What are the positive and negative affects of altering the DNA of a plant cell?

Order, sensitivity or response to the environment, reproduction, growth and development, regulation, homeostasis, and energy processing.

The percentage of the sulfur (S) in the compound CuSO₄ is 20.1 %.

The percentage of an element in a compound can be determined as the number of parts by mass of that element present in 100 parts by mass of the given compound.

First, calculate the molecular mass of the given compound by the addition of the atomic masses of all the present elements in the molecular formula. Then, the percentage of the elements can be determined by dividing the total mass of the element by the molar mass of the compound multiplied by 100.

Given, the atomic mass of copper, sulfur, and oxygen is 63.55 g, 32.07 g, and 16.0g respectively.

The molecular mass of CuSO₄ =  63.55 + 32.07 + 4(16.0)  = 159.62 g

The mass percentage of the sulphur = (32.07/159.62) × 100 = 20.1 %

Therefore, the mass percentage of the sulfur is equal to 20.1 %.

Learn more about  the mass percentage, here:

brainly.com/question/16750428

#SPJ1

The medicine that has to be given by the nurse to prevent cerebral palsy in the new-born is magnesium sulphate.

The term "cerebral palsy" refers to a collection of conditions that impair mobility and posture development and are thought to be caused by non-progressive abnormalities. Insults that caused cerebral palsy are thought to have happened during foetal development or early childhood. A significant risk factor for cerebral palsy is preterm delivery, and that risk rises sharply as gestational age decreases. Right now, 25% of all new occurrences of cerebral palsy are caused by babies delivered before 34 weeks of pregnancy. Cerebral palsy risk is higher when there are several pregnancies. MgSO4 was infused continuously at a rate of 2 g/h for up to 12 hours after a 6 g loading dose. Given before delivery, magnesium sulphate is known to regulate the vasculature and minimize hypoxia effects by neutralising cytokine or excitatory amino acid damage, which may lower the risk.

To know more about pregnancy visit:

https://brainly.com/question/26430164

#SPJ4

Answer:

The answer is cytoplasm and the nucleus

Explanation:

Answer:

nucleus

Explanation:

1. The reaction mixture with the largest amount of product(s) when at equilibrium is the one with the largest Keq value.

2. The reaction mixture with the largest amount of reactants when at equilibrium is the one with the smallest Keq value

3. The reactions in the table that have concentrations that represent the systems at equilibrium are Reactions 1 and 3.

4. For each reaction that is not at equilibrium, change the concentration of only one of the reactants or products so that the ratio represents the system at equilibrium.

1. In this case, the reaction mixture with the largest Keq value is Reaction 2. This is because the equilibrium constant, Keq, is a measure of the relative concentrations of the products and reactants at equilibrium. A large Keq value indicates that the equilibrium lies far to the right, meaning that there are more products than reactants at equilibrium.

2. The reaction mixture with the largest amount of reactants when at equilibrium is the one with the smallest Keq value. In this case, the reaction mixture with the smallest Keq value is Reaction 4. This is because a small Keq value indicates that the equilibrium lies far to the left, meaning that there are more reactants than products at equilibrium.

3. The reactions in the table that have concentrations that represent the systems at equilibrium are Reactions 1 and 3. This is because the concentrations of the products and reactants in these reactions are equal, which is the definition of equilibrium.

4. For each reaction that is not at equilibrium, change the concentration of only one of the reactants or products so that the ratio represents the system at equilibrium. For example, to bring Reaction 2 to equilibrium, we could increase the concentration of H2O or decrease the concentration of CO2.

Learn more about reaction on

https://brainly.com/question/11231920

#SPJ1

Reaction Keq Concentrations at Equilibrium

1 1000 H2O:CO2 = 1:1

2 10 H2O:CO2 = 10:1

3 0.01 H2O:CO2 = 100:1

4 0.001 H2O:CO2 = 1000:1

On the basis of the Keq values given in the table, which reaction mixture contains the largest amount of product(s) when at equilibrium? Explain.

2. Which reaction mixture contains the largest amount of reactants when at equilibrium?

3. Which reactions in the table have concentrations that represent the systems at equilibrium?

4. For each reaction that is not at equilibrium, change the concentration of only one of the reactants or

products so that the ratio represents the system at equilibrium

Answer:

17.5 L

Explanation:

Step 1: Given data

Step 2: Calculate the final volume of the nitrogen

We have a gas that undergoes a change at a constant temperature. If we assume an ideal behavior, we can calculate the final volume of the nitrogen using  Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1 atm × 14.0 L/0.8 atm = 17.5 L

The answer is 5.25 x 10²³ atoms

Sorry for not showing the work.

