When an aeroplane is flying at an airspeed which is 1.3 times its basic stalling speed, the coefficient oflift as a percentage of the maximum lift coefficient (CLmax) would be:A) 59%.B) 77%.C) 130%.D) 169%.
Answers
When an airplane is flying at an airspeed which is 1.3 times its basic stalling speed, the coefficient of lift as a percentage of the maximum lift coefficient (CLmax) would be approximately 77%, which is option B.
The maximum lift coefficient is the highest value of the coefficient of lift that an aircraft can achieve before it stalls. This coefficient of lift is a function of the angle of attack and airspeed of the aircraft.When an aircraft is flying at an airspeed which is 1.3 times its basic stalling speed, it means that the aircraft is flying faster than its stalling speed. This is important because the stalling speed is the minimum speed required for an aircraft to maintain lift and stay airborne. If an aircraft flies too slowly, it will lose lift and stall.At this higher airspeed, the coefficient of lift is 77% of the maximum lift coefficient. This means that the aircraft is generating a significant amount of lift and can maintain its altitude even though it is flying faster than its stalling speed. However, it is important to note that flying too close to the stalling speed, even at 1.3 times, can be dangerous and pilots must always be aware of their aircraft's speed and performance to ensure safe flight.For such more question on coefficient
https://brainly.com/question/1038771
#SPJ11
Related Questions
Many of the problems applied scientists address are multidisciplinary issues and therefore require the collaboration of scientists with a variety of skills and knowledge. Explain which types of scientists might be involved in studying global warming.
Answers
The consensus couldn’t be clearer. Climate change is happening. It’s caused primarily by the burning of oil, gas, and coal. If we do nothing, the world will become significantly less habitable.
We’ve lost precious time, but if we act now—decisively and dramatically—we still have a chance at avoiding climate change’s most catastrophic impacts
Fast fourier transforms (FFT) are algorithms that speed up the computation of fourier coefficients compared to the traditional direct form discuss how the speed up is achieved
Answers
Answer:
Fast Fourier ( FFT ) algorithms speed up computation of Fourier coefficients by simply reducing the the computing time of a traditional direct form Fourier series. it achieves this by breaking complex DFTS into smaller DFTS to reduce its complexity and in turn reduce its computing time
Explanation:
Fast Fourier ( FFT ) algorithms speed up computation of Fourier coefficients by simply reducing the the computing time of a traditional direct form Fourier series. it achieves this by breaking complex DFTS into smaller DFTS to reduce its complexity and in turn reduce its computing time. an example of such FFT is Cooley-Tukey algorithm
Exercise 15 Write a function select of this type: 'a list ('a -> bool) -> 'a list that takes a list and a function fas parameters. Your function should applyf to each element of the list and should return a new list containing only those elements of the original list for which f returned true. (The elements of the new list may be given in any order.) For example, evaluating select ([1,2,3,4,5,6,7,8,9,10), is Prime) should result in a list like [7,5, 3,2]. This is an example of a higher-order function, since it takes another function as a parameter. We will see much more about higher-order functions in Chapter 9
Answers
An ordered group of values is a list. The components of a list are referred to as its elements or items. The terms element and item will both refer to the same object. Strings are ordered collections of characters.
The syntax for gaining access to a list's items is the same as the grammar for gaining access to a string's characters. The index operator is employed ( [] – not to be confused with an empty list). append() adds the element to the list's end. The element is inserted prior to the specified index using insert(). extend() adds items from the iterable to the list, extending it. Concatenating multiple lists to generate a single new list is possible with the + operator. Lists are arranged groups of objects that make it simple to use a set of data in Python. List items are entered between square brackets [] and are spaced out with commas. It is best to leave a blank space between the comma and the next value.
To learn more about Strings click on the link below:
brainly.com/question/30099412
#SPJ4
1.Shortcut operators are faster than the conventional arithmetic operators.
2.You can declare more than one variable in a single line.
