What type of engineer develops and tests catalytic converters for automobile engines?

agricultural
mechanical
civil
electrical

Answer:

The Designed World

Science not only explains the natural world, but the world we've designed around us as well. Science's goal is to explain everything, after all.

The natural world includes plants and animals, soil, rocks, water, and air. Things can be described, compared, and classified on the basis of their characteristics. Nature includes living and nonliving things. Living things need food, water, air, and shelter, and can move, grow, and reproduce.

Explanation:

Before replacing or adding manual transmission/transaxle fluid, service information should be examined because it may also be engine oil, gear lubricant, or ATF (automatic transmission fluid).

Whether the car has an automatic or manual transmission, as well as whether you're testing the fluid whether it's hot or cold, all affect how you check the transmission fluid. The procedure is as follows: To follow the procedure, you may also watch this video.

Examine the drained transmission fluid for any gold-colored particles. Without enough gear oil, a manual transmission will wear out very fast and will need to be rebuilt or replaced.

To know more about ATF visit :-

https://brainly.com/question/27987306

#SPJ1

Answer:

I think

when the problem has numerous possible options.

If wrong correct me pls

Have a great day

I hope it helps

\(#Liliflim\)

Answer:

(i think)

Answer:

The line voltage of the three phase network is 346.41 V

Explanation:

Star Connected Load

Resistance, R₁ = R₂ = R₃ = 18 Ω

For a star connected load, the line current = the phase current, that is we have

\(I_L = 25 \, A = I_{Ph}\)

Whereby the the voltage across each resistance = \(V_R\) is given by the relation;

\(V_R\) = \(I_{Ph}\) × R

Hence;

\(V_{Ph}\) = \(V_R\) = \(I_{Ph}\) × R  = 25 × 8 = 200 V

Therefore we have;

The line voltage, \(V_{L}\) = √3 × \(V_{Ph}\) = √3 × 200 = 346.41 V.

Hence, the line voltage of the three phase network = 346.41 V.

Answer:

1. inspection is the activity of examining the product or its components to determine if they meet the design standards, testing is a procedure in which the item is observed during operation in order to determine whether it functions properly for a reasonable period of time.

Explanation:

a process that converts raw materials into a useful product.

Answer:

B. A process that mass-produces complex products :)

Answer:

innovation is a series of refinements...

Answer:

Streamlinining matters

Explanation:

If the paper aeroplane is sharp pointed the distance will be far and swift.

Answer:

Percent of not tart cherries = 21%

Explanation:

Given:

Production of cherry tart = 79

Find:

Percent of tart cherries

Percent of not tart cherries

Computation:

Percent of tart cherries = Production of cherry tart[100% / 100]

Percent of tart cherries = 79[100% / 100]

Percent of tart cherries = 79%

Percent of not tart cherries = 100% - Percent of tart cherries

Percent of not tart cherries = 100% - 79%

Percent of not tart cherries = 21%

Answer:

rubber tires prevents the flow of electricity bc rubber is not a conductor

Answer:

D) it is the most common vehicle construction material.

A) it is a ferrous metal is true, Steel is a ferrous metal, which means it contains iron.

B) heat tends to strengthen high strength steel is true, heat treatment is often used to strengthen high strength steel.

C) Boron alloyed steel is exceptionally hard is also true, Boron alloyed steel is known for its exceptional hardness.

D) it is the most common vehicle construction material is False. Aluminium is also widely used in vehicle construction, especially in recent years because of its weight-saving properties.

Answer:

just the way u did rn

Explanation:

lol

The scope of BS computer science in Pakistan is quite vast

try this :)

The idea that the three pyramids of Giza are the greatest feat of engineering ever is widely accepted among historians and experts.

These majestic structures, built over 4,500 years ago, continue to amaze and baffle people today. Here's why:
1. Monumental size: The pyramids of Giza are colossal structures, with the largest, the Great Pyramid of Khufu, standing at over 450 feet tall.

Constructing such massive structures without modern machinery or technology is a remarkable achievement.
2. Precision and alignment: The pyramids were meticulously built with incredible precision. The sides of the pyramids align almost perfectly with the cardinal points of the compass.

The accuracy of the alignment is a testament to the advanced astronomical knowledge possessed by the ancient Egyptians.
3. Construction techniques: The pyramids were built using immense blocks of limestone, weighing several tons each. The precise cutting and fitting of these massive blocks required advanced engineering skills.

The construction techniques used, such as ramps and pulleys, demonstrate the innovative methods employed by ancient Egyptian engineers.
4. Longevity: Despite being thousands of years old, the pyramids have stood the test of time. They have survived earthquakes, erosion, and countless other natural and human-induced threats.

The durability of the pyramids is a testament to the engineering prowess of the ancient Egyptians.
For more questions on pyramids of Giza

https://brainly.com/question/27592197

#SPJ8

Answer:

C

Explanation:

I literally had this question yesterday

Answer:

the capability of weight and lifts

Answer:

True

Explanation:

Answer:

The correct answer is C. Perspective Projection

Explanation:

Trust Me

Answer:

Planning is the process of thinking about the activities required to achieve a desired goal. ... It is the first and foremost activity to achieve desired results. It involves the creation and maintenance of a plan, such as psychological aspects that require conceptual skills.

