Here is a function named SeqToSqrt2 that accepts a signal input variable N that will be an integer. The function generates a row vector containing the first N terms of the sequence and assigns it to the variable terms.
It also generates a scalar variable that is the relative error between the last term in the sequence and 2 given by the formula below (the vertical bars indicate an absolute value). The error result is assigned to the variable relError.
function [terms, relError] = SeqToSqrt2(N)
x(1) = 1;
for i = 2:N
x(i) = 1/2*x(i-1) + 2*x(i-1);
end
terms = x;
relError = abs(2 - x(end))/2;
end
The function uses a for loop to generate the sequence. The first term of the sequence is initialized to 1 and each subsequent term is calculated using the formula xi=12xi-1+2xi-1for i=2,3,4,…,N. The function returns a row vector containing the first N terms of the sequence and a scalar variable that is the relative error between the last term in the sequence and 2.
LEARN MORE ABOUT integer here: brainly.com/question/1768255
#SPJ11
V. ASSESSMENT (Time Frame:
(Learning Activity Sheets for Enrichment, Remediation, or Assessment to be given
Direction: Choose the letter of the correct answer. Use another
1. These are materials or substances such as minerals, fore
used for economic gain.
A. Natural resources
C. Non renewable
B. Renewable resources
D. Minerals
2. In which way can we protect our environment?
A. Littering
C. recycling
B. Polluting
D. contaminating
3. Which of these is the primary cause of land pollution?
A. Improper garbage disposal C. Recycling mate
B. Planting of trees
D. Waste segrega
4. Your community is rich in metallic materials. Which of
conserve such precious mineral deposits?
Answer:
1. A. Natural resources
2. C. Recycling
3. A. Improper garbage disposal
4. C. Formulate laws and ordinances to regulate the mining of minerals
Explanation:
Question; Obtained from a similar posted question
1. These are materials or substances such as minerals, forest, water, and fertile land that occur in nature and can be used for economic gain
4. Options
A. Use all of them to earn money
B. Put up tunnels to harvest all metallic minerals
C. Formulate laws and ordinances to regulate the mining of minerals
D. Use dynamite to clear out the area and reveal the mineral deposits
1. A. natural resources
The materials that come from nature and can be found in an area owned by a person and are economically valuable are known as A. natural resources
2. C. recycling
The environment is protected by reducing the consumption of the vital resources that ensure sustainability through the use of C. recycling already produced items as raw materials to produce new items rather than making use of raw materials naturally present in the environment
3. A. improper garbage disposal
Land pollution which is the introduction of potentially harmful, and unsightly materials on the surface soil or under the surface, is caused primarily by A. improper garbage disposal
4. C. Formulate laws and ordinances to regulate the mining of minerals
The metallic materials, which are mineral resources are located under the ground and are extracted from different locations in an area, therefore, they are mined at different times by different methods
To ensure that the precious mineral deposits are conserved, they require laws and ordinance for the regulation of mineral mining
Therefore; the correct option is;
C. Formulate laws and ordinances to regulate the mining of minerals
Compute the discount factors for each of the 3 individuals:
Paolo’s discount rate = 5%
Chet’s discount rate = 18%
Jabari’s discount rate = 26%
2. In the Metropolitan City of Deep State there are 5 hospitals (DS1 to DS5)
DS1’s revenue is $1 billion
DS2’s revenue is $2 billion
DS3’s revenue is $4 billion
DS4’s share is 2X the share of DS5.
Total revenue of all 5 hospitals in Deep State is $25 billion
Compute the HH Index.
3. Given
IH = $5 m
IS ’ = $4 m
E(I) = $4.7 m
p = 10%
IH ’= $4 m
Describe this policy (full, partial,fair, unfair, combination?)
Solve for r
Solve for Is
Solve for q
4. ON the R-S graph describe the locations of
- Partial and Unfair
- Full and Unfair
5. Given starting point E on an R-S graph, assume both r and q increase with r change > q change.
What will be the location of the new point in relation to point E?