3.You must use else after every if statement.
what is answer?
Answers
It's important to note that this speed difference is only noticeable for large programs. For small programs, the difference is negligible.
1. Shortcut operators are faster than the conventional arithmetic operators: This statement is true. Shortcut operators are faster because they combine arithmetic operations with variable assignments in a single statement. For example, instead of writing "a = a + 2", you can write "a += 2". This saves time and reduces the amount of code you need to write. However, it's important to note that this speed difference is only noticeable for large programs or when dealing with complex calculations. For small programs, the difference is negligible.
2. You can declare more than one variable in a single line: This statement is also true. In many programming languages, you can declare and initialize multiple variables on the same line. For example, instead of writing "int a; int b; int c;", you can write "int a, b, c;". This saves space and makes your code more concise. However, it's important to note that you should only do this if the variables are related and have the same data type.
3. You must use else after every if statement: This statement is false. It's not necessary to use else after every if statement. You can use if statements on their own if you don't need to execute any code if the condition is not true. However, if you need to execute code in both cases (true and false), then you should use else. It's also important to note that you can use else if to test for additional conditions if the first if statement is not true.
Learn more about programs :
https://brainly.com/question/14368396
#SPJ11
Many vehicles use halogen light bulbs. What must you avoid when handling halogen bulbs?
Answers
Answer:
here
Explanation:
try not to touch the Glass on Halogen Light Bulbs, even when changing the bulb. This is because when you touch a Halogen Light Bulb, you leave behind a residue on the Light Bulb which can in time cause the bulb to heat up unevenly, and even cause the bulb to shatter as a result.
a steam power plant receives heat from a furnace at a rate of 280 gj/h. heat losses to the surrounding air from the steam as it passes through the pipes and other components are estimated to be about 8 gj/h. if the waste heat is transferred to the cooling water at a rate of 165 gj/h, determine (a) net power output and (b) the thermal efficiency of this power plant.
Answers
The net output is 35.28 MW and the thermal efficiency of this power plant is 45.35%
The net power output is obtained by subtracting the heat losses and heat getting rejected to the cooling water from heat supplied to the steam power plant
e. W. out = Qin-Qout-Qloss
Wout = 280 – 145 – 8 = 127GJ/h
Wout= 127 GJ/hX1000MJ/ 1GJ *1h /36005= 35.28 MW
Thermal efficiency can be given as:
ηth=Wout/Qin =127GJ/h/280GJ x 100 = 45.35%
A power plant is a type of commercial building that uses primary energy to produce electricity. To deliver power to the electrical grid and meet society's electrical needs, most power plants employ one or more generators that transform mechanical energy into electrical energy. Raw energy sources like coal, nuclear heat, or wind are transformed by power plants into useful energy in the form of electricity. One of the most popular kinds of power plants is a thermal power plant, which generates energy by burning fuel and converting it to electricity.
Learn more about power plant here:
https://brainly.com/question/7670779
#SPJ4
Which scale is based on tenths and hundredths of an inch?
Select one:
a. Architect's
b. Civil engineer's
c. Decimal
d. Mechanical engineer's
Answers
The scale that is based on the tenths and hundredths of an inch is c. Decimal.
The decimal scale is a measurement system that is based on tenths and hundredths of an inch. It is a precise measurement system commonly used in various fields such as engineering, manufacturing, and construction.
In the decimal scale, one inch is divided into 10 equal parts, with each part being referred to as a "tenth". Each tenth is further divided into 10 equal parts, resulting in 100 equal parts, with each part being referred to as a "hundredth". Therefore, one inch is equal to 10 tenths or 100 hundredths.
For example, a measurement of 2.45 inches would mean 2 whole inches and 45 hundredths of an inch. This can be represented as 2.45 on the decimal scale. The decimal scale is used for precision measurements where accuracy is important, and it is commonly used in applications such as machining, metrology, and inspection.
