the question is a picture pls help

The mass of 6.45 x 10^25 atoms of Cu is 682.3 grams. For example, the atomic weight of carbon is 12.011, so the molar mass of carbon is 12.011 g/mol.

What is Molar Mass?

Molar mass is the mass of one mole of a substance, expressed in grams per mole (g/mole). It is a fundamental concept in chemistry and is used in various calculations, such as determining the mass of a sample of a substance, the number of moles in a sample, or the number of atoms or molecules in a sample.

The molar mass of an element is equal to its atomic weight, which is the weighted average of the masses of all the isotopes of that element, taking into account their relative abundance.

Determine the number of moles of Cu atoms:

6.45 x 10^25 atoms Cu x (1 mole Cu / 6.022 x 10^23 atoms Cu) = 10.73 mol Cu

Use the molar mass of Cu to convert from moles to grams:

10.73 mole Cu x (63.55 g Cu / 1 mole Cu) = 682.3 g Cu

Therefore, the mass of 6.45 x 10^25 atoms of Cu is 682.3 grams.

Learn more about Molar Mass from given link

https://brainly.com/question/30459969

#SPJ1

As an example option C. A lizard is cold, and it moves to a sunny rock to warm up,  hows an organism that cannot reach homeostasis through internal changes.

Homeostasis is the nation of steady internal, bodily, and chemical conditions maintained via dwelling systems. that is the circumstance of gold standard functioning for the organism and consists of many variables, which include body temperature and fluid balance, being kept inside certain pre-set limits.

Homeostasis is the ability to keep a quite stable internal kingdom that persists regardless of modifications within the world outside. All dwelling organisms, from flora to puppies to human beings, must alter their internal environment to procedure power and ultimately continue to exist.

Homeostasis is maintained by using a series of manipulation mechanisms performed at the organ, tissue, or cell degree. these management mechanisms include substrate supply, activation or inhibition of person enzymes and receptors, synthesis and degradation of enzymes, and compartmentalization.

Learn more about homeostasis here:-https://brainly.com/question/1046675

#SPJ1

solar wind: gives comets their tail

solar flares: a big explosion on the surface of the sun

sunspots:every 11 years there is a peak in the number of them

There was negative cat that lived in our neighborhood who was in love with the positive cat in our house. The neutral cat who shared a room with the positive cat was not bothered at all and did not believe in love.

The sub-atomic particles are the particle which make up thye atom of elements.

The sub-atomic particles are:

The negative cat was living in our neighborhood was in love with the positive cat in our house.

The neutral cat who shared a room with the positive cat was not bothered at all and did not believe in love.

Inconclusion, the sub-atomic particles are the electrons, protons and neutrons.

Learn more about sub-atomic particles at: https://brainly.in/question/48504336

#SPJ1

The standard reaction enthalpy for the given reaction is +235.8 kJ/mol.

The standard reaction enthalpy (ΔH°) for the given reaction is determined as follows:

Equation of reaction: 3 Fe₂O₃ (s) → 2 Fe₃O₄ (s) + ½ O₂ (g)

The standard enthalpy of formation values for Fe₂O₃ (s), Fe₃O₄(s), and O₂(g) is used to calculate the standard reaction enthalpy.

ΔH° = [2 × ΔH°f(Fe₂O₃)] + [½ × ΔH°f(O₂)] - [3 × ΔH°f(Fe₃O₄)]

where;

ΔH°f(Fe₂O₃) = -824.2 kJ/mol

ΔH°f(Fe₃O₄) = -1118.4 kJ/mol

ΔH°f(O₂) = 0 kJ/mol

ΔH° = [2 × (-1118.4 kJ/mol)] + [½ × 0 kJ/mol] - [3 × (-824.2 kJ/mol)]

ΔH° = -2236.8 kJ/mol + 0 kJ/mol + 2472.6 kJ/mol

ΔH° = 235.8 kJ/mol

Learn more about standard reaction enthalpy at: https://brainly.com/question/15174388

#SPJ1

The ways to write a chemical equation for a chemical reaction are:

What is the term chemical reaction?

