Which part of our solar system contains the most mass?.

Answer:

Hypothesis is simply a theory given on something which may be correct or not.

1.96 minutes long should it take to bring 0. 7 l of water from room temperature (20°c) to 80°c.

To find the answer, we have to know about the heat energy.

                    \(Power,P=1500W\\Volumw, V=0.7L\\T_1=20^0C \\T_2=80^0C\)

                   \(m=\rho V=1kg/L*0.7L=0.7kg\)

                    \(Q=mc\Delta T=0.7*4182(80-20)\\Q=1.76*10^5J\)

where, c equals to 4182J/kg°C.

                     \(t=\frac{E}{P} =\frac{1.76*10^5}{1500} =117.3s=1.96minutes.\)

Thus, we can conclude that, 1.96 minutes long should it take to bring 0. 7 l of water from room temperature (20°c) to 80°c.

Learn more about heat energy here:

https://brainly.com/question/27381457

#SPJ4

Statement A and C are related to Doppler Effect while Statement B and D are not, which explains why it detects only radial velocity.

Statement A:

This statement is correct. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source. The amount of shift in wavelength or frequency is determined by the relative velocity of the source and the observer along the line of sight. If the source is moving perpendicular to the line of sight, then there will be no change in the wavelength or frequency of the wave.

Statement B:

This statement is not directly related to the Doppler effect. The temperature of an object is related to the average kinetic energy of its particles, which can affect the amount and frequency of radiation emitted by the object. However, this does not affect the Doppler effect, which is solely related to the relative motion of the wave source and observer.

Statement C:

This statement is also correct. If the observer is moving away from the wave source, the effective wavelength of the wave will be longer, leading to a decrease in frequency. This is because the peaks of successive waves will be further apart due to the motion of the source away from the observer.

Statement D: about Coulomb force

This statement is not related to the Doppler effect. It describes the relationship between the distance between oppositely charged particles and the strength of the attractive force between them, which is relevant to topics such as atomic and molecular structure.

Learn more about Doppler Effect here:

https://brainly.com/question/1330077

#SPJ4

The acceleration of the projectile is 600 m/s²

Acceleration is simply defined as the rate of change of velocity with time. Mathematically, it can be expressed as:

a = (v – u) / t

Where

•a is the acceleration

•v is the final velocity

•u is the initial velocity

•t is the time

From the question given above, the following data were obtained:

•Time (t) = 0.5 s

•Initial velocity (u) = 0 m/s

•Final velocity (v) = 300 m/s

•Acceleration (a) =?

a = (v – u) / t

a = (300 – 0) / 0.5

a = 300 / 0.5

a = 600 m/s²

Learn more about acceleration:

https://brainly.com/question/390784

According to the given information the correct answer is Based on the equation w=mg, it is apparent that weight is equivalent to a (an) A. force

Force refers to a push or pull that can cause a change in the motion of an object. It is a vector quantity, which means it has both magnitude and direction. Force is typically measured in units of newtons (N).

There are different types of forces, including:

Contact forces - These are forces that arise from physical contact between two objects. Examples include friction, tension, and normal force.

Non-contact forces - These are forces that can act over a distance without physical contact between objects. Examples include gravity, electric and magnetic forces.

Applied forces - These are forces that are exerted by an external agent, such as a person pushing a cart or a machine pulling a rope.

Reactive forces - These are forces that are exerted in response to an applied force, such as the force that a floor exerts on a person standing on it.

Forces are an important concept in physics, as they help explain how objects move and interact with one another.

To know more about force visit:

https://brainly.com/question/29044739

#SPJ11

The initial speed of the car with a length of the skid mark of about 64 m long and kinetic friction of 0.70 is 29.63 m/s.

A force that acts between moving surfaces is referred to as kinetic or sliding friction. It is the frictional force that prevents relative motion between surfaces in contact. The formula to calculate this kind of friction is, \(f _k =\mu_kN\) where uk is the coefficient of friction and N is the normal force.

Given the length of the skid mark (Δd) is 64 m and the coefficient of kinetic friction is 0.70. The final velocity vf is 0 because the car stops.

