Manufacturing systems may be classified into types, such as customized production, batch production, and continuous production. Describe examples of how each product type is applied; cite examples of products that are produced as customized, batch, and continuous.

To find the scale of your 3D model in relation to real life, you can use the following formula:

Scale = Real Life Size / Model Size

In your case, the real-life size of the bus shelter is given as 157 inches, and the model size is 14 inches. Plugging these values into the formula:

Scale = 157 inches / 14 inches

Scale ≈ 11.21

Therefore, the scale of your 3D model would be approximately 1:11.21. This means that one unit in your 3D model represents 11.21 units in real life. To convert any measurements from your 3D model to real-life measurements, you would multiply them by the scale factor.

The pseudocode from the Coding Log is given below.

# Intro

Print "Welcome to the adventure game!"

Ask for player name and store it in a variable

Print "Hello [player name], let's start the game!"

# Part 1

Print "You find yourself in a dark room with two doors. Do you go through door 1 or door 2?"

Use input() function to get player's choice and store it in a variable

Use a while loop to ensure the player's input is valid (either "1" or "2")

If player chose door 1, print "You find a treasure chest full of gold. Congratulations, you win!"

If player chose door 2, print "You fall into a pit and lose the game. Better luck next time!"

# Part 2

Print "You come across a fork in the road. Do you go left or right?"

Use input() function to get player's choice and store it in a variable

Use a while loop to ensure the player's input is valid (either "left" or "right")

If player chose left, print "You find a magical sword. You win!"

If player chose right, print "You encounter a troll and lose the game. Better luck next time!"

# Part 3

Print "You reach a river with a boat. Do you cross the river or follow the riverbank?"

Use input() function to get player's choice and store it in a variable

Use a while loop to ensure the player's input is valid (either "cross" or "follow")

If player chose cross, print "You safely cross the river and win the game! Congratulations!"

If player chose follow, print "You follow the river and eventually reach a waterfall. You lose the game. Better luck next time!"

Learn more about pseudocode on:

https://brainly.com/question/24953880

#SPJ1

Answer:

A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.

Explanation:

purpose of all components in a water level sensor​

Answer:

Because the equivalent or the total resistance is lower comparatively.

Explanation:

It is because in parallel circuit, the equivalent resistance or the total resistance is lower comparatively and hence more current flow through the circuit.

Basically, the same resistors connected in series have high values as compared to the scenario when these resistors are connected in parallel.

Answer:

with your skillset and mind power

Explanation:

Answer:

Esta es una lista de agencias bajo el Departamento de Defensa de los Estados Unidos (DoD) que anteriormente y poco antes se conocía como el Establecimiento Militar Nacional. Sus principales responsabilidades son controlar las Fuerzas Armadas de los Estados Unidos. El Departamento fue establecido en 1947 y actualmente se divide en tres departamentos principales:

el Departamento del Ejército, la Armada y la Fuerza Aérea, y tiene un personal militar de 1.418.542 (553.044 del Ejército de los EE. UU.; 329.304 de la Armada de los EE. UU.; 202.786 del Cuerpo de Marines de los EE. UU.; 333.408 de la Fuerza Aérea de los EE. UU.). [1] El Departamento de Defensa está encabezado por el Secretario de Defensa. Actualmente, el Departamento de Defensa está dirigido por el secretario de Defensa Lloyd Austin.

Answer:   Road Construction

Or:   Road construction requires the creation of an engineered continuous right-of-way or roadbed, overcoming geographic obstacles and having grades low enough to permit vehicle or foot travel, and may be required to meet standards set by law or official guidelines.

The python program is an illustration of statistical operations, such as addition, subtraction, and multiplication.

This Python program, which uses comments to explain each line, is as follows:

# Program make a simple calculator

# This function adds two numbers

def add(x, y):

   return x + y

# This function subtracts two numbers

def subtract(x, y):

   return x - y

# This function multiplies two numbers

def multiply(x, y):

   return x * y

# This function divides two numbers

def divide(x, y):

   return x / y

print("Select operation.")

print("1.Add")

print("2.Subtract")

print("3.Multiply")

print("4.Divide")

while True:

   # take input from the user

   choice = input("Enter choice(1/2/3/4): ")

   # check if choice is one of the four options

   if choice in ('1', '2', '3', '4'):

       num1 = float(input("Enter first number: "))

       num2 = float(input("Enter second number: "))

       if choice == '1':

           print(num1, "+", num2, "=", add(num1, num2))

       elif choice == '2':

           print(num1, "-", num2, "=", subtract(num1, num2))

       elif choice == '3':

           print(num1, "*", num2, "=", multiply(num1, num2))

       elif choice == '4':

           print(num1, "/", num2, "=", divide(num1, num2))

       # check if user wants another calculation

       # break the while loop if answer is no

       next_calculation = input("Let's do next calculation? (yes/no): ")

       if next_calculation == "no":

         break

   else:

       print("Invalid Input")

At the end of the program, addition, subtraction, and multiplication operations are printed.

