The trend towards smaller atomic radii as one moves to the right in a period is _____. A) faulty, as atomic radii in a period are nearly uniform in size. B) because of electron pair repulsion causing the expansion of the orbitals. C) wrong. Atomic radii increase across a period left to right as the larger d and p orbitals are occupied after the s orbital. D) due to the effective nuclear charge decreasing. E) due to the effective nuclear charge increasing.

Answer:

your answer for that problem is 34.5

Among the isotopes listed, you would expect the following to be stable: B. 4He, C. carbon-12, and E. 58Ni. These isotopes have balanced numbers of protons and neutrons, resulting in stable nuclei.

Carbon-12 (12C) is the most stable isotope as it has an equal number of protons and neutrons, which results in a very low probability of radioactive decay.

in general, stable isotopes are those which do not undergo radioactive decay. The stability of an isotope depends on the ratio of protons to neutrons in its nucleus. Isotopes with a balanced ratio of protons to neutrons tend to be more stable. Therefore, it is difficult to predict which isotopes would be stable without knowing the specific number of protons and neutrons in each isotope

to know more about protons visit :

https://brainly.com/question/12535409

#SPJ11

Answer:

sorry but dorks dont learn maths

Explanation:

just kidding no offense but i think umm 1st one will stay same

i searched google

Answer:

5.0 x 10^-7

Explanation:

[H+]=10^-6.3

Answer:

E

Explanation:

A combination reaction is one in which two elements or two compounds react to give a new single compound

Hence, what we are expecting on the reactant side is only a single product and not a mixture of products

For the first reaction, we had two elements giving a single product

For the second reaction, we had same

For the third, we had same

For the fourth, we had two compounds reacting to give a singe new product

While in the last, we had two different products which means it does not follow the definition of a combination reaction and that makes it our answer

Answer:

The north atlantic contains the warmest and saltiest water of the major oceans, the southern ocean is the coldest, the north pacific has the lowest average salinity. This density signature is locked into the water parcel when it sinks

Explanation:

i think

Using this formula, we can calculate the confidence interval once we have the sample data, without the sample data, it is not possible to provide an accurate confidence interval estimate.

To construct a 90% confidence interval estimate of the percentage of cell phone users who develop cancer of the brain or nervous system, we would need the sample data, specifically the number of cell phone users and the number of users who developed cancer. Without the sample data, it is not possible to provide an accurate confidence interval estimate.

However, if we assume that we have the necessary sample data, we can proceed with the calculation. The formula for calculating a confidence interval for a proportion is:

Confidence interval

\(=�^±�×�^(1−�^)�Confidence interval= p^​ ±z× np^​ (1− p^​ )​ ​ where:�^p^​\)

 is the sample proportion (number of users with cancer divided by the total number of cell phone users).

\(�\)

z is the z-score corresponding to the desired confidence level (90% confidence level corresponds to a z-score of approximately 1.645).

\(�\)

n is the sample size (total number of cell phone users).

Using this formula, we can calculate the confidence interval once we have the sample data.

Learn more about confidence from below link

https://brainly.com/question/333719

#SPJ11

Answer:

C) Each of the lateral faces has an area of 464 square inches.

Explanation:

Have an actual answer

Answer:

CCCCCCCCCCCCCCCCCCC

Explanation:

Each of the lateral faces has an area of 464 square inches.

Answer:

idc

Explanation:

idc looooooooooool

There are approximately 2.54 × 10^24 molecules in 4.224 mol of acetic acid (C2H4O2).

To determine the number of molecules in 4.224 mol of acetic acid (C2H4O2), we can use Avogadro's number, which is approximately 6.022 × 10^23 molecules/mol.

Number of molecules = Number of moles × Avogadro's number

Number of molecules = 4.224 mol × (6.022 × 10^23 molecules/mol)

Number of molecules = 2.54 × 10^24 molecules

Therefore, there are approximately 2.54 × 10^24 molecules in 4.224 mol of acetic acid (C2H4O2).

learn more about acetic acid here

https://brainly.com/question/15202177

#SPJ11

The formula 4CH₄ represents option C) 4 molecules, each containing a carbon atom and 4 hydrogen atoms. The "4" outside the formula indicates that there are four of these molecules present.

The formula for methane gas is CH₄, which means that a single molecule of methane contains one carbon atom and four hydrogen atoms. When we write 4CH₄, the "4" outside the formula indicates that there are four molecules of CH₄ present. So, there are a total of four carbon atoms and sixteen hydrogen atoms in this scenario, but they are distributed across four molecules of CH₄.

Therefore, option B is incorrect. Option A is also incorrect because there is only one carbon atom in each molecule of CH₄. Option D is incorrect because methane is an organic compound with covalent bonds.

