Raul doesn’t feel like he needs to write down events that will happen months from now. Explain to him why it is important to use the different types of calendars.

Answer:

desire to make money that motivates people to produce and sell goods and services. ... rivalry among producers or sellers of similar goods and services to win more business. economic efficiency. wise use of available resources so that costs do no exceed benefits.

Answer:

A

Explanation:

Answer:

my friend here justin

Explanation:

hes already taken

Answer:

  3

Explanation:

3 broken wires in one strand in one lay are cause for removal from service.

Answer:

The maximum tonnage required for compacting the tantalum slug with a diameter of 88 mm was determined to be 907.4 kN.

Given the diameter of a tantalum slug as 88 mm, the maximum tonnage required to compact the tantalum slug is determined as follows;

Consider the cross-sectional area (A) of the tantalum slug, which is given by:

A = π/4 (d²)

A = π/4 (88 mm)²

= 6,049 mm²

Also, the maximum compressive stress (σ) required for compacting the tantalum slug is known to be 150 MPa.

Furthermore, the formula for the maximum tonnage required for compacting the tantalum slug is given as:

T = σA

Where T is the maximum tonnage and σ is the maximum compressive stress.

Finally, substituting the values, the maximum tonnage required for compacting the tantalum slug is given as:

T = σA

T = (150 MPa) (6,049 mm²)

  = 907,350 N

Therefore, the maximum tonnage required to compact a tantalum slug with a diameter of 88 mm is 907,350 N or approximately 907.4 kN.

To know more about diameter, visit:

https://brainly.com/question/33294089

#SPJ11

Answer:

The things that you should consider in the planning and design of social housing are:

1. Physical requirements.

2. User Experience.

3. Time and Money.

4. Context/Setting.

5. Upkeep.

Hope this helps you!

Please mark me as a brainliest.

The numbers of arrangements are:

1) i) 21,657,600

ii)   2,614,656,000

2) i) 48.

  ii) 72.

 iii) 12.

i. If the books in each particular subject must all stand together, we can treat each group of books (statistics books, physics books, and economics books) as single entities.

Therefore, we have 3 groups of books to arrange.

The number of arrangements within each group can be calculated as the factorial of the number of books within that group. So, for the statistics books (6 books), there are 6! = 720 possible arrangements. For the physics books (7 books), there are 7! = 5,040 possible arrangements. And for the economics books (3 books), there are 3! = 6 possible arrangements.

To calculate the total number of arrangements, we multiply the number of arrangements within each group together:

Total arrangements = 720 * 5,040 * 6 = 21,657,600

ii. If only the statistics books must stand together, we can treat the group of statistics books as a single entity. Therefore, we have 2 groups to arrange: the statistics books and the rest of the books (physics and economics books).

The number of arrangements within the statistics books group is still 6! = 720.

The number of arrangements within the group of the rest of the books can be calculated as the factorial of the total number of books in that group, which is 7 + 3 = 10 books. So, there are 10! = 3,628,800 possible arrangements within the group of the rest of the books.

To calculate the total number of arrangements, we multiply the number of arrangements within each group together:

Total arrangements = 720 * 3,628,800 = 2,614,656,000

2?

To calculate the number of permutations satisfying the given conditions for the word "WHITE," we can analyze the arrangement of its letters.

The word "WHITE" consists of 5 letters, namely W, H, I, T, and E.

i. Begins with a consonant:

In this case, we need to calculate the number of permutations where the first letter is a consonant. There are 2 consonants in the word "WHITE" (W and H). Therefore, there are 2 options for the first letter, and for the remaining 4 letters, we have 4! = 24 permutations. Thus, the total number of permutations that begin with a consonant is 2 * 24 = 48.

ii. Ends with a vowel:

Similarly, we need to determine the number of permutations where the last letter is a vowel. There are 3 vowels in the word "WHITE" (I, E, and E). Therefore, there are 3 options for the last letter, and for the remaining 4 letters, we have 4! = 24 permutations. Thus, the total number of permutations that end with a vowel is 3 * 24 = 72.

iii. Has a consonant and vowels alternating:

For this condition, we need to consider the pattern of consonant-vowel-consonant-vowel-consonant. We have 2 consonants and 3 vowels in the word "WHITE." So, we can choose one of the consonants for the first position in 2 ways, then one of the vowels for the second position in 3 ways, the remaining consonant for the third position in 1 way, the remaining vowel for the fourth position in 2 ways, and finally, the remaining consonant for the fifth position in 1 way. Therefore, the total number of permutations with consonants and vowels alternating is 2 * 3 * 1 * 2 * 1 = 12.