To learn more about the Python Program click here:

brainly.com/question/15061326

#SPJ1

The difference in pressure placed on the snow when Tony Hawk stands on one snowshoe compared to standing in one boot is 800 Pa.

1. Convert the weight of Tony Hawk from kg to N (Newton):

  Weight = Mass x Gravity

  Given that Tony Hawk weighs about 60 kg and the acceleration due to gravity is approximately 9.8 m/s²,

  Weight = 60 kg x 9.8 m/s² = 588 N

2. Calculate the pressure exerted by Tony Hawk on the snow when standing on one snowshoe:

  Pressure = Force / Area

  Given that the area of the snowshoe is 0.20 m²,

  Pressure on snowshoe = 588 N / 0.20 m² = 2940 Pa

3. Calculate the pressure exerted by Tony Hawk on the snow when standing in one boot:

  Given that the area of the boot is 0.05 m²,

  Pressure on boot = 588 N / 0.05 m² = 11760 Pa

4. Calculate the difference in pressure placed on the snow:

  Difference in pressure = Pressure on snowshoe - Pressure on boot

  Difference in pressure = 2940 Pa - 11760 Pa = -8820 Pa

Note: The negative sign indicates that the pressure on the snowshoe is lower compared to the pressure on the boot. However, in this context, the absolute value of the difference (8820 Pa) represents the magnitude of the pressure difference.

For more such questions on pressure, click on:

https://brainly.com/question/15176810

#SPJ11

189 cells must be ordered and how would you connect them.

Lead acid batteries are affordable, practical, and suitable for a wide range of battery power applications. They are arguably best recognized for their use in traditional internal combustion automobiles, where they provide the power for all of the electronics, starting, and other functions.

The lead acid battery has several benefits for starting internal combustion engines as well as many other applications. They have a big current and surge capability, which is perfect.

Lead acid batteries are a well-recognized technology that may be produced with ease using tools that are rather low-tech.

Therefore, 189 cells must be ordered and how would you connect them.

To learn more about led cells, refer to the link:

https://brainly.com/question/12699760

#SPJ1

Answer:

1. Always Start by calculating reactions at supports.

2. Make a slice through the members you wish to solve.

3. Treat the half structure as its own static truss.

4. Solve the truss by taking the sum of forces = 0.

5. Take the moment about a node of more than one unknown member.

The tie rod bolts to the underside of the instrument panel and fasten to the steering gear assembly and linkage. Thus, the most valid option for this question is found to be D.

The tie rod connects the steering gear to the steering column. It significantly connects to each end of the rack. The pinion gear is definitely hooked or connected to the steering shaft. It makes it more flexible to work accurately.

According to the context of this question, when you generally turn the steering wheel, the gear spins which typically results in the moving of the rack. This tie rod at each of the terminated sides is effectively attached to the steering arm or steering shaft on the spindle.

Therefore, the tie rod bolts to the underside of the instrument panel and fasten to the steering gear assembly and linkage. Thus, the most valid option for this question is found to be D.

To learn more about Steering gear, refer to the link:

https://brainly.com/question/4144375

#SPJ9

Answer:

Brazil will win copa america

Explanation:

Answer:

Removed

Hope this Helps!

The Answers for the given question are as follow:

a. The model speed is approximately 31.62 rev/min.

b. The scale ratio is approximately 0.0417.

c. The estimated volume flow rate through the model is approximately 943.44 m^3/s.

d. The bearing thrust of the model is approximately 9.72 kN.