Learn more about the Decimal scale: https://brainly.com/question/29081533
#SPJ11
In a transverse wave, the distance between two adjacent crests is _____ the distance between two adjacent troughs.
a. Less than.
b. Greater than.
c. Equal to.
Answers
In a transverse wave, the distance between two adjacent crests is equal to the distance between two adjacent troughs.
What is transverse wave?
A transverse wave is a type of wave that moves perpendicular to the direction of the wave. This is in contrast to a longitudinal wave, which moves parallel to the direction of the wave.
An example of a transverse wave is a wave in a rope. When a rope is shaken from side to side, the wave travels along the rope, but the displacement of the rope is perpendicular to the direction of the wave.
Another example of a transverse wave is a light wave, which consists of oscillating electric and magnetic fields that are perpendicular to the direction of the wave's propagation.
To learn more about transverse wave, visit: https://brainly.com/question/13438578
#SPJ4
Which of the following is not part of Active Directory's logical structure? a. Forest b. OU c. Tree d. Domain Controller(DC).
Answers
The term that is not part of Active Directory's logical structure is Domain Controller (DC). Option D is correct.
Active Directory is a hierarchical directory service that stores information about objects on a network, such as users, computers, and resources. The logical structure of Active Directory consists of four main components: Forest, Tree, Domain, and Organizational Unit (OU).
Domain Controller (DC) is a physical server that hosts Active Directory Domain Services (AD DS), which is responsible for storing and managing the directory information for a domain. While DCs are an essential component of Active Directory infrastructure, they are not part of Active Directory's logical structure.
Therefore, option D is correct.
Learn more about logical structure https://brainly.com/question/30165070
#SPJ11
1. Using the formula above, complete this task.
Concrete is currently sold in increments of 12 yd'. Concrete current cost is $45 per V2 yd. How much would it cost a Shameka's Construction Company to cement a pad size 18ft x 20 ft. floor, 4 inches thick?
Answers
Answer:
gfbhjdskmlgtg
Explanation:
grtwhjyeywhtagsfdd
What is graphic software
Answers
Answer:
In computer graphics, graphics software refers to a program or collection of programs that enable a person to manipulate images or models visually on a computer. Computer graphics can be classified into distinct categories: raster graphics and vector graphics, with further 2D and 3D variants.
an experimental study is conducted to compare edm performance between rc circuit and transistor-based generator under the same individual pulse discharge energy (e d) and cycle frequency of 6.25 khz. the workpiece is hardened steel and the dc power supply is 240 v. (1) in transistor-based generator, the duty factor is set 0.5 and the measured discharge voltage and current are 30 v and 80 a, respectively. what is the individual pulse discharge energy (ed)?
Answers
E_d = 0.5 * C * V^2
where C is the capacitance and V is the voltage.
Since the duty factor is 0.5, the discharge time (t_d) is equal to the period (T) divided by 2:
t_d = T / 2 = 1 / (2 * f) = 1 / (2 * 6250) = 8 × 10^-5 s
The capacitance can be calculated using the formula:
C = I * t_d / (V - V_f)
where I is the current, V is the discharge voltage, and V_f is the forward voltage drop of the diode.
Assuming a diode forward voltage drop of 0.7 V, we can calculate the capacitance:
C = 80 * 8 × 10^-5 / (30 - 0.7) = 0.000281 F
Now we can calculate the individual pulse discharge energy:
E_d = 0.5 * C * V^2 = 0.5 * 0.000281 * 30^2 = 0.038 J
Therefore, the individual pulse discharge energy (E_d) is 0.038 J.
An engine starting system must crank or spin the engine until fuel _______ forces the pistons down and the engine begins to operate on its own power.
Answers
An engine starting system must crank or spin the engine until fuel ignites forces the pistons down and the engine begins to operate on its own power.