Ex. Left above E, Right below E, Left parallel to E, etc.
The HH File measures market concentration by considering the squared market offers of members, whereas a reasonable approach guarantees an impartial dispersion of assets among people.
How to compute the discount factors for each of the 3 individuals1. To compute the discount variables for each person, we utilize the equation: Rebate figure = 1 / (1 + rebate rate).
Paolo's rebate figure = 1 / (1 + 0.05) = 0.9524
Chet's markdown figure = 1 / (1 + 0.18) = 0.8475
Jabari's rebate calculate = 1 / (1 + 0.26) = 0.7937
2. To compute the HH Record (Herfindahl-Hirschman Record), we ought to calculate the marketing offers of each healing center and square them, at that point entirety them up.
DS4's share = 2 * DS5's share
DS1's share = $1 billion / $25 billion = 0.04
DS2's share = $2 billion / $25 billion = 0.08
DS3's share = $4 billion / $25 billion = 0.16
DS5's share = 1 / 2 + 1 = 0.3333 (since DS4's share is twice DS5's share)
HH List =\(((0.04^2 + 0.08^2 + 0.16^2 + (2 * 0.3333)^2 + 0.3333^2)) = 0.2629\)
3. The given approach can be portrayed as reasonable. Since E(I) is break even with the normal of IH and IS', it demonstrates an evenhanded dissemination of assets among people.
Tackling for r: r = (IH' - E(I)) / E(I) = ($4m - $4.7m) / $4.7m = -0.1489 or -14.89%
Understanding for Is: Is = IS' / (1 + p) = $4m / (1 + 0.10) = $3.636m
Fathoming for q: q = Is / IH = $3.636m / $5m = 0.7272 or 72.72%
4. On the R-S chart:
Partial and fair: This point speaks to a circumstance whereas it where fractional assets are designated, and the dispersion is considered unjustifiable.Full and fair: This point speaks to a circumstance where all assets are designated, but the conveyance is still considered unjustifiable.5. In case both r and q increment with a bigger alter in r compared to q, the modern point will be found to the cleared out of point E and underneath it on the R-S chart.
Learn more about discount factors here:
https://brainly.com/question/8691762
#SPJ4
Customer Service. Is an organization's ability to _______ customers
Answer:
Serve
Explanation:
Customer Service
Answer:
At its most basic level, customer service is an organization's ability to supply their customers' wants and needs. But this definition leaves out the transactional nature of customer service, and it's this transactional aspect that drives customer loyalty.
Explanation: Hope this helps!
A type of chart that shows the contribution of each item for a total of 100% is called a a.bar chart b.column chart c.line chart d.pie chart
Answer:
D. Pie Chart
Explanation:
A pie chart is a circle that has a percentage of certain things. For instance, if you were making a pie chart of what colors your family liked, let's say you have 5 other members in your family. 2 of them like the color blue, 1 likes the color red, 1 likes yellow, and 1 likes green. Your pie chart would be partitioned like a fraction model, and you would put 20% for green, 20% for yellow, 20% for red, and 40% for blue.
Hope this helps! <3
~Sakura Hitoroku
Disadvantages of the divisional organization structure are _____. each division is able to operate independently from the parent company each division is able to operate independently from the parent company cheap to operate cheap to operate cannot share resources with other divisions cannot share resources with other divisions more expensive to operate more expensive to operate
Answer:
Disadvantages:
1. A division may feel separated from the parent company because it has too much independence
2. This feeling of separation may lead to the division only worrying about meeting it's goals and objectives and not the companies as a whole
3. This system may be more expensive to operate and cannot share resources with other divisions
Explanation:
1. Explain how the trend to digital affects jobs in the audio and video production industry.
Answer& Explanation:
The trend toward digital technology has had a significant impact on jobs in the audio and video production industry. Digital technology has made it easier and more affordable for individuals and companies to create their own audio and video content, which has led to an increase in competition in the industry. This has made it more difficult for professionals in the field to find work, and it has also put pressure on companies to reduce their costs by hiring lower-paid workers or outsourcing work to other countries.