Learn more about combinations at:

https://brainly.com/question/11732255

#SPJ4

A regulator is required on a nitrogen cylinder in order to reduce very high pressure within the gas cylinder to a safer pressure.

A regulator can be defined as a mechanical device that is designed and developed to ensure that a controlled amount of nitrogen gas is supplied from a gas cylinder.

This ultimately implies that, a regulator is required on a nitrogen cylinder in order to reduce very high pressure within the gas cylinder to a safer pressure.

Read more on regulator here: https://brainly.com/question/4652901

#SPJ1

Screws that join clothes dryer exhaust ducts may protrude a maximum of 1/8 inch into the inside of the duct.

When connecting clothes dryer exhaust ducts, it is essential to ensure proper installation to maintain efficient airflow and minimize potential hazards. Screws used to join these ducts should not extend more than 1/8 inch into the inside of the duct.

This limit helps prevent lint buildup, which can lead to clogs, reduced airflow, and potential fire hazards. By adhering to this guideline, the risk of lint accumulation and blockages is minimized, promoting safer and more efficient dryer operation.

Learn more about Clothes dryer

brainly.com/question/13841768

#SPJ11

The latent heat of vaporization of water (ΔH) is approximately 2,260,000 J/kg.

The power required to boil the water in the copper pan is approximately 59,150 watts.

To estimate the power required to boil the water in the copper pan and determine the evaporation rate, we need to consider the heat transfer occurring between the pan and the water.

Power required to boil the water:

The power required can be calculated using the formula:

P = m * ΔH / t

Where:

P is the power (in watts).

m is the mass of water (in kilograms).

ΔH is the latent heat of vaporization of water (in joules per kilogram).

t is the time required to boil the water (in seconds).

First, we need to determine the mass of water in the pan. Assuming the pan is filled to a certain height, we can calculate the volume of water and convert it to mass using the density of water.

Given:

Diameter of the pan (D) = 200 mm = 0.2 m

Height of water (h) (assumed) = let's say 100 mm = 0.1 m

Density of water (ρ) = 1000 kg/m³ (approximately)

The volume of water (V) can be calculated using the formula for the volume of a cylinder:

V = π * (D/2)² * h

V = 3.14 * (0.2/2)² * 0.1 ≈ 0.0157 m³

The mass of water (m) can be calculated using the formula:

m = V * ρ

m = 0.0157 * 1000 ≈ 15.7 kg

Assuming the water is initially at room temperature (25°C), the temperature difference (ΔT) is:

ΔT = boiling temperature - initial temperature

ΔT = 100°C - 25°C = 75°C = 75 K

Now, let's assume it takes 10 minutes (600 seconds) to boil the water.

P = m * ΔH / t

P = 15.7 * 2,260,000 / 600

P ≈ 59,150 watts

Evaporation rate:

The evaporation rate (E) can be calculated using the formula:

E = m / t

E = 15.7 / 600

E ≈ 0.0262 kg/s

Therefore, the evaporation rate is approximately 0.0262 kg/s.

Ratio of surface heat flux to critical heat flux:

The ratio of surface heat flux to critical heat flux (q/q_c) can be determined using the formula:

q/q_c = (T_s - T_sat) / (T_c - T_sat)

Where:

T_s is the surface temperature of the pan (in °C).

T_sat is the saturation temperature of the boiling water at the prevailing pressure (in °C).

T_c is the critical temperature at which the critical heat flux occurs (in °C).

