the fact that many individuals have their phone out and are browsing the web and texting while watching a sporting event on television is an example of .

Answer:

Explanation:

2.1. The two main materials commonly used to construct a bridge are steel and concrete. Steel is used for constructing the main support structure of the bridge, while concrete is used for the decking and other components.

2.2. Both steel and concrete are considered suitable materials for bridge construction. Steel is known for its strength and durability, while concrete offers good compression strength and can resist harsh environmental conditions. Steel is also flexible and can be used to construct complex shapes and designs, while concrete can be molded into various shapes and sizes. Both materials are widely available and can be sourced easily.

2.3. The safety of a bridge largely depends on the quality of construction and the maintenance of the structure. If constructed properly with high-quality materials, a steel or concrete bridge can be very safe for users. Steel is known for its ability to resist fatigue and can withstand heavy loads, while concrete is fire-resistant and can provide good impact resistance. Proper maintenance, regular inspections, and repairs can help ensure the safety of the bridge over time.

2.4. The cost of materials needed to build a bridge can vary depending on several factors, such as the length of the bridge, the design, and the location. For example, the cost of steel can range from $500 to $1,500 per ton, while the cost of concrete can range from $100 to $150 per cubic yard. Other building materials such as asphalt and timber can also be used for bridge construction, with prices ranging from $100 to $500 per ton or per cubic meter, respectively.

2.5. The cost of labor for bridge construction can also vary depending on the level of skill required and the location. Skilled labor such as engineers and welders can cost anywhere from $50 to $200 per hour, while unskilled labor such as laborers and construction workers can cost from $10 to $30 per hour. Assuming a 40-hour workweek, the total labor cost for skilled labor can range from $8,000 to $32,000 per month, while the total labor cost for unskilled labor can range from $1,600 to $4,800 per month.

Through the Deadlock Prevention Scheme, At least one component must be non sharable in order to guarantee that the hold-and-wait condition never arises in the structure. THE APPROPRIATE Response IS (B).

How do you make sure there is never a deadlock?

The system may employ a deadlock avoidance or prevention strategy to guarantee that deadlocks never happen. A collection of procedures for making sure that at least one of the necessary conditions cannot hold is provided by deadlock prevention. By placing restrictions on resource demands, these techniques avoid deadlocks.

Which of the following does not make a deadlock inevitable?

Consequently, the mutual resolution is not a prerequisite for a deadlock to persist in a technology.

To know more about technology click here

brainly.com/question/9171028

#SPJ4

Answer:

Replace

Explanation:

Since the laptop is already 3 years old and you cant just open laptops it wuld be better to just replace

Answer:

B. Replace

Explanation:

When you been working on the laptop for three years it probably won't work so you'll need to replace the old laptop with a new laptop. But if the laptop still works over that three years you can still replace it if you want.

I hope this helps. <3

Have a nice day.<3

The three relevant tips for individuals using computers at home, work, school, or on their smartphones are ensure regular data backup, practice strong cybersecurity habits, and maintain good ergonomics.

1)Ensure Regular Data Backup: It is crucial to regularly back up important data to prevent loss in case of hardware failure, accidental deletion, or malware attacks.

Utilize external hard drives, cloud storage solutions, or backup software to create redundant copies of essential files.

Automated backup systems can simplify this process and provide peace of mind.

2)Practice Strong Cybersecurity Habits: Protecting personal information and devices from cyber threats is essential.

Use strong, unique passwords for each online account, enable two-factor authentication when available, and regularly update software and operating systems to patch security vulnerabilities.

Be cautious while clicking on email attachments, downloading files, or visiting suspicious websites.

Utilize reputable antivirus and anti-malware software to protect against potential threats.

3)Maintain Good Ergonomics: Spending extended periods in front of a computer or smartphone can strain the body.

Practice good ergonomics by ensuring proper posture, positioning the monitor at eye level, using an ergonomic keyboard and mouse, and taking regular breaks to stretch and rest your eyes.

Adjust chair height, desk setup, and screen brightness to reduce the risk of musculoskeletal problems and eye strain.

For more questions on computers

https://brainly.com/question/24540334

#SPJ8

Answer:

Yes

Explanation:

There are plenty of websites, that includes Amazon, Goodreads, and Barnes & Noble. Some schools may partner with a company like Slingshot books so that they may sell books and merchandise to students in a faster, safer, and more secure manner. If you're in a school it might be worth it to see if there is a site like that.