Additionally, the rise of digital technology has led to changes in the way that audio and video content is produced, distributed, and consumed. Many traditional production roles, such as film editors and sound engineers, have been replaced or supplemented by digital tools and techniques. This has led to a need for professionals with different skills and expertise, such as knowledge of digital audio and video software and experience with online platforms and distribution channels.
Overall, the trend toward digital technology has had a major impact on the audio and video production industry, and it has changed the types of jobs and skills that are in demand in the field.
which fire suppression system class is required for protecting server rooms full of computing equipment?
There are several extinguishers that are specifically made for Class C flames that will be safe for sensitive electronic equipment as well as safe and effective at putting out electrical fires. They're frequently referred to as "clean agent fire extinguishers."
What exactly are computer devices?
Computing Equipment is a blanket term that refers to any computers, software, wiring, network elements, and network services, including voice, data, and video facilities, that are either owned, operated, or offered by The College.
What kind of equipment are examples?
Equipment examples include cars, trucks, and manufacturing machines. They differ from intangible assets (such patents, trademarks, or copyrights), which lack a physical form, in that they are tangible because they do.
To know more about Computing equipment visit;
https://brainly.com/question/28410351
#SPJ4
when comparing functional mri (fmri) and event-related potential (erp) recordings, fmri has:
When comparing functional MRI (fMRI) and event-related potential (ERP) recordings, fMRI has Spatial Resolution, Whole Brain Coverage, 3D Visualization, Detection of Blood Oxygen Level Dependent (BOLD) Signal, Long Duration Tasks and Study of Functional Connectivity.
Spatial Resolution: fMRI provides a high spatial resolution, allowing researchers to localize brain activity to specific regions or structures.
Whole Brain Coverage: fMRI can capture brain activity across the entire brain, providing a comprehensive view of brain functioning during a task or resting state.
3D Visualization: fMRI generates 3D images or maps of brain activation, making it visually intuitive and easy to interpret.
Detection of Blood Oxygen Level Dependent (BOLD) Signal: fMRI relies on the BOLD signal, which reflects changes in blood oxygenation associated with neural activity.
Long Duration Tasks: fMRI is suitable for recording brain activity during relatively long-duration tasks or resting state conditions.
Study of Functional Connectivity: fMRI is commonly used to investigate functional connectivity, which refers to the synchronized activity between different brain regions.
To learn more on Functional MRI click:
https://brainly.com/question/21405582
#SPJ4
As the Social Media Strategist at a company, your coworker comes to you and asks you to explain that if your ads and products are all over the Internet, how would anyone ever find them? Which would be your best explanation?
Explanation:
They can find the ads all over the internet. The ads will be seen by people using all kinds of websites, and of all age groups.
Which statement is most likely to be true of a self-driving vehicle rated at
automation level 2 (partial automation)?
A. The vehicle is mostly controlled by artificial intelligence.
B. The vehicle is completely controlled by a computer.
C. The driver's seat does not need to be occupied.
D. The vehicle may use artificial intelligence to stay in the correct
lane.
Answer:
i would select D.
Explanation:
Consider the following method:
public static void mix(String word, String letter)
{
int counter = 0;
while(word. IndexOf(letter) > 0)
{
if(word. Substring(counter,counter + 1). Equals(letter))
{
word = word. Substring(0, counter) + "0"
+ word. Substring(counter +2, word. Length());
}
counter++;
}
System. Out. Println(word);
}
What value word would be printed as a result of the call mix("Hippopotamus", "p")?
Hippopotamus
Hi0o0tamus
Hi00o0otamus
Hiootamus
Hi0po0otamus
Answer:
The value that would be printed as a result of the call mix("Hippopotamus", "p") is Hi0po0otamus.
