Question 10 of 10
2 Points
Which of the following best describes how the Federal Reserve Bank helps
banks during a bank run?
A. The Federal Reserve Bank acts as an insurance company that
pays customers if their bank fails.
B. The Federal Reserve Bank regulates exchanges to prevent the
demand for withdrawals from rising above the required reserve
ratio.
C. The Federal Reserve Bank has the power to take over a private
bank if customers demand too many withdrawals.
D. The Federal Reserve Bank can provide a short-term loan to banks
to prevent them from running out of money.
Answers
Answer:
D. The Federal Reserve Bank can provide a short-term loan to banks
to prevent them from running out of money.
Explanation:
A bank run occurs when a large number of depositors withdraw their deposits simultaneously from a bank.
As the number of withdraws increases, the available cash in the bank decreases until a point that the bank can't give depositors their money.
In these situations, The Federal Reserve Bank acts as a lender of last resort that helps to reinforce the effect of deposit insurance, and to reassure bank customers that they will not lose their money.
Related Questions
A gold necklace has a volume of 2 cubic centimeters and a mass of 38 grams. What is its density?
Answers
Answer:
76
Explanation:
38 x 2 = 76
76
Explanation:
38 x 2=76
Which statement describes an example of static electricity?
O A. When a light switch is flipped, electrons flow to a lightbulb.
O B. Positively and negatively charged particles are attracted to each
other.
O C. Wind turns a generator, causing electrons to flow into power lines.
O D. Electrons move from one end of a copper wire to another.
Answers
Positively charged and negatively charged particles of material are attracted by each other. Therefore, statement (B) is an example of static electricity.
What is static electricity?Static electricity can be described as an imbalance between the electric charges in an object, which is actually the imbalance between the positive and the negative charges on a body.
The imbalance in the charge is described the static electricity. The contact between solid objects is one of the most common causes of static electricity.
In static electricity, the movement of protons cannot be possible and the movement of electric charge is due to electrons. Electrons in materials are held loosely, so they can be easily exchanged via simple contact such as rubbing.
Such charges can be collected on the surface of a body until they find a to get discharged. The way to discharge is generally through a circuit. Static electricity is the electric field that is generated due to stationary charges. The electric charges on the surface involve which combine the static electricity on the material.
Learn more about Static electricity, here:
https://brainly.com/question/12791045
#SPJ5
Choose all the answers that apply.
Stars:
usually seem bright if they are close to Earth
are terrestrial bodies
use their own matter to create nuclear reactions
generate their own energy
are classified primarily by temperature
Answers
Answer:
use their own matter to create nuclear reactions
generate their own energy
are classified primarily by temperature
usually seem bright if they are close to Earth
Explanation:
The answers that apply for the stars are 1,2,4 and 5. Stars usually seem bright if they are close to Earth.
What is a star?A star is a heavenly body made up of a brilliant spheroid of plasma held together by gravity. The Sun is the closest star to Earth.
Many additional stars may be seen with the normal eye at night, but due to their great distance from Earth, they appear as stationary points of light in the sky.
The answers that apply for the stars are as follows;
1. Usually seem bright if they are close to Earth.
2. Stars are terrestrial bodies.
4. They generate their own energy.
5. Stars are classified primarily by temperature.
The answers that apply for the stars are 1,2,4 and 5.
To learn more about the stars, refer to the link;
https://brainly.com/question/24493066
#SPJ2
Which effect is created when two sound waves that are close in pitch
interact?
O A. Echoes
O B. Loudness
C. Beats
O D. Intensity
Answers
Answer:
C. Beats
Explanation:
When waves are interfering with each other, the sound is louder in some places and softer in others. As a result, we hear pulses or beats in the sound.
Answer:
beats
Explanation:
got it right
help with a length problem
Answers
Explanation:
Because if you're not measuring in inches you want to go the next one down other than inches which would be millimeters!(: hope this helps.
Answer:
B. Millimeters
Explanation:
Milliliters is a unit for volume
Millimeters are length, so its suitable for this.
Kilometers is also a unit used for length but its too big for a shoe measurement.
Kilograms is a unit for weight.
Which of the following forces has not changed Earth's surface?
folding
erosion
weathering
gravity
Answers
Answer:Gravity is the force among the options listed that has not directly changed Earth's surface.