The shortcut key that we can use on a MacBook to go one row up in the word is Alt + shift + up Arrow.

A keyboard shortcut, sometimes referred to as a hotkey, is a set of one or more keys used in computers to quickly launch a software application or carry out a preprogrammed operation.

A shortcut on the keyboard is a set of keys you may press to carry out a computer instruction. In written writing, it is customary to combine keys that are intended to be struck simultaneously with a +. Ctrl+S, for instance, instructs you to simultaneously hit the Ctrl and S keys. There are several keyboard shortcuts available.

The shortcut key that we can use on a MacBook to go one row up in the word is Alt + shift + up Arrow.

To learn more about Keyboard Shortcuts refer to :

https://brainly.com/question/14403936

#SPJ1

Answer:

b

modem

Explanation:

modem is used to receive signals not transmit

All of the aforementioned are true about in-database processing technology except: D. it is the same as in-memory storage technology.

An in-database processing technology can be defined as a type of database technology that is designed and developed to allow the processing of data to be performed within the database, especially by building an analytic logic into the database itself.

This ultimately implies that, an in-database processing technology is completely different from in-memory storage technology because this used for the storage of data.

Read more on database here: brainly.com/question/13179611

#SPJ1

The STL contains a wide range of generic algorithms such as sorting, searching, merging, reversing, and shuffling, among others. These algorithms operate on containers and iterators and are designed to work efficiently on a variety of data structures.

Here are some more examples of these algorithms:

1. Sorting functions include 'sort()', 'stable sort()', 'partial sort(),' and 'nth element()'.

2. Search functions: 'find()', 'binary search()', 'lower bound()', 'upper bound()', and 'equal range()'.

3. Changing: 'copy()', 'move()', 'swap()', 'fill()', and 'replace()'.

4. Deleting:'remove()', 'remove if()', 'unique()', and 'erase()'.

5. Numeric operations: 'add()', 'inner product()', 'partial sum()', and 'adjacent difference()'.

Partitioning functions include 'partition()', 'stable partition()', and 'is partitioned()'.

7. Permutations: next permutation(), previous permutation(), and random shuffle().

These algorithms are designed to operate with a range of containers and enable efficient data structure manipulation without the need to write specialized code for each task.

Learn more about generic algorithms:

https://brainly.com/question/13921989

#SPJ11

Answer:

if you are on a phone there should be a Answer tab at the bottom in the middle next to influence but if you are on a computer go to the Brainly home page and scroll down to the bottom (not all the way) and there should be some questions to answer

A manifesto is a written declaration or statement that communicates the beliefs, principles, intentions, or goals of an individual, group, or movement. As a designer, creating a manifesto involves articulating your design philosophy, values, and vision to guide your work and communicate your purpose to others.
L
A manifesto serves as a powerful tool for designers to express their perspectives, establish a clear direction, and communicate their principles and intentions. It encapsulates the designer's beliefs about design, their vision for the impact and value of their work, and their stance on important design-related issues.
Creating a manifesto as a designer involves a reflective and introspective process. It starts by clarifying your design philosophy, understanding what motivates and inspires you as a designer, and identifying the values that guide your decision-making. This could include principles such as user-centered design, sustainability, accessibility, or innovation.
Once you have a clear understanding of your beliefs and values, you can articulate them in a manifesto by writing a concise and compelling statement. A manifesto should be authentic, inspiring, and resonate with your intended audience. It should convey the essence of your design approach, express your aspirations, and provide a framework for making design decisions.
A well-crafted manifesto can serve as a guiding light throughout your design journey, helping you stay focused, make meaningful choices, and establish a strong identity as a designer. It also acts as a communication tool, allowing others to understand your perspective, connect with your work, and align with your values.

Learn more about manifesto here
https://brainly.com/question/29574734



#SPJ11

The sample program prompts the user to enter a 3-by-3 matrix of numbers, stores it as a list of lists, calls the sort to python column sorting function obtain the sorted matrix, and prints it to the console in the requested format.

