tempered glass is used for all but which one of the following products: (a) all-glass doors, (b) automobile windshields, (c) safety glasses, (d) windows for tall buildings?
Answers
Tempered glass is not used for (b) automobile windshields. Instead, laminated glass is commonly used for this application due to its shatter-resistant properties and ability to maintain its structure upon impact.
Tempered glass is used for all of the products 22listed except for windows for tall buildings. This is because windows for tall buildings require a different type of glass that is specifically designed for their unique structural requirements. Typically, these windows are made from laminated glass or insulated glass units that are specifically engineered to provide additional strength and safety features.
Tempered glass is not used for (b) automobile windshields. Instead, laminated glass is commonly used for this application due to its shatter-resistant properties and ability to maintain its structure upon impact.
To learn more about Tempered glass , click here:
brainly.com/question/3035570
#SPJ11
Tempered glass is a type of safety glass that is used in a variety of applications due to its strength and durability. It is created by heating the glass to a high temperature and then rapidly cooling it, which causes the surface of the glass to compress and the interior to expand.
option B is the correct answer
This process makes tempered glass much stronger than regular glass, and also causes it to break into small, rounded pieces instead of sharp, jagged shards.Tempered glass is commonly used for all-glass doors, automobile windshields, and safety glasses, as these applications require a strong and shatter-resistant material. However, tempered glass is not typically used for windows in tall buildings. Instead, laminated glass is the preferred choice for these applications.Laminated glass is created by sandwiching a layer of plastic between two sheets of glass, which creates a material that is strong, durable, and shatter-resistant. This makes it ideal for use in high-rise buildings, where safety and durability are top priorities. Laminated glass is also commonly used in skylights, windshields for airplanes, and other applications where safety is a concern.In summary, while tempered glass is a versatile and strong material that is used in many different applications, it is not typically used for windows in tall buildings. Laminated glass is the preferred choice for these applications, as it provides superior safety and durability.For such more question on versatile
https://brainly.com/question/23960919
#SPJ11
Related Questions
please i want to paraphrase this paragraph please helppppppppp don't skip!!!!!!
Answers
an industrial plant load is rated at 2.8 mva at 0.7 pf lagging. if a capacitor bank rated at 3 mva is added to the load, the new overall power factor of the system is most nearly:
Answers
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Which design activity is part of the design for manufacturability (DFM) methodology?
Aavold parts that are mirror Images
B. establish guidelines on the go
с. some asymmetrical parts are acceptable
D.
maximize utilization of setup time
Answers
Answer:
D would be correct because it maximizes it.
Typical journal-to-bearing clearance is......
A) 0.00015 to 0.00018 inch
B)0.0005 to 0.0025 inch
C) 0.15 to 0.25 inch
D)0.02 to 0.035 inch
Answers
C
Why
I took the quiz
The typical journal-to-bearing clearance for engines is,
B) 0.0005 to 0.0025 inch
Given that,
To find the typical journal-to-bearing clearance for engines.
Now, The range 0.0005 to 0.0025 inch represents the recommended clearance between the rotating journal of the crankshaft and the bearing surface to ensure proper lubrication and minimal friction.
Hence, The correct option for typical journal-to-bearing clearance for engines is,
B) 0.0005 to 0.0025 inch.
To learn more about journal-to-bearing visit:
https://brainly.com/question/16971319
#SPJ4
A light bulb has a normally distributed light output with mean 5,000 end foot-candles and
standard deviation of 50 end foot-candles. Find a lower specification limit such that only
0.5% of the bulbs will not exceed this limit.
Answers
The specification limit where 0.5% of the bulbs will not exceed the limit of the standard deviation is given as: 4,871.50. This is computed using the z-table/ z-score.
What is a specification limit?Customer specification limits are the objectives set for a product or process based on customer or market performance; the Voice of the Customer is frequently used as input for customer specification limits. In other words, we measure the desired outcome of the metric.
