what is the tennison gambit intercontinental ballistic missile variation

This word rhebajbje is not a word according to me and the internet if you search "Define rhebajbje".

The part of an overall project that a construction manager is responsible

for is: B. mineral resources.

A construction manager can be defined as an individual (professional) who has acquired the requisite skills and training to plan, design, develop and construction of a project, from start to finish.

This ultimately implies that, a construction manager is saddled with the responsibility of providing and overseeing the use of mineral resources during the construction of a project while a HR manager is responsible

for personnel resources.

Read more on project team here: https://brainly.com/question/26069874

#SPJ2

To determine whether the owner of MyBNB met her goal of generating a net profit margin of at least 10 percent as of November 30, we need to calculate the net profit margin using the financial statements prepared in requirement 1.

The formula for net profit margin is net income divided by total revenue, expressed as a percentage. From the income statement provided in requirement 1, we can see that the net income for the year ended November 30 is $78,000. From the same statement, we can also see that the total revenue for the year is $600,000.Using these figures, we can calculate the net profit margin as follows:Net profit margin = (Net income / Total revenue) x 100%Net profit margin = ($78,000 / $600,000) x 100%Net profit margin = 13%Therefore, based on the financial statements prepared in requirement 1, the owner of MyBNB exceeded her goal of generating a net profit margin of at least 10 percent as of November 30. The company's net profit margin for the year was 13%, indicating that the company was able to generate a healthy profit relative to its revenue.

To learn more about MyBNB click the link below:

brainly.com/question/30705733

#SPJ4

Answer:

Aerobic biological treatment process

Explanation:

Aerobic biological treatment process in which micro-organisms, in the presence of oxygen, metabolize organic waste matter in the water, thereby producing more micro-organisms and inorganic waste matter like CO₂, NH₃ and H₂O.

Energy transfer is factor that affects unit operation this is because each processing of change requires energy transfer.

Unit operations involves reactions that lead to physical change or chemical transformation.

It include separating of mixtures which can be done by filtering, crystallization and polymerization.

Unit operation often results into changes that can be seen or visible changes.

Energy transfer is one the factors that affect unit operation.

Therefore, Energy transfer is factor that affects unit operation this is because each processing of change requires energy transfer.

Learn more on unit operation below

https://brainly.com/question/13098755

#SPJ1

Answer:

A.) 1mv = 2000N

B.) Impulse = 60Ns

C.) Acceleration = 66.67 m/s^2

Velocity = 4 m/s

Displacement = 0.075 metre

Absorbed energy = 60 J

Explanation:

A.) Using a mathematical linear equation,

Y = MX + C

Where M = (2000 - 0)/( 898 - 0 )

M = 2000/898

M = 2.23

Let Y = 2000 and X = 898

2000 = 2.23(898) + C

2000 = 2000 + C

C = 0

We can therefore conclude that

1 mV = 2000N

B.) Impulse is the product of force and time.

Also, impulse = momentum

Given that

Mass M = 30kg

Velocity V = 2 m/s

Impulse = M × V = momentum

Impulse = 30 × 2 = 60 Ns

C.) Force = mass × acceleration

F = ma

Substitute force and mass into the formula

2000 = 30a

Make a the subject of formula

a = 2000/30

acceleration a = 66.67 m/s^2

Since impulse = 60 Ns

From Newton 2nd law,

Force = rate of change in momentum

Where

change in momentum = -MV - (- MU)

Impulse = -MV + MU

Where U = initial velocity

60 = -60 + MU

30U = 120

U = 120/30

U = 4 m/s

Force = 2000N

Impulse = Ft

Substitute force and impulse to get time

60 = 2000t

t = 60/2000

t = 0.03 second

Using third equation of motion

V^2 = U^2 + 2as

Where S = displacement

4^2 = 2^2 + 2 × 66.67S

16 = 4 + 133.4S

133.4S = 10

S = 10/133.4

S = 0.075 metre

D.) Energy = 1/2 mV^2

Energy = 0.5 × 30 × 2^2

Energy = 15 × 4 = 60J

Answer:

  SPL is best represented using a logarithmic scale

Explanation:

Microbars would be a linear scale. deciBels is a logarithmic scale, so is able to express a wide range of sound pressures more easily.

Since human activity will have had the least impact on the water at the river's highest point, it should be the cleanest. The two cities are upstream.

What does the game term "farm" mean?

In order to obtain experience, points, or some kind of in-game cash, a player, or someone hired by a player, engages in repetitive behaviors. This practice is known as farming. Staying in a game region with a spawn point that continually produces new objects or adversaries is the norm for farming.

What is a "farm beat"?

FarmBeats continuously monitors moisture and soil data. In order to capture soil temperature and moisture levels and follow them using cloud-based computing models, Microsoft developed the new agriculture research project FarmBeats. It uses solar-powered white space-based Internet connectivity.