To calculate the required values for the water turbine model, we can utilize the concept of dynamic similarity.

a. To find the model speed, we can use the principle of geometric similarity, which states that the ratio of speeds is equal to the ratio of the square roots of the head. Thus:

  Model speed = (√(Model head))/(√(Full-size head)) * Full-size speed

              = (√4.9/√16.5) * 93.7 rev/min

              = 31.62 rev/min

b. The scale ratio can be determined using the equation:

  Scale ratio = (√(Model power))/(√(Full-size power))

             = (√37.5kW)/(√27MW)

             ≈ 0.0417

c. To estimate the volume flow rate through the model, we can use the power equation:

  Model power = (Model efficiency) * (Volume flow rate) * (Model head) * (Gravity)

  37.5kW = 0.88 * (Volume flow rate) * 4.9m * (9.81m/s^2)

  Solving for the volume flow rate:

  Volume flow rate = 37.5kW / (0.88 * 4.9m * 9.81m/s^2)

                   ≈ 943.44 m^3/s

d. To calculate the bearing thrust of the model, we can use the principle of force similarity:

  Bearing thrust model = (Model power / Full-size power) * Full-size bearing thrust

                      = (37.5kW / 27MW) * 7.0GN

                      ≈ 9.72kN

For more questions on force, click on:

https://brainly.com/question/12785175

#SPJ8

Answer:

In Phantom Forces, the Halbek Device is a one-of-a-kind attachment. As stated in the description, the attachment effectively reverses, or rather inverses, the recoil values, causing the weapon to kick downwards instead of upwards.

One field that cannot be pursued in the electrical field is architecture.

While architecture often involves designing and planning structures, it primarily focuses on the aesthetics, functionality, and construction of buildings and spaces.

Although electrical systems play a crucial role in buildings, such as lighting and power supply, the discipline of architecture does not delve deeply into electrical engineering principles and technologies.

Electrical engineering, on the other hand, focuses on the study and application of electricity, electronics, and electromagnetism, covering areas such as power systems, control systems, telecommunications, and electronics design.

Read more about Electrical engineering here:

https://brainly.com/question/30148871

#SPJ1

Answer:

VR Prototyping

VR Prototyping Can Save you Thousands of Dollars.

Explanation:

there you go lad

In order to review a fluid power system where there is a lost of significant amount of energy, the engineer is more likely to add an additional pump to increase the power in the system.

In this context, the engineer is a professional who is specialized in repair of complex system of machines such as  fluid power system.

Hence, the engineer is more likely to add an additional pump to increase the power in the system as the first step of inspection of the faulty fluid power system.

Therefore, the Option D is correct.

Read more about power system

brainly.com/question/4262025

Answer:

d

Explanation:

In order to begin building construction, it is essential to adhere to all California's edicts and regulations, as this state requires strict compliance with seismic laws and environmental concerns for constructing high-rises.

It is imperative that you acquire the valid documentation and permissions given by pertinent authorities.

Moreover, it is sensible to reflect upon the regional meteorological patterns and geological conditions. Since California is renowned for robust earthquakes and devastating fires, the edifice must be engineered to endure these potential disasters. .

Learn more about company on

https://brainly.com/question/24553900

#SPJ1

The appropriate faults abs consequences will be:

1  Power Loss  Check all the connections includes power supply and wire connections

2  Solenoid stuck   Air pressure is not controlled

3 Short circuit   Erartic behavior is failed

4 Open circuit   Loss of control signals

5Contaiminated air  Impaired operations of components

6  Leaking lines  Reduced the air pressure.

It's crucial to keep in mind that the precise effects and fixes may change based on how the electropneumatic circuit is really set up and the components that are employed.

An electropneumatic circuit's problems should be precisely identified and fixed by using the right diagnosis and troubleshooting techniques

Learn more about circuit on

https://brainly.com/question/2969220

#SPJ1

Answer: Dark reflectors are utilized to include “negative fill.” Utilize the dark reflector to decrease the sum of light around your subject. Dark reflectors are for the most part utilized with representations on the cleared out and right sides of the subject to allow them more profundity.

Explanation:

a black reflector is a thing photography

In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

The diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm

≈ 1696.62mm.

Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.

Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

Learn more about locus on

https://brainly.com/question/13941750

#SPJ1

Answer:

hope it helps you..

The three traditional roles of engineering graphics?

The Engineering Drawing is seen as Graphical Communication and this is known to be a kind of a good and unambiguous description of any form of object.

It is one that has been proved to be an efficient in regards to communication method.

Hence, The three traditional roles of engineering graphics?

Learn more about engineering graphics from

https://brainly.com/question/15180981

#SPJ1

Answer:

1. Work is a driving force of identity in your life, whether its because it influences you due to the time spent there. Or its truly a passion of yours.

2. Two main aspects of identity development are self-concept and self-esteem

3. Based on you obviously

Hope this helped!

Explanation:

Answer:

https://quizlet.com/148993376/the-nine-distinct-periods-of-time-flash-cards/

Explanation:

you can find them all : )