You can do the steps and check your answer. I hope this was helpful

The concentration of chloride ions when 2.5 g of FeCl is dissolved in 150 mL of water is approximately 0.54 M.

To determine the concentration of chloride ions when 2.5 g of FeCl is dissolved in 150 mL of water, we need to consider the molar mass of FeCl and perform some calculations.

The molar mass of FeCl is 55.85 g/mol (for iron) + 35.45 g/mol (for chlorine), which gives a total molar mass of 91.3 g/mol for FeCl.

First, we need to calculate the number of moles of FeCl present in 2.5 g of the compound. This can be done using the formula:

moles = mass / molar mass

moles of FeCl = 2.5 g / 91.3 g/mol = 0.027 moles

Next, we convert the volume of water from milliliters (mL) to liters (L):

volume of water = 150 mL = 150/1000 L = 0.15 L

Now, we can calculate the concentration of chloride ions (Cl-) using the formula:

concentration (Cl-) = moles of Cl- / volume of water

Since FeCl dissociates into one Fe3+ ion and three Cl- ions, the number of moles of Cl- is three times the moles of FeCl:

moles of Cl- = 3 * moles of FeCl = 3 * 0.027 moles = 0.081 moles

concentration (Cl-) = 0.081 moles / 0.15 L = 0.54 M.

For more such questions on concentration visit:

https://brainly.com/question/28564792

#SPJ8

Answer:

0.4816 mol S

Explanation:

I'm going to answer this question under the assumption that the question is how many moles of sulfur are present in 34.68 grams of disulfur pentoxide.

The molecular formula of disulfur pentoxide is S₂O₅ (di means two and penta means five).

Now we convert 34.68 g of S₂O₅ into moles, using its molar mass:

Then we convert moles of S₂O₅ into moles of S, given that there are two moles of S per S₂O₅ mol:

Answer: The chemicals that cannot be distilled are called non-volatile solutes. These are substances that do not evaporate at the boiling point of the solvent, which is typically water. Therefore, when a solution containing a non-volatile solute is heated to boil, the solvent evaporates leaving behind the solute. Distillation is not effective at removing non-volatile solutes because the solute remains in the boiling flask and does not evaporate with the solvent and can be condensed back into liquid form.

Explanation:

The escape of the carbon dioxide molecules from the surface. Option 4.

The area where the soda and surrounding air come into contact when the soda bottle is opened rises. The exchange of gases between the soda and the atmosphere is facilitated by the increased surface area.

The molecules of carbon dioxide have a tendency to leave the liquid phase and transition into the gas phase as they come into contact with the air. The action in question is called degassing. The soda's concentration of dissolved carbon dioxide is decreased and its capacity to dissolve further due to the ongoing emission of carbon dioxide.

Learn more about soda:https://brainly.com/question/31889777

#SPJ1

Answer: Or mutations can involve the insertion of additional DNA bases or the deletion of existing DNA bases. Once a mutation occurs, if it changes the function of a resulting protein, a virus or organism is then changed.

Explanation:

Answer:

Or mutations can involve the insertion of additional DNA bases or the deletion of existing DNA bases. Once a mutation occurs, if it changes the function of a resulting protein, a virus or organism is then changed.

Explanation:

Answer:

Yes sirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

Answer:

2NaCN + CaCO3 --> Na2CO3 + Ca(CN)2

Explanation:

Knowing the names gets us: NaCN + CaCO3 --> Na2CO3 + Ca(CN)2

Balance: there are two sodiums and cyanides on the product side so add a 2 to the reactant side.

Answer:

D). She should use a bar graph. The bottom of each bar should be labeled with the category of garbage. The vertical side should have a scale and be labeled "kilograms per year."​

Explanation:

Bar graphs are characterized as the graphic tool which are primarily employed to establish comparison between various groups or to observe the changes occurred over time.

As per the question, the environmental scientist must opt for the 'bar graph' as it will assist her in displaying the data of various categories(paper, yard waste, metals, etc.) through bars on the x-axis while the vertical side or y-axis would show 'kilograms per year' which will display the differences in their amounts. Thus, option D is the correct answer.

It will take the Ne gas approximately 1.2 s to equilibrate between the two sides.