What is Engine?Engine is a machine that converts energy into mechanical work. It is a device that takes an energy source, such as electricity, fuel, or solar power, and converts it into a form of energy that can be used to drive a machine, such as a car, truck, boat, or generator. Engines are used in almost all forms of transportation, from cars and trucks to boats and planes. They are also used in many industrial and commercial applications, such as manufacturing, power generation, and construction. Engines are composed of a number of components, including cylinders, pistons, valves, and a crankshaft. The pistons in the cylinders move up and down, creating energy that is then converted into movement that drives the crankshaft and ultimately powers the machine. Engines are usually powered by gasoline, diesel, or other fuels, although some can use electricity or solar power. They come in many different sizes and configurations, and are found in a variety of vehicles, from cars and motorcycles to boats and plane.
To learn more about Engine
https://brainly.com/question/13146091
#SPJ1
An engine starting system must crank or spin the engine until fuel Combustion forces the pistons down and the engine begins to operate on its own power.
What is Combustion?Combustion is a chemical reaction in which a substance reacts quickly with oxygen and produces heat. The original substance is referred to as the fuel, and the source of oxygen is referred to as the oxidizer. The fuel can be solid, liquid, or gas, but it is usually a liquid for aeroplane propulsion. Similarly, the oxidizer could be a solid, liquid, or gas, but for aeroplanes, it is usually a gas (air). A solid fuel and oxidizer are used in model rockets.
New chemical substances are formed during combustion from the fuel and the oxidizer. These substances are referred to as exhaust. The majority of the exhaust is caused by chemical reactions between the fuel and oxygen.
Learn more about Combustion
https://brainly.com/question/15117038
#SPJ1
How many times will the print statement execute? for i in range(1, 3): for j in range(8, 12, 2): print(f{i}. {i}') O a. 9 Ob.4 O c. 6 O d. 36
Answers
Answer:
Option2 4
Explanation:
in lab you propel a cart with four known forces while using an ultrasonic motion detector to measure the cart's acceleration your data is as follows
A. FORCE(N) ACCELERATION (m/s^2)
B. 0.25 0.5
C. 0.50 0.8
D. 0.75 1.3
E. 1.8
is there another data point that would be reasonable to add even though you made no measurements? if so, what is it?
Answers
A data professional must regularly deal with the issue of missing data. Although there are currently a lot of articles, blogs, and videos available.
I discovered that it is challenging to locate a piece of condensed, short information in a single location. That is why I made the effort to put this together in the hopes that any data enthusiast or practitioner will find it useful. Unavailable numbers that would have meaning if observed are referred to as missing data. Lost data might include a variety of things, such as a missing sequence, an incomplete feature, missing files, incomplete information, data entry errors, etc. In the actual world, most datasets have missing information. Prior to using missing data fields, those fields must be transformed so that they may be used for analysis and modeling.
Learn more about data here:
https://brainly.com/question/10980404
#SPJ4
A model of living systems as whole entities which maintain themselves through continuous input and output from the environment, developed by ludwig von bertalanffy is known as?
Answers
A model of living systems as whole entities which maintain themselves through continuous input and output from the environment, developed by ludwig von bertalanffy is known as Systems theory.
what are the application of systems theory?
It is a theoretical framework to understand the working mechanism of an organization.
It is an entity where all the elements necessary to carry out its functions.
A computer is the best example of showing the mechanism of system theory.
computer is a system which has many smaller sub-systems that have to work in coordinated manner.
These sub-systems are the processor, RAM, motherboard, hard drive and power supply.
Learn more about systems theory , here:
https://brainly.com/question/28278157
#SPJ4
we wish to design a closed circuit supersonic wind tunnel that produces a mach 2.8 flow at standard sea level conditions in the test section and has a mass flow rate of air of 15 kg/s. calculate the necessary reservoir pressure and temperature, the nozzle throat area, the test section area, and the diffuser throat area. assume a worst case stagnation pressure loss in the test section based on a normal shock.
Answers
How fast is the fastest wind tunnel?
The JF-22 wind tunnel, which would be the fastest in the world, would be situated in the Huairou District of northern Beijing and be capable of simulating flights at speeds of up to 10 km/s, or 30 times the speed of sound.