Here's a Python implementation of the requested function sort Columns and a sample program to test it:

python

Copy code

def sort Columns(m):

# transpose the matrix

transposed = [[m[j][i] for j in range(len(m))] for i in range(len(m[0]))]

# sort each column

sorted_cols = [sorted(col) for col in transposed]

# transpose back the sorted matrix

 sorted_m = [[sorted_cols[j][i] for j in range(len(sorted_cols))] for i in range(len(sorted_cols[0]))]

return sorted_m

# sample program

matrix = []

print("Enter a 3-by-3 matrix row by row:")

for i in range(3):

row = [float(x) for x in input().split()]

matrix.append(row)

sorted_matrix = sortColumns(matrix)

print("The column-sorted list is")

for row in sorted_matrix:

print(" ".join(str(x) for x in row))

Explanation:

The sort Columns function takes a matrix m as input and returns a new matrix that has the columns sorted in ascending order. To achieve this, we first transpose the matrix using a nested list comprehension. Then, we sort each column using the sorted function, and finally, we transpose the sorted matrix back to the original shape using another nested list comprehension. The function does not modify the original matrix.

The sample program prompts the user to enter a 3-by-3 matrix of numbers, stores it as a list of lists, calls the sort python column sorting function to obtain the sorted matrix, and prints it to the console in the requested format.

For such more questions on python column sorting function.

https://brainly.com/question/31964486

#SPJ11

Here's the implementation of the sortColumns() function in Python:

def sortColumns(m):

   sorted_cols = []

   num_cols = len(m[0])

   for col in range(num_cols):

       sorted_cols.append([row[col] for row in m])

       sorted_cols[col].sort()

   return [[sorted_cols[j][i] for j in range(num_cols)] for i in range(len(m))]

And here's a sample program that uses the sortColumns() function to sort a 3x3 matrix entered by the user:

python

Copy code

# Prompt the user to enter a 3x3 matrix

print("Enter a 3-by-3 matrix row by row:")

m = [[float(num) for num in input().split()] for i in range(3)]

# Sort the columns of the matrix

sorted_m = sortColumns(m)

# Display the sorted matrix

print("The column-sorted list is")

for row in sorted_m:

   print(' '.join(str(num) for num in row))

Sample Output:

Enter a 3-by-3 matrix row by row:

0.15 0.875 0.375

0.55 0.005 0.225

0.30 0.12 0.4

The column-sorted list is

0.15 0.005 0.225

0.3 0.12 0.375

0.55 0.875 0.4

Learn more about function here:

https://brainly.com/question/12431044

#SPJ11

Using the knowledge in computational language in JAVA it is possible to write a code that enter a series of 10 integers and then determines and displays the largest and smallest values entered.

public class OddEvenSum {  // Save as "OddEvenSum.java"

  public static void main(String[] args) {

    // Declare variables

     final int LOWERBOUND = 1;

     final int UPPERBOUND = 1000;  // Define the bounds

     int sumOdd  = 0;    // For accumulating odd numbers, init to 0

     int sumEven = 0;    // For accumulating even numbers, init to 0

     int absDiff;        // Absolute difference between the two sums

     // Use a while loop to accumulate the sums from LOWERBOUND to UPPERBOUND

     int number = LOWERBOUND;   // loop init

     while (number <= UPPERBOUND) {  // loop test

           // number = LOWERBOUND, LOWERBOUND+1, LOWERBOUND+1, ..., UPPERBOUND

        // A if-then-else decision

        if (number % 2 == 0) {  // Even number

           sumEven += number;   // Same as sumEven = sumEven + number

        } else {                // Odd number

           sumOdd += number;    // Same as sumOdd = sumOdd + number

        }

        ++number;  // loop update for next number

     }

     // Another if-then-else Decision

     if (sumOdd > sumEven) {

        absDiff = sumOdd - sumEven;

     } else {

        absDiff = sumEven - sumOdd;

     }

     // OR using one liner conditional expression

     //absDiff = (sumOdd > sumEven) ? sumOdd - sumEven : sumEven - sumOdd;

     // Print the results

     System.out.println("The sum of odd numbers from " + LOWERBOUND + " to " + UPPERBOUND + " is: " + sumOdd);

     System.out.println("The sum of even numbers from " + LOWERBOUND + " to " + UPPERBOUND + " is: " + sumEven);

     System.out.println("The absolute difference between the two sums is: " + absDiff);

  }

}

See more about JAVA at brainly.com/question/12975450

#SPJ1

In this lab, your task is to create a logical volume using the first partition on each new drive. To do this, you will need to use the "pvcreate" command to initialize the partitions for use with LVM (Logical Volume Manager).

Here's a step-by-step guide to help you:

1. Identify the first partition on each new drive that you want to use for creating the logical volume.

2. Open a terminal or command prompt and run the "pvcreate" command followed by the path to the partition. For example, if the first partition on your new drive is "/dev/sdb1", you would run the command: "pvcreate /dev/sdb1".

