The car is moving with the linear velocity of 44.2 m/s.
We have the diameter of car wheels as 65 cm which are spinning at an angular velocity of 136 rad/s.
We have to determine how fast is the car moving or its linear velocity.
What is Angular Velocity ?Angular velocity is defined as the rate of change of angular position of a rotating body.
\(\omega = \frac{d\theta}{dt}\)
According to question, we have -
diameter of car wheels = 65 cm
Therefore, the radius will be = 32.5 cm
Angular velocity = 136 rad/s
We know that -
v = r\(\omega\)
v = 32.5 x 136
v = 4420 cm/s
v = 44.2 m/s
Hence, the car is moving with the linear velocity of 44.2 m/s.
To solve more questions on Circular motion, visit the link below -
https://brainly.com/question/26936154
#SPJ1
Calculate the magnitude and direction of the resultant of the following forces
Answer and I will give you brainiliest
Answer:
250N same direction
Explanation:
100+150 = 250N
same direction
A 11.1 kg block of steel is pushed at a constant speed across
a Teflon surface. What is the normal force on the block?
(Answer to one decimal place with no units.)
The normal force on the block of steel of mass 11.1Kg at constant speed is 108.8 N.
Mass of steel block = 11.1 Kg
Normal force on the block = Force exerted by the surface on the block
= mass × acceleration due to gravity
= m × g
Taking the value of g as 9.8 m/s
= 11.1 × 9.8
= 108.78 N
By converting the answer to one decimal place, round the value to
= 108.8 N
Thus, the normal force on the block of steel by the Teflon surface round to one decimal place is 108.8 N.
To know more about Normal Force:
https://brainly.com/question/13718555
#SPJ1
Advances in public health and medicine were some of the main reasons population ______ in the 18th century.
Advances in public health and medicine were some of the main reasons the population grew in the 18th century.
Public health focuses on illness prevention, whereas medicine focuses on the prevention, diagnosis, and treatment of patients. The primary instruments of the medical professional are medication, surgery, and other types of personalized intervention.
Vaccine invention and widespread usage, smallpox eradication, significant decreases in infectious disease outbreaks, and the rise and fall of various important chronic illnesses are among the contributions most noted for their influence on mortality and lifespan.
Public health evolved via trial and error and developing scientific medical knowledge, which was sometimes contentious and was sometimes prompted by war and natural calamities. The necessity for organized health protection arose as communal life evolved, particularly with urbanization and social changes.
For more questions on Advances in public health and medicine
https://brainly.com/question/2237100
#SPJ4
Which theory states that the principle cause of forgetting is passage of time? A. motivated forgetting B. retrieval failure C. decay theory D. ineffective encoding
When a skater pulls her arms in, it
reduces her moment of inertia from
2.12 kg m² to 0.699 kg-m². If she was
initially spinning 3.25 rad/s, what is
her final angular velocity?
The skater's final angular velocity is approximately 9.86 rad/s.
The skater's final angular velocity can be calculated using the principle of conservation of angular momentum. The equation for angular momentum is given by:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
Initially, the skater has an angular momentum of:
L_initial = I_initial * ω_initial
Substituting the given values:
L_initial = 2.12 kg m² * 3.25 rad/s
The skater's final angular momentum remains the same, as angular momentum is conserved:
L_final = L_initial
The final moment of inertia is given as 0.699 kg m². Therefore, the final angular velocity can be calculated as:
L_final = I_final * ω_final
0.699 kg m² * ω_final = 2.12 kg m² * 3.25 rad/s
Solving for ω_final:
ω_final = (2.12 kg m² * 3.25 rad/s) / 0.699 kg m²
Hence, the skater's final angular velocity is approximately 9.86 rad/s.
For more such questions on angular velocity, click on:
https://brainly.com/question/29566139
#SPJ8
Kiran drove from Tortula to Cactus, a distance of 250 mi. She increased her speed by 10 mi/h for the 360-mi trip from Cactus to Dry Junction. If the total trip took 11 h, what was her speed from Tortula to Cactus
Kiran's average speed from Tortula to Cactus was 58.78 miles per hour.
Let's use "x" miles per hour as Kiran's speed from Tortula to Cactus.
The time it takes Kiran to traverse the 250 miles between Tortula and Cactus is calculated as follows: time = distance / speed time = 250 / x
We also know that she upped her speed by 10 miles per hour throughout the 360-mile distance from Cactus to Dry Junction.
For that portion of the journey, let's designate her new speed "x+10" mi/h.