To find the pan temperature required to achieve the critical heat flux, we need to know the critical temperature for the specific system.

Pan temperature required to achieve the critical heat flux:

The critical heat flux and its associated temperature depend on factors such as the properties of the pan, water flow conditions, and pressure. Without specific information on these factors, it is challenging to determine the exact pan temperature required to achieve the critical heat flux.

To accurately determine the critical heat flux and the associated pan temperature, further analysis and experimental data specific to the

Know more about latent heat here:

https://brainly.com/question/23976436

#SPJ11

Answer:

Zero 1 = -1

Zero 2 = -3

Pole 1 = 0

Pole 2 = -2

Pole 3 = -4

Pole 4 = -6

Gain = 4

Explanation:

For any given transfer function, the general form is given as

T.F = k [N(s)] ÷ [D(s)]

where k = gain of the transfer function

N(s) is the numerator polynomial of the transfer function whose roots are the zeros of the transfer function.

D(s) is the denominator polynomial of the transfer function whose roots are the poles of the transfer function.

k [N(s)] = 4s² + 16s + 12 = 4[s² + 4s + 3]

it is evident that

Gain = k = 4

N(s) = (s² + 4s + 3) = (s² + s + 3s + 3)

= s(s + 1) + 3 (s + 1) = (s + 1)(s + 3)

The zeros are -1 and -3

D(s) = s⁴ + 12s³ + 44s² + 48s

= s(s³ + 12s² + 44s + 48)

= s(s + 2)(s + 4)(s + 6)

The roots are then, 0, -2, -4 and -6.

Hope this Helps!!!

To calculate FTE (Full-Time Equivalent) for indoor water use, you typically need the following factors:

   The amount of water used in the baseline design case: This refers to the estimated amount of water that would be used by the building's occupants under normal operating conditions. This can be based on factors such as the number of occupants, their behavior, and the types of fixtures installed in the building.

   The flush and flow rates of fixtures: This refers to the rate at which water is used by various fixtures in the building, such as toilets, faucets, and showers. The flow rates can be measured in gallons per minute (GPM) or liters per minute (LPM), and the flush rates can be measured in gallons per flush (GPF) or liters per flush (LPF).

   The type of building occupant (full time, part time, transient): This refers to the nature of the building's occupants and their expected water usage patterns. For example, full-time occupants may use more water than part-time or transient occupants.

   Hours worked per week: This refers to the number of hours that the building's occupants are expected to be on site and using water. This factor can be used to estimate the amount of water used during different times of day and days of the week.

Building density is not typically a factor in calculating FTE for indoor water use, as it is more relevant for outdoor water use.

In a NOR gate, the P-type transistors are connected in parallel, while the N-type transistors are connected in series.

This configuration allows for the logical operation of the NOR gate, where the output is low (0) only when all the inputs are high (1). By connecting the P-type transistors in parallel, any high input will cause at least one of them to conduct, pulling the output low.

On the other hand, the N-type transistors are connected in series, so if any input is high, at least one of them will not conduct, resulting in low output. Any high input OR gate ensures a high output. A high output from the XOR gate is guaranteed by any difference in the inputs. A low output from the XNOR gate is guaranteed by any difference in the inputs.

Learn more about NOR gate here:

https://brainly.com/question/28238514

#SPJ4

The value of the destination register r1 after the instruction MOV r1, pc completes will be the address of the next instruction to be executed, which is the memory address 0x0800016A.

What is register?
In computer architecture, a register is a small, high-speed memory storage location within a CPU (Central Processing Unit) that can be used to store and quickly access data that is currently being processed by the CPU.

Registers are used to hold operands, instructions, memory addresses, and other data used by the CPU during the execution of a program. Registers are typically built into the CPU chip and can be accessed much faster than other types of memory, such as RAM.


In ARM assembly language, pc is the program counter register, which contains the address of the current instruction being executed. So, the MOV r1, pc instruction copies the current value of the program counter register to the r1 register.
Since the MOV r1, pc instruction itself occupies 4 bytes of memory, the address of the next instruction to be executed will be 4 bytes ahead of the current instruction. Therefore, the value of r1 will be 0x0800016A.