Explanation:
Gravity is a fundamental force that acts on all objects with mass, including the Earth itself, but it does not cause changes or modifications to the Earth's surface features. Instead, gravity influences the movement of materials and the shape of the Earth's surface by exerting a pulling force on objects. On the other hand, folding, erosion, and weathering are all processes that directly contribute to shaping
Ty has two pet mice. One mouse has the gene for black fur color and the other mouse has the gene for white fur color. The female mouse is pregnant now, and Ty wonders what color or colors the baby mice will be. Read each offspring description phrase below and select the correct pattern of dominance for each. ____ all white fur offspring ____ all gray fur offspring ____ all black fur offspring ____
all black and white fur offspring 1.
codominance 2.
black fur allele dominant 3.
white fur allele dominant 4. incomplete dominance
Answers
Answer:
Ty has two pet mice. One mouse has the gene for black fur color and the other mouse has the gene for white fur color. The female mouse is pregnant now, and Ty wonders what color or colors the baby mice will be. Read each offspring description phrase below and select the correct pattern of dominance for each.
___ all white fur offspring, white fur in this case is dominant
___ all gray fur offspring, this is incomplete dominant.
___ all black fur offspring, this is black fur dominantice
___ all black and white offspring, this is codominance .
Explanation:
Incomplete dominance: Incomplete dominance is when a dominant allele, or form of a gene, does not completely mask the effects of a recessive allele, and the organism's resulting physical appearance shows a blending of both alleles. It is also called semi-dominance or partial dominance.
Codominance: Codominance is a relationship between two versions of a gene. Individuals receive one version of a gene, called an allele, from each parent. If the alleles are different, the dominant allele usually will be expressed, while the effect of the other allele, called recessive, is masked.
Ty keeps two mouse pets. One mouse possesses the gene for black fur, while the other mouse possesses the gene for white fur. Ty wonders what colour or colours the baby mice will be now that the female mouse is pregnant. Select the appropriate pattern of dominance for each offspring by reading the offspring description phrase below.
What pattern of dominance for each?Incomplete dominance: When a dominant allele, or form of a gene, cannot fully suppress the effects of a recessive allele, the organism's physical characteristics reflect a blending of both genotypes.
Codominance: Codominance is the association of two genetic variants. A person inherits one allele—also known as a gene allele—from each parent. When the alleles are different, the dominant allele typically manifests, while the effect of the other allele—known as the recessive allele—is concealed.
Therefore, All white fur offspring, white fur in this case is dominant. This is incomplete dominant since the progeny are all gray fur.All black fur offspring, this is black fur dominant ice. This is codominance—all the kids are black and white.
Learn more about dominance here:
https://brainly.com/question/21219243
#SPJ2
What would happen to the digestion process if enzymes were not present
Answers
Answer: It would take 2.3 billion years for the biological reaction without the presence of enzymes. It’s because, without them, your body can’t break down foods so that nutrients can be fully absorbed. Every organ, every tissue, and every 100 trillion cells in our body rely upon the reaction of metabolic enzymes and their energy component.
Explanation:
I hope this helps
Without enzymes, the body would not be able to break down complex carbohydrates, proteins, and fats into their component molecules. This means that these nutrients would not be absorbed by the body and would be excreted as waste.
Additionally, the lack of enzymes would make it difficult for the body to digest and absorb vitamins and minerals. This could lead to malnutrition and other health problems over time.
Overall, the absence of enzymes from the digestive process would severely impair the body's ability to extract nutrients from food and could have negative consequences for overall health and well-being.
BRAINLIEST!!!
YOU HAVE 5 MINUTES!!!!
Design an easy do-it-yourself compost bin that can be put
together at home. You can describe it, draw and label it, or both!
Include the following in your design:
• drawing or description of design
• materials used for the bin
• size of the bin
• substances used to fill it
• household items that can go in it
• how long it takes before it is ready
• how you use the compost
2)
Compost bin design: Add these household items to
your compost bin:
Compost is ready to use in this
much time:
Use your compost this way:
Answers
Answer:
Explanation: COMPOST BIN
WHAT IS A COMPOST BIN?
A compost bin is a container into which you place organic waste to turn into compost (organic material) over time.
Most compost bins are designed to hasten the decomposition of organic matter through proper aeration and moisture retention. With the proper combination of air and moisture, ideal conditions are produced for the activity of aerobic organisms responsible for the high temperatures that transform the organic materials into compost
Read on to find out how to start a compost bin, DIY compost bin ideas, and more tips for beginners.