3. Repeat the "pvcreate" command for each new drive and its first partition that you want to use.

4. Once you have initialized the partitions with "pvcreate", you can proceed to create a logical volume using the "lvcreate" command. This will involve specifying the size, name, and the physical volumes (PVs) you want to use. However, this specific step is not mentioned in the original question.

By using the "pvcreate" command, you are preparing the first partition on each new drive to be used as physical volumes in the Logical Volume Manager (LVM) system. This allows you to combine multiple physical volumes into a single logical volume, providing flexibility and efficient utilization of storage space.

Remember, the "pvcreate" command is used to initialize partitions for use with LVM. It sets up the partitions as physical volumes that can be later used in the creation of logical volumes.

To know more about Logical Volume Manager, visit:

https://brainly.com/question/31012806

#SPJ11

Answer:

Explanation:

Utility software is software designed to help to analyze, configure, optimize or maintain a computer. It is used to support the computer infrastructure - in contrast to application software, which is aimed at directly performing tasks that benefit ordinary users.

Case tools are primarily used during the design and implementation phase of the Software Development Life Cycle (SDLC).

Case tools, short for Computer-Aided Software Engineering tools, are software applications that assist in various activities throughout the software development process. They encompass a wide range of tools such as diagramming tools, code generators, documentation generators, project management tools, and more. These tools are primarily utilized during the design and implementation phase of the SDLC.

During the design phase, case tools facilitate the creation and visualization of system models, such as data flow diagrams, entity-relationship diagrams, and UML diagrams. These tools help developers and stakeholders to better understand the system's structure, relationships, and functionalities, enabling effective communication and collaboration.

In the implementation phase, case tools aid in the generation of code from high-level designs, reducing manual effort and improving efficiency. Code generators can automatically translate visual representations, such as flowcharts or UML class diagrams, into executable code, helping to ensure accuracy and consistency throughout the development process.

Furthermore, case tools assist in automating routine tasks, such as code formatting and documentation generation, which enhances productivity and maintains code quality. They also offer features like version control, debugging, and testing capabilities, contributing to the overall software development and maintenance process.

In conclusion, case tools play a crucial role in the design and implementation phase of the SDLC by supporting activities such as system modeling, code generation, documentation, and automation. Their usage helps streamline the development process, improve collaboration, and enhance the overall quality of software systems.

Learn more about Software Development Life Cycle (SDLC) here:

https://brainly.com/question/29375116

#SPJ11

Answer:

Security adviser

Explanation:

Answer: 1)Ingrese la URL del sitio web y podrá ver detalles como el nombre de la organización del propietario, el país de registro y la antigüedad del dominio
2)Como individuos, ser veraces significa que podemos crecer y madurar, aprendiendo de nuestros errores

Explanation:

Answer:

breaking a problem into smaller parts

Explanation:

In language of computer science, decomposition is the process in which complex problems are divided into simpler parts. These simpler parts helps in the solving of the complex problems. They are made easier and comprehensible for the user to understand. Each simple part is further analyzed separately and the solution of the complex issues are derived.  The process becomes lengthy but the solution is found.

Answer:

AutoCorrect: D on edge

Explanation:

Answer:

D.AutoCorrect

Explanation:

a software function that automatically makes or suggests corrections for mistakes in spelling or grammar made while typing.: a computer feature that attempts to correct the spelling of a word as the user types it The iPad boasts an autocorrect system that will try to figure out what you mean to type even when you don't quite tap the right keys.

Answer:

- Application programming interfaces are often used to make cross-platform development easier.

-Hybrid apps are cross-platform and provide access to many hardware features.

-Cross-platform development allows programmers to create one version of an app that runs on many different platforms.

Explanation:

The statements that are correct about "cross-development platform" would be:

A). Hybrid apps are cross-platform and provide access to many hardware features.

D). Application programming interfaces are often used to make cross-platform development easier.

E). Cross-platform development allows programmers to create one version of an app that runs on many different platforms.

The Cross-Development platform is described as the process of development of application software that carries the ability to function on various operating systems.

The above statements correctly state that these applications offer access to multiple characteristics of the hardware and work on a number of platforms.

The applications are prepared to allow its access on distinct devices and it helps in making on the application that will work on all platforms.

Thus, options A, D, and E are the correct answers.

Learn more about "Development" here:

brainly.com/question/752980

Answer:

Image result for What is the graphic artist trying to achieve in this illustration, using contrast in color?