What is wind tunnel?They measure conditions that affect aircraft and other equipment, such as elevation, drag, shockwaves, and others. that speed against the wind. Additionally, those tunnels can assist engineers in figuring out how wind interacts with stationary objects like buildings and bridges and finding ways to strengthen and make them safer.Learn more about wind tunnels here:
brainly.com/question/15561541
#SPJ4
which type of storage device in a linux system has no logical division in blocks?
Answers
The type of storage device in a Linux system that has no logical division in blocks is a character device.
In Linux, storage devices can be classified as either block devices or character devices. Block devices are storage devices that are accessed in fixed-size blocks, typically in units of sectors or blocks. Examples of block devices include hard disk drives (HDDs) and solid-state drives (SSDs).
On the other hand, character devices do not have a logical division in blocks. They are accessed character by character, without any fixed block size. Character devices are used for sequential and stream-oriented input/output operations. Examples of character devices include serial ports, tape drives, and network interfaces.
Character devices are often used for devices that do not fit the block-oriented model, such as devices that transmit or receive data in a continuous stream, or devices that communicate with the system in a serial manner.
Character devices in a Linux system do not have a logical division in blocks. They are accessed character by character and are typically used for devices that operate in a continuous stream or communicate in a serial manner.
For more such questions on Storage device:
brainly.com/question/26382243
#SPJ11
Problem 2: Question
Consider the circuit diagram below. Reduce this circuit to an equivalent circuit containing only a voltage source and a single resistor.
Note: Your conclusion should state the value of the resistor in the reduced circuit.
Answers
1. A furniture company manufactures desks and chairs. The sawing department cuts the lumber for both products, which is then sent to separate assembly departments. Assembled items are sent for finishing to the painting department. The daily capacity of the sawing department is 120 chairs or 80 desks. The chair assembly department can produce 60 chairs daily and the desk assembly department 60 desks daily. The paint department has a daily capacity of either 90 chairs or 110 desks. Given that the profit per chair is $20 and that of a desk is $50, determine the optimal production mix for the company. Solve the problem graphically.
Answers
The optimal production mix for the company is 30 chairs and 60 desks, resulting in a profit of $4200.
To determine the optimal production mix for the furniture company, we need to find the combination of chairs and desks that maximizes the company's profit. Let's solve this problem graphically.
Let's assume x represents the number of chairs produced and y represents the number of desks produced.
Constraints:
1. Sawing department: 120x + 80y ≤ 120 chairs or 80 desks
2. Chair assembly department: x ≤ 60 chairs
3. Desk assembly department: y ≤ 60 desks
4. Paint department: 90x + 110y ≤ 90 chairs or 110 desks
The objective is to maximize profit, which can be represented as P = 20x + 50y.
We plot the feasible region formed by the constraints on a graph and then identify the corner points of the region. The corner point that maximizes the profit is the optimal production mix.
Solving the equations and graphing the feasible region, we find that the corner points are:
A(0, 0), B(0, 60), C(30, 60), D(60, 30), E(60, 0)
Evaluating the profit function at these corner points, we find:
A(0, 0): P = 0
B(0, 60): P = 60 * $50 = $3000
C(30, 60): P = (30 * $20) + (60 * $50) = $4200
D(60, 30): P = (60 * $20) + (30 * $50) = $3300
E(60, 0): P = 60 * $20 = $1200
Therefore, the optimal production mix for the company is 30 chairs and 60 desks, resulting in a profit of $4200.
For more such questions on optimal production, click on:
https://brainly.com/question/30087755
#SPJ11
Does the optimal checkpoint period increase or decrease
when this recovery time M increases?
Answers
In computer science, a checkpoint is a point in the computation of a program at which progress is saved to disk or other durable storage so that if a failure occurs.