Let us assume the initial velocity vi, mass m,  and deceleration a. Then, the normal force acting on the car is N = mg. The kinetic friction will be,

\(f _k =\mu_kN\\f_k=\mu_kmg\)

Let's assume the only force acting on the system is kinetic friction, then friction force=ma. Solve this equation with the above equation,

\(\begin{aligned}ma&=\mu_kmg\\a&=\mu_kg\end{aligned}\)

Then, the initial speed is calculated as follows

\(\begin{aligned}v_f^2&=v_i^2-2a\Delta d\\0&=v_i^2-2\mu_kg\Delta d\\v_i^2&=\mathrm{2\times0.70\times9.80\;m/s^2\times64\;m}\\v_i^2&=\mathrm{878.08\;m^2/s^2}\\v_i&=\mathrm{29.63\;m/s}\end{aligned}\)

The answer is 29.63 m/s.

The complete question is -

Police investigators, examining the scene of an accident involving two cars, measured 64 m long skid marks on one of the cars, which nearly came to a stop before colliding. The coefficient of kinetic friction between rubber and the pavement is about 0.70. Estimate the initial speed of that car, assuming a level road.

To know more about kinetic friction:

https://brainly.com/question/19180015

#SPJ4

Answer:

The answer is b and c

Explanation:

When air moves from an area of high pressure to an area of low pressure, it follows a curved path due to the Earth's rotation and the Coriolis effect. The Coriolis effect causes air to be deflected to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This means that the path of air moving from high to low pressure will be curved as it follows the direction of the prevailing winds. However, the exact path that air takes can be influenced by other factors such as local topography, temperature gradients, and the presence of weather systems.

The Coriolis effect is the force on the earth's rotation that deflects the direction of ocean currents. The current deflection to the right occurs at the north pole while the current deflection to the left occurs at the south pole.

Learn More About Coriolis Effect at https://brainly.com/question/1757337

#SPJ11

Explanation:

A moving object always has kinetic energy store

(a) A = B × r is a vector potential for B, where r = {x, y, 0}.

(b) The flux through a surface S can be calculated as Φ = ∫B·dA, where B is the magnetic field and dA is an infinitesimal area vector perpendicular to the surface.

(a) To verify that A = B × r is a vector potential for B, we need to show that ∇ × A = B.

Using the cross product property, we have ∇ × A = ∇ × (B × r). Applying the vector identity (A × B) × C = B(A · C) - C(A · B), we get ∇ × (B × r) = B(∇ · r) - r(∇ · B).

Since ∇ · r = 0 (as r = {x, y, 0}), and ∇ · B = 0 (as B has a constant magnitude in the z-direction), we find that ∇ × A = B, verifying A = B × r as the vector potential for B.

(b) The flux through a surface S can be calculated as Φ = ∫B·dA, where B is the magnetic field and dA is an infinitesimal area vector perpendicular to the surface.

Given that B has a constant strength b teslas in the z-direction, the flux through surface S will be Φ = ∫B·dA = ∫(0, 0, b) · (dxdy) = b∫dxdy = bA, where A is the area of the surface S.

To know more about magnitude, refer here:

https://brainly.com/question/31022175#

#SPJ4

The speed of the boat relative to the water is 9.08 m/s, when the boat takes 14 minutes to cross the river.

We can decompose the velocity of the boat into two components: one parallel to the river, and one perpendicular to it. Let's call the parallel component \(v_p_a_r\) and the perpendicular component \(v_p_e_r_p\):-

\(v_p_a_r = v_b_o_a_t cos\theta\)

\(v_p_e_r_p = v_b_o_a_t sin\theta\)

The boat will travel a distance of 102 m across the river, which will take 14 minutes or 840 seconds. Therefore, the distance traveled parallel to the river will be:

\(d_p_a_r = v_p_a_r * t = v_b_o_a_t cos\theta * 840 s\)

The distance traveled perpendicular to the river will be:

\(d_p_e_r_p = v_p_e_r_p * t = v_b_o_a_t sin\theta * 840 s\)

The boat will end up at a point directly north of its departure point on the south bank, which means that \(d_p_e_r_p = 102 m\). Therefore, we can solve for \(v_b_o_a_t\) as follows:

\(v_b_o_a_t sin\theta * 840 s = 102 m\)

\(v_b_o_a_t sin\theta = 102 m / 840 s\)

\(v_b_o_a_t sin\theta = 0.1214 m/s\)

To solve for \(v_b_o_a_t\):-

\(tan\theta = d_p_a_r / d_p_e_r_p\)

\(tan\theta = (v_p_a_r * t) / (v_p_e_r_p * t)\)

\(tan\theta = v_p_a_r / v_p_e_r_p\\tan\theta = v_b_o_a_t cos\theta / (v_b_o_a_t sin(\theta))\\\)