The method starts by initializing the counter variable to 0. It then enters a while loop that continues as long as the IndexOf method returns a value greater than 0. This means that the loop will continue as long as the letter "p" is found in the word.
Inside the loop, the code checks if the character at the current position in the word (determined by the counter variable) is equal to the letter "p". If it is, it replaces that character with the character "0" and updates the value of the word variable. If it is not, the counter variable is incremented and the loop continues.
Since the word "Hippopotamus" contains two occurrences of the letter "p", the loop will run twice and replace both occurrences with "0", resulting in the output Hi0po0otamus.
Explanation:
……………………is one of the most popular cloud storage facilities.
.
It matters if you capitalize your search words in a search engine
True
False
Answer:
false
Explanation:
search engines really don't care. they'll find the answer almost always whether or not you capitalize things
Declare an array of int values westboundHollandTunnelTraffic that can store the number of vehicles going westbound through the Holland Tunnel - on a particular hour (numbered 0 through 23) - on a particular day (numbered 0 through 6) - on a particular week (numbered 0 through 51) - over the last ten years (numbered 0 through 9). The innermost dimension should be years, with the next being weeks, and so on.
Answer:
Following are the declaration of the array:
int westboundHollandTunnelTraffic [10] [52] [7] [24]; //defining an integer array that holds days, week, hour, and year value
Explanation:
In the above-given code, an array that's name is " westboundHollandTunnelTraffic " is declared and the type of the storing elements in the array is an integer.
In this array, it first stores the year's value, and in second, it stores week values, in third, it stores day value, and the last it stores hours value.
which is not a good use of a perfect size array? question 2 options: university student ids names of the week names of the months names of marker colors in a box of 8g
A size array is a useful data Structure for storing fixed-size collections of data.
A perfect size array is an efficient way to store and organize data in programming languages. It is a fixed-size collection of elements that can be accessed using an index. However, not all types of data are suitable for storage in a perfect size array. Out of the given options, the option that is not a good use of a perfect size array is the names of marker colors in a box of 8g. This is because the number of colors in a box of 8g may vary between different brands and batches, which makes it difficult to determine the exact size of the array. Furthermore, if new colors are added or old ones are discontinued, the array would need to be resized, which is not possible with a perfect size array.University student IDs and names of the week and months are good examples of data that can be stored in a perfect size array. These types of data have a fixed number of elements that are unlikely to change frequently. This makes it easy to determine the size of the array and access the elements using their index. In conclusion, a perfect size array is a useful data structure for storing fixed-size collections of data. However, it is important to consider the nature of the data being stored and whether it is suitable for storage in a perfect size array.To Learn More About size array
https://brainly.com/question/17025007
#SPJ11
What are some technical challenges and questions that arise from the need to represent digital information in computers and transfer it between people and computational devices?
Answer:
security
Explanation:
One technical issue that arises from this is security. Many times the information that is being transferred is private or even valuable, therefore grabbing the attention of hackers/thief's that want this information. This makes security highly important, but making sure that the information is completely secure is impossible. The best that can be done is adding certain safety measures to secure the information as much as possible, which in term is a technical challenge.
a technically qualified individual who may configure firewalls and idpss, implement security software, diagnose and troubleshoot problems, and coordinate with systems and network administrators to ensure that security technical controls are properly implemented is known as a security architect. question 18 options: true false
True. A security architect is a technically qualified individual who is responsible for configuring firewalls and IDPSs, implementing security software, diagnosing and troubleshooting problems, and coordinating with systems and network administrators to ensure that security technical controls are properly implemented.
A firewall is a network security device that monitors incoming and outgoing network traffic and decides whether to allow or block specific traffic based on a defined set of security rules.
Firewalls have been a first line of defense in network security for over 25 years. They establish a barrier between secured and controlled internal networks that can be trusted and untrusted outside networks, such as the Internet.