To compute the above we say:
From the z-table, a z-score of -2.57 cuts off 0.005 in the left tail;
Given the formula for z-score = (x-μ)/σ
Where
Z = Standard Score
x = observed value
μ = Mean of the sample; and
σ = Standard deviation of the sample
We have:
(x-5000)/50 = -2.57
Solving for x we get:
x-5000=-128.5
x = -128.5+5000
x = 4871.50
Learn more about specification limits:
https://brainly.com/question/29023805
#SPJ1
An NPN BJT has Ebers-Moll parameters αf = 0. 998, αR = 0. 80, and Is = 1. 0 x 10-10 A. Calculate IE, IB, and Ic for VBC = -1. 0 V and VBE = 0. 7 V
Answers
For VBC = -1.0 V and VBE = 0.7 V, the approximate values of IE (Emitter Current), IB, and IC for the given NPN BJT are approximately 2.51 mA, 24.8 μA, and 2.48 mA, respectively.
To calculate the values of IE (Emitter Current), IB (Base Current), and IC (Collector Current) for the given NPN BJT with Ebers-Moll parameters, we can use the following equations:
1. IE = IB + IC
2. IC = αf * IB + αR * IE
3. IC = β * IB
Given:
αf = 0.998
αR = 0.80
Is = 1.0 x 10^-10 A
VBC = -1.0 V
VBE = 0.7 V
We need to solve for IE, IB, and IC using these equations.
First, let's find IB using equation (3):
IC = β * IB
Since the β (beta) value is not given, we cannot directly calculate IB. However, we can make an approximation assuming β is large, typically in the range of 100-1000 for BJTs.
Assuming β = 100, we can calculate IB:
IC = 100 * IB
Now, let's calculate IC using equation (2):
IC = αf * IB + αR * IE
Substituting the value of αf and the approximation of IC = 100 * IB, we get:
IC = 0.998 * IB + 0.80 * IE
We can substitute IC = 100 * IB in the above equation to eliminate IC:
100 * IB = 0.998 * IB + 0.80 * IE
Simplifying, we get:
0.002 * IB = 0.80 * IE
Rearranging the equation, we have:
IE = (0.002 * IB) / 0.80
Now, let's substitute this value of IE in equation (1):
IE = IB + IC
Substituting IC = 100 * IB, we get:
IE = IB + 100 * IB
Simplifying, we have:
IE = 101 * IB
Now, we can substitute the value of IE from the previous equation into equation (4) to find IB:
(0.002 * IB) / 0.80 = 101 * IB
Simplifying, we get:
0.002 = 80.8 * IB
Solving for IB:
IB = 0.002 / 80.8
Finally, we can calculate IC using IC = 100 * IB:
IC = 100 * (0.002 / 80.8)
Now, let's substitute the given values and calculate the results:
IB = 0.002 / 80.8 ≈ 2.48 x 10^-5 A (or 24.8 μA)
IC = 100 * (0.002 / 80.8) ≈ 2.48 x 10^-3 A (or 2.48 mA)
IE = 101 * IB ≈ 2.51 x 10^-3 A (or 2.51 mA)
Therefore, for VBC = -1.0 V and VBE = 0.7 V, the approximate values of IE, IB, and IC for the given NPN BJT are approximately 2.51 mA, 24.8 μA, and 2.48 mA, respectively.
To know more about Emitter Current, please click on:
https://brainly.com/question/29255271
#SPJ11
What are the 2 main sources of data
Answers
Following are the two sources of data:
Internal Source. When data are collected from reports and records of the organisation itself, it is known as the internal source. ... External Source. When data are collected from outside the organisation, it is known as the external source.IamSugarBee
Answer:
I hope this helps
Explanation:
.... Internal source
.... External source
Draw the free-body diagram of the beam which supports the 80-kg load and is supported by the
pin at A and a cable which wraps around the pulley at D.
Answers
The free-body diagram of the beam which supports the 80-kg load and is supported by the pin at A can be seen in the image attached below.
The first image shows the diagram of the beam and the second image shows the free-body diagram of the beam.
The resolution of forces in the system is well understood by the principle of equilibrium where a stationary body will remain balanced when subject to parallel forces provided that the total sum of the overall external forces is zero.
The free-body diagram is a graphical representation used to visualize the forces applied to an object.