To know more about Farm land visit;

https://brainly.com/question/28983064

#SPJ4

Technician A says that a scan tool is commonly used to pinpoint electronically controlled transmission noise issues. Technician B says that the PCM/TCM controls gear selection on an electronically controlled transmission. Both technicians are correct.

A technician is a person that is expert of technical instruments. He has the knowledge to repair technical issues.

Both Technicians are correct because the one is talking about scan tool which is correct and PCM/TCM are used in gears related to vehicles.

Thus, Technician A and Technician B are correct.

Learn more about technician

https://brainly.com/question/14290207

#SPJ1

The answer of the given question based on the Uber application startup

growing rapidly the answer is given below,

Uber's business model is based on a sharing economy concept, which uses a smartphone application to connect riders with drivers.

Uber is a ride-arranging service that uses a smartphone application to connect riders with drivers. The company's business model is based on a sharing economy concept, which allows people to share resources and services with each other through online platforms. The Uber business model is considered a threat to traditional transportation companies and employees because it provides an alternative to traditional taxi and transportation services, which are often more expensive and less efficient.

One of the main reasons why traditional transportation providers see Uber as a threat is that it allows anyone with a car to become a driver, which creates more competition for the traditional taxi industry. Uber's model also provides riders with a convenient and flexible transportation option, which is often more affordable than traditional taxi services.

To address the Uber threat, traditional transportation providers could consider implementing similar sharing economy concepts in their own business models. For example, they could develop their own smartphone applications that connect riders with drivers, or offer car-sharing services to customers. They could also consider lowering their prices and improving their services to compete with Uber.

Another approach for traditional transportation providers would be to work with Uber and other ride-sharing companies to find a mutually beneficial solution. For example, they could partner with Uber to offer combined services that provide customers with a wider range of transportation options. They could also work together to develop regulations and policies that ensure fair competition and protect the interests of all stakeholders involved.

Overall, traditional transportation providers will need to adapt to the changing transportation landscape and find new ways to remain competitive in the face of growing competition from ride-sharing companies like Uber.

To know more about Threat visit:

https://brainly.com/question/30369923

#SPJ1

On the print you would expect the pitch diameter of the gear to be 9.00 inches. Option A is right.

Gear ratio = 1/3

This is solved as number of teeth on pinion / teeth on gear

= Np/Ng

The pitch diameter = 1.5 x 2

= 3

Diametral pitch = 12

NP = 3 x 12 = 36

This is the teeth on piston

Ng = 3NP

Ng = 3 * 36

= 108

Hence pitch diameter = 108/12 = 9

Read more on pitch diameter here:

https://brainly.com/question/13039932

#SPJ1

The values of h at the two internal boundaries are :

Given data :

Z₁ = Z₂ = Z₃ = 25 m

h top = 120 m

h bottom = 100 m

K₁ = 0.0001 m/s

K₂ = 0.0005 m/s

K₃ = 0.0010 m/s

we will apply the formula below since flow is perpendicular to the bedding plane

Keq = \(\frac{Z1 + Z2 + Z3 }{\frac{Z1}{K1}+\frac{Z2}{K2} + \frac{Z3}{K3} }\)  ----- ( 1 )

Insert values given above into equation 1

Therefore ; Keq = 2.307 * 10⁻⁴ m/s

Hydraulic gradient ( Ieq ) = head loss / length

                                          = ( 120 - 100 ) / 3 * 25

                                   Ieq  = 0.266

Given that the flow is perpendicular to bedding plane

q1 = q2 = q3

V₁ = V₂ = V₃ = V

K₁i₁ = K₂i₂ = K₃i₃ = Keq * ieq

Hence :

V = Keq* Ieq

   = 2.307 * 10⁻⁴ * 0.266

   = 6.15 * 10⁻⁵ m/s .

Also;

K₁i₁ =  Keq * ieq = K₂i₂ = K₃i₃

therefore :

  i₁ = 0.615

  i₂ =  0.123

  i₃ = 0.0615

Pressure at point 1 ( i.e. pressure between first two formations )

h₁ = h top - i₁L₁

   = 120 - 0.615 * 25

   = 104.625 m

Pressure at point 2 ( i.e. pressure between the 2nd and 3rd formation )

h₂ = h₁ - i₂L₂

    = 104.625 - 0.123 * 25

    = 101.55 m

Therefore we can conclude that The values of h at the two internal boundaries are :  h₁ = 104.625 m , h₂ = 101.55 m

Learn more about boundary calculations : https://brainly.com/question/1287095

The total wall area that needs to be insulated is -29 ft².

The negative value indicates that the area of the window and door openings exceeds the total wall area, which seems unlikely. It's important to note that the given dimensions or calculations might contain errors or inconsistencies. Double-checking the measurements or obtaining accurate dimensions will be necessary to provide a valid answer.