The decomposition process will eventually take place over time in a compost "pile" or "heap," even without any housing to contain the matter. However, a compost bin is worth it because it helps speed up decomposition and keeps the area neat. Some bins are continuous, meaning you can keep adding waste to them, while others create batches of compost with a set mix of ingredients you add all at once. Depending on the style of compost bin you choose, bins can also have the advantage of making it harder for rats to get at your compost. This is true of the tumbler type, for example.
CHOOSING THE RIGHT BIN
Select the right bin for your composting needs. You can make an inexpensive compost container out of almost any container or material. Some ideas include:
Plastic storage container
Plastic bucket
Trash cans
Straw bales
Lumber
Branches harvested from the woods
Stone
Cinder blocks
Wire fencing
Ceramic (also popular for a kitchen countertop compost bin)
The best bin, however, is one you can easily turn or rotate consistently to control odors and make sure all the materials decompose. This is especially important for aerobic composting (more information below). A tumbler composting bin is pricey, but you can DIY one from barrels and sawhorses. You can turn compost with a rake or shovel in a non-rotating bin, it just takes more labor to do so.
Pls, mark as brainlist
NO MEAT OR BREAD type foods- artificial/processed/attracts animals. Even buying a compost off amazon is a great idea because most human trash every year can be composted. Hope this helps :)
Keep some moister in it and make sure it gets sun. If bugs get in it, not a big deal. As well, if stuff rots, it’s ok that’s normal.
A meteor falls toward Earth's surface. Given that the acceleration due to
gravity is 9.8 m/s^2, what is the meteor's potential energy if it has a mass of 10
kg at an altitude of 400 m?
O A. 408 J
O B. 7,840,000 J
O C. 2J
O D. 39,200 J
Answers
Answer:
39,200J
Explanation:
just took the test
The meteor's potential energy if it has a mass of 10kg at an altitude of 400 m will be 39200 J
What is potential energy ?Potential Energy that depend upon the relative position of various parts of system . It is an energy possessed by an object by virtue of its position or configuration.
mass(m) = 10kg
g (acceleration due to gravity) = 9.8m/s^2
altitude(height (h)) = 400m
Meteor's Potential energy = m * g * h
= 10 * 9.8 * 400 = 39200 J
correct option will be a) 39200 J
learn more about Potential Energy :
https://brainly.com/question/14404024?referrer=searchResults
#SPJ3
h a l p me PlEaSe
gagagag i need elp0
Answers
Answer: -I think its a)
Answer:
I think B, if not then A
Explain what happens as the heart grows bigger.
Answers
Initially, the heart may grow bigger as a compensatory mechanism to try to keep up with increased demands for blood and oxygen. For example, if a person engages in regular exercise, their heart may enlarge to accommodate the increased demand for blood and oxygen to the muscles.
However, if the heart continues to grow over time, it can become less efficient at pumping blood and may develop structural abnormalities that increase the risk of heart failure, arrhythmias, and other complications.
In some cases, cardiac hypertrophy may be reversible if the underlying cause is treated, such as by managing high blood pressure or heart disease. However, if left untreated, hypertrophy can lead to irreversible damage to the heart muscle and may require more aggressive interventions, such as medication, surgery, or other medical procedures to manage the condition.
HURRY! Match each action with the charging method it demonstrates:
Rubbing a balloon on hair:
charging by
friction
conduction or induction
Touching a metal sphere with a negatively charged rod:
charging by
friction
conduction
induction
Moving a negatively charged rod near a metal sphere that is grounded:
charging of friction
conduction
or induction
Touching a metal sphere with a positive aluminum plate:
charging by friction
conduction
or induction
Answers
Answer: first one: a second: b
3rd: induction
4rth:conduction
Explanation:
i had these question
25 POINTS! Q1) A cinder block is pulled 0.50 meters to the right in 3 seconds. What is the block's average speed to the nearest hundredth of a meter per second (m/s)?
Q2) A skateboarder starts at the top of a halfpipe ramp, skates through the middle, and up the other side. Match the following to describe what is happening at each of the three points in the skater's movement.
Middle
End
Beginning
1.
Maximum kinetic energy
2.
Potential and kinetic energy is equal
3.
Maximum potential energy
Answers
The average speed of the blocks are 0.36 m/S.