The equilibrium of forces on the x-axis is:
\(\mathbf{\sum F_x = 0}\)
The equilibrium of forces on the y-axis is:
\(\mathbf{\sum F_y = 0}\)
The equilibrium condition at any point is:
\(\mathbf{\sum M = 0}\)
From the free body diagram attached in the second image below,
the horizontal reaction is located at point A as \(\mathbf{ A_x}\) the vertical reaction is located at point A as \(\mathbf{A_y}\) the tension = Tthe weight = WTherefore, we can conclude that the free-body diagram of the beam which supports the 80-kg load and is supported by the pin at A can be seen in the image attached below.
Learn more about the free-body diagram here:
https://brainly.com/question/19345060?referrer=searchResults
how cloud computing will help erp implementations find success
Answers
Cloud computing can significantly contribute to the success of ERP (Enterprise Resource Planning) implementations in several ways:
Scalability: Cloud-based ERP systems offer scalability, allowing businesses to easily adjust their resources and infrastructure based on their needs. This flexibility ensures that ERP systems can accommodate changing business requirements and handle increased workloads effectively.
Cost-effectiveness: Cloud-based ERP eliminates the need for on-premises hardware and infrastructure investment. Instead, businesses can opt for a subscription-based model, paying for the resources and services they use. This approach reduces upfront costs and allows organizations to allocate their budgets more efficiently.
Accessibility and Collaboration: Cloud-based ERP systems enable remote access, allowing employees to access critical business data and collaborate across different locations and devices. This accessibility fosters efficient communication and collaboration, enhancing productivity and decision-making processes.
Data Security and Backup: Cloud providers implement robust security measures and data backup systems, ensuring that ERP data is protected from potential threats and disasters. This level of security and backup capabilities can enhance data integrity and business continuity.
Continuous Updates and Support: Cloud-based ERP systems receive regular updates and maintenance from the cloud provider, ensuring that businesses have access to the latest features, security patches, and support services. This eliminates the need for manual updates and maintenance tasks, freeing up IT resources for other critical activities.
Overall, cloud computing provides a flexible, cost-effective, and secure infrastructure for ERP implementations, enabling businesses to focus on their core operations and achieve success in leveraging ERP systems for improved efficiency, collaboration, and decision-making.
Learn more about implementations here
https://brainly.com/question/31981862
#SPJ11
with refer undial TWELVE REASONS WHY RECONNAISSANCE IS ONE OF MOST IMPORTANT ASPECT OF ANY SURVEYS
Answers
A thorough examination of a large region that could be utilized as a road or an airport is called a reconnaissance survey.
What is the goal of the reconnaissance survey?
Its goal is to discover the more attractive routes or places while excluding the unworkable or impractical options. Existing maps and aerial photos could be very helpful.
The following are the fundamentals of the reconnaissance survey:
THE RECONNAISSANCE OBJECTIVE AS THE ORIGIN CONNECTS WITH AND MAINTAINS ENEMY FORCES. MAKE SURE TO RECONNAISSANCE CONSISTENTLY. KEEP YOUR ROOM FOR MANEUVER. FAST AND ACCURATE INFORMATION REPORTING-RETENTION OF RECONNAISSANCE ASSETS BUILD UP THE SITUATION QUICKLY.Since the examination is an important part of reconnaissance survey is considered the important aspect
To know more on the reconnaissance please follow this link
https://brainly.com/question/21906386
#SPJ9
A tensile test is performed on a metal specimen, and it is found that a true
plastic strain of 0.16 is produced when a true stress of 500 MPa is applied; for the
same metal, the value of K in the quation is 825 MPa). Calculate the true strain that
results from the application of a true stress of 600 MPa .
Answers
Answer:
600 mpa
Explanation:
It's smart for a equation then you reperfuce
The two main types of disc brake calipers are:
a. fixed and free
b. fixed and sliding.
c. free and sliding.
d. fixed and broken
Answers
Answer: b fixed and sliding
Explanation:
eggzOG43199
:) it has to be more than 20 characters so I'm just saying this
Answers
Answer:
giberishgiberishgiberishgiberishgiberishgiberishgiberishgiberishgiberish
Explanation:
i have no idea what the question is but do u 4 real need help?