Her trip time is calculated as follows: time = distance / speed
time = 360 / (x+10)
Given that the entire journey lasted 11 hours, we can construct the following equation:
Time from Dry Junction to Cactus plus the time from Cactus to Tortula equals 11
250/x + 360/(x+10) = 11
We can now determine x:
250(x+10) + 360x = 11x(x+10)
0 - 400 - 2500 = 250x + 2500 + 360x = 11x2 + 110x
The quadratic equation is as follows: x = [400 sqrt(4002 - 4(11)(-2500))]
/ (2(11)) x = [400 ± sqrt(176000)]
/ 22
Speed cannot be negative, so we can disregard the negative result. Therefore, x = [400 + sqrt(176000)]
/ 22\sx ≈ 58.78
Kiran travelled between Tortula and Cactus at a speed of almost 58.78 miles per hour.
For such more questions on Speed
https://brainly.com/question/6504879
#SPJ4
34. JAnswer this: Pure (24 carat) gold has a density of 19 g/mL. If you bought"gold" ring and found it had a volume of 0.3 ml and that it weighed 5.7 grams, is it pure gold? Show your work to support your answer.
Explanation:
Density = mass / volume
ρ = 5.7 g / 0.3 mL
ρ = 19 g/mL
Yes, it's pure gold.
Yes, it's pure gold.
How do you calculate gold density?The mass of an object divided by its volume is the formula for determining density. This is expressed mathematically as d = m/v, where d denotes density, m denotes mass, and v denotes object volume. The common measurements are kg/m³.What is the formula of volume?The basic formula for volume is length, breadth, and height, as opposed to length, width, and height for the area of a rectangular shape.What is the volume of pure gold?Gold has a specific gravity of 19.3. In light of this, 19.3 grams take up 1 cubic centimeter. 31.1 grams make up a Troy ounce. As a result, we need 31.1/19.3 = 1.61 cubic centimeters to equal 1 Troy Oz.According to the question:
Density = mass / volume.
ρ = 5.7 g / 0.3 mL.
ρ = 19 g/mL.
Hence, Yes it's pure gold.
Learn more about gold density here:
https://brainly.com/question/4935901
#SPJ2
Only the first problem below please thank you so much
The initial speed of the second ball is c. 26.8 m/s
What is speed?Speed is the distance per unit time moved by an object/
How to find the initial speed of the ball?Since the ball is a projectile, to find the initial speed of the second ball, we need to find the maximum height of the first ball using
h = u²sin²Ф/2g where
u = initial velocity of ball = 32 m/s, Ф = angle of projection = 57° and g = acceleration due to gravity = 9.8 m/s²Substituting the values of the variables into the equation, we have
h = u²sin²Ф/2g
h = (32 m/s)²× (sin57°)²/(2 × 9.8 m/s²)
h = 1024 m²/s²× (0.8387)²/(19.6 m/s²)
h = 1024 m²/s²× (0.7034)/(19.6 m/s²)
h = 720.249 m²/s²/(19.6 m/s²)
h = 36.75 m
Now, since a second projectile is thrown vertically to the same maximum height, we need to find its initial speed.
Using the equation of motion v² = u² - 2gh where
u = initial speed, v = speed at maximum height = 0 m.s, g = acceleration due to gravity = 9.8 m/s² and h = maximum height = 36.75 mMaking u subject of the formula, we have
u = √(v² + 2gh)
Substituting the values of the variables into the equation, we have
u = √(v² + 2gh)
u = √[(0 m/s)² + 2 × 9.8 m/s² × 36.75 m]
u = √[0 m²/s² + 19.6 m/s² × 36.75 m]
u = √[720.3 m²/s²]
u = 26.84 m/s
u ≅ 26.8 m/s
So, the initial speed of the second ball is c. 26.8 m/s
Learn more about initial speed of ball here:
https://brainly.com/question/28964058
#SPJ1
What is located directly above the focus where the most damage can occur to structures?
Answer:
option(c) Epicenter
Explanation:
Hypocenter or the focus is the point where an earthquake or an underground explosion originates. center is the point that's directly above the focus on the face of the earth.
During earthquakes, utmost of the time it's the center that encounters topmost damage. The word center was deduced from the Latin word ‘ epicentrum ’ meaning positioned on a center.
To know more about this
https://brainly.com/question/29935717
Particles q₁ = +18.1 µC, q2 = -11.2 μC, and
93 +5.67 μC are in a line. Particles q₁ and q2 are
separated by, 0.280 m and particles q2 and q3 are
separated by 0.350 m. What is the net force on
particle q₂?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-27.7 x 10⁶ N is the net force on particle q₂..
Define a charged particle
A particle with an electric charge is said to be charged particle. It might be an ion, such as a molecule or atom having an excess or shortage of electrons in comparison to protons. It could also be an elementary particle like as an electron, proton, or another one that is thought to have the same charge (except antimatter).