To complete the tables, substitute the given input values of x into the equation y = 2x - 10 and calculate the corresponding values of y.

To complete the tables for the equation y = 2x - 10, follow these steps:

Start with the given input values of x: 1, 2, 3, 4, and 5.

Substitute each value of x into the equation y = 2x - 10.

Perform the calculations to find the corresponding values of y for each x value.

For x = 1: y = 2(1) - 10 = -8

For x = 2: y = 2(2) - 10 = -6

For x = 3: y = 2(3) - 10 = -4

For x = 4: y = 2(4) - 10 = -2

For x = 5: y = 2(5) - 10 = 0

Fill in the calculated values of y in the respective "y" column for each x value in tables 1.1 and 1.2.

Table 1.1:

x y

1 -8

2 -6

3 -4

4 -2

5 0

Table 1.2:

x y

1 -8

5 0

By substituting the given x values into the equation and calculating the corresponding y values, you can complete the tables accurately. Remember to include your calculations on a separate sheet and attach it to your portfolio for documentation.

For more such question on Equation

https://brainly.com/question/29174899

#SPJ8

IT can cause tires to overheat, which can lead to premature wear, tread separation and blowouts

Answer:

less efficiency and poor gas mileage

Explanation:

Explanation:

suspension is the answer

Answer:

D

Explanation:

explanation: it probably went from the bottom of your car and went through some leaked pipes and went to the Vehicle compartment.

Correct form without using any exponent is :

a) 12300 NMK/gk

b) 109.433 Cs/mK

c) 0.000433 Ws/(cube meter)K

What is Exponent?

The way of representing huge numbers in terms of powers is known as an exponent. Exponent, then, is the number of times a number has been multiplied by itself. For instance, the number 6 is multiplied by itself four times, yielding 6x6x6x6. You can write this as 6^4. In this case, the exponent is 4 and the base is 6.

What is BODMASS?

The acronym BODMAS was created to aid kids in remembering the right order to carry out mathematical operations when solving problems. B-Brackets, O-Orders (powers/indices or roots), D-Division, M-Multiplication, A-Addition, and S-Subtraction are all abbreviated as Bodmas.

Learn more about Exponent click here :

https://brainly.com/question/23275698

#SPJ1

Explanation:

The sum of the length of RS and ST is the length of RT, i.e.

\(\overline{RS}+\overline{ST}=\overline{RT}\)

\((3x-8)+x=2x\)

\(4x-8=2x\)

\(4x-2x=8\)

\(2x=8\)

\(x=4\)

\(\therefore \overline{ST}=4\)

Answer: The Answer is 4, just had this question

Explanation:

To use the k-means algorithm for prediction on the Iris dataset, follow the steps of reading the data, separating the features and target, building the model, and making predictions using the last row of data

To use the k-means algorithm to make a prediction over the Iris dataset, you can follow these steps:

1. Read the json formatted data: You can use a JSON library in your programming language to read the iris dataset from the provided JSON file. For example, in Python, you can use the `json` module to load the data from the file.

2. Separate the entire data and the last row: Once you have loaded the data, you need to separate the feature matrix (sepal length, sepal width, petal length, and petal width) from the target vector (the correct membership to which cluster each row belongs). You can do this by excluding the last column from the feature matrix and storing it separately.

3. Build the model: Next, you need to build the k-means model. There are multiple ways to do this, and you can choose to implement it yourself or use a library like scikit-learn (sk-learn) in Python. If you decide to use sk-learn, you can import the `KMeans` class from the `sklearn.cluster` module and instantiate an object of this class. You can then fit the model using the feature matrix (excluding the last column) to train it.

4. Make a prediction using the last row of data: Finally, you can use the trained model to make a prediction on the last row of data. You can pass this row to the `predict` method of the k-means model, and it will return the predicted cluster for that row.

Remember that different models may be more suitable for different situations. The k-means algorithm is commonly used for clustering tasks, where the goal is to group similar data points together. By following these steps, you can run the code and build the k-means model to practice implementing the theory you learned in class.

Learn more about k-means algorithm: brainly.com/question/29643588

#SPJ11

Biomedical engineers may need to dilute solutions for several reasons. One common reason is to adjust the concentration of a particular substance to a desired level for experimental or clinical purposes.

Dilution allows for precise control over the concentration of a solution, enabling researchers or healthcare professionals to study the effects of different concentrations of substances on biological systems.

In biomedical engineering, dilution is often employed when working with drugs or therapeutic agents. By diluting a concentrated drug solution, engineers can create different dosages suitable for specific applications. This is crucial for ensuring patient safety and achieving desired therapeutic outcomes.

Additionally, dilution is necessary for calibration and quality control purposes in biomedical engineering. Diluting stock solutions of known concentrations can generate a range of standard solutions used to calibrate instruments, verify measurement techniques, or assess the accuracy of analytical methods.

Dilution plays a critical role in ensuring accurate and reliable data collection, analysis, and experimentation within the field of biomedical engineering.

In summary, dilution is an essential technique for biomedical engineers as it allows them to control the concentration of substances, customize drug dosages, and maintain accuracy in calibration and quality control processes, all of which are vital for research, development, and healthcare applications.

For more questions on Biomedical engineers , click on:

https://brainly.com/question/30235387

#SPJ8