What long shaft a tool works in a combination with a impact wrench air to install Lugnuts on wheels
Answers
An elevation is.... * 10 points a. A detailed description of requirements, composition and materials for a proposed building. b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building. c. The development of the last remaining lots in an existing developed area, the new development within an area already served by existing infrastructure and services, or the reuse of already developed, but vacant properties. d. The practice of creating structures and using processes that are environmentally responsible and resource-efficient throughout a building's life-cycle from siting to design, construction, operation, maintenance, renovation and deconstruction.
Answers
Answer:
b. A view of a building seen from one side, a flat representation of one façade. This is the most common view used to describe the external appearance of a building.
Explanation:
An elevation is a three-dimensional, orthographic, architectural projection that reveals just a side of the building. It is represented with diagrams and shadows are used to create the effect of a three-dimensional image.
It reveals the position of the building from ground-depth and only the outer parts of the structure are illustrated. Elevations, building plans, and section drawings are always drawn together by the architects.
Why is recycling important
Answers
Answer:
Recycling reduces waste sent to landfills and incinerators.
Recycling prevents pollution.
Recycling conserves natural resources.
Recycling conserves energy.
Recycling creates jobs, producing economic benefits.
:-P~♥~
Two first-order systems are in series, described by:
*****Image shows the two systems******
(a) Develop a transfer function for the two systems in series (an overall transfer
function)
(b) Give the forced, steady state response to the forcing function sin 3�
Answers
The overall transfer function for the two systems in series is 2/ s²(2s + 1)(3s + 1).
What is the transfer function?It should be noted that to develop the transfer function for the two systems in series, we need to first express them in terms of transfer functions:
For the first system:
2dy/dt + y = 1
2sY(s) + Y(s) = 1/s
Y(s)(2s + 1) = 1/s
Y(s) = 1/s(2s + 1)
For the second system:
3dy/dt + y = 2
3sY(s) + Y(s) = 2/s
Y(s)(3s + 1) = 2/s
Y(s) = 2/s(3s + 1)
The overall transfer function for the two systems in series is obtained by multiplying their individual transfer functions, since the output of the first system is the input to the second system.
Hence, the overall transfer function is given by:
G(s) = Y(s)/X(s) = (1/s(2s + 1)) * (2/s(3s + 1))
G(s) = 2/ s²(2s + 1)(3s + 1)
Learn more about transfer function on
https://brainly.com/question/24241688
#SPJ1
An open vent pipe that passes through a roof should extend at least _____ inches above the roof.
12
9
3
6
Answers
An open vent pipe that passes through a roof should extend at least 12 inches above the roof.
When discussing the proper height of an open vent pipe passing through a roof, it is important to follow building code guidelines to ensure safety and proper function. According to the International Residential Code (IRC), an open vent pipe that passes through a roof should extend at least 6 inches above the roof. This helps to prevent water and debris from entering the pipe and causing issues in the plumbing system.
To adhere to building code guidelines, an open vent pipe that passes through a roof should extend at least 6 inches above the roof.
To learn more about open vent pipe, visit:
https://brainly.com/question/31764049
#SPJ11
admixtures are used in concrete to: group of answer choices enable cement hydration. provide compressive strength. delay hardening. create an alkaline environment.
Answers
Admixtures are used in concrete to delay hardening.
Admixtures are utilized in concrete to postpone hardening. The hardening method includes heating the additives above the critical (normalizing) temperature, protecting at this temperature for one hour in line with inch of thickness cooling at a price speedy sufficient to permit the cloth to convert to a miles harder, more potent structure, after which tempering. Hardening means a metallurgical metalworking method used to growth the hardness of a metallic. The hardness of a metallic is at once proportional to the uniaxial yield strain on the region of the imposed strain.
Learn more about hardening at https://brainly.com/question/20813115
#SPJ4
Describe the medium/long-range transportation options available to people prior
to and after the Industrial Revolution.