F₁₂ = kq₁q₂/r²
k is Coulomb's constant
r is the distance between q₁ and q₂
q represent charges
F₁₂ = (9x 10⁹ x 18.1 x 10⁻³ x 11.2 x 10⁻³)/(0.28)²
F₁₂ = -23* 10⁶ N
F₂₃ = kq₂q₃/r²
F₂₃ = -(9 x 10⁹ x 11.3 x 10⁻³ x 5.67 x 10⁻³)/(0.35)²
F₂₃ = 4.7 x 10⁶ N
F(net) = F₁₂ + F₂₃
= -23* 10⁶ N + -4.7 x 10⁶ N
= -27.7 x 10⁶ N
To learn more about electric charge use link below:
https://brainly.com/question/2373424
#SPJ1
After the big bang started the universe 13.78 billion years ago, the universe began to rapidly expand. This rapid expansion caused the universe to cool
down into a network of gaseous clouds composed mainly of which element?
O Oxygen
Hydrogen
O Neon
O Carbon
Answer:
hydrogen
Explanation:
hope it helps bye.
In a class experiment to determine information about free-fall acceleration, a watermelon and a pumpkin are each set to fall from the back of the stands at your football stadium.
a. If the watermelon and the pumpkin are both dropped at the same time, which one will hit the ground first?
b. If the watermelon is thrown downward with an initial speed of 10 m/s and the pumpkin is dropped, which one will hit the ground first? Show calculation to support your answer.
c. If it takes the watermelon 1 second to reach the ground when it is thrown downward at 10 m/s, how tall are the stands?
d. How long does it take the pumpkin to reach the ground if it is dropped from this height you calculated in part c?
Answer:
a) They both hit the ground at the same time
b) Watermelon will hit first, since its speed is faster than the pumpkin speed
c) h = 29,6 m
d)t = 3,02 sec
Explanation:
Equations for fall free movement are:
vf = v₀ + g*t when v₀ = 0 (dropped case) vf = g*t
h = v₀*t + 1/2*g*t²
a) For both ( watermelon and pumpkin) the equation of speed is the same:
vf = g*t² Both will have the same speed second through second
They both hit the ground at the same time
b) Now is watermelon is thrown with v₀ = 10 m/s
Watermelon will hit first since its speed is faster than the pumpkin speed
vf(watermelon) = 10 + g*t
vf₂ (pumpkin) = g*t
c) h = v₀*t + (1/2)*g*t²
h = (10)*1 + (1/2)*9,8*1
h = 10 + 19,6
h = 29,6 m
d) h = g*t
t = 29,6/9,8
t = 3,02 sec
the resistance of a heater element is 1200 ohms and draws a circuit of 0.4 amperes calculate the voltage of the circuit
Answer:
0.00033333333
Explanation:
time taken by a train of length 150 m and travelling with uniform velocity of 60km/hr to cross completely a bridge of length 1.5km will be
Answer:
Time=0.0275h ,you can change it into sec by multiplying it by 3600
Explanation:
SEE THE IMAGE FOR SOLUTION
HOPE IT HELPS
HAVE A GREAT DAY
The wave equation says that a waves __ is equal to its wavelength times is frequency.
Answer:
speed
Explanation:
The wave equation says that a waves speed is equal to its wavelength times is frequency.
Einstein’s principle of equivalence states:
A) the gravitational constant is the same everywhere in the universe
B) it is impossible to tell the difference between gravitational force and the normal force
C) every mass exerts a gravitational force on every other mass
D) gravitational mass and inertial mass are the same
E)the laws of physics are the same in all inertial reference frames
explain the term tenscopo
Answer: Here you go, i hope this kinda helps.
Explanation:Disambiguation is just a fancy way of saying "asking clarifying questions".
Watson Assistant replies to user's questions based on a confidence score.
Sometimes the customer's question could be interpreted in two or three different ways.
For example, if you say you'd like to "book a table for 8", the assistant is able to ask a clarifying question:
Did you mean booking a table for 8PM, 8AM, or booking a table for 8 guests?
Watson Assistant will ask the question when its confidence score is divided between a few options to ensure that your customers get exactly the right service they need.
A planet moves in a circular orbit of radius 4.5x10^15 m with a period of 4
days. What is its velocity?
Answer:
2.6x10^{10}
Explanation:
please do follow me
10. A frequency of the first harmonic is 587 Hz (pitch of D5) is sounded out by a vibrating guitar
string. The speed of the wave is 600 m/sec. Find the length of the string.
