When cleaning a buret, begin by coating the inside with____ (detergent/water/NaOH solution) most of it out, then drain the rest by ______
(opening the stopcock/disassembling the buret, turning the buret upside-down). Rinse with________ (deionized water/tap water/acetone), then hang upside-down on a buret rack.

Answer:

give us something else to work with or this is just the best guess

Answer:

answer in picture

Explanation:

Rough ER is connected to the nuclear membrane and is responsible for the synthesis and processing of proteins.

The rough endoplasmic reticulum (ER) is a network of membrane-bound sacs and tubules that is studded with ribosomes on its surface. These ribosomes are responsible for protein synthesis. The rough ER is connected to the nuclear membrane because it receives instructions for protein synthesis from the DNA in the nucleus. This connection allows for the efficient transfer of genetic information from the nucleus to the rough ER.

Once the ribosomes on the rough ER synthesize proteins, the rough ER is also involved in the processing and modification of these proteins. It helps in folding the newly synthesized proteins into their functional three-dimensional shapes and also adds various modifications such as glycosylation (the addition of sugar molecules) or signal sequences that target the proteins to specific locations within or outside the cell.

After processing, the proteins may be transported to other parts of the cell or exported to the cell membrane or extracellular space. The connection between the rough ER and the nuclear membrane ensures a coordinated flow of genetic information and protein synthesis, allowing the cell to efficiently carry out its functions.

for such more questions on  proteins

https://brainly.com/question/30245761

#SPJ8

The limiting and excess reactant can be obtained as follow:

2Mg + O₂ -> 2MgO

From the balanced equation above,

48 g of Mg reacted with 32 g of O₂

Therefore,

62.1 g of Mg will react with = (62.1 × 32) / 48 = 41.4 g of O₂

We can see from the above that only 41.4 g of O₂ is required to react completely with 62.1 g of Mg.

Thus, the limiting reactant is magnesium, Mg and the excess reactant is oxygen, O₂

The mass of the excess reactant remaining can be obtained as shown below:

Mass of excess reactant remaining = Mass given - mass reacted

Mass of excess reactant remaining = 100 - 41.4

Mass of excess reactant remaining = 58.6 g

The mass of H₂SO₄ produced can be obtained as illustrated below:

Mg + O₂ -> 2MgO

From the balanced equation above,

48 g of Mg reacted to produce 80 g of MgO

Therefore,

62.1 g of Mg will react to produce = (62.1 × 80) / 48 = 103.5 g of MgO

Thus, the mass of product, MgO produced is 103.5 g

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

Complete question:

If 62.1 grams of magnesium react with 100.0 grams of oxygen, how many grams of product are produced?

Which is the Limiting reactant?

Which is the Excess reactant?

How many grams of excess reactant remain?

The value of ΔG at 25 °C for the given reaction is: ΔG = -370.4 kJ/mol + 0 = -370.4 kJ/mol So, the correct answer is -370.4 kJ/mol

To determine the value of ΔG (Gibbs free energy) at 25 °C for the given reaction:

25 (s, rhombic) + 3/2 \(O_2\)(g) → \(2SO_3\)(g)

We can use the equation:

ΔG = ΔG° + RT ln(Q)

where:

ΔG is the standard Gibbs free energy change

ΔG° is the standard Gibbs free energy change under standard conditions

R is the gas constant (8.314 J/(mol·K) or 0.008314 kJ/(mol·K))

T is the temperature in Kelvin (25 °C = 298 K)

Q is the reaction quotient, which is the ratio of the concentrations of the products to the concentrations of the reactants at a given point during the reaction.

Given that ΔG° is -370.4 kJ/mol, we can plug the values into the equation:

ΔG = -370.4 kJ/mol + (0.008314 kJ/(mol·K) * 298 K) * ln(Q)

Now, we need to determine the value of Q. Since all reactants and products are in their standard states, Q = 1, as their concentrations are taken to be 1.

ΔG = -370.4 kJ/mol + (0.008314 kJ/(mol·K) * 298 K) * ln(1)

Since ln(1) = 0, the term (0.008314 kJ/(mol·K) * 298 K) * ln(1) becomes 0.

Therefore, the value of ΔG at 25 °C for the given reaction is:

ΔG = -370.4 kJ/mol + 0 = -370.4 kJ/mol

So, the correct answer is -370.4 kJ/mol.