Answers
Answer:
answer below:
Explanation:
Before the Industrial Revolution, transportation relied on animals (like horses pulling a cart) and boats. Travel was slow and difficult. It could take months to travel across the United States in the early 1800s before industrial revolution
The Industrial Revolution completely changed the way people traveled and how goods were transported.
the problem of traveling upstream was solved during the industrial revolution by the steam engine. in order to make better use of water transportation, canals were build to connect rivers, lakes and oceans. the invention of the railroad and the steam powered locomotive opened up a whole new world in transportation. even with steamboats and railroads, people still needed a better wat to travel between rivers and train stations. a new process called the "macadam " process was used to create smooth gravel roads
I hope this helps a bit.
We have a credit charge that is trying to process but we do not remember signing up and email login is not working? Is there a way to check?
Answers
Answer:
Yes
Explanation:
In such a case, one way to check the credit charge is to contact your bank, doing so would allow the bank to check your account properly to determine where the transaction was originated from.
Another way you could check is to contact the online merchant where such a transaction was initiated.
In real world, sampling and quantization is performed in an analog to digital converter (ADC) and reconstruction is performed in a digital to analog converter (DAC). Which of the following statements hold true (fs denotes the sampling frequency)?
a. the reconstruction filter can be found in the DAQ
b. the antialiasing filter removes all frequencies of the continuous-time analog input signal that are above fs/2
c. the DAC needs to know the sampling frequency of the ADC to correctly reconstruct the signal.
d. the reconstructed continuous-time signal only contains frequencies up to fs/2
Answers
Answer:
b
Explanation:
a) ADC is located on DAQ filter but not the reconstruction filter
b) to remove aliasing, the sampling rate must be greater than or equal ot twice the highest frequency component in the input signal. In other words, all frequencies in input sgnal are less than fs/2. Therefore, frequencies greater than fs/2 are removed by anti-aliasing filter
c) the DAC can have different sampling rate from ADC
What needs to be done before joining a fitting and pipe using socket fusion?
Answers
Before joining a fitting and pipe using socket fusion, it is important to ensure that both the fitting and pipe are clean and free from any debris or contaminants. Additionally, the correct size fitting and pipe must be used to ensure a proper fit.
Socket fusion is a method of joining plastic pipes and fittings together by heating the material and then pressing the heated ends together to form a strong bond. Before the socket fusion process begins, it is important to prepare both the fitting and pipe by ensuring they are clean and free from any debris or contaminants.
This can be achieved by using a specialized cleaning tool or wiping the surfaces with a clean cloth. Additionally, it is crucial to use the correct size fitting and pipe to ensure a proper fit and prevent any leaks or issues in the future. Proper preparation of the materials is crucial to ensuring a successful socket fusion joint.
For more questions like Socket click the link below:
https://brainly.com/question/29658250
#SPJ11
elements of parallel computing
Answers
\(\huge{\orange}\fcolorbox{purple}{cyan}{\bf{\underline{\green{\color{pink}Answer}}}} \)
Elements of parallel computing:Computer systems organization. Computing methodologies. General and reference. Networks. Software and its engineering.Theory of computation.Using SPICE, given that a scan is targeting (IP1, port1), (IP2, port2), and (IP2, port3), and given that the probability that any port is targeted for scan is 0.1, determine the anomaly score for the combination. (Note: Here, take log to the base 10.)
A. 3
B. 0.3
C. 0.001
D. -3
E. None of the above
Answers
The anomaly score for the combination (IP1, port1), (IP2, port2), and (IP2, port3) is -3. (Option D)
To determine the anomaly score for the given combination using SPICE, let's follow these step-by-step explanations:
Step 1: Calculate the probability of the combination being targeted:
Since the probability of any port being targeted for scan is 0.1, the probability of a specific combination (IP1, port1), (IP2, port2), and (IP2, port3) being targeted can be calculated by multiplying the individual probabilities together. In this case, the combination has three ports, so the probability is (0.1)^(3) = 0.001.
Step 2: Take the logarithm (base 10) of the probability:
To calculate the anomaly score, we need to take the logarithm (base 10) of the probability obtained in Step 1. Taking the logarithm helps to compress the probability value and make it more suitable for scoring anomalies. So, log10(0.001) = -3.
Step 3: Determine the anomaly score:
The anomaly score is the result obtained from Step 2. In this case, the anomaly score is -3.