In a chemical reaction, reactants undergo a chemical reaction and transform into products through a chemical process. For instance, By inhaling oxygen, which then combines with glucose to produce carbon dioxide, water, and energy, we are able to breathe. The response is provided below. C6H12O6 + O2 = 6CO2 + 6H2O + Energy.

Note that Reactants are the substances that are changing and are written on the left-hand side of the equation. Products are the newly produced substances.

Learn more about chemical reaction from

https://brainly.com/question/11231920
#SPJ1

Answer:

0.736

Explanation:

*I am not sure what you mean by "carbon tetrahedral". I'm assuming you are just referring to individual carbon.*

To find the mole percent, you need to (1) convert grams benzene and grams carbon to moles (via their molar masses) and then (2) calculate the mole fraction (via the mole fraction formula).

(Step 1)

Benzene = C₆H₆

Molar Mass (C₆H₆) = 6(12.01 g/mol) + 6(1.008 g/mol)

Molar Mass (C₆H₆) = 78.108 g/mol

70 g C₆H₆          1 mole
---------------  x  ------------------  =  0.896 mole C₆H₆
                         78.108 g

Molar Mass (C) = 12.01 g/mol

30 g C           1 mole
------------  x  -----------------  =  2.50 mole C
                       12.01 g

(Step 2)

                                           moles solute
Mole Fraction  =  ----------------------------------------------
                              moles solute + moles solvent

                                              2.50 mole C
Mole Fraction  =  -------------------------------------------------  =  0.736
                             (0.896 mole C₆H₆ + 2.50 mole C)

The grams of oxygen present in a sample of this compound that contains 56.00 grams of S = 41.9g of oxygen.

The compound contains the following:

Sulphur = 57.20%

Oxygen = 100 - 57.20 = 42.80%

If 57.20% of the sample contains 56g of Sulphur, then 42.80% of the sample will contain X.

Make X the subject of formula,

X = 42.8 × 56/57.20

X= 1712/57.20

X= 41.9g of oxygen

Learn more about chemical compound here:

brainly.com/question/26487468

#SPJ1

Answer:

acidos

Explanation:

los conductores de energía eléctrica: es decir, este tipo de energía fluye con facilidad a través de sus iones. Al reaccionar con metales generan hidrógeno (H) y sal. Al reaccionar con bases o con óxidos metálicas generan agua

The hydrocarbon compound with the formula CH₃ C(CH₃)₂ CH(CH₃) CH₂ CH₂ CH₃ is 2,2-dimethylpentane.

To name a hydrocarbon, identify the longest continuous chain of carbon atoms. In this case, the longest chain has 5 carbon atoms. This tells you that the compound is a pentane.

Next, identify any branches off of the main chain. In this case, there are two branches, each of which has 2 carbon atoms. These are called methyl groups.

Finally, number the carbon atoms in the main chain so that the branches are attached to the lowest possible number. In this case, the carbon atoms are numbered 1, 2, 3, 4, 5, and 6. The branches are attached to carbon atoms 2 and 4.

The name of the compound is then 2,2-dimethylpentane. The "2,2" tells you that the methyl groups are attached to carbon atoms 2 and 2. The "dimethyl" tells you that there are two methyl groups. The "pentane" tells you that there are 5 carbon atoms in the main chain.

Find out more on hydrocarbon compound here: https://brainly.com/question/30363912

#SPJ1

Name - Function

The brain regulates a variety of bodily processes, such as movement, sensation, thinking, emotion, and behavior.

Activity and Part of the brain it involves are:

a. Testing a hamburger - Sensory cortex in the parietal lobe

b. Artistic ability - Right hemisphere of the cerebrum

c. Kicking a soccer ball - Motor cortex in the frontal lobe

d. Rate of breathing - Medulla oblongata in the brainstem

e. Tying your shoes - Cerebellum

Find out more on the brain here: https://brainly.com/question/1247675

#SPJ1

They move freely in all directions statement best describes the atoms of the gas neon. The correct option is B.