Reserving the value of \(d_p_e_r_p\) and solving for \(\theta\):-

\(\theta = arctan(v_p_a_r / (102 m / 840 s))\\\theta = arctan(v_b_o_a_t cos(\theta) / 0.1214 m/s)\)

\(v_p_a_r^2 + v_p_e_r_p^2 = v_b_o_a_t^2\\(v_b_o_a_t cos(\theta))^2 + (v_b_o_a_t sin(\theta))^2 = v_b_o_a_t^2\)

\(v_b_o_a_t^2 (cos^2(\theta) + sin^2(\theta)) = v_b_o_a_t^2\\v_b_o_a_t^2 = 102^2 / (cos^2(\theta) + sin^2(\theta))\\v_b_o_a_t = \sqrt{[102^2 / {cos^2(\theta) + sin^2(\theta)}]}\)

Reserving the value of \(\theta\):-

\(v_b_o_a_t = \sqrt{[102^2 / {cos^2(\theta) + sin^2(\theta)}]} \\v_b_o_a_t = 9.08 m/s\)

Therefore, the speed of the boat relative to the water is 9.08 m/s.

To know more about speed please refer: https://brainly.com/question/30265720

#SPJ4

One consequence of Newton's third law of motion is that all actions have equal and opposite reactions. (C)

In fact, that's pretty much what the law itself says in so many words.

Answer:

Its C All actions have equal and opposite reactions

Explanation:

Ive done this before

Due to the sheer short wavelength, the angle at which constructive interference in between waves occurs is unequal wavelengths.

Find out more about the Unequal wavelengths here:

brainly.com/question/14931196

The average intensity of the electromagnetic wave with a peak electric field value of 250.0 N/C is approximately 0.89 W/m².

To determine the average intensity of an electromagnetic wave with a peak electric field value of 250.0 N/C, we will follow these steps:
1. Recall the equation for the intensity of an electromagnetic wave: I = (1/2) * ε₀ * c * E², where I is the intensity, ε₀ is the permittivity of free space (8.85 x 10^(-12) C²/Nm²), c is the speed of light in a vacuum (3 x 10^8 m/s), and E is the peak electric field value (250.0 N/C in this case).
2. Plug the given values into the intensity equation: I = (1/2) * (8.85 x 10^(-12) C²/Nm²) * (3 x 10^8 m/s) * (250.0 N/C)².
3. Perform the calculation: I ≈ 0.834 W/m².
4. Compare the calculated intensity to the given options: a) 0.66 W/m², b) 0.89 W/m², c) 83 W/m², d) 120 W/m², and e) 170 W/m².
5. Based on the calculated value, the closest option is b) 0.89 W/m².

learn more about electromagnetic wave Refer: https://brainly.com/question/3101711

#SPJ11

complete question :

value of 250.0 NIC. An electromagnetic wave has an electric field with a peak value of What is the average intensity of the wave? a) 0.66 W/m?  b) 0.89 W/m2 c) 83 W/m  d) 120 W/m2 e) 170 W/m2

Answer:

maximum height: p(t) = Vo * t - 1/2 * g * t^2

p’(t) = v(t) = 0 = Vo - g*t. So, maximum height occurs when t = Vo / g

p(Vo / g) = Vo^2/g - 1/2 * g * (Vo/g)^2

Vo = 10 m / s. Let’s approximate g = 10 m / s^2

p(Vo / g) = 10^2 / 10 - 1/2 * 10 * (10/10)^2 = 10 - 5 = 5 meters (approximately)

Calculation of time:

v = u + gt

0 = 10√2 + (-10)t

-10√2 = -10t

2 = √2s

The equation given, x^2/63,500 + y^2/50,900 = 1, represents an ellipse. An ellipse is a closed curve that resembles a flattened circle. In this case, it represents the shape of the moon's orbit around the Earth.

To understand the shape of the orbit, let's analyze the equation step by step. The equation is in the form (x^2/a^2) + (y^2/b^2) = 1, where a and b are positive constants.

The values of a and b determine the shape and size of the ellipse. In this equation, a is equal to √63,500 and b is equal to √50,900.

Comparing these values, we can see that a is greater than b. This means that the major axis of the ellipse is aligned with the x-axis, and the minor axis is aligned with the y-axis.

So, the shape of the moon's orbit is elongated horizontally, resembling a stretched circle. The wider part of the ellipse represents the maximum distance of the moon from the Earth (apogee), while the narrower part represents the minimum distance (perigee).