To know more about memory visit:
https://brainly.com/question/30765530
#SPJ1

The objective is to obtain shear-force and bending-moment functions, draw their diagrams for a loaded beam, and determine the maximum magnitude of the bending moment and its location by analyzing the beam's loading conditions.

The task requires obtaining the shear force and bending moment functions for a loaded beam and drawing their diagrams. Additionally, the goal is to find the maximum magnitude of the bending moment and its corresponding location.

This involves analyzing the beam's loading conditions, such as point loads, distributed loads, and moments, and applying the principles of equilibrium and beam bending theory.

By calculating the shear forces and bending moments at different sections of the beam, the functions can be determined. Drawing the shear-force and bending-moment diagrams helps visualize the variations along the beam's length.

Finally, locating the maximum bending moment and determining its magnitude is crucial for assessing the structural integrity of the beam.

Learn more about shear-force

brainly.com/question/30763282

#SPJ11

The purification of a wide range of materials involves the use of distillation, a significant commercial procedure.

The purification of a wide range of materials involves the use of distillation, a significant commercial procedure. However, it would definitely be helpful to clarify the terms that describe the procedure and related qualities before we start a discussion of distillation.

Although you may be familiar with several of these terms, you might not be aware of their precise definitions. Let's start by outlining the procedure for changing a material from its condensed phase to its gas phase. This process is known as sublimation for solids and vaporization for liquids. Both procedures call for heat.

To know more about distillation click here:

https://brainly.com/question/29037176

#SPJ4

The defined class in the given code is a generic class named "StudentIDs" with a type parameter "TheType".

In the code, "public class StudentIDs" indicates that it is a generic class named "StudentIDs" with a type parameter "TheType". The class has two private fields, "item1" and "item2" of the same generic type "TheType".

To know more about constructor visit:

https://brainly.com/question/31171408

#SPJ11

Answer

The skateboarder applies pressure to the trucks and gives/releases pressure on the levers. Second, the wheels and the axles are also examples of simple machines. They help the skater ride, spin, grind, and do a bunch of other radical movements on a skateboard.:

Explanation:

Answer:

(The diagram of the question is given in Attachment 1)

The largest load which can be applied is:

P=67.62 kN

Explanation:

All the forces are shown in the diagram in Attachment 2.

∑ F(y)= 0 (Upwards is positive)

\(F_{BC}sin\theta-P=0\\\frac{4}{5}F_{BC} - P=0\\F_{BC}=\frac{5}{4}P\\\\F_{BC}=1.25P\)

∑ F(x)= 0 (Towards Right is positive)

\(N_{a-a} - F_{BC}cos\theta=0\\N_{a-a}-1.25P(\frac{3}{5})=0\\N_{a-a}=0.75P\)

∑ F(y)= 0 (Upwards is positive)

\(F_{BC}sin\theta- V_{a-a}= 0\\(\frac{4}{5})1.25P-V_{a-a}=0\\V_{a-a}=P\)

The cross sectional area of a-a:

\(A_{a-a}= \frac{(0.026)(0.026)}{3/5}\\A_{a-a}= 1.127\cdot10^{-3}\)

σ = N(a-a)/A(a-a)

Substitute values:

\(160\cdot10^6=\frac{0.75P}{1.127\cdot10^{-3}}\\P=240.42\cdot10^3 N\\P=240.42 kN\)

Т= V(a-a)/A(a-a)

Substitute values:

\(60\cdot10^6=\frac{P}{1.127\cdot10^{-3}}\\P=67.62\cdot10^{3}N\\P=67.62kN\)

To satisfy both the condition, we have to choose the lower value of P.

P=67.62 kN

Answer:

See explanation.

Explanation:

Since no figure was given I solved a problem that was similar to the one you described that I worked in my mechanics of materials class. The method should be very similar for your figure. See attached image for my work.

If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.