For more such questions on reaction visit:

https://brainly.com/question/11231920

#SPj8

Answer:

I can say that knowledge of separating mixtures can help us in daily life and within society in the following ways:

1. Purification of water: Separation techniques are used to purify water for drinking and industrial purposes. It is essential to remove impurities from water to prevent diseases.

2. Recycling: Separation techniques are used to separate materials for recycling. This helps reduce the amount of waste in landfills and helps conserve resources.

3. Food industry: Separation techniques are used in the food industry to separate unwanted particles from food products. This helps ensure that the food we eat is safe and free from contaminants.

4. Medicine: Separation techniques are used in the pharmaceutical industry to separate and purify chemicals for use in medicine. This helps ensure that medicines are safe and effective.

5. Environmental protection: Separation techniques are used to remove pollutants from the environment. This helps protect our natural resources and prevent pollution-related health problems.

6. Oil and gas industry: Separation techniques are used to separate crude oil and natural gas into their various components. This helps in the production of energy and other useful products.

In summary, knowledge of separating mixtures is essential in our daily lives and within society. It helps ensure that we have access to safe and clean water, food, medicine, and energy, and also helps protect the environment.

Explanation:

Answer:

Radiation is energy that comes from a source and travels through space at the speed of light.

Explanation:

Radiation is energy that comes from a source and travels through space at the speed of light. This energy has an electric field and a magnetic field associated with it and has wave-like properties. You could also call radiation “electromagnetic waves”

Hope this helps :)

Answer: Here u go!

Explanation:

The electron cloud of argon is thus larger and more polarized, able able to express mawr inter molecular forces Vander Waals forces, which results in a higher boiling point due to these increase forces. Due to this, the boiling point of argon is higher are gone. We can see its boiling point is 87.2 Kelvin's, whereas a neon and spoiling point is 24.5.

Hope this helps!

Explanation:

Argon has an atomic number of 18, while neon has an atomic number of 10.

The atomic radius is comprised of the atom’s nucleus and electron cloud. As you go down on the periodic table, the effective nuclear charge decreases. This results in more screening of the electrons

from the nucleus (decreasing the attraction between the nucleus and the electrons) resulting in a larger atomic radius.

However, because they’re both noble gasses, the size difference in this case can be easier described by the number of particles in each atom.

Argon has 18 protons, 18 electrons and 22 neutrons.

Neon has 10 protons, 10 electrons and 10 neutrons.As you can see, argon has more “stuff.”

The increase in protons and electrons in particular results in a larger electron cloud, which means a much larger atomic radius than in neon.

i hope it helps u :)

The velocity of electron will be 5.2 × 10⁶ m/s

The de Broglie wavelength of a particle indicates the length scale at which wave-like properties are important for that particle.

De Broglie wavelength is usually represented by the symbol λ or λdB.

For a particle with momentum p, the de Broglie wavelength is defined as:

                                               λ = h / p

where h is the Planck constant

Given,

Mass of electron = 9.11×10⁻³¹ kg

Bond length = 1.4 × 10⁻¹⁰ m

                                         λ = h ÷ mv

h = 6.62×10⁻³⁴ J/s

                     1.4 × 10⁻¹⁰ = 6.62×10⁻³⁴ ÷  (9.1 × 10⁻³¹× v)

                                   v =  6.62×10⁻³⁴ ÷ 1.27 × 10⁻⁴⁰

                                    = 5.2 × 10⁶ m/s

Therefore, the velocity of electron will be 5.2 × 10⁶ m/s

Learn more about de Broglie wavelength, here:

https://brainly.com/question/17295250

#SPJ1

The binding energy per nucleon for the ¹⁹F nucleon is equal to 7.786 MeV/nucleon.

Binding energy can be defined as the minimum quantity of energy that is required to remove the particle from the system. Nuclear binding energy can be described as the energy required to dismantle a nucleus of an atom into free neutrons and protons.

The binding energy will be determined from the mass defect. Mass defect is calculated from the difference between the mass observed and the expected combined mass.

Given the mass of the ¹⁹F = 18.9984 a.m.u.

The mass defect for the ¹⁹F can be calculated as:

Δm = \((M _n +M_p) - M_F\)

\(\triangle m =( 9\times 1.0078 + 10 \times 1.0087 )- 18.9984\)

\(\triangle m =0.1588 \;a.m.u.\)

The binding energy for the fluorine can be calculated as:

E = Δmc²

E = 0.1588 × 931.5

E = 147.92 MeV

The binding energy per nucleon of ¹⁹F can be calculated as:

B.E.N. = 147.92/18.9984 = 7.786 MeV per nucleon

Learn more about binding energy, here:

https://brainly.com/question/10095561

#SPJ1

The statement is correct. The photoelectric effect refers to the phenomenon where electrons are ejected from the surface of a material when it is exposed to light. The frequency of light striking an electron in a metal must be above the threshold frequency in order for the photoelectric effect to occur.