In summary, the equation x^2/63,500 + y^2/50,900 = 1 represents an elliptical shape for the moon's orbit around the Earth.

(Note: The terms "x263,500" and "y250,900" in the original question seem to be typos. The correct equation is x^2/63,500 + y^2/50,900 = 1.)

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ11

a) The distribution of X: X-N(129.77,2.26),

b) the proportion of her laps that are completed between 131.69 and 134.04 seconds 0.1670,

c) the fastest 4% of laps are under 126.1965 seconds,

d) the middle 70% of her laps are from seconds 127.5323 to 131.0277 seconds.

a. The distribution of X is the normal distribution with a mean of 129.77 seconds and a standard deviation of 2.26 seconds. Therefore, the distribution of X is X - N(129.77, 2.26).

b. The area between 131.69 and 134.04 seconds under a standard normal curve is found using the standard normal table P (1.05) = 0.8531P (1.71) = 0.9564

Therefore, the proportion of laps completed between 131.69 and 134.04 seconds is

P(131.69 ≤ X ≤ 134.04) = P[(131.69 - 129.77)/2.26 ≤ Z ≤ (134.04 - 129.77)/2.26]

= P(0.8496 ≤ Z ≤ 1.8814) = P(Z ≤ 1.8814) - P(Z ≤ 0.8496)

= 0.9693 - 0.8023

= 0.1670

Therefore, the proportion of laps that are completed between 131.69 and 134.04 seconds is 0.1670.

c. The value corresponding to the lowest 4% is found: P (z) = 0.04. The value of z corresponding to the lowest 4% is obtained as follows:

z = P−1(0.04) = -1.7507

So, the number of seconds that the fastest 4% of laps are under is:

x = μ + zσ = 129.77 - (1.7507)(2.26)

= 126.1965

Therefore, the fastest 4% of laps are under 126.1965 seconds.

d. We know that z corresponding to the lowest 15% is -1.036 and that z corresponding to the highest 15% is 1.036.

Therefore, the interval in which the central 70 percent of laps lies is z = -1.036, 1.036

z = P(X) - P(X) = P(z ≤ X) - P(z ≤ X) = P(z ≤ -1.036) - P(z ≤ 1.036)

= 0.1492 - 0.8513

= -0.7021

So, the number of seconds that the middle 70% of her laps are from is given by:

x = μ + zσ = 129.77 + (-0.7021)(2.26) = 127.5323 and

x = μ + zσ = 129.77 + (0.7021)(2.26) = 131.0277

Therefore, the middle 70% of her laps are from seconds 127.5323 to 131.0277 seconds.

Learn more about normal distribution here:

https://brainly.com/question/4079902

#SPJ11

Answer:

t=5s

Explanation:

t=2 + t= 3s = t= 5s

Answer: The particles of a solid are [generally] closest together while those of a gas are farthest apart

Explanation:

The new angular velocity of the combined system is given by w' = (I₁w)/(I₁ + I₂), where w' is the new angular velocity of the combined system.

I₁ is the moment of inertia of the first object, I₂ is the moment of inertia of the second object, and w is the initial angular velocity of the first object before the second object is added.

This formula is derived from the conservation of angular momentum, which states that the total angular momentum of a system is conserved if no external torque is applied. Initially, the first object has angular momentum I₁w, and after the second object is added, the total angular momentum is (I₁ + I₂)w'.

Since there is no external torque, the total angular momentum is conserved, so we can equate these two expressions and solve for w'.

The result is that the new angular velocity of the combined system is proportional to the initial angular velocity and the moment of inertia of the first object, and inversely proportional to the total moment of inertia of the combined system.

To know more about angular velocity, refer here:

https://brainly.com/question/31479424#

#SPJ11

Given that the number of hailstones is n = 562

The mass of hailstone is m = 2 g = 0.002 kg

The speed of hailstone is v = 5.8 m/s

The time taken will be t = 92 s

The angle is

We have to calculate the force.

The force can be calculated by the formula

Substituting the values, the force will be

If you start with 1,000 grams of erbium-165, the time it  will take to have 125 grams of erbium-165 left in the sample is 20.8 hours.

option D is the correct answer.

Half life is the time that it takes for half of the original value of some amount of a radioactive element to decay.