We need to perform a two step process to obtain the maximum shear stress on the shaft. For the solid shaft,

P=2×pi×N×T/60 or T=60×p/2×pi×N

Where P=power transmitted by the shaft=50×10³W

N=rotation speed of the shaft in rpm=730rpm

Pi=3.142

T is the twisting moment

By substituting the values for pi, N and P, we get

T=654Nm or 654×10³Nmm

Also, T=pi×rho×d³/16 or rho=16×T/pi×d³

Where rho=maximum shear stress

T = twisting moment=654×10³Nmm

d= diameter of shaft= 40mm

By substituting T, pi and d

Rho=52Mpa

b. For a hollow shaft, the value for rho is unknown

T=pi×rho(do⁴-di⁴/do)/16

Rho=T×16×do/pi×(do⁴-di⁴)

Where

T= twisting moment=654×10³Nmm gotten above

do=outside shaft diawter=40mm

di= inside shaft diameter =30mm

Pi=3.142

Substituting values for pi, do, di and T.

Rho=76Mpa

Therefore, If it is subjected to the couple determine the maximum shear stress in regions AC and CB of the shaft. G st = 75 GPa. Than the answer will be 52Mpa.

Learn more about shaft on:

https://brainly.com/question/30541080

#SPJ2

Answer:

Yes good job

Explanation:

Answer:

Yes

Explanation:

Yes, the factored form of 12x^2-11x-5 is (3x+1)(4x-5)

Using the de-goodman criteria and a design factor of 1.5, the shaft diameter will be 0.187 inch.

To find the shaft diameter, let's use the equation below:

`σa/σw = [1/(Ka)] [(E/2E')^(1/m)] `

We know that the load on the shaft is 50,000 lbf.

Using this, we can calculate the alternating stress on the shaft:

`σa = load / (π * (d^2)/4) `

where d is the shaft diameter, we need to find.

Alternating stress `σa = 50,000/(πd^2/4) = 64,041/d^2`

Factor `n = 1/1.5 = 0.67`

For the material of the shaft, Ka and m values can be obtained using Soderberg criterion:

`σw = (σm/Na)(σf/Nf) `where σm is the mean stress, Na and Nf are empirical factors, and σf is the fatigue strength at a specific number of cycles.

The ultimate strength of the shaft material is given as 140,000 psi.

The empirical factors Na and Nf can be calculated as:

`Na = (σm + σa)/σf and Nf = 2E6/10^6 = 2`

Substituting the values we get, `Na = (0 + 64041/d^2) / 60000 = 1.067/d^2 and Nf = 2`

We can now calculate σw using Soderberg criterion:

`σw = (σm/Na)(σf/Nf) `Mean stress σm can be taken as half of ultimate strength σut = 70000 psi.

Then, `σw = (70000/1.067d^2)(60000/2) = 17630/d^2`

Using De-Goodman criteria, substituting the values of σa/σw and factor m, we get:

`1.5 = [1/Ka] [(E/2E')^(1/m)] = [1/Ka] [(29*10^6)/(2 * 60,000)^(1/3)] `

We can simplify the above equation by substituting Ka and solving for the shaft diameter `d`. `d = 0.187 inch`

Hence, the shaft diameter is 0.187 inch.

Learn more about De goodman equation at

https://brainly.com/question/15201186

#SPJ11

This program allows users to enter scores, calculates the average score, and determines the number of scores above or equal to the average, as well as the number of scores below the average.

Here is the program that reads an unspecified number of scores and determines how many scores are above or equal to the average and how many scores are below the average:

## Initializing the scoreList with an empty listscoreList = []while True:    ## Get the input from the user    score = float(input("Enter a new score or negative number to exit: "))    ##

Check whether the user wants to exit    if score < 0:        break    ## Add the score to the list    scoreList.append(score)## Get the total number of scores enteredtotalScores = len(scoreList)##

Get the total sum of scorestotalSum = sum(scoreList)## Calculate the average scoreaverage = totalSum / totalScores##

Initialize the counters for scores above and below the averagescoresAbove = 0scoresBelow = 0##

Loop through the score list and count the number of scores above and below the averagefor score in scoreList:    if score >= average:        scoresAbove += 1    else:        scoresBelow += 1## Print the resultprint(f"Total scores entered: {totalScores}")print(f"Average score: {average:.2f}")print(f"Number of scores above or equal to the average: {scoresAbove}")print(f"Number of scores below the average: {scoresBelow}")##

End of the program Output:

Learn more about program : brainly.com/question/26134656

#SPJ11

Answer:

wat?