The statement is correct. The photoelectric effect refers to the phenomenon where electrons are ejected from the surface of a material when it is exposed to light. However, for the photoelectric effect to occur, the frequency of the incident light must be above a certain threshold frequency.

The threshold frequency is the minimum frequency of light required to dislodge electrons from the material. Below this threshold frequency, regardless of the intensity or duration of the light, no electrons will be emitted.

This behavior can be explained by the particle-like nature of light, where light is composed of discrete packets of energy called photons. The energy of a photon is directly proportional to its frequency. Only photons with energy greater than or equal to the binding energy of the electrons in the material can dislodge them.

Therefore, the frequency of light striking an electron in a metal must be above the threshold frequency in order for the photoelectric effect to occur.

For more question on photoelectric

https://brainly.com/question/1458544

#SPJ8

Answer:

Explanation:

It is odd to describe the presence of a given substance and its dissolved species as a competition but the state is called an equilibrium in solubility.

Answer:

Solubility

Explanation:

Mark that

The amount of given substance and dissolved species is constant at equilibrium .

As per le ch atler's principle

If you change the concentration it would affect the Equilibrium n

Explanation:

Hope this somewhat helped:

a. The equation for the reaction of weak acid, C6H5CO2H, with water is: C6H5CO2H + H2O <=> C6H5CO2^- + H3O^+. We can assume that all the C6H5CO2H has reacted with water to form C6H5CO2^- and H3O^+.

The pH is defined as -log(H30^+ concentration), where H30^+ is the hydronium ion, a measure of the acidic strength of the solution. At the equivalence point, all the C6H5CO2H has reacted with the NaOH to form C6H5CO2^- and Na^+. The stoichiometry of the reaction can be determined by balanced the reaction using the information given.

C6H5CO2H + NaOH <=> C6H5CO2^- + Na^+

This reaction tells us that one mole of C6H5CO2H will react with one mole of NaOH to form one mole of C6H5CO2^- and one mole of Na^+.

Air masses always move in double direction depending on the type of air mass.

Air masses is defined as the volume of air that has a specific characteristics of either high or low humidity and temperature.

There are various types of air masses which also has different direction of movement. They include the following:

Therefore, the movement of air masses would probably depend on the type of air mass.

Learn more about air mass here:

https://brainly.com/question/26209372

#SPJ1

The reaction order and specific reaction rate constant can be determined by performing the kinetics experiment on irreversible polymerization A. Kinetic experiments can be used to investigate the rate and mechanism of chemical reactions. Chemical kinetics is the study of chemical reactions' speed and pathway.

For such more question on polymerization

https://brainly.com/question/1602388

#SPJ8

Answer:

take 75 gm or it will be overdose

The electric current is  0.025 A

Electric current refers back to the go with the flow of energy in an electronic circuit and to the amount of strength flowing through a circuit. it's far measured in amperes (A). the bigger the cost in amperes, the more energy is flowing within the circuit.

Ag+ + e¯ →Ag

1F deposits 107.87 g/mol (molecular mass) of silver

1F = 96500 C

Let, 107.87 g/mol needed = 96500 C

Number of coulombs required to deposit 0.3650 g of silver =(96500/107.87) 0.3650  

Q = 326.5 C

According to Faraday’s law, Q = I x t

I = 326.5 C / (216 x 60 s) = 0.025 A

Learn more about electric current here:-https://brainly.com/question/2984202

#SPJ9

Answer: Protects your eyes from chemical splashes, Must be worn during all labs, from start to lab checkout, in which chemicals, glass or heating of substances is involved. No exceptions!!

Answer:

Explanation:

the sum of number of proton and neutron is known as atomic mass

so if number of proton is 4 and neutron is 5 then atomic mass of an atom is 9

The given question is incomplete as it lacks the appropriate options, however, the options related to this question is as follows:

a)Test a composite material in the lab to see how it can be improved.

b)Look into trends of various diseases and their effects on society.

c)Research available drugs for treating illnesses such as cancer and heart disease, as well as the side effects of these drugs.

d)Make a plan for how to conquer a disease with drugs.

Answer:

The correct answer is - b)Look into trends of various diseases and their effects on society.