Learn more about methane here:

https://brainly.com/question/31029097

#SPJ11

Luis wood will last the longest compared to spencer as his is dry wood it will burn faster and last longer whereas spencer's wood is fresh and has to dry in order to last longer.

A small piece of wood burns more quickly because when something burns, it combines with oxygen to cause combustion. Smaller pieces of wood burn more quickly than larger ones because they provide more surface area for the flame to spread across.

Smaller-diameter pieces should be divided because doing so increases the amount of wood that is exposed. More surface area means faster drying and better burning of the wood. Smaller (3-inch) pieces should be used whole.

to know more about combustion visit

https://brainly.com/question/15117038

#SPJ4

The model of the molecules on a warm day is option A.

We know that from the kinetic theory of matter, the molecules that compose matter are in constant random motion. The molecules are able to move faster when the temperature has been increased. The implication of this is that the molecules would be more separated and hit each other more freely.

As such, we can see that the molecules can only be at a high temperature and thus separated at the image that have been shown in the option that have been labelled as A.

Learn more about molecules:https://brainly.com/question/19922822

#SPJ1

Matter is anything that has mass and takes up space.

hope this helps <3

The correct ranking of the compounds in decreasing order of boiling points is IV > I > II > III. The correct answer is option (c).

Boiling point is influenced by molecular weight, polarity, and hydrogen bonding. Higher boiling points indicate stronger intermolecular forces between molecules. Comparing the given compounds, the molecule with the strongest intermolecular forces will have the highest boiling point. Therefore, to rank the compounds in decreasing order of boiling points, we need to compare the polarity and hydrogen bonding of each compound.

Compound IV, HOCH2CH2CH2OH, has the highest boiling point because of the presence of two hydroxyl groups that can form hydrogen bonds between molecules.

I, CH3CH2CH2CH2OH, has only one hydroxyl group, but a larger molecular weight than II and III, making it have a higher boiling point.

II, CH3CH2OCH2CH3, is an ether and has a lower boiling point than I and IV due to the absence of a hydroxyl group.

Compound III, CH3OCH3, is nonpolar and cannot form hydrogen bonds, giving it the lowest boiling point among the given compounds.

Therefore, the correct option is (c)

For more such questions on compounds:

https://brainly.com/question/23334479

#SPJ11

This ranking is based on the intermolecular forces present in each compound. Ethylene glycol has the highest boiling point due to strong hydrogen bonding, followed by propanol with hydrogen bonding and dipole-dipole interactions. Acetaldehyde has dipole-dipole interactions, ethyne has weak van der Waals forces, and ethanol has the weakest intermolecular forces among these compounds. Thus, their boiling points decrease in the order given above.

Boiling point is the temperature at which a liquid changes to a gas, and it depends on the intermolecular forces between the molecules. Stronger intermolecular forces lead to a higher boiling point because more energy is required to separate the molecules. In this case, ethylene glycol has the highest boiling point because it has two hydroxyl groups, which can form strong hydrogen bonds with neighboring molecules. Propanol also has hydrogen bonding and dipole-dipole interactions, while acetaldehyde has dipole-dipole interactions. Ethyne has only weak van der Waals forces, and ethanol has the weakest intermolecular forces, which accounts for their lower boiling points.

Learn more about Ethylene glycol here;

https://brainly.com/question/30530800

#SPJ11

Answer:

Iron(3+) sulfide

Explanation:

Answer:

there are used to where large volumes are needed to be transferred and coloured graduated marks make it easier to measure the volumes. the disadvantage isthat they are not so precise and there are greater changes of human error

An ionic bond is formed between a metal ion a nonmetal ion hence Li^+ and Cl^- will form an ionic bond.

An ionic bond is formed between two ions, a metal ion(cation) and a nonmetal ion (anion). The ionic compound is therefore an ion pair because the ions are held together by electrostatic attractions to each other.

Since an ionic bond is formed between a metal ion a nonmetal ion, the following will form an ionic bond;

Learn more: https://brainly.com/question/9743981

Answer:

D: dark cloud

E: elliptical galaxy

F: flare star

The amount of concentrated solution needed is (0.286 M)(65 mL) / C M, and the amount of water needed is 65 mL minus the volume of the concentrated solution.