A firewall can be hardware, software, software-as-a service (SaaS), public cloud, or private cloud (virtual).The following is a list of some common types of firewalls: Firewalls and anti-viruses are systems to protect devices from viruses and other types of Trojans, but there are significant differences between them. Based on the vulnerabilities, the main differences between firewalls and anti-viruses are tabulated below:
learn more about firewalls here:
https://brainly.com/question/13098598
#SPJ11
1. How many lines would be required to display a circle of diameter 200 mm within a display tolerance of 0.1 mm? What would the actual display tolerance be for this number of lines?
The number of lines required to display a circle of diameter 200 mm within a display tolerance of 0.1 mm, we can calculate the circumference of the circle and divide it by the desired display tolerance.
Circumference of the circle = π * diameter
= π * 200 mm
Number of lines required = Circumference of the circle / Display tolerance
= (π * 200 mm) / 0.1 mm
To find the actual display tolerance for this number of lines, we divide the circumference of the circle by the number of lines:
Actual display tolerance = Circumference of the circle / Number of lines
= (π * 200 mm) / (Circumference of the circle / Display tolerance)
= Display tolerance
Therefore, the actual display tolerance for the calculated number of lines will be equal to the desired display tolerance of 0.1 mm. In summary, the number of lines required to display a circle of diameter 200 mm within a display tolerance of 0.1 mm is determined by dividing the circumference of the circle by the display tolerance. The actual display tolerance for this number of lines remains at 0.1 mm.
Learn more about tolerance calculations here:
https://brainly.com/question/30363662
#SPJ11
attributes in xml should not be used when: group of answer choices the attribute data in question has some substructure of its own. the attribute data in question is information about the element. the attribute data in question is used to identify numbers of names of elements. the attribute data in question does not have a substructure of its own.
Attributes in XML should not be used when the attribute data in question has some substructure of its own. Attributes in XML are used to provide additional information about an element.
Instead, complex data structures should be represented using child elements of the main element. For example, consider an XML representation of a person, where we want to include information about their name and their address. We could use attributes to represent the individual pieces of the person's name (e.g., firstname , lastname), but we should not use attributes to represent the components of the person's address (e.g., street, city, state, zip). Instead, we should represent the address information as child elements of the main person element.
<person>
<name>
<first_name>John</first_name>
<last_name>Smith</last_name>
</name>
<address>
<street>123 Main St.</street>
<city>Anytown</city>
<state>CA</state>
<zip>12345</zip>
</address>
</person>
In this example, the name information is represented using child elements (i.e., first_name and last_name), while the address information is also represented using child elements (i.e., street, city, state, and zip). This approach is more flexible and allows for more complex data structures to be represented in the XML document.
Learn more about data structures here:
https://brainly.com/question/29487957
#SPJ11
Attributes in XML should not be used when the attribute data in question has some substructure of its own.
This is because attributes are meant to provide additional information about the element they belong to, but they are not designed to hold complex data structures. Instead, XML elements should be used to represent data that has a substructure of its own. Additionally, attributes should not be used to identify numbers or names of elements, as this information should be included as part of the element name itself. However, if the attribute data in question does not have a substructure of its own and is simply providing information about the element, then it is appropriate to use an attribute. In this case, the attribute should be given a descriptive name that clearly indicates its purpose.
Learn more about xml:
https://brainly.com/question/31492100
#SPJ11
You have two Windows Server 2016 computers with the Hyper-V role installed. Both computers have two hard drives, one for the system volume and the other for data. One server, HyperVTest, is going to be used mainly for testing and what-if scenarios, and its data drive is 250 GB. You estimate that you might have 8 or 10 VMs configured on HyperVTest with two or three running at the same time. Each test VM has disk requirements ranging from about 30 GB to 50 GB. The other server, HyperVApp, runs in the data center with production VMs installed. Its data drive is 500 GB. You expect two VMs to run on HyperVApp, each needing about 150 GB to 200 GB of disk space. Both are expected to run fairly disk-intensive applications. Given this environment, describe how you would configure the virtual disks for the VMs on both servers.
The virtual disk configuration for the VMs on both servers in this environment is shown below.
