______ tend to increase the explosive potential of a magma body beneath a volcano.
High viscosity and high dissolved gas content.

The crab species described, which produces a large number of eggs but experiences high mortality rates during severe weather patterns, is an example of a small population. Option C is correct.

A small population refers to a relatively low number of individuals within a species that occupy a particular geographic area. In this case, despite the high reproductive output of the crab species (producing thousands of eggs), the mortality rate during severe weather patterns suggests that the population size remains small due to the high levels of mortality.

Severe weather patterns can negatively impact the survival and reproductive success of individuals within a population. If the mortality rate is high during such events, it can lead to a reduction in the population size. In this scenario, even though the species produces a large number of eggs, the overall population remains small due to the high mortality rate caused by severe weather conditions.

Hence, C. is the correct option.

To know more about mortality rates here

https://brainly.com/question/13493110

#SPJ4

Answer:it’s FDA-approved

Explanation:

Don’t do amazing results it’s wrong I took the test

Answer:

0-degrees latitude, at the equator. The temperatures would be higher because the radiation from the sun is more direct. The overall energy is greater per square meter because the sunlight is more direct.

Answer:

False.

Explanation:

Pseudoscience are not exact and precise. In fact, they are mistaken practices/methods that are not part of the scientific method or based on the scientific method.

Answer:

False.

Explanation:

Pseudoscience are not exact and precise.

Answer:

example of virus: coronavirus or megavirus

example of bacteria: Micrococcus

they are both microscopic microbes. Both of them can cause diseases in plants and animals. Both these types of microbes contain enzymes required for the DNA replication and protein synthesis.

Explanation:

hope this helps please mark me as brainliest

thank you!

By subtracting the distance hiked on the first day from the total distance, we can determine the specific distance covered on the second day. In this case, the second-day distance is found to be approximately 30.7 km.

To calculate the distance Lupe hiked on the second day, we need to subtract the distance she hiked on the first day from the total distance hiked over the two days.

Let's break down the problem. We know that Lupe hiked a total of 65 km over the two days. On the first day, she hiked 34.3 km. To find out how far she hiked on the second day, we can subtract the distance hiked on the first day from the total distance hiked.

Total distance hiked – Distance hiked on the first day = Distance hiked on the second day

Substituting the values we have:

65 km – 34.3 km = Distance hiked on the second day

Performing the calculation:

30.7 km = Distance hiked on the second day

Therefore, Lupe hiked approximately 30.7 km on the second day.

To learn more about subtracting, Click here: brainly.com/question/13619104

#SPJ11

Answer:

Disorders of chromosome number include the duplication or loss of entire chromosomes, as well as changes in the number of complete sets of chromosomes. They are caused by nondisjunction, which occurs when pairs of homologous chromosomes or sister chromatids fail to separate during meiosis.

Explanation:

Answer:

B) It cannot be controlled

Answer:

B) It cannot be controlled.

Carbon is cycled through plants through the process of photosynthesis, where carbon dioxide from the atmosphere is absorbed by plants and converted into organic carbon compounds such as sugars, starches, and cellulose. This carbon is used as a source of energy and building material for the plant's growth and development. In turn, plants release oxygen into the atmosphere through a process called respiration, where they break down organic carbon compounds to release energy for their metabolic processes. Additionally, carbon in the form of dead plant material can be stored in the soil as organic matter, where it can be decomposed and eventually released back into the atmosphere as carbon dioxide through processes such as microbial decomposition.

please mark brainliest

When magmas reach the Earth's surface and cool and crystallize in subaerial or subaquatic conditions, the resulting rocks are called extrusive or volcanic. Igneous rocks are made up of minerals from the silicate group.

Igneous or magmatic rocks are those that form when magma cools and solidifies.

If cooling occurs slowly below the surface, rocks with large crystals called plutonic or intrusive rocks are formed, while if cooling occurs rapidly above the surface

Answer:

Sure! Here are five facts about multiple alleles: 1. Multiple alleles refer to the existence of more than two alleles for a particular gene in a population. 2. Each individual organism still possesses only two alleles for a given gene, but the population as a whole can have multiple alleles. 3. Multiple alleles can result in different phenotypes (observable traits) for a single gene depending on which alleles are present. 4. Blood type is an example of multiple alleles in humans, with the ABO blood group system being determined by three alleles: A, B, and O. 5. Multiple alleles can lead to genetic diversity within a population, which can be advantageous for survival and adaptation to changing environments.