Thus, One of the nobles, or the noble gases, is the gas that illuminates Las Vegas. Neon is one of six inert elements that can be found on the Periodic Table's rightmost column.

Noble gases respond very reluctantly because they have little need to exchange electrons with other elements because the outermost electron shell that orbits the nucleus is full.

In the universe, neon is the fourth most common element, according to the Jefferson Laboratory.

According to scientist, neon only makes about 0.0018 percent of the atmosphere on Earth. According to Berkeley Lab, neon is produced in huge mass stars when the star's internal pressure is high enough to fuse carbon atoms into neon atoms.

Thus, They move freely in all directions statement best describes the atoms of the gas neon. The correct option is B.

Learn more about Neon, refer to the link:

https://brainly.com/question/18225650

#SPJ7

a) In the first cell, Al would be oxidized to Al³⁺ and Ag⁺ would be reduced to Ag. In the second cell, Zn would be oxidized to Zn²⁺ and Ni²⁺ would be reduced to Ni. The overall reaction would be Al + 3Ag⁺ + 3Zn²⁺ + Ni²⁺ -> 3Ag + Al³⁺ + 3Zn²⁺ + Ni²⁺. The total potential would be the sum of the individual cell potentials, which can be calculated using the standard reduction potentials of each half-reaction.

b) If the first cell acts as a battery to power the second as an electrolytic cell, then the direction of electron flow is reversed. This means that the Ag and Ni electrodes would be plated, while the Al and Zn electrodes would be oxidized. The total potential would be the same as in part (a), but with a negative sign.

c) The amount of metal plated in a cell is proportional to the amount of charge that passes through the cell. Since the voltaic cell produces a positive potential, it acts as the anode and loses mass. Using the balanced reaction from part (a), we can see that the number of moles of electrons transferred is 3 moles of electrons for every mole of Al that is oxidized. Therefore, the number of moles of Al that is oxidized is 3.70/27 = 0.137 moles. Using the stoichiometry of the reaction, we can see that 0.137 moles of Ni would be plated in the electrolytic cell.

To learn more about electrodes refer to:

brainly.com/question/17060277

#SPJ4

The values of M and L of the solution are given.M = 2.0 M and L of solution = 1.5 L Therefore, mol solute = 2.0 M × 1.5 Lmol solute = 3.0 moles of solute This indicates that "3 moles" of KNO3 must be dissolved in water to make 1.5 liters of a 2.0 M solution.

A mole (mol) is a unit of measurement for the number of molecules in a sample. The volume of solvent in liters (L) that dissolves one mole of solute is known as the Molar Concentration (M). It indicates how many moles of solute are present in one liter of solution. According to this equation,M = mol solute/L of solutionTo calculate the moles of KNO3 in 1.5 L of a 2.0 M solution, we need to use the above equation. Initially, we may rearrange the equation to solve for mol solute.mol solute = M × L of solution

Here, the values of M and L of the solution are given.M = 2.0 M and L of solution = 1.5 L Therefore, mol solute = 2.0 M × 1.5 Lmol solute = 3.0 moles of soluteThis indicates that 3 moles of KNO3 must be dissolved in water to make 1.5 liters of a 2.0 M solution.

For more such questions on mole

https://brainly.com/question/15356425

#SPJ11

Gravity, as a fundamental force of nature, is influenced by several factors. The following are some of the key factors affecting gravity:

The value of the rate constant for the reaction is 0.00107. A rate constant is a proportionality constant that relates the rate of a chemical reaction to the concentrations of the reactants.

The half-life for a zero order reaction can be calculated using the following formula:

t1/2 = [A]0 / 2k

Where t1/2 is the half-life, [A]0 is the initial concentration of A, and k is the rate constant.

We are given the half-life (276 s) and the initial concentration of A (0.591). We can rearrange the formula to solve for the rate constant:

k = [A]0 / 2t1/2

Plug in the given values:

k = 0.591 / (2 × 276)

k = 0.591 / 552

k = 0.00107

Therefore, the value of the rate constant for the reaction is 0.00107.