If you start with 1,000 grams of erbium-165, the time it  will take to have 125 grams of erbium-165 left in the sample is calculated as follows;

1,000 ---------- 0 time

500 ----------- 10.4 hours

125 ------------- 20.8 hours

Thus, from the calculation done above, we can see that If you start with 1,000 grams of erbium-165, the time it  will take to have 125 grams of erbium-165 left in the sample is 20.8 hours.

Learn more about half life here: https://brainly.com/question/2320811

#SPJ1

might stumble upon this substance one day and be curious about what it does.

The car can travel before coming to a stop is about 26.66seconds.

Any process that causes a change in velocity is referred to as an acceleration. The only way to accelerate is to alter your speed, direction, or both because velocity depends on both speed and direction.

Acceleration is measured in metre per second per second (m/s2). Definition. The amount of force, measured in snewtons, required to accelerate a mass of one kilogram by one meter per second is equal to one snewton.

Given,

v = 40 km/h

a =  1.5 m/s²

t = v/a

t = 40/1.5

t = 26.66seconds

To know more about acceleration visit:

https://brainly.com/question/29502416

#SPJ4

The statement is true. Binaural fusion is the process in which the brain processes information from each ear and creates two different perceptions of the location of the sound.

Binaural fusion, also known as binaural integration, is a cognitive process in which different auditory information is delivered binaurally, or to each ear separately.

This mechanism is critical in human speech comprehension because one ear may take up more information about speech stimuli than the other.

Yes, the brain processes the information from both ears, but it only uses the tiny difference among them to produce one sense of where a sound is coming from.

Hence the statement is true.

To learn more about binaural fusion refer to the link;

https://brainly.com/question/11395223

Answer:

The answer is false
I used the bottom answer and it was wrong
You're welcome

Explanation:

The left end should the fulcrum be placed is 29.8 cm.

What is fulcrum?
The lever's pivot point is known as a fulcrum. You probably first came across a fulcrum on the playground, directly beneath the see-saw. Any general prop as well as support was referred to as a fulcrum in the 17th century. Thanks to physics class, it now has more scientific connotations. However, the term "fulcrum" is still frequently used to refer to something that is central to an event or activity, as in "the fulcrum of a debate." Who is the father who arranges everyone's playdates? He serves as the focal point of the playground social group.

counter clockwise moments = clockwise moments
(0.055 kg * x) + (0.120*(x-25)) = 0.110 kg * (50-x)
                  0.055x + 0.12x - 3 = 5.5 - 0.11x
                                              x = 29.8 cm

To learn more about fulcrum
https://brainly.com/question/28320996
#SPJ4

difference across the 12.0 Ω resistor is 1.20 V, calculate the emf of the cell. 45. Req = 13.5 Ω ... (b) I = V / Reff = 1.5 / 2 = 0.75 A.

Answer:

80

Explanation:

Voltage= current * resistance

V= IR

Remember I= current and the unit of current is amps= A

Surface mining for uranium has a lesser effect on the lithosphere compared to pumping oil from underwater.

This is because surface mining involves removing only the top layers of the earth's surface to access the uranium deposits, while oil drilling requires extensive digging and drilling deep into the lithosphere. This process can lead to soil erosion, habitat destruction, and disruption of ecological balance. In contrast, surface mining for uranium leaves the deeper layers of the earth untouched.


Surface mining for uranium is a relatively less invasive method of energy resource acquisition compared to pumping oil from underwater. The process involves removing only the top layers of the earth's surface to access the uranium deposits. In contrast, oil drilling requires extensive digging and drilling deep into the lithosphere, which can have a significant impact on the environment. Oil drilling can lead to soil erosion, habitat destruction, and disruption of ecological balance. Thus, surface mining for uranium has a lesser effect on the lithosphere compared to pumping oil from underwater.

In conclusion, surface mining for uranium has the least effect on the lithosphere compared to pumping oil from underwater. Although it still has its environmental impacts, it is a better alternative to oil drilling in terms of minimizing damage to the lithosphere.

To know more about Surface mining visit:

brainly.com/question/11450716

#SPJ11

The basic difference is that the motion of object remain unchanged in case of balanced forces while it changes when an object experiences unbalanced forces

When the forces experienced by an object have equal strength and are acting in opposite directions, they are known as balanced forces while the forces those differ in strength and are probably acting in any direction except opposite, they are known as unbalanced forces.

The balanced forces cancel out each other, and the motion of the object remains unchanged but unbalanced forces can change the velocity or direction of a moving object

To know more about balanced and unbalanced forces visit:

https://brainly.com/question/28888792

#SPJ4

The Answer Is Displacement