To calculate the molarity of Kool Aid desired, we need to determine the number of moles of Kool Aid powder and sugar in the package. Since the molecular formula for sugar is C12H22O11, we can calculate its molar mass as follows:

Molar mass of C12H22O11 = (12 * 12.01) + (22 * 1.01) + (11 * 16.00)

= 144.12 + 22.22 + 176.00

= 342.34 g/mol

Given that the package contains 4.25 grams of Kool Aid powder, we can calculate the number of moles of Kool Aid powder using its molar mass:

Number of moles of Kool Aid powder = Mass / Molar mass

= 4.25 g / 342.34 g/mol

≈ 0.0124 mol

Similarly, for the sugar, which has a molar mass of 342.34 g/mol, we can calculate the number of moles of sugar using its mass:

Number of moles of sugar = Mass / Molar mass

= 192.00 g / 342.34 g/mol

≈ 0.5612 mol

Now, to calculate the molarity of the desired Kool Aid solution, we need to determine the volume of water. Given that 1.06 quarts is equal to 1 liter, and we have 2.00 quarts of water, we can convert it to liters as follows:

Volume of water = 2.00 quarts * (1.06 liters / 1 quart)

= 2.12 liters

To find the molarity, we use the formula:

Molarity (M) = Number of moles / Volume (in liters)

Molarity of Kool Aid desired = (0.0124 mol + 0.5612 mol) / 2.12 L

≈ 0.286 M

To prepare 65 mL of the desired molarity, we can use dilution calculations. We need to determine the volume of concentrated solution and the volume of water needed.

Let's assume the concentration of the concentrated Kool Aid solution is C M. Using the dilution formula:

(C1)(V1) = (C2)(V2)where C1 is the initial concentration, V1 is the initial volume, C2 is the final concentration, and V2 is the final volume.

Given that C1 = C M and V1 = V mL, and we want to prepare a final volume of 65 mL (V2 = 65 mL) with a final concentration of 0.286 M (C2 = 0.286 M), we can rearrange the formula to solve for the volume of the concentrated solution:

(C M)(V mL) = (0.286 M)(65 mL)

V mL = (0.286 M)(65 mL) / C M

So, the amount of concentrated solution needed is (0.286 M)(65 mL) / C M, and the amount of water needed is 65 mL minus the volume of the concentrated solution.

For more such questions on concentrated visit:

https://brainly.com/question/28564792

#SPJ8

Answer:  6.022 × 10²³

Explanation:

Avogadro's Number (6.022 × 10²³ atoms/mole) is the number of atoms in any mole of a substance.

Answer:

41.3 °C

Explanation:

From the question given above, the following data were obtained:

Mass (M) of water = 27.56 g

Heat (Q) loss = 2443 J

Final temperature (T2) = 62.5 °C

Initial temperature (T1) =?

NOTE: The specific heat capacity (C) of water is 4.18 J/g°C

Thus, we can obtain the initial temperature of the water by using the following formula:

Q = MC(T2 – T1)

2443 = 27.56 × 4.18 (62.5 – T1)

2443 = 115.2008 (62.5 – T1)

Divide both side by 115.2008

2443 / 115.2008 = (62.5 – T1)

21.20645 = 62.5 – T1

Collect like terms

21.20645 – 62.5 = – T1

– 41.3 = – T1

Divide both side by – 1

– 41.3 /– 1= – T1 / –1

41.3 = T1

T1 = 41.3 °C

Thus, the initial temperature of the water was 41.3 °C

Answer:

S+ F2 ⇒ SF

S=1

F =2

So S +F2 ......... 2SF

2S + F2 ..........2SF this is a balance equation

S=2 F=2 in left side s=2 F = 2 in rightside

Explanation:⇆

⇒

C = Ca

A = 20

B = 42

₁₉⁴²K →   ⁴²₂₀Ca  +  ⁰₋₁e

There is an addition of one electron. The atomic number increases by one.

Positrons or electrons make up beta particles (electrons with positive electric charge, or antielectrons). In a nucleus with an excessive number of protons or neutrons, beta decay happens when one of the protons or neutrons is converted into the other. A neutron degrades into a proton, electron, and antineutrino in beta minus decay. A proton degrades into a neutron, a positron, and a neutrino in beta plus decay.

Learn more about beta decay here:

https://brainly.com/question/23642823

#SPJ2

The speed the object is traveling at, given the time from 4 to 6 seconds as shown in the graph is 2 m/s

From the question given above, the following data were obtained:

The speed of the object at the given time can be obtain as follow:

Speed = change in distance / change in time

Inputting the various parameters, we have:

Speed of object = 4 / 2

Speed of object = 2 m/s

Thus, we can conclude that the speed of the object is at 2 m/s at the given time.

Learn more about speed:

https://brainly.com/question/1861559

#SPJ1

3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.

According to the balanced chemical equation you provided (H2 + Cl2 = 2HCl), one mole of hydrogen gas (H2) reacts with one mole of chlorine gas (Cl2) to produce two moles of hydrogen chloride (HCl). In order to determine how many moles of H2 are required to react with 3.2 moles of Cl2, we can use the stoichiometric coefficients from the balanced equation.
Since the stoichiometric ratio between H2 and Cl2 is 1:1, we can conclude that for every mole of Cl2, one mole of H2 is needed. Therefore, to react with 3.2 moles of Cl2, you would require 3.2 moles of H2.
In summary, 3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.

learn more about chemical

https://brainly.com/question/11850086

#SPJ11