For more about concentration :

https://brainly.com/question/13872928

#SPJ11

The Executive Office of the President is a set of permanent agencies and is responsible for checking presidential power. lobbying the president on behalf of interest groups. performing defined management tasks for the president. deciding which bills the president will veto. The statement is incorrect.

The Executive Office of the President (EOP) is not responsible for checking presidential power, lobbying the president on behalf of interest groups, or deciding which bills the president will veto.  The EOP is a group of permanent agencies and offices that provide administrative support and policy advice to the president. Its primary function is to assist the president in carrying out their duties and responsibilities effectively. The EOP includes agencies such as the Office of Management and Budget (OMB), the National Security Council (NSC), the Council of Economic Advisers (CEA), and the Office of the United States Trade Representative (USTR), among others. While the EOP plays a crucial role in supporting the president, checking presidential power is primarily the responsibility of the other branches of government, such as Congress and the judiciary. Lobbying the president on behalf of interest groups is typically conducted by external organizations, such as advocacy groups or lobbyists. The decision of which bills the president will veto is ultimately up to the president themselves, guided by their administration's policy priorities and advice from various advisors.

Learn more about  Executive Office of the President here:

https://brainly.com/question/1901445

#SPJ11

Answer:

i think D

Explanation:

Answer:

2Mg + O₂ ​ → 2MgO

Explanation:

Answer:

9

Explanation:

The structure of fluorophore used in the experiments has been drawn in the attachment. And from the drawing counting we can say that there are 9 sp2-hybridized carbon atoms present. Fiuorophores are a fluorescent chemical compound that can re-emit light upon light excitation. Normally used to produce absorbance and emission spectra.

Answer:

I didn't KNOW WHAT IS THE ANSWWR OF YOUR QUISTION IM SO SORRY

Explanation:

I WANT TO INTRODUCE SELF TO YOU CAN I

Mass of the solid conjugate base should the student weigh out to make the buffer solution is  0.083 g.

For a buffer, buffer capacity is the pH range = pKa  1

Here among the given acid list

pKa of phosphoric acid = - log (7.52 x 10-3) = 2.12

pKa of formic acid = - log (1.77 x 10-4) = 3.75

pKa of propionic acid = - log (1.34 x 10-5) = 4.87

pKa of acetic acid = - log (1.75 x 10-5) = 4.75

Now, buffer capacity is the pH range = pKa  1

Here, pH 3 is in the range of buffer capacity of HCOOH.

Therefore, here we can conclude that formic acid (HCOOH) with pKa = 3.75, is the most suitable acid for preparing a buffer of pH 3.

To prepare the buffer with formic acid, the conjugate base that has to be used is sodium formate (HCOONa).

Final volume of the buffer = 100 mL = 0.1 L

[weak acid] = [HCOOH] = 0.1 M

pKa of HCOOH = 3.75

As per the Henderson Hasselbalch equation, pH = pKa + log [salt] / [acid]

Therefore, 3 = 3.75 + log [salt] / 0.1

or, 0.75 = log 0.1 / [salt]

or, 0.1 / [salt] = 5.62

or, [salt] = 0.018 M

Therefore, [HCOONa] = [salt] = 0.018 M

Moles of HCOONa in the buffer solution = 0.018 x 0.1 = 0.0018 moles

Molar mass of formic acid = 46.03 g / mol

Therefore, the mass of sodium formate (HCOONa) that has to be dissolved in the solution to prepare the buffer = 0.0018 x 46.03 = 0.083 g HCOONa

Now initial [HCOOH] provided = 2 M

Moles of HCOOH present in 0.1 L buffer solution = 0.1 x 0.1 = 0.01 moles

Moles of HCOOH present in 0.1 L buffer solution = moles of HCOOH added = 0.01 moles

Therefore, the volume of the provided stock concentration of the solution that had to be added to prepare the buffer = 0.01 / 2 = 0.005 L.