Explanation:

The question should be labeled in the psychology section, but what I assume the question means is some sort of paradoxical reverse psychology method of braincell loss. Even photosynthesis doesn't understand what it means. The question probably is what is the question, not that there's no help.

Hope this helps (a little)!

Industrial fixed staircases must be at least 22 inches wide.

The minimum permitted by most construction rules, staircases in America are normally 36 inches wide. There is still enough space to allow for railings, which can take up a few inches, even when not all 36 inches are used.

For one-way traffic, stairways must be 0.90 meters wide, and for two-way traffic, they must be 1.50 meters wide. The riser and tread distances for indoor stairs should be 0.28 m and 0.35 m, respectively. The maximum riser and minimum tread sizes for outdoor stairs should be 0.15 m and 0.30 m, respectively.

To know more about staircases visit:-

https://brainly.com/question/30561625

#SPJ4

A sampled signal is a representation of a continuous signal that has been converted into a digital form through sampling, quantization, and encoding. Microprocessors and microcontrollers utilize sampled signals for control systems, as contactors are not suitable for high frequencies.

The sampled signal in French is called "le signal échantillonné." When dealing with a microprocessor or microcontroller control system, they give a sampled signal to the output.

The interface between the controller and system is necessary because contactors cannot be used due to their inability to handle high frequencies (and their function with 0 stop and 24 v run). However, the sampled signal has a lot of values between 0 and 5v.

A sampled signal is a representation of a continuous signal. A sampled signal is created by converting an analog signal into a digital signal by the process of sampling. The continuous-time signal is first sampled, then quantized, and finally encoded. In general, it's the number of values taken by the signal over a specific period of time.

A microprocessor is an integrated circuit that functions as the central processing unit (CPU) of a computer system. It's also known as a computer processor. It's a device that is programmed to execute arithmetic or logical operations, which are input as raw data and then transformed into usable information through software applications.

A microcontroller, like a microprocessor, is an integrated circuit that includes a processing unit, memory, and input/output (I/O) peripherals. The distinction between a microcontroller and a microprocessor is that a microcontroller is a complete computer system on a single chip.

A contactor is an electrical device used to control a load circuit in a power system. A contactor is a switch that is controlled by a low-power circuit. When a contactor is energized, its contacts close, allowing current to flow to the load. When a contactor is de-energized, its contacts open, stopping current flow to the load.

Learn more about Microprocessors : brainly.com/question/29243062

#SPJ11

Tensile strength and yield strength of materials can vary depending on the specifics of the manufacturing process, exact chemical composition, and the treatment of the material. They are usually provided by the manufacturer in a materials property datasheet. I don't have real-time access to such specific databases or proprietary materials databases to provide these values.

However, I can give you a general idea based on typical values for similar materials:

(a) UNS G10200 hot-rolled steel (also known as AISI 1020 steel):

- Tensile Strength: around 420 MPa

- Yield Strength: around 350 MPa

(b) SAE 1050 cold-drawn steel:

- Tensile Strength: around 690 MPa

- Yield Strength: around 600 MPa

(c) AISI 1141 steel quenched and tempered at 540°C:

- Tensile Strength: around 760 MPa

- Yield Strength: around 690 MPa

(d) 2024-T4 aluminum alloy:

- Tensile Strength: around 470 MPa

- Yield Strength: around 325 MPa

(e) Ti-6Al-4V annealed titanium alloy:

- Tensile Strength: around 900 MPa

- Yield Strength: around 880 MPa

These are general values and actual values can vary based on exact processing conditions and slight differences in alloying elements. For precise values, you should refer to the material's datasheet provided by the manufacturer or a reliable materials database.