To determine the number of hours that have passed since the original two bacteria were placed in the dish, we can use the fact that the number of bacteria quadruples every hour.

Starting with two bacteria, we can observe the progression:

Hour 1: 2 bacteria

Hour 2: 2 x 4 = 8 bacteria

Hour 3: 8 x 4 = 32 bacteria

Hour 4: 32 x 4 = 128 bacteria

Hour 5: 128 x 4 = 512 bacteria

Hour 6: 512 x 4 = 2048 bacteria

Hour 7: 2048 x 4 = 8192 bacteria

Hour 8: 8192 x 4 = 32768 bacteria

Hour 9: 32768 x 4 = 131072 bacteria

Therefore, it took 9 hours for the number of bacteria to reach 131,072.

To solve more questions on bacteria , visit the link below

brainly.com/question/30217998

#SPJ11

Glutamate is the neurotransmitter released at the rod-bipolar cell synapse. c) hyperpolarize; entry

When there is light, the rod membrane potential will hyperpolarize due to the entry of cations through the channel. Glutamate, the neurotransmitter released at the rod-bipolar cell synapse, normally inhibits the bipolar cell from firing action potentials. In the dark, the rod cells are depolarized and continuously release glutamate, which inhibits the bipolar cells.

However, when light enters the eye and strikes the rod cells, a photopigment called rhodopsin undergoes a conformational change, leading to the closure of sodium channels and hyperpolarization of the rod cell. This hyperpolarization decreases the release of glutamate, which in turn reduces inhibition on the bipolar cell, allowing it to depolarize and transmit the visual signal to higher visual centers in the brain.

Learn more about Glutamate here: brainly.com/question/10089303

#SPJ11

Answer:

heat

Explanation:

heat and electricity is what is used to cook/toast the bread

Answer:

The electromagnetic (EM) spectrum is the range of all types of EM radiation. Radiation is energy that travels and spreads out as it goes.the visible light that comes from a lamp in your house and the radio waves that come from a radio station are two types of electromagnetic radiation.

Ted may have a tumor in the HYPOTHALAMUS. This region of the brain controls appetite.

The hypothalamus is fundamental for controlling the body's temperature, weight (appetite), emotions, maintaining the body's internal balance (homeostasis), etc.

The hypothalamus is a small brain area that forms the hypothalamus-pituitary complex, which is a command center of the endocrine system.

The hypothalamus is the part of the brain known to modulate the release of different hormones from the pituitary gland, which is a key component of the endocrine hormone system.

Learn more in:

https://brainly.com/question/7245217

The most likely result to occur due to orographic uplift is cloud formation and precipitation.

The correct answer would be cloud formation and precipitation.

The most likely result to occur due to orographic uplift is cloud formation and precipitation. Orographic uplift refers to the lifting of air as it encounters a mountain or elevated terrain. As the air is forced to rise, it undergoes adiabatic cooling, which can lead to the condensation of water vapor and the formation of clouds.

When moist air encounters a mountain or any elevated obstacle, it is forced to rise along the windward side. As the air ascends, it cools adiabatically, meaning the temperature decreases as it expands due to decreasing atmospheric pressure. As the air cools, its ability to hold moisture decreases, leading to the condensation of water vapor and the formation of clouds. This process is known as orographic lifting, and it is responsible for the creation of clouds and subsequent precipitation on the windward side of the mountain.

The type of clouds that form due to orographic uplift depends on various factors such as temperature, humidity, and stability of the air. Examples of clouds that can form in this process include stratiform clouds (layered clouds) or cumuliform clouds (puffy, vertically-developed clouds). The presence of moisture in the air, combined with the lifting effect of the terrain, promotes the development of clouds and precipitation.