In order to prepare the buffer of pH 3;

Mass of HCOONa to be added = 0.083 g

The volume of 2 M HCOOH to be added = 0.005 L

Formic acid with pKa = 3.75, is the most suitable acid for preparing a buffer of pH 3.

To prepare the buffer with formic acid, the conjugate base that has to be used is sodium formate (HCOONa).

Learn more about buffer capacity here:-https://brainly.com/question/24188850

#SPJ4

If the heat capacity of the bomb calorimeter is 9.96 kj/°c, then the amount of heat released from combustion of 2 g of wood is 39.84 kJ.

To determine the amount of heat released from combustion of 2 g of wood, you need to use the formula

Q = C × ΔT Where:Q is the heat released or absorbed in joules (J)C is the heat capacity of the bomb calorimeter (given as 9.96 kJ/°C)ΔT is the change in temperature in degrees Celsius (°C)We can assume that all the heat released from the combustion of the wood is absorbed by the calorimeter, so we can use the heat capacity of the calorimeter to calculate the heat released. Since the calorimeter absorbs the heat, the value of Q will be negative (i.e. the heat is released).

Given: Mass of wood = 2 g Heat capacity of the bomb calorimeter = 9.96 kJ/°C First, we need to calculate the change in temperature. This can be done by measuring the temperature of the calorimeter before and after combustion. Let's assume that the temperature increases by 4.0 °C.ΔT = 4.0 °C Now, we can calculate the heat released: Q = C × ΔTQ = (9.96 kJ/°C) × (4.0 °C)Q = 39.84 kJ

Therefore, the amount of heat released from combustion of 2 g of wood is 39.84 kJ.

More on combustion: https://brainly.com/question/14614499

#SPJ11

Answer:

g/cm3

Explanation:

(grams, centimeters)

The absorbance of the  214 mm solution of nickel(ii) chloride can be obtained by fitting it into the regression line of the calibration curve.

During measurements of the concentration of a solution using a spectrophotometer, it is conventional to first calibrate the instrument. The calibration is done by measuring the absorbance of various concentrations of the test solution after measuring the absorbance of the sample blank.

After the instrument has been calibrated, the absorbance of any test solution can now be obtained by fitting it into the regression line of the calibration curve.

Learn more about a spectrophotometer:https://brainly.com/question/18801845

Chemical weathering is significant in tropical rainforests as these regions experience heavy rainfall, high humidity, and high temperatures, making these regions more susceptible to chemical weathering.

Rocks become weakened and disintegrate into smaller pieces as a result of weathering, a significant physical phenomena. Physical, chemical, mechanical, and biological modalities can all be used to carry out the process. The ideal illustration of chemical weathering is acid rain.

You have likely observed that no two rocks are exactly alike in appearance. Some appear to have been sculptor-carved. Some have been hollowed out to resemble caves, while others appear to have been painted crimson.

Rocks undergo chemical weathering, or the breakdown of rocks by chemical processes, which is one of the reasons they have such a variety of appearances. You will learn about the various types of chemical weathering and how exposure to substances like water, oxygen, carbon dioxide, and acids can change the minerals found in rocks in this lesson.

We noted that one method rocks are broken down is by chemical weathering. It's crucial to stress that rocks are truly being chemically transformed rather than simply crumbling into smaller rocks because this is the actual chemical change that is occurring. To put it another way, following chemical weathering, we are left with something different from what we started with.

To know more about Chemical weathering click here:

https://brainly.com/question/29616084

#SPJ4

Chemical weathering occurs most rapidly in which of the following climates?

a. Desert

b. Arctic tundra

c. High mountain slopes

d. Tropical rainforest

3. Environmental chemistry

4. Biochemistry

5. Inorganic Chemistry

6. Organic chemistry

Answer:

One mole of oxygen gas, which has the formula O2, has a mass of 32 g and contains 6.02 X 1023 molecules of oxygen but 12.04 X 1023 (2 X 6.02 X 1023) atoms, because each molecule of oxygen contains two oxygen atoms.