To determine the total wall area that needs to be insulated, we first need to calculate the area of the window and door openings and subtract it from the total wall area.

The dimensions of the window and door openings are not provided, but we know that their combined area is approximately 125 ft². Let's assume that the window and door openings are rectangular in shape.

Let's calculate the area of the window and door openings:

Area = Length × Width

Given that the combined area is 125 ft², we can assume:

Area of window and door openings = 125 ft²

Now, let's calculate the total wall area that needs to be insulated:

Total wall area = Wall area - Area of window and door openings

To calculate the wall area, we need to find the perimeter of the home and multiply it by the height of the walls. Assuming the home is rectangular:

Perimeter = 2 × (Length + Width)

Total wall area = Perimeter × Height

Let's substitute the given dimensions into the equations:

Perimeter = 2 × (42" + 30") = 144 inches

Total wall area = (144 inches × 8 feet) / 12 = 96 ft²

Finally, we can calculate the total wall area that needs to be insulated:

Total wall area = 96 ft² - 125 ft² = -29 ft²

The negative value indicates that the area of the window and door openings exceeds the total wall area, which seems unlikely. It's important to note that the given dimensions or calculations might contain errors or inconsistencies. Double-checking the measurements or obtaining accurate dimensions will be necessary to provide a valid answer.

For more such questions on area, click on:

https://brainly.com/question/25292087

#SPJ8

Answer:

it's not included

Explanation:

plz exact ur explain

Answer:

si amor

Explanation:

Hoiykñjdnlklbutrk

Technicians A is correct in the given scenario. The correct option is C.

Exhaust gas is a byproduct of combustion that exits the tailpipe of an internal combustion engine.

It consists of a gas mixture that includes carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxides (NOx), hydrocarbons (HC), and particulate matter (PM).

Technician B is mistaken. CO2 levels in the exhaust should be less than 15%, preferably between 13% and 14.5% for petrol engines and 11% to 13% for diesel engines.

High CO2 levels can actually indicate inefficient engine operation, as it means that not all of the fuel in the engine is being burned and is being wasted as exhaust.

Thus, C is the correct answer. A technician is correct.

For more details regarding exhaust gas, visit:

https://brainly.com/question/11779787

#SPJ2

Answer:

Computer programming is where you learn and see how computers work. People do this for a living as a job, if you get really good at it you will soon be able to program/ create a computer.

Explanation:

Hope dis helps! :)

Answer:

Do not use I me my we. Less exclamation points, bigger words like "Pompous" Lots of uptight language, as if you are at an interview. structure should be precise and sharp, sharper than Angelina Jolie's cheekbones

Explanation:

Answer:

Trade association.

Explanation:

I'm thinking it is as it represents contractors who design, install, inspect and maintain amongst other activities electrical and electronic equipments or service.

Answer:

newspaper, radio, televison

Explanation:

had avid in 7th :)

Answer:

1. will help for colcollares.

2. gives you money for studies

3. helps you choose the perfect collage

Moment of Inertia is the measure of a structure's resistance to rotation. It is the integral sum of an element's mass and its distance from the axis of rotation.

A moment of inertia can be changed by adjusting the shape of a structure to change the distance of mass from the axis of rotation. A structure's moment of inertia is proportional to the stress due to bending.

A structure with a higher moment of inertia will have a lower stress due to bending than a structure with a lower moment of inertia. A beam's moment of inertia is dependent on its shape.

Rectangular, circular, or I-beam shapes are popular for their ability to handle bending stress. Wider beam shapes distribute bending stress more evenly over the beam's cross-sectional area, resulting in a lower bending stress.

I-beams are designed with a high moment of inertia to resist bending, making them a popular choice for construction. A higher moment of inertia ensures a stronger beam that can better resist bending stress.

Learn more about Moment of Inertia here https://brainly.com/question/30051108

#SPJ11

Answer:

a) 600°F  days

b) 103°F  days

Explanation:

Given data :

overall heat loss coefficient = 400 Btu/h.oF

Furnace efficiency = 0.78

applying the degree- day method the heating energy requirement per day can be obtained by subtracting the average temperature for a particular day from the acceptable mid/balance point temperature

lets assume the mid/balance point temperature = 65°F

a) heating energy requirement in Denver Colorado

 we will have 600°F days  ; considering the  the average temperature - balance point temperature

= 665 - 65 = 600°F

b) heating energy requirement in Little Rock Arkansas

 we will have 103°  days

Answer:

a) the maximum tensile stress due to the weight of the wire is 1361.23 psi

b) the maximum load P that could be supported at the lower end of the wire is 624.83 lb

Explanation:

Given the data in the question;

Length of wire L = 400 ft = ( 400 × 12 )in = 4800 in

Diameter d = 3/16 in

Unit weight w = 490 pcf

First we determine the area of the wire;