While orographic uplift can enhance atmospheric instability and contribute to localized weather patterns, it is not directly associated with tornado formation or the development of hurricanes. Tornadoes typically form within severe thunderstorms, while hurricanes are large-scale tropical cyclones that form over warm ocean waters. Clear skies and fair weather are less likely outcomes when encountering orographic uplift, as the lifting of air and subsequent cloud formation often result in increased atmospheric moisture and the potential for precipitation.

In summary, orographic uplift primarily leads to cloud formation and precipitation as moist air is forced to rise over mountains or elevated terrain. This process is responsible for the creation of clouds and can contribute to localized weather patterns and enhanced precipitation in the vicinity of the uplifted region.

For more such information on: orographic uplift https://brainly.com/question/7953085

#SPJ8

The size of the bacterial population after 80 minutes is 12,000 bacteria. The size of the bacterial population after 5 hours is 96,000 bacteria.

1. Convert the given time to hours:

  - 80 minutes = 80/60 = 1.33 hours

  - 5 hours = 5 hours

2. Determine the number of doubling periods for each time interval:

  - 80 minutes = 1.33 hours -> 1.33 / 0.5 = 2.66 doubling periods

  - 5 hours -> 5 / 0.5 = 10 doubling periods

3. Calculate the population size after each doubling period:

  - For 80 minutes: 1500 bacteria * (\(2^{2.66\)) ≈ 12,000 bacteria

  - For 5 hours: 1500 bacteria * (\(2^{10\)) = 96,000 bacteria

Therefore, the size of the bacterial population after 80 minutes is 12,000 bacteria, and the size of the bacterial population after 5 hours is 96,000 bacteria.

For more such questions on bacterial, click on:

https://brainly.com/question/8695285

#SPJ8

Answer: A

Explanation:

The correct option is A. Solid has a definite shape. In solids, the particles are closer to each other.

There are three states of matter. They are solid, liquid and gases. Solid has a definite shape. The particles are much closer and there are the least intermolecular spaces between them.

Many materials can be used to create solids. They may be made of different compounds or just pure elements. A mixture is a substance that contains more than one type of chemical.

The majority of rocks are assemblages of various chemicals. A good illustration of a man-made solid combination is concrete.

Therefore, The correct option is A. Solid has a definite shape. In solids, the particles are closer to each other.

To learn more about solid, refer to the link:

https://brainly.com/question/17061172

#SPJ2

Answer:

Explanation:

Nucles h

The table showing the products of crude oil such as gasoline is found in the attachment.

Crude oil is a complex mixture of hydrocarbons that can be refined to produce a wide range of products, including:

Gasoline: a light liquid fuel used in internal combustion engines in cars and other vehicles.

Diesel fuel: a heavier liquid fuel used in diesel engines in trucks, buses, and other heavy-duty vehicles.

Jet fuel: a specialized fuel used in aircraft.

Heating oil: a fuel used for heating homes and buildings.

Liquefied petroleum gas (LPG): a mixture of propane and butane that is used as a fuel for heating, cooking, and transportation.

Lubricants: oils and greases used to reduce friction in machinery and engines.

Asphalt: a heavy, thick liquid used in road construction and maintenance.

Petrochemicals: chemicals derived from crude oil that are used to produce a wide range of products, including plastics, fertilizers, and pharmaceuticals.

Wax: a solid material used in candles, polishes, and other products.

The specific products obtained from crude oil depend on the refining process used, as well as the quality and composition of the crude oil.

Learn more about crude oil at: https://brainly.com/question/14260176

#SPJ1

Answer:

Deep scattering layer, DSL

Explanation:

The deep scattering layer (DSL) also known as "deep sound layer", refers to an oceanic deep layer, more or less defined, that reflects sound and that is formed by a wide variety of animals. It is present in almost every ocean. It is produced by the presence of many organisms of different species that can disperse the sonar waves sent by a sonar equipment.

It was discovered through the ships´ sonar. Whenever they met a layer in which the sound hit, and was often confused with the bottom of the ocean. This is why the DSL is refered to as the "fake bottom".

These animals form layers of not less than 10 meters thick and might easily reach up to 50 meters thick. These layers are often found between 50 and 200 meters deep and can be seen going up and down every day according to the daily vertical migration.  