In the Hyper V Test,
Since there will be two or three virtual machines running at once, each of which needs between 30 and 50 GB of the total 250 GB of disk space available,
What is virtual disks?Setting up 5 virtual disks, each 50 GB in size.
2 VMs each have a 50 GB virtual drive assigned to them.
The above setup was chosen because running three VMs with various virtual disks assigned to them will not pose an issue when two or three VMs are running concurrently and sharing the same virtual disk. This is because the applications are disk-intensive.
To learn more about virtual disks refer to:
https://brainly.com/question/28851994
#SPJ1
Given this environment, the virtual disk configuration for the VMs on both servers is shown below. Because two or three VMs will be running at the same time, and each VM has disk requirements ranging from 30 to 50 GB of total disk space of 250 GB.
What is Hyper V Test?While there are several methods for testing new virtual machine updates, Hyper-V allows desktop administrators to add multiple virtual machines to a single desktop and run tests. The Hyper-V virtualization technology is included in many versions of Windows 10. Hyper-V allows virtualized computer systems to run on top of a physical host. These virtualized systems can be used and managed in the same way that physical computer systems can, despite the fact that they exist in a virtualized and isolated environment. To monitor the utilization of a processor, memory, interface, physical disk, and other hardware, use Performance Monitor (perfmon) on a Hyper-V host and the appropriate counters. On Windows systems, the perfmon utility is widely used for performance troubleshooting.Therefore,
Configuration:
Creating 5 Virtual disks of 50 GB each.
1 virtual disk of 50 GB is assigned to 2 VM.
The above configuration is because since two or three VM will be running at the same time and using the same virtual disk will cause a problem since the applications are disk intensive, running three VMs with different virtual disks assigned to them, will not cause a problem.
For Hyper V App,
Two VM will run at the same time, and the disk requirement is 150 - 200 GB of 500 GB total disk space.
Configuration:
Creating 2 virtual disks of 200 GB each with dynamic Extension and assigning each one to a single VM will do the trick.
Since only two VMs are run here, the disk space can be separated.
To learn more about Hyper V Test, refer to:
https://brainly.com/question/14005847
#SPJ1
30 POINTS FOR THE CORRECT ANSWER
For this discussion, choose two different binding techniques, two different papers, and two different finishing techniques for a 24-page brochure. Describe the pros and cons of your choices and how it may impact your design and the setup of the document.
The chosen type of binding techniques are:
Saddle stitch binding. Hardcover or case binding.The papers type are:
Uncoated paper coated cover stockThe finishing techniques are:
Lamination Spot UV varnish.What are the pros and cons of my choices?Case binding is best because it is used in a lot of books were all the inside pages are known to be sewn together.
The Cons of case Binding is that it does not give room for one to lay books flat.
Saddle stitching is good because it can be used in small books that has fewer pages. Its limitations is that it only takes about 100 pages.
Learn more about binding techniques from
https://brainly.com/question/26052822
#SPJ1
A list of sources used for in-text citations that appears at the end of a document is called:
Autobiography
Editor's reference
Works Cited page
Content Review
Three popular types of ____ are handheld computers, PDAs, smart phones.
Answer:
portable media players, and digital cameras
Explanation:
Three popular types of mobile devices are handheld computers, PDAs, and smart phones.
What are smart phones?Smart phones can be defined as hybrid versions of mobile devices that are designed and developed to have more features, so as to enable them run different applications, functions and tasks with the aid of software applications such as web browsers, multimedia player, etc.
In Computer technology, three popular types of mobile devices are handheld computers, PDAs, and smart phones.
Read more on smart phones here: https://brainly.com/question/15867542
#SPJ2
If you and a partner are trying to find an issue with a code, what are the steps you would take to find the issue and correct the problem?
Answer:
first take a look which page have a problem. then find the problem in the page source code..usually just forgot to put ;
please write the code for this:
Enter a word: Good
Enter a word: morning
Good morning
w1 = input("Enter a word: ")
w2 = input("Enter a word: ")
print(w1,w2)
I wrote my code in python 3.8. I hope this helps.