Therefore, the correct answer is D. -3.
In summary, to calculate the anomaly score for the given combination using SPICE, we calculated the probability of the combination being targeted by multiplying the individual port probabilities together. Then, we took the logarithm (base 10) of the probability to obtain the anomaly score. The anomaly score for the combination was found to be -3.
To learn more about anomaly click here: brainly.com/question/30397891
#SPJ11
Define chart name the different types of charts explain any three types of charts
Answers
Answer:
There are several different types of charts and graphs. The four most common are probably line graphs, bar graphs and histograms, pie charts, and Cartesian graphs. They are generally used for, and are best for, quite different things. ... Pie charts to show you how a whole is divided into different parts.
#carryonlearning
With a ________ in the brake system, any fluid leak could mean the whole braking system fails.
Answers
With a tandem master cylinder in the brake system, any fluid leak could mean the whole braking system fails.
What is a braking system?A braking system is known to be a kind of a mechanical device that tend to assist a vehicle in the accelerating or in the decelerating of the speed of the system.
It is one that is known to inhibits motion by taking in energy from the system. Therefore, With a tandem master cylinder in the brake system, any fluid leak could mean the whole braking system fails.
Learn more about brake system from
https://brainly.com/question/23879105
#SPJ1
With a ______________________ in the brake system, any fluid leak could mean the whole braking system fails.
• tandem master cylinder
• single-piston master cylinder
• quick take-up master cylinder
• None of the answers listed
Water is pumped from a lake to a storage tank 18 m above at a rate of 70 L/s while consuming 20.4 kW of electric power. Disregard any frictional losses in the pipes and any changes in kinetic energy, determine (a) the overall efficiency of the pump-motor unit (5-point), and (b) the pressure difference between the inlet and the exit of the pump (5-point).
Answers
Part A
For each method,a function to model the expected number of plants for each year
Part B
Use the Functions to Find the expected number of plants in 10 years for each method.
Part C
) A regenerative vapor power cycle has three turbine stages with steam entering the first stage at 2500 lbf/in2 , 1100 o F. The cycle has two feedwater heaters, a closed feedwater heater using extracted steam at 500 lbf/in2 and an open feedwater heater operating at 50 lbf/in2 . Saturated liquid condensate drains from the closed feedwater heater at 500 lbf/in2 and passes through a trap into the open heater. The feedwater leaves the closed heater at 2500 lbf/in2, 478 o F. Saturated liquid leaves the open heater at 50 lbf/in2 and the condenser pressure is 1 lbf/in2 . For isentropic operation of the turbines and pumps, determine the efficiency of this cycle.
Answers
Answer:
do the wam wam
Explanation:
The steel shaft has a diameter of 40 mm and is fixed at its ends A and B . If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa.
Q6/
Answers
Answer:
See explanation.
Explanation:
Since no figure was given I solved a problem that was similar to the one you described that I worked in my mechanics of materials class. The method should be very similar for your figure. See attached image for my work.
If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.
What we need to perform?We need to perform a two step process to obtain the maximum shear stress on the shaft. For the solid shaft,
P=2×pi×N×T/60 or T=60×p/2×pi×N
Where P=power transmitted by the shaft=50×10³W
N=rotation speed of the shaft in rpm=730rpm
Pi=3.142
T is the twisting moment
By substituting the values for pi, N and P, we get
T=654Nm or 654×10³Nmm
Also, T=pi×rho×d³/16 or rho=16×T/pi×d³
Where rho=maximum shear stress
T = twisting moment=654×10³Nmm
d= diameter of shaft= 40mm
By substituting T, pi and d
Rho=52Mpa
b. For a hollow shaft, the value for rho is unknown
T=pi×rho(do⁴-di⁴/do)/16
Rho=T×16×do/pi×(do⁴-di⁴)
Where
T= twisting moment=654×10³Nmm gotten above
do=outside shaft diawter=40mm
di= inside shaft diameter =30mm
Pi=3.142
Substituting values for pi, do, di and T.
Rho=76Mpa
Therefore, If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.
Learn more about shaft on:
https://brainly.com/question/30541080
#SPJ2