The program can be restarted from the last checkpoint rather than from the beginning. Checkpoints are used to decrease the recovery time of a program in the event of a failure. Recovery time is defined as the time it takes to restart a program from a checkpoint after a failure.
When the checkpoint interval is too short, the overhead of saving and restarting the program exceeds the benefits of reduced recovery time. When the checkpoint interval is too long, the recovery time is long because the program must be restarted from an earlier checkpoint. As a result.
To know more about checkpoint visit:
https://brainly.com/question/1411991
#SPJ11
The ultimate BOD of a river at the confluence of the river and a sewage outfall is 50 mg/L and the DO is at the saturation value of 9.0 mg/L after mixing. The deoxygenation (or decay) rate coefficient (Kd) is 0.3 d-1 and the reaeration rate coefficient (Kr) is 0.9 d-1. The river is flowing at a velocity of 48 miles/day and the only source of BOD is from the sewage discharge.
Required:
a. Find the critical distance downstream (in miles) at which DO is a minimum.
b. Find the minimum DO (in mg/L)
c. If a wastewater treatment plant is to be built, what fraction of the BOD would have to be removed from the sewage to assure a minimum of 5.0 mg/L everywhere downstream?
Answers
Answer:
c
Explanation:
R1 = 7926 Ω, R2 = 327 Ω, and R3 = 5802 Ω, and 600 V is applied between A and B. What is the current flow through R3?
Answers
You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner.The formula used for this is as follows:Total R = R1 plus R2 plus R3 and so on
Solve the problem ?According to symmetry a and b are at same potential. So current in R3 is zero.The following equation can be used to calculate the TOTAL RESISTANCE in a parallel circuit: 1/Rt = 1/R1 + 1/R2 + 1/R3 "Remember what we stated at the beginning of this section before we begin the calculations: "A parallel circuit's total resistance is not equal to the sum of its resistors (like in a series circuit). The current through R2 is V2/R2 because R2 appears to be grounded (to source V2), and the current through R3 is V3/R3 because R3 appears to be grounded.The voltage drop in RF, and consequently the output voltage, are equal to (Iin + V2/R2 V3/R3)RF, much like for current sources.Diagram 30-11. The electric potential difference (V) across each resistor in a parallel circuit is the same.Ohm's law states that I = V / R applies to the current in a resistor.The current will be lowest where the resistance is highest since the V is the same for each resistor.To learn more about resistances refer
https://brainly.com/question/28135236
#SPJ1
What does efficiency measure?
Answers
Answer:
Efficiency is defined as any performance that uses the fewest number of inputs to produce the greatest number of outputs. Simply put, you're efficient if you get more out of less.
Explanation:
Has to be written in C# in Console Window! Design an inheritance hierarchy to include classes for Student, GraduateStudent, and UnderGraduate and show it in the form of UML diagram. Name your own members for each class. For example, GraduateStudent may include a data member for the type of undergraduate degree awarded, such as B.A. or B.S., and the location of the institution that awarded the degree. UnderGraduate may include classification (freshman, sophomore). Implement your design in C#, and write a driver program to test it. UML is needed
Answers
Here's the UML diagram for the inheritance hierarchy:
The UML diagram_________________
| Student |
|_______________|
| - name |
| - age |
|_______________|
|
|
_______V_______
| GraduateStudent |
|_______________|
| - undergraduateDegreeType |
| - institutionLocation |
|__________________________|
|
|
_______V_______
| UnderGraduate |
|_______________|
| - classification |
|_____________________|
In C#, you can implement this hierarchy as follows:class Student
{
protected string name;
protected int age;
// constructor, properties, and methods
}
class GraduateStudent : Student
{
private string undergraduateDegreeType;
private string institutionLocation;
// constructor, properties, and methods
}
class UnderGraduate : Student
{
private string classification;
// constructor, properties, and methods
}
class Program
{
static void Main(string[] args)
{
// create instances of Student, GraduateStudent, and UnderGraduate
// test their properties and methods
}
}
This is a basic implementation, and you can add additional members and methods as per your requirements.