Explanation:

The young scientist who wants to focus on creating drugs to treat disease must think and look for the diseases that are needed to be treated at the moment or affecting the population most and how it affects the society and then plan how to do it.

So, the scientist needs to check the trends of various disease and their effect on society for developing understanding which disease needs to be cure first and how it affects.

Thus, the most appropriate answer is - option B.

Answer:

b)Look into trends of various diseases and their effects on society.

Explanation:

ap3x

The correct option is 2.

A 88

B 94

C 100

To solve this problem, we need to use our knowledge of how streams flow and how velocity changes in different parts of the stream.

Typically, streams flow fastest in the center of the channel and slowest along the edges, due to friction with the banks and bottom of the stream.

Given that it lies in the middle of the stream's two extreme velocities, option 2, which equals 94, is probably the right response. The velocity near the channel's middle is probably closer to 100 because the stream runs there the quickest.

On the other hand, it is likely that the velocity near the edges is closer to 88 since the stream runs more slowly along the edges due to friction with the banks and streambed. Consequently, a velocity of 94 is the most logical choice because it is within the range that is  predicted by the velocity distribution of a stream.

Learn more about streams at:

https://brainly.com/question/14012546

#SPJ1

The benzocaine molecule has 23 atoms in all (s). There are two oxygen atoms, nine carbon atoms, one nitrogen atom, and eleven hydrogen atoms (s). Therefore, the chemical formula for benzocaine is:

C9H11NO2

Unlike the empirical formula, which gives the numerical proportions of atoms of each type, the molecular formula, as shown above, indicates the numbers of each type of atom in a molecule without providing structural information.

Stoichiometry, or the computation of the relative quantities of reactants and products in chemical processes, is based on the chemical formula above. The quantity of each element specified in the chemical formula must remain constant according to the law of conservation of mass.

Learn more about molecule here:
https://brainly.com/question/19922822

#SPJ9

Answer: 2.4e+24

Explanation:

It could just as easily have been selected to be 1/24th of the mass of one atom of a carbon atom, or 1/10th the mass of a calcium atom, A sample of 250 grams is equivalent to 1.58 moles of potassium permanganate.

Answer:

I think it's 13.57

Explanation:

I hope this helps

Answer:

45 g of salt was added

Explanation:

238g-193g=45g

Answer:

b

Explanation:

because it is moving so it has kinetic energy

The pH value of 500 mL of an aqueous solution of 0.005 mole HCl is 2

We'll begin our calculations by obtaining the molarity of the solution. Details below:

Molarity = mole / volume

Molarity = 0.005 / 0.50

Molarity = 0.01 M

Next, we shall obtain the concentration of the hydrogen ion, H⁺ in the solution. Details below:

HCl(aq) <=> H⁺(aq) + Cl¯(aq)

From the balanced equation above,

1 mole of HCl contains 1 mole of H⁺

Therefore,

0.01 M HCl will also contain 0.01 M H⁺

Thus, the concentration of the hydrogen ion, H⁺ in the solution is 0.01 M

Finally, we shall determine the pH of the solution. Details below:

pH = -Log H⁺

pH = -Log 0.01

pH = 2

Thus, we can conclude that the pH of the solution is 2

Learn more about pH:

https://brainly.com/question/22983829

#SPJ1

The partial pressure of hydrogen in the collected gas sample is 733.0 mm Hg (calculated by subtracting the partial pressure of water, 17.0 mm Hg, from the total atmospheric pressure, 750.0 mm Hg).

When a gas is collected over water, the presence of water vapor affects the total pressure observed. In this case, the total atmospheric pressure is given as 750.0 mm Hg, and the partial pressure of water vapor at 19.5°C is 17.0 mm Hg.

To determine the partial pressure of hydrogen, we need to subtract the partial pressure of water vapor from the total atmospheric pressure. Partial pressure refers to the pressure exerted by an individual gas component in a mixture. In this scenario, the collected gas is primarily hydrogen, with water vapor being the other component.

By subtracting the partial pressure of water vapor (17.0 mm Hg) from the total atmospheric pressure (750.0 mm Hg), we can find the partial pressure of hydrogen:

Partial pressure of hydrogen = Total atmospheric pressure - Partial pressure of water vapor

Partial pressure of hydrogen = 750.0 mm Hg - 17.0 mm Hg

Partial pressure of hydrogen = 733.0 mm Hg

Therefore, the partial pressure of hydrogen in the collected gas sample is 733.0 mm Hg.

Know more about hydrogen here:

https://brainly.com/question/24433860

#SPJ8