Find the angular velocity in degrees per second of the frequency is;
A) 60Hz
B) 220Hz
C) 600Hz
D) 1.53kHz
Round all answers to the nearest degree per second.
The angular velocity to nearest degree per second, gives:
A) 21584°/s
B) 79217°/s
C) 215848°/s
D) 551180°/s
How to convert the frequency to degrees per secondThe formula to convert frequency (f) in Hertz (Hz) to angular velocity (ω) in radians per second is:
ω = 2πf
To convert the result to degrees per second, we can multiply by 180/π, which is the conversion factor between radians and degrees.
Using this formula, we get:
A) ω = 2π × 60 = 376.99 rad/s ≈ 21584°/s
B) ω = 2π × 220 = 1382.94 rad/s ≈ 79217°/s
C) ω = 2π × 600 = 3769.91 rad/s ≈ 215848°/s
D) ω = 2π × 1.53 × 10^3 = 9621.89 rad/s ≈ 551180°/s
Rounding these results to the nearest degree per second, we get:
A) 21584°/s
B) 79217°/s
C) 215848°/s
D) 551180°/s
Learn more about angular velocity at:
https://brainly.com/question/20432894
#SPJ1
The lowest point in Death Valley is 85 m below sea level. The summit of nearby Mt. Whitney has an elevation of 4420 m above sea level.
The difference in the elevation is 4505 meters.
What is the difference in the elevation?A geographic location's elevation is its height above or below a fixed reference point, most commonly a reference geoid, which is a mathematical model of the Earth's sea level as an equipotential gravitational surface.
Elevations are classified into four types: front elevation, side elevation, rear elevation, and split elevation.
In this case, the lowest point in Death Valley is 85 m below sea level. The summit of nearby Mt. Whitney has an elevation of 4420 m above sea level. The difference will be:
= Highest point - Lowest point
= 4420 - (-85)
= 4420 + 85
= 4505 m
Learn more about elevation on:
https://brainly.com/question/88158
#SPJ1
Complete question
The lowest point in Death Valley is 85 m below sea level. The summit of nearby Mt. Whitney has an elevation of 4420 m above sea level. What is the difference in the elevation?
A 85.0-kilogram astronaut weighs 834 newtons at the surface of Earth. What is the mass of the astronaut at the surface of the Moon, where theacceleration due to gravity is 1.62 meters per second squared?O 12.7 kgO 85.0 kgO 138 N0 638 N
ANSWER:
85.0 kg
STEP-BY-STEP EXPLANATION:
We have that the more mass the more it weighs. The weight of a body is not the same on Earth as it is on the Moon because the Moon is smaller than the Earth and has less mass and the force with which it attracts bodies is less (that is, the acceleration of gravity is different). But despite this the mass of the body does not vary even if we are in different places such as the Earth or the Moon.
Therefore, the mass would be the same, 85.0 kg
One factor that could account for a drop in the water table is:
A. more wind.
B. less porous soil.
C. more clouds.
D. less rain and snow.
Answer:
D. Less rain and snow.
Explanation:
A factor that can be a account for a drop in the water table is, less rain and snow. to topography, water tables is influenced by lot of factors, including the geology, weather, ground cover.
I will mark you brainlist!!
How is primary succession different from secondary succession? Give an example of an event that may lead to primary succession.
Answer:
Primary Succession is defined as the type of ecological succession, which occurs or start from the barren, uninhabited and unoccupied areas, such as the newly formed pond, rock, dunes, etc., while such kind of succession, which occurs in the area where there was the existence of life previously but got abandoned due to natural disturbances like deforestation, natural calamities (flood, earthquake, tsunami), the field with no vegetation is known as Secondary Succession
Explanation:
Some examples of primary succession include the formation of a new ecosystem after a volcano, glacier outbursts, or a nuclear explosion. Some examples of secondary succession include succession after fire, harvesting, logging, or abandonment of land or the renewal after a disease outbreak
i hope this answer helps :)
Cell membranes (the walled enclosure around a cell) are typically about d = 7.1 nm thick. They are partially permeable to allow charged material to pass in and out, as needed. Equal but opposite charge densities build up on the inside and outside faces of such a membrane, and these charges prevent additional charges from passing through the cell wall. We can model a cell membrane as a parallel-plate capacitor, with the membrane itself containing proteins embedded in an organic material to give the membrane a dielectric constant of about 12.
Required:
a. What is the capacitance per square centimeter of such a cell wall?
b. In its normal resting state, a cell has a potential difference of 85mV across its membrane. What is the electric field inside this membrane?