We know that the time taken for a gas to diffuse is dependent on the molar mass of the gas. This is one of the interpretations of Graham's law of diffusion in gases. Thus, Let;

t1 = time taken for Rn to equilibrate = 4.0 s

t2 = time taken for Ne to equilibrate = ?

M1 = molar mass of Rn = 222g/mol

M2 = molar mass of Ne = 20 g/mol

Using

t1/t2 = √M1/M2

4/t2 = √222/20

4/t2 = 3.33

t2 = 4/3.33

t2 = 1.2 seconds

Learn more about diffusion in gases: https://brainly.com/question/879602

Answer:

True

Explanation:

Table sugar and table salt are pure substances....When elements chemically combine, they form compounds that have properties that are similar to those of the uncombined elements.

a) The balanced chemical equation for the reaction is: 2H₂ + O₂ → 2H₂O

b) the number of moles of O₂ required is approximately 1.004 moles.

c)  approximately 45 liters of H₂ and 22.5 liters of O₂ are needed to obtain 45 liters of H₂O.

a) Balancing the chemical equation:

The balanced chemical equation for the reaction is: 2H₂ + O₂ → 2H₂O

b) Calculating the number of moles of the reactants needed to obtain 45 liters of H₂O:

From the balanced equation, we can see that for every 2 moles of H₂O produced, we need 2 moles of H₂ and 1 mole of O₂. Since the stoichiometry is based on moles, we need to convert the given volume of H2O into moles.

To convert volume to moles, we need to use the ideal gas law, PV = nRT. At standard temperature and pressure (STP), the molar volume of an ideal gas is 22.4 liters.

Given that we have 45 liters of H2O, we can calculate the number of moles as follows:

moles of H₂O = (volume of H₂O) / (molar volume at STP)

            = 45 liters / 22.4 liters/mol

            ≈ 2.008 moles of H₂O

Since the stoichiometry of the reaction is 2 moles of H₂O for every 2 moles of H₂, we need an equal number of moles of H₂. Therefore, the number of moles of H₂ required is also approximately 2.008 moles.

For O₂, since the stoichiometry is 1 mole of O₂ for every 2 moles of H₂O, we need half the number of moles of H₂O. Thus, the number of moles of O₂required is approximately 1.004 moles.

c)  the volume of the reactants:

Since the stoichiometry of the balanced equation is 2 moles of H₂for every 1 mole of O₂ and 2 moles of H₂O, we can deduce the volume of the reactants based on their molar volumes at STP.

For 2.008 moles of H₂, the volume can be calculated as follows:

volume of H₂= (moles of H₂) * (molar volume at STP)

            = 2.008 moles * 22.4 liters/mol

            ≈ 45 liters of H₂

For 1.004 moles of O₂, the volume can be calculated similarly:

volume of O₂= (moles of O₂) * (molar volume at STP)

            = 1.004 moles * 22.4 liters/mol

            ≈ 22.5 liters of O₂

Therefore, approximately 45 liters of H₂and 22.5 liters of O₂ are needed to obtain 45 liters of H₂O

for more questions on chemical
https://brainly.com/question/29886197
#SPJ8

The enthalpy change for the reaction \(C2H4(g) + H2(g) → C2H6(g)\) is -137.15 kJ/mol.

Given:C2H4(g) + H2(g) → C2H6(g)The enthalpy of formation of C2H6(g) is -84.68 kJ mol-1The enthalpy of formation of C2H4(g) is 52.47 kJ mol-1The enthalpy of formation of H2(g) is 0 kJ mol-1Hence, using Hess's Law, the enthalpy change for the reaction \(C2H4(g) + H2(g) → C2H6(g)\) can be calculated by considering the formation of reactants and products from their respective elements. It can be given as:

\($$C_2H_4 + H_2 → C_2H_6$$$$\Delta H = H_f(C_2H_6) - [H_f(C_2H_4) + H_f(H_2)]$$$$\Delta H = -84.68 - [52.47 + 0]$$$$\Delta H = -84.68 - 52.47$$$$\Delta H = -137.15 kJ/mol$$.\)

for more such questions on enthalpy

https://brainly.com/question/826577

#SPJ8

Answer:

It is like about a attraction between atoms, molecules, and more.

Explanation:

(1) The nucleus is positive and the electron cloud is positive.

(2) The nucleus is positive and the electron cloud is negative.

(3) The nucleus is negative and the electron cloud is positive.

(4) The nucleus is negative and the electron cloud is negative

If a diprotic acid deprotonates, the resulting species will be a base. Option B is correct.

