OH)2 is a base

Potassium oxide K2O is a basic oxide

Copper sulphate CuSO4 is a salt

And vinegar is an acid

Explanation:

There are numerous ways to determine whether lead is present in an ore. Atomic absorption spectroscopy is a popular approach. With this method, an ore sample is dissolved in acid and then atomized in a flame or plasma.

The sample's atoms will absorb light at particular wavelengths that are peculiar to the element under investigation. The amount of light absorbed can be used to calculate how much lead is present in the sample. Inductively coupled plasma mass spectrometry and X-ray fluorescence spectroscopy are further techniques. It is crucial to remember that these procedures call for specialized tools and training, thus they ought to only be carried out in a lab by qualified experts.

To know more about spectrometry, here

brainly.com/question/31075363

#SPJ1

Dipole-dipole interactions between molecules that do not include a covalent bond to a hydrogen atom are known as hydrogen bonds. The attraction between two incredibly electronegative atoms, such N, O, or F, and a hydrogen atom that is covalently bonded to one of them causes it to occur.

Any electronegative atom, such as oxygen, chlorine, or fluorine, may make up the other atom, whereas one of the atoms is hydrogen. Between molecules or between two different molecules, hydrogen bonds can develop between the atoms.

How to determine hydrogen bonding?

Determine whether hydrogen bonds are likely by looking at the molecule's Lewis structure. The electronegative atom needs one or more unshared electron pairs and a negative partial charge, much like oxygen and nitrogen do.

To know more about Hydrogen Bonding, visit:

https://brainly.com/question/15099999

#SPJ4

The statements that accurately describe the rock cycle are:

Rocks change from one type to another in a definite order.

Rocks change slowly over time.

What is Rock Cycle?

It illustrates how the three major types of rocks—igneous, sedimentary, and metamorphic—can be transformed from one type to another over time through various geological processes such as weathering, erosion, sedimentation, and metamorphism. The rock cycle is driven by the continuous movement of the Earth's crust and the interactions between the different components of the Earth system, such as the atmosphere, hydrosphere, and biosphere.

The rock cycle is a natural process that describes how rocks transform from one type to another over time through a series of geological processes. It is a continuous process and there is no set starting or ending point. The rock cycle is driven by various factors including heat, pressure, weathering, erosion, and geological activity.

Learn more about Rock Cycle from given link

https://brainly.com/question/22142661

#SPJ1

Answer:

A C D

Explanation:

Answer:

c

Explanation:

Because they are in the wild and they move a lot because they freedom. They are easy to close but you can not position so it is c. Pls tell if I am wrong.

Considering the phase diagram, the state of matter that exists in area B is gas.

The correct option is A.

A phase diagram is a graphical representation that shows the conditions of temperature and pressure at which different phases or states of a substance exist.

The axes of a phase diagram typically represent temperature (usually on the horizontal axis) and pressure (usually on the vertical axis). The diagram is divided into regions that correspond to different phases, and the lines separating these regions represent phase boundaries.

The point where three phase boundaries meet is known as the triple point, which represents the temperature and pressure at which all three phases can coexist in equilibrium.

Learn more about phase diagrams at: https://brainly.com/question/28097253

#SPJ1

The correct answer is D) Ca(OH)₂. Ca(OH)₂ is a strong base and will give a solution with a pH greater than 7, but it is not an Arrhenius base in the strict sense as it does not produce OH- ions in the aqueous solution.

It is important to note that the Arrhenius definition of a base is limited to substances that produce hydroxide ions in an aqueous solution. Therefore, although Ca(OH)₂ will increase the pH of an aqueous solution, it is not classified as an Arrhenius base due to its lack of production of hydroxide ions.

Learn more about Arrhenius Base:

https://brainly.com/question/27902993

#SPJ4