Answer:
A. 1.24micro farad
B. 1.20x10^7V/m
Explanation:
See attached file
1.24micro farad is the capacitance per square centimeter of such a cell wall
In its normal resting state, a cell has a potential difference of 85mV across its membrane. the electric field inside this membrane is 1.20x10^7V/m.
what are the function of cell membrane ?The cell membrane is a selectively semi-permeable membrane surrounds the cytoplasm, the primary function of the membrane is to provide protection the integrity of the interior of the cell.
The cell membrane is called as multifaceted membrane which envelopes a cell's cytoplasm and help the cell to maintain the its shape.
Cell membrane is composed of Proteins and lipids where the mix or ratio of proteins and lipids can vary depending on the function of a specific cell.
Phospholipids are the crucial components of cell membranes which are arranged to form a lipid bilayer and certain substances can diffuse through the membrane to the cell's interior.
some cell organelles are surrounded by cell membranes, The nucleus and mitochondria have its own membrane.
For more details regarding cell membrane, visit
brainly.com/question/18523433
#SPJ2
Assume you are driving a car at a constant speed of 78.0 km/h. Suddenly you see a deer standing on the highway and you must put on the brakes. Your reaction time (time elapsed between the moment you see the deer and your foot hitting the brakes) is 0.130 sec. The brakes provide an acceleration with a magnitude of 4.6 m/s2, and a direction opposite the initial velocity.
A) Find the distance (in m) the car travels (at 78.0 km/h) during your reaction time.
B) Calculate the total distance (in m) traveled by the car before stopping.
(a) The distance the car travels during your reaction time is 2.83 m.
(b) The total distance traveled by the car before stopping is 97.8 m
What is the distance travelled?To find the distance traveled during the reaction time, we need to find the velocity after the reaction time and then use it to find the distance traveled.
78 km/h = 78,000 m/h ÷ 3600 s/h = 21.67 m/s
After the reaction time, the velocity is equal to the initial velocity plus the acceleration during the reaction time:
v = v₀ + at
v = 21.67 m/s - (4.6 m/s²)(0.130 s)
v = 21.67 m/s - 0.599 m/s
Finally, the distance traveled during the reaction time is given by:
d = v₀t + ¹/₂at²
d = 21.67 x 0.130 s + ¹/₂(-4.6) x (0.130)²
d = 2.83 m
B) To find the total distance traveled before stopping, we need to find the time it takes for the velocity to reach 0.
The velocity after the reaction time is equal to 21.67 m/s - 0.599 m/s = 21.07 m/s.
Using the equation v = v₀ + at, we can find the time it takes to come to a stop:
t = -v₀ / a
t = -21.07 / -4.6
t = 4.58 s
The total distance traveled can be found using the equation:
d = v₀t + ¹/₂at²
d = 21.67 x 4.58 + ¹/₂(-4.6) x 4.58
d = 97.8 m
Learn more about total distance here: https://brainly.com/question/24094847
#SPJ1
Convert 80km/h to m/s
Answer:
22.22 m/s
Explanation:
Your goal is to cancel the terms so that you are only left with m and s:
\(\frac{80km}{h} *\frac{h}{60min}*\frac{min}{s}*\frac{1000m}{km}\\ \\\)
= 22.2222...m/s
the lanthanides and actinides belong to the
Answer:
Inner Transition Metals
Explanation:
The lanthanides and actinides belong to the inner transition metals.
Answer:
inner transition elements
Explanation:
In the periodic table to which the lanthanides and actinides metals belong to is inner transition elements because these elements are present in between transition elements.
Blocks 1 and 2 are connected by a light string that passes over a pulley with negligible mass and friction, as shown in the figure. Block 1 is on a table covered with two different materials, A and B. The two-block system is released from rest, and the speed of block 1 begins to increase. When block 1 reaches material B, its speed increases at a greater rate. Which of the following correctly compares the coefficient of kinetic friction m between block 1 and the two materials and describes the change in the magnitude of the net force on block 2 as block 1 slides from material A to material B?
The coefficient of kinetic friction on material B is greater than material A, causing an increase in net force on block 2.
The coefficient of kinetic friction between block 1 and material B is greater than that between block 1 and material A, which causes an increase in the net force acting on block 2 as block 1 slides from material A to material B.
This is because the increased friction on material B results in a greater opposing force to the motion of block 1, which in turn causes a greater tension force on the string and therefore a greater net force on block 2.
This effect is due to the properties of the different materials and the interaction between the materials and the block, which ultimately determine the amount of friction present and the resulting force acting on the system.
For more such questions on kinetic, click on:
https://brainly.com/question/8101588
#SPJ11
can anyone heelp me plz plz
Answer:
the ans is D.... good luck