This is because a diprotic acid has two ionizable hydrogen atoms, and when the first hydrogen ion is released, the resulting species will have a negative charge and can act as a base by accepting a proton from a water molecule or from another acid.

When the second hydrogen ion is released, the resulting species will have an even more negative charge and can also act as a base.

Therefore, after the first deprotonation, the resulting species will be a conjugate base, and after the second deprotonation, the resulting species will be an even stronger conjugate base.

Hence, B. a base is the correct option.

To know more about diprotic acid here

https://brainly.com/question/25645713

#SPJ4

--The given question is incomplete, the complete question is

"If a diprotic acid deprotonates, the resulting species will be: A) an acid B) a base C) both an acid and a base D) depends on the substance."--

Answer: C - Subunit (Monomer) is always a molecule

Explanation: To narrow this down, b, cannot be the answer because it is known that Polymers can extend forever with enough materials present.

It cannot be d) or a) because atoms need to have full bonds, that is, a subunit must be bonded to other units to even be considered a subunit. So it must be c) because a subunit must have full bonds. If you are talking about organic polymers, at the very least, subunits must be bonded with hydrogens, subunits cannot just be carbon atoms, same thing goes with inorganic subunits

Hope this helped and good luck with Chem!

Answer:

Explanation:

From the given information:

The percentage wieght of mixture \(x_w\) = 0.4

The distillate = 70

From equilibrium data in Exercise 7.33

The Feed W = 100

The Liquid residue F = Feed(W) - Distillate (D)

= 100 - 70 = 30

By applying rayleigh equation;

\(In \bigg (\dfrac{F}{W}\bigg)= \int^{xF}_{x_w}\dfrac{1}{y-x} \ dx\)

From the plot of the graph of \(\dfrac{1}{y-x} \ vs \ x\); the area under the curve is being calculated between the point {\(x_1 = 0.4 \ and \ x_2\) }.

Such that; the area \(= In \bigg( \dfrac{100}{30}\bigg)\) = 1.209

Similarly, the value of xF = 0.067

∴

\(y_D = \dfrac{F_{xF} - W_{xW}}{D}\)

\(y_D = \dfrac{30(0.067)-100(0.4)}{70}\)

\(y_D = 0.543\)

Answer:

Explanation:

Two pyruvate molecules remain at the end of glycolysis and are still very rich in energy that can be extracted. Although no ATP is directly produced during pyruvate oxidation, it is the next stage in the process of converting the residual energy into ATP

This process happens in the matrix, the mitochondria's deepest chamber, in eukaryotes. It takes place in the cytoplasm of prokaryotes. Overall, pyruvate oxidation transforms the three-carbon molecule into the two-carbon molecule acetyl CoA CoAstart text, C, o, A, end text, which is attached to Coenzyme A. This results in a NADH NADHstart text, N, A, D, H, end text and the release of one carbon dioxide molecule. In the subsequent step of cellular respiration, acetyl CoA CoAstart text, C, o, A, end text serves as fuel for the citric acid cycle.

Answer: False

Explanation: Eggs are produced during ovulation once a month when someone has a period.

No, Ag₂SO₄ will not precipitate when 100ml of .050M AgNO3 is mixed with 10ml of 5x10-2 m Na₂SO₄ solution because the precipitate is made only in an aqueous solution.

Precipitation is the solid extract that is collect in a place. Precipitate is the concentration of the substance in a solution in a specific place.

Thus, No, Ag₂SO₄ will not precipitate when 100ml of .050M AgNO3 is mixed with 10ml of 5x10-2 m Na₂SO₄ solution because the precipitate is made only in an aqueous solution.

Learn more about precipitation

https://brainly.com/question/18109776

#SPJ1

The correct option is (d) To express very large or very small number.

What is the Scientific Notation?

Scientific notation is a way to present numbers that are too large or too small to be easily written in decimal form. The three components of  scientific notation are coefficient, base and exponent. The proper format to write a scientific notation is a x 10^b, where a is a number or decimal number and b is the power of 10 to make scientific notation equivalent to original number. When a number between 1 and 10 is multiplied by a power of 10 then the number is expressed in scientific notation. For example,  10000000 can be written as 10⁷, which is the scientific notation and the exponent is positive here. Similarly, for the negative exponent 0.000001 can be can be represented as 10-⁷.                             Hence, the scientific notation is used to express very large or very small numbers.

Learn more about Scientific Notation here: https://brainly.com/question/15361382

#SPJ1

B. I think im probly wrong