Having a contrast of size adds visual interest in the composition, and will help you establish the key elements in your layout so you can be sure the viewer is focusing on the right area. Contrast of size is not applicable to just text; it can also be the images in the design.

Explanation:

Answer: the answer is emphasis

Explanation:

The IT area that Reggie should call is called; Information Security

The IT department that Reggie should call is called Information Security department.

This is because Information security protects sensitive information from unauthorized activities such as inspection, modification, recording, and any disruption or destruction.

The aim of this department is to make sure that the safety and privacy of critical data such as customer account details, financial data or intellectual property are safe.

Read more about information technology at; https://brainly.com/question/25920220

Answer:

4. flase

5. true

Explanation:

If your getting wifi signal on your phone right now while where running in your house or traveling through the kitchen, you don't have to sit in one spot.

I tried doing that with another phone but It didn't work... :(

Answer:

b

Explanation:

for exaple brainly.com is easy to remember instead of 104.17.73.91

Since all network configuration settings have been verified but since the application is new, a good first step in troubleshooting the problem is option C. Uninstall and reinstall the application.

Finding and fixing problems with complicated machines, electronics, computers, and software systems frequently involves troubleshooting, a methodical approach to problem-solving.

Note that Finding the root of a computer system error and fixing the corresponding hardware and software problems are done systematically through troubleshooting. The key to a successful resolution of a problem is to approach it logically and methodically.

Therefore, A program's associated files are deleted from the hard drive of a computer during an uninstall. The delete function only removes a portion of a program or a selected file, as opposed to the uninstall feature, which safely and effectively deletes all associated files.

Learn more about  troubleshooting from

https://brainly.com/question/26417401
#SPJ1

See full question below

A: You are testing a new client server application and the application doesn't appear to be communicating successfully between the client and server. All network configuration settings have been verified but since the application is new, you are unsure of all the protocols that are used. What is a good first step in troubleshooting the problem?

a. configure the firewall to use a different profile

b. disable the firewall

c. uninstall and reinstall the application

d. reset the switch and router

Answer:

The data would be copied over to the new box

Explanation:

Answer:

web browser.

Explanation:

yea let me go post my password to block content (sarcasm)

Answer:

1. COBOL: Common Business-Oriented Language

2. Assembly language is based on machine code.

3. Stat: Statistical Analysis System

4. SQL: Structured Query Language

5. Decimal: Decimal number system consists of 10 digits.

Mnemonic codes: Mnemonic codes are used to represent instructions or data in a more human-readable format, making it easier for programmers to remember and understand. Examples of mnemonic codes include ADD (addition), SUB (subtraction), and MOV (move). They are commonly used in assembly language programming.

Compiler: A compiler is a language processor that translates high-level programming code into machine code, which can be directly executed by a computer. It performs various tasks such as syntax analysis, optimization, and code generation.

High-level language: A high-level language is a programming language that is designed to be easier for humans to read, write, and understand. It provides a higher level of abstraction and is closer to natural language compared to low-level languages like assembly or machine code.

Fifth-generation language: A fifth-generation language (5GL) is a programming language that focuses on artificial intelligence and problem-solving using a high-level, declarative approach. It allows programmers to specify what needs to be done rather than how to do it. Examples of 5GLs include Prolog and OPS5.

A decade counter connected in series with a divide-by-8 counter will result in a divide-by-80 circuit.

Step 1: Understand the counters
A decade counter is a digital circuit that counts from 0 to 9 (10 states), while a divide-by-8 counter counts from 0 to 7 (8 states).

Step 2: Connect the counters in series
When connected in series, the output of the first counter (decade counter) becomes the input of the second counter (divide-by-8 counter).

Step 3: Determine the total count
As the decade counter counts 10 states and the divide-by-8 counter counts 8 states, their combined count will be the product of both counters' states: 10 * 8 = 80.

In conclusion, connecting a decade counter in series with a divide-by-8 counter results in a divide-by-80 circuit, which will count 80 distinct states before returning to its initial state.

To know more about circuit visit:

https://brainly.com/question/12608491

#SPJ11

A decade counter connected in series with a  divide-by-8 counter will result in a divide-by-80 circuit.

A base-10 counter known as a decade counter is used to advance one count with each clock pulse. The standard configuration usually displays ten different values, which correspond to the digits 0 through 9.

A counter that increases by one after 8 clock pulses is referred to as a "divide-by-8" counter. There are a total of 8 distinct output states to indicate numbers from 0 through 7.

Learn more about circuit from

https://brainly.com/question/2969220

#SPJ4