A = π/4 × d²

we substitute

A = π/4 × (3/16)²

A = 0.0276 in²

Next we get the Volume

V = Area × Length of wire

we substitute

V = 0.0276 × 4800

V = 132.48 in³

Weight of the steel wire will be;

W = Unit weight × Volume

we substitute

W = 490 × ( 132.48 / 12³ )

W = 490 × 0.076666

W = 37.57 lb

a) the maximum tensile stress due to the weight of the wire;

σ\(_w\) = W / A

we substitute

σ\(_w\) = 37.57 / 0.0276

= 1361.23 psi

Therefore, the maximum tensile stress due to the weight of the wire is 1361.23 psi

b) the maximum load P that could be supported at the lower end of the wire. Allowable tensile stress is 24,000 psi

Maximum load P that the wire can safely support its lower end will be;

P = ( σ\(_{all\) - σ\(_w\) )A

we substitute

P = ( 24000 - 1361.23  )0.0276

P = 22638.77 × 0.0276

P = 624.83 lb

Therefore, the maximum load P that could be supported at the lower end of the wire is 624.83 lb

Modern water treatment is still considered modern as water treatment processes are constantly evolving and improving to provide better quality water.

Municipal water treatment processes go through multiple stages to ensure safe drinking water. The treatment process typically involves the following components: Coagulation and flocculation: In this stage, chemicals such as alum are added to the water. This causes impurities to clump together and form larger particles, which are then removed through filtration.

Sedimentation: The water is allowed to sit undisturbed to allow the larger particles to settle at the bottom of the tank. Filtration: Water is passed through various filters that remove any remaining impurities, including bacteria, viruses, and chemicals. Disinfection: Chlorine or other disinfectants are added to the water to kill any remaining bacteria or viruses before it is sent to the distribution system.

The potential for disinfectant byproducts to form when disinfectants react with natural organic matter4. The potential for microplastics to enter water sources due to inadequate filtration. It is important to continue to improve and adapt modern water treatment processes to ensure the provision of clean, safe drinking water to communities around the world.

To know more about treatment visit:

https://brainly.com/question/31799002

#SPJ11

The purpose of a dye penetrant is to check for cracks. It is also called dye penetration inspection. The correct option is D).

Surface-breaking faults are frequently found using dye penetrant inspection (DPI). This non-destructive testing approach also cognized as liquid penetrant inspection (LPI), is a practical way to find surface faults that can cause surface discontinuities, such as cracks, porosity, laps, and seams. It is used to check surface cracks and breaking faults.

Therefore, the correct option is D), check for cracks.

To learn more about dye penetrants, refer to the link:

https://brainly.com/question/28481756

#SPJ1

Technician b is correct that he says affirms that the top main bearing shell will always be pierced by a hole.

A housing, shaft, and lubricant are other parts of the system, which also contains a bearing shell. As a result, they must be developed in concert with the bearing shell as a part of a bearing system as the dependability of the bearing shells is dependent on these other components. Their main objective is to make this rotation of the components almost wear-free. Plain bearings consist of one or two bearing shells that are tightly secured within the bearing seat. The spinning shaft is encircled by the bearing shells at the bearing journals. A steel alloy shell serves as the foundation for every bearing insert, upon which the softer bearing componentsis connected. Bearings may currently be divided into two main categories: those made of aluminum alloy or copper/lead alloy.

Learn more about bearing shell here:

https://brainly.com/question/10712687

#SPJ4

Proper training, protective clothing, and safety protocols are essential for preventing accidents in a welding shop.

The key to preventing accidents in a welding shop is to ensure that all workers are properly trained and that appropriate protective equipment and safety protocols are followed. This includes wearing the proper protective clothing, such as fire-resistant clothing, safety glasses, and face shields, as well as ensuring that all welding work areas are properly ventilated. Additionally, there should be clearly marked emergency exits and fire extinguishers in the welding shop, and all employees should be trained in how to use them in case of an emergency.

Learn more about preventing accidents: https://brainly.com/question/11974573

#SPJ4

Answer:

11/8

Explanation:

7/8+4/8=11/8 if you want it on a ruler you need to go online and type fraction to decimal converter and put in 11/8 into a decimal

Zeta = 30/(2*5) = 3 for G(s) = 225/s2 + 30 s + 225 and zeta = 0 for G(s) = 625/s2 + 625.

The Riemann zeta function (s) is a function whose values are also complex and whose argument s can be any complex integer besides 1. It has zeros at the negative even integers, therefore when s is one of 2, 4, or 6, (s) = 0 is true. They're referred to as its trivial zeros.

According to the Riemann hypothesis, the real portion of a complex number must equal 1/2 whenever the Riemann zeta function crosses it (with the exception of zeros between -10 and 0).

To know more about Zeta visit:-

https://brainly.com/question/11634716

#SPJ4