Answer:
G_0o*4 Mrn --ing
Explanation:
G = G
_ = space
o = O
* = space
4 = D (the fourth letter in the alphabet)
Mrn = Abbrev. of Morn (ing)
-- = space
ing = ing (last 3 letters of "morning")
Hope this helps <3
List six characteristics you would typically find
in each block of a 3D mine planning
block model.
Answer:
Explanation:
In a 3D mine planning block model, six characteristics typically found in each block are:
Block Coordinates: Each block in the model is assigned specific coordinates that define its position in the three-dimensional space. These coordinates help locate and identify the block within the mine planning model.
Block Dimensions: The size and shape of each block are specified in terms of its length, width, and height. These dimensions determine the volume of the block and are essential for calculating its physical properties and resource estimates.
Geological Attributes: Each block is assigned geological attributes such as rock type, mineral content, grade, or other relevant geological information. These attributes help characterize the composition and quality of the material within the block.
Geotechnical Properties: Geotechnical properties include characteristics related to the stability and behavior of the block, such as rock strength, structural features, and stability indicators. These properties are important for mine planning, designing appropriate mining methods, and ensuring safety.
Resource Estimates: Each block may have estimates of various resources, such as mineral reserves, ore tonnage, or grade. These estimates are based on geological data, drilling information, and resource modeling techniques. Resource estimates assist in determining the economic viability and potential value of the mine.
Mining Parameters: Mining parameters specific to each block include factors like mining method, extraction sequence, dilution, and recovery rates. These parameters influence the extraction and production planning for the block, optimizing resource utilization and maximizing operational efficiency.
These characteristics help define the properties, geological context, and operational considerations associated with each block in a 3D mine planning block model. They form the basis for decision-making in mine planning, production scheduling, and resource management.
switch to the view where you can see live data while modifying the report layout
To view the live or real data while modifying the layout of a report, the appropriate view to select is the Layout view.
Home tab --> View Group ---> click view --> Layout view
The Layout view allows modification of the page or document with the exact or real data as it is more visually oriented than the design view. In the design view, the structure of the report can be modified or restructured without viewing the real data.Hence, the appropriate view mode will be the a layout view.
Learn more : https://brainly.com/question/25651624
Which genre of art is specific to digital media?
A. Graphic design
B. Photography
C. Animation
D. Video Games
What is 36 Denary in Binary?? PLEASE ANSWER I WILL GIVE U BRAINLY!!
Answer:
100100
Explanation:
Heres my answer i hope it helps
Answer:
100100
If you want to know the binary representation of any decimal number up to 7 digits, check out the Decimal to binary converter.
Explanation:
1.a. EXPLAIN THE TERM LOGGING INTO A EMAIL ACCOUNT
1.b. WRITE DOWN THE STEPS TO LOG IN AN EMAIL ACCOUNT
1.c. EXPLAIN THE TERM LOGGING OUT AN EMAIL ACCOUNT
Answer:
The answer to this question is given below in the explanation section.
Explanation:
Logging into an email account:
Logging into email account, that you are trying to login to your email account.
For example, if you want to login to g-mail , you give your user name and password, upon correct user name and password, the email management system will then allow you to login to your account, where you can see your inbox, outbox, and other customized emails.
WRITE DOWN THE STEPS TO LOG IN AN EMAIL ACCOUNT
The following steps are used to log in an email account:
Enter your email account URL in your browser or open the application of email. For example g-mail.Then enter your username and passwordUpon provision of right username and password, email system will direct you to login to your email account.EXPLAIN THE TERM LOGGING OUT AN EMAIL ACCOUNT
The term logging out from an email account means that you are leaving your email account, and the email management system will ensure that no one tries to access your system and protect it from others. It is same like as you are protecting your files and folders and important data from other users in your system while setting login and logout password.