Explanation:
Average speed is defined as the ratio of distance covered per unit time. So if it is said that blocks are pulled to 0.9 m in the right side. This means the blocks cover a distance of 0.9 m from the origin and that distance is covered in 2.5 s. Thus, the average speed can be calculated from the change in speed
with respect to time. As at time t = 0, the speed is
also zero, and at time t = 2.5 s, the speed will be
Speed =
0.9 = 0.36
2.5
Since, in this case, the speed is equal to the average speed of blocks. So the average speed of the blocks will be 0.36 m/s.
1.maximum kinetic energy minimum GPE
2.GPE is equal to kinetic energy
3 this time there will be maximum GPE
The transfer of energy by electromagnetic
#A. Radiation
#B. Convection
#C. Conduction
#D. Thermal energy
Answers
Answer:
Explanation:its thermal energy.There are three methods of thermal energy transfer: conduction, convection, and radiation
Complete the passage:
During the process of polymerization, __
combine by sharing electrons. This process forms a __
, which is made of repeating subunits. The resulting material is used in a variety of ways.
Answers
Help me please, ;) I could use it
Answers
Answer:
The solution(s) are in order with respect to the attachments
\(2.613\:\cdot10^5\) Joules ; 5. Adding the same amount of heat to two different objects will produce the same increase in temperature ; 2. Same speed in both ; 2. A
Explanation:
Diagram 1 ( Liquid Nitrogen ) : So as you can see, we want our units in Joules here, and can therefore multiply the mass of gaseous nitrogen and the latent heat of liquid nitrogen, to cancel the units kg, and receive our solution - in terms of Joules. Let's do it.
q ( energy removed ) = mass of nitrogen \(*\) latent heat of liquid nitrogen,
q = 1.3 kg \(*\) 2.01 \(*\) 10⁵ J / kg = \(1.3\:\cdot \:2.01\:\cdot \:\:10^5\) = \(10^5\cdot \:2.613\) = \(100000\cdot \:2.613\) = \(261300\) Joules = \(261.3\) kiloJoules = 2.613 \(*\) 10⁵Joules is the energy that must be removed
Diagram 2 : The same amount of heat does not necessarily mean the same increase in temperature for two different objects. The increase in temperature depends on the specific heat capacity of the substance. Therefore your solution is 5 ) Adding the same amount of heat to two different objects will produce the same increase in temperature.
Diagram 3 : The temperatures in both glasses are the same, and hence the molecules have the same average speed. Therefore your solution is 2 ) Same speed in both.
Diagram 4 : Glass A has more water molecules, and hence has more thermal energy. Your solution is 2 ) A.
Which of the following is the best reason for conserving oil resources?
A. Oil takes millions of years to form.
B. The conditions necessary to form oil will never happen again.
C. Oil is too expensive to extract.
D. Oil can be renewed in a human's lifetime.
Answers
This is because option B and D are not true and option C is irrelevant as it talks about conserving, therefore it has nothing to do with money.
Black to move and capture a hanging piece . Select the best move
A) Nxg3
B) Bxg3
C) Qxg5
Answers
Answer: A
Explanation:The Pawn moves directly forward, never backward or to the side. Pawns capture a piece that is one square diagonally forward. Though Pawns normally cannot move diagonally, this is the only way they capture.
Based on the information provided, the best move to capture a hanging piece would be: A) Nxg3
What would be the best move to capture a hanging piece ?Nxg3 would be the best move to capture a hanging piece.
This move involves sacrificing the knight to capture the hanging piece, which could be a bishop or pawn, depending on the position of pieces. After Nxg3, the opponent may capture the knight with different piece, but the player who made the move will have successfully captured the hanging piece.
However, it's important to note that the best move ultimately depends on the overall strategy of the player and the position of the other pieces on the board.
To know more about chess, refer
https://brainly.com/question/1401793
#SPJ1
What does it mean that energy cannot be created or destroyed?
A. Potential energy cannot be transformed into kinetic energy
B. Energy can only be transformed
C. Kinetic energy cannot be transformed into kinetic energy
D. Kinetic energy cannot be transformed into potential energy
Answers
Answer:
D
Explanation:
the reason this is right is because kinetic energy cannot become potential because kinetic is the when something is moving like a roller coaster going down a ramp but it can be converted into it
pls give brainlist pls me a lot
Energy cannot be created or destroyed, but it can be transferred and transformed. There are a number of different ways energy can be changed, such as when potential energy becomes kinetic energy or when one object moves another object.
The throwback PFD is which type?
Answers
Answer:a
Explanation:
The throwback PFD is a Type III PFD. This type of PFD is designed for calm, inland water, or where there is a good chance of quick rescue. THe correct option is C.