Read more about UML diagrams here:
https://brainly.com/question/13838828
#SPJ4
Which of the following is NOT a factor that contributes to the annual cost to own an automobile
a
vehicle color
b
repairs
c
fuel
d
maintenance
Answers
Answer:
a. vehicle color
Explanation:
One might expect that the cost of owning a vehicle would not be a function of its color. There is no reason to believe that a blue car gets better gas mileage than a green car of the same make, model, and equipment. So, the appropriate choice is ...
a. vehicle color
__
However, vehicle color may play a role in ownership costs if more money is spent on washing a white car than would be spent on a black or beige car. Similarly, a light-colored car may require less use of an air-conditioner in the summer sun than does a dark-colored car, ultimately affecting fuel cost. It isn't always obvious what the features of a vehicle are that contribute to ownership cost.
which of the following are valid sorting orders you can choose when adding sorting levels to your data? select all that apply.
Answers
Z to Ac, Oldest to Newest and Smallest to Largest are valid sorting orders/algorithm you can choose when adding sorting levels to your data.
What are Sorting orders?
Sorting orders refer to the ways in which a set of data can be arranged in a specific order. The most common sorting orders are ascending and descending.
Ascending order arranges data from smallest to largest, while descending order arranges data from largest to smallest. For example, if you have a list of numbers 5, 3, 9, 1, 6, sorting them in ascending order would result in 1, 3, 5, 6, 9, while sorting them in descending order would result in 9, 6, 5, 3, 1.
Other less common sorting orders include alphabetical order, chronological order, and random order.
To learn more about sorting orders/algorithm, visit: https://brainly.com/question/15119370
#SPJ1
The anteroposterior ground reaction force could be used to a estimate body mass b estimate jump height c estimate breaking impulse d estimate landing loading rate
Answers
Correct option is d.estimate landing loading rate.The anteroposterior ground reaction force could be used to estimate landing loading rate.
The anteroposterior ground reaction force is a measure of the force exerted by the body on the ground during movement. It represents the component of the force that acts in the forward-backward direction. By analyzing the anteroposterior ground reaction force, it is possible to estimate the landing loading rate, which refers to the rate at which force is applied to the body upon landing.
During activities such as jumping, the landing loading rate is an important parameter to consider as it can affect the risk of injury. A higher landing loading rate indicates a rapid increase in force upon landing, which may result in greater stress on the joints and tissues of the body.
Conversely, a lower landing loading rate suggests a more gradual increase in force, which can be less detrimental to the body.
By using the anteroposterior ground reaction force, researchers and practitioners can assess the landing loading rate and make informed decisions regarding training, rehabilitation, and injury prevention strategies.
Monitoring and analyzing this parameter can help identify individuals who may be at a higher risk of injury due to excessive loading rates and enable the implementation of targeted interventions to reduce injury risk.
Learn more about ground reaction force
brainly.com/question/30136439
#SPJ11
Given a 2.5-hr unit hydrograph with a peak discharge of 100 m3/s, what would be the peak discharge for a 2.5-hr storm with 2.5 cm of runoff?
Answers
To solve this problem, we can use the following formula:
Peak discharge = (Rainfall depth) x (Unit hydrograph peak discharge)
First, we need to convert the rainfall depth from centimeters to meters:
2.5 cm = 0.025 m
Next, we can use the given unit hydrograph peak discharge of 100 m3/s and substitute it into the formula along with the rainfall depth of 0.025 m:
Peak discharge = (0.025 m) x (100 m3/s)
Peak discharge = 2.5 m3/s
Therefore, the peak discharge for a 2.5-hr storm with 2.5 cm of runoff would be 2.5 m3/s.
Anyone got a pc that can run 240 fps? Around like 1,300 dollars that can run 240 fps on fortnite whoever answers and gives me a good pc I will give brainliest
Answers
Answer:
What do u need it for just gaming or for streaming and other things