The osmotic challenge the marine iguanas must overcome is: increased concentration of body fluids by salt gain.; option E is correct.

The osmolarity of a solution is the number of dissolved particles of a solute per liter of solution. It is a way to express the concentration of solution.

The unit of osmolarity is osmol/L or mosm/L.

The higher the number of solute particles dissolved in a given volume of solvent in liters, the higher the osmolarity of the solvent will be.

Considering the given situation where the marine iguana drinks sea water which is of higher osmolarity than blood, the marine iguana has to find a way to ensure that the excess salt is removed. This is because, due to the higher osmolarity of the seawater compared to the marine Iguana's blood, water molecules would tend to move out from the cells in order to dilute the seawater taken in by the iguana. Hence, the risk of dehydration is high.

Learn more about osmolarity at: https://brainly.com/question/13258879

#SPJ1

Complete question:

The only source of water for marine iguanas is seawater with an osmolarity of 1000 mOsm Marine iguana body fluids are normally 370 mOsm Marine iguanas drink seawater; but their blood osmolarity does not increase: What osmotic challenges must they overcome?

A) Dilution of body fluids by water gain and salt gain.

B) Dilution of body fluids by water gain and salt loss:

C) Increased concentration of body fluids by salt gain and water gain:

D) Increased concentration of body fluids due to high uric acid production:

E) Increased concentration of body fluids by salt gain.

where photosynthesis takes place

Answer: Hi!

Discontinuous variations are differences in a population (for example, a group of pea plants) that can be clearly seen. For example, the peas can be wrinkled or smooth, or can have wide, short seed pods, or long, thin seed pods. These are determined by different alleles.

Hope this helps!

1. Hypsodont teeth: Hypsodont teeth are characterized by having a high crown and limited growth, which allows for continuous wear and makes them suitable for grinding rough, fibrous plant material.

2. Dental formula: The dental formula is a shorthand notation used to represent the number of each type of tooth present in an animal's jaw. It indicates the number of incisors, canines, premolars, and molars in one side of the upper and lower jaws.

3. Digitigrade: Digitigrade locomotion is when an animal walks on its digits (toes), with the heel and wrist elevated off the ground. This is commonly seen in animals like cats and dogs.

4. Selenodont dentition: Selenodont dentition refers to teeth with crescent-shaped ridges on the grinding surface, which is typically found in some herbivorous mammals like deer and cows.

5. Fossorial: Fossorial animals are those that are adapted for digging and living underground, such as moles and certain types of rodents.

6. Odontoceti: Odontoceti is a suborder of cetaceans (whales, dolphins, and porpoises) that have teeth instead of baleen plates. Examples include dolphins, porpoises, and sperm whales.

7. Precocial: Precocial animals are those that are relatively mature and mobile from the moment they are born or hatched. Examples include ducks, chickens, and ungulates.

8. Carnassials: Carnassials are specialized teeth found in carnivorous mammals that are adapted for shearing flesh. They consist of a modified upper premolar and a lower molar.

9. Tragus: The tragus is a small, pointed, cartilaginous flap in front of the external opening of the ear, which is present in many mammals.

10. Saltatorial: Saltatorial locomotion refers to jumping or hopping movement, which is commonly seen in animals like kangaroos and rabbits.

Regarding Section 2, the question is not clear enough to provide a matching answer. Please provide more context or specific characteristics that need to be matched with the cetacean species mentioned.

To know more about "Locomotion" refer here:

https://brainly.com/question/15975093#

#SPJ11

Horizontal gene transfer is the transfer of genetic material from one organism to another organism that is not its offspring.

This transfer can occur through various mechanisms, including bacterial conjugation, transduction (transfer by a virus), and transformation (uptake of  DNA from the environment).

Antibiotic resistance can be passed from one bacterium to another through horizontal gene transfer, which allows bacteria to quickly spread resistance to antibiotics to other bacteria. This can result in the emergence of antibiotic-resistant strains that are difficult to treat and can lead to serious health problems.

To know more about horizontal gene transfer click here:

https://brainly.com/question/13049502#

#SPJ11