Type III PFDs will not turn unconscious wearers to a face-up position, so the wearer may have to tilt their head back to avoid turning face down.
Type III PFDs have the same minimum buoyancy as Type II PFD. Float coats, fishing vests, and vests designed for various water sports are examples of Type III PFDs. Some Type III PFDs are designed to be inflated upon entering the water.
Offshore life jackets of Type I are suited for all areas, notably open, choppy, or isolated regions where rescue may be delayed and offer the highest buoyancy. Near-shore vests of Type II PFDs are designed for calm inland water or situations where there is a good probability of prompt rescue. Throwable PFDs of Type IV are suitable for usage in open water as well as calm, heavily used inland waters where assistance is always available. Special-purpose PFDs known as Type Vs are made for activities like kayaking and whitewater rafting.
The throwback PFD is not a Type I PFD because it does not provide the most buoyancy and is not designed for all waters. It is not a Type II PFD because it is not intended for calm, inland water or where there is a good chance of quick rescue. It is not a Type IV PFD because it is not intended for calm, inland water with heavy boat traffic, where help is always present. It is not a Type V PFD because it is not designed for specific activities such as kayaking or whitewater rafting.
Therefore, the correct option is C. type III.
To learn more about PFDS click:
https://brainly.com/question/30098150
#SPJ6
Someone places a spoon in hot water. The spoon remains in the water till the water becomes room temperature, what temperature is the spoon handle?
Answers
Answer: Room temperature
Explanation: it makes sense (sorry if its wrong)
The strength of the gravitational attraction depends on the mass of the objects involved and on the distance between them. The gravitational force between two objects will be lowest in which of the following situations?
A. Both objects have small masses and are close together.
B. One object has a large mass, and the objects are close together.
C. Both objects have large masses and are close together.
D. Both objects have small masses, and they are far apart.
Answers
Volcanos are a geologic phenomenon that occurs at tectonic plate boundaries.Which provides the best evidence for the theory that faults and volcanoes are results of tectonic plate interactions?
a. Faults on tectonic plates are in constant motion, but volcanoes may not erupt for many
years
b. Tectonic plates that have many faults do not usually have volcanoes.
a. Faults and volcanoes existed long before there were tectonic plates.
b. Faults and volcanoes are often found at tectonic plate boundaries.
Answers
i know nothing about basketball, pleas help. List one type of shot. Tell me about this shot.
Answers
Answer: A half court shot
Explanation: A half court shot is when you go the the half of a court a shoot a basketball into the hoop.
Explanation: it is a shot with the ball thrown in the basketball hoop on the side of the court closest to the hoop.
What are the purposes of people
Answers
Answer:
Everybody has a purpose Your purpose might be for GOD AND TO HELP OTHER PEOPLE TO GOD or to DESIGN STUFF AND GET FAMOUS.
Explanation:
SOMEONE HELP QUICK! (question in the picture)
Answers
2) 5.6
3)0.8
.............………
20 PTS HELP PLS Several electric motors can pump an equal amount of water into an elevated water tank. The time required for each motor is shown.
Which motor has the greatest power output?
#1
#3
#4
#2
Answers
Which of the following is a common downside of net pens, one of the most common forms of aquaculture?
-
A - overcrowding
B - disease
C - the use of antibiotics
D - escapes
All of the above
Answers
Answer:
Answer is overcrowding aka answer choice A. I got the question and got it right. Please mark brainliest. Have a good day! :)
Explanation:
Overcrowding causes disease and leads to the use of antibiotics.
Escapes lead to contamination of natural or free sea life.
Reading Check Infer why the wheels of a car get hot when the car is driven.
Answers
Answer:
Basically it's friction.
Explanation:
The tires of a car are rubber and hollow so there is a lot of pressurized air inside the tire. As the car travels down the road and the tires rotate and make frictional contact with the ground, the air molecules inside are constantly in motion and making random collisions with the tire walls and each other. This increase in molecular collisions increases the kinetic energy of the air which in turn increases the temperature of the air. Also, the outer part of the tire is in constant contact with the road and the high friction coefficient between the two produces heat, especially at higher speeds. This is why the tires warm up with driving use. If you measure the air pressure in a tire when its "cold" prior to starting the car and then measure the air pressure again after driving at high speed for 20 minutes, you will notice that the air pressure increases by a few psi as a result of the heat.