Answer:
all of the above
Explanation:
Water biomes describe all the living things living in an area of water such as a lake or ocean. The surrounding environment plays a huge part in what organisms able to live there.
For example, green plants and algae require sufficient sunlight and oxygen to perform photosynthesis. Green plants and algae are an important food source for many other organisms. The amount of salt is important for various fish, as they will be unable to survive in very high salt concentrations. Therefore, all of the above are limiting factors.
Which statements describe freshwater sources? Check all that apply.
Rainwater can replace or replenish freshwater sources.
Precipitation, such as rainwater, is the source of freshwater on Earth.
When the amount of surface freshwater increases, so does the amount of groundwater.
Human activity, such as taking a bath, may change the quality of a freshwater resource.
Pollution in lakes does not affect groundwater because the ground acts as a barrier or filter.
Precipitation, such as rainwater, is the source of freshwater on Earth is the source of freshwater .
What is freshwater ?Freshwater is defined as water with less than 1,000 milligrammes per litre of dissolved particles, most commonly salt. Surface water bodies on Earth are usually thought of as renewable resources as part of the water cycle, despite their reliance on other parts of the water cycle.
What is water cycle ?The water cycle is frequently presented as a straightforward continuous cycle of evaporation, condensation, and precipitation. Although this is a helpful model, the reality is far more complex. Water's paths and influences in Earth's ecosystems are highly complex and not fully known. NOAA is working to improve our knowledge of the water cycle at all scales, from global to local, in order to better predict weather, climate, water resources, and ecosystem health.
To know more about freshwater , visit ;
brainly.com/question/1652768
#SPJ1
Answer:
A,B,C,D took on edge
Explanation:
A blood droplet has a width of 3 mm and length 7 mm. What is the angle of impact?
Round to a whole number.
Angle of Impact (AOI) = Sin ¹(W/L)
A blood droplet measures three millimeters in width and seven millimeters in length. The angle where a blood drop impacts a surface is 25.377 degrees. Convergence Zone
How do you calculate a blood droplet's contact angle?The width is the same as half the length. Due to the fact that Sin(0.5) of an arc is equivalent to 30, the blood was directed at the outermost layer at a 30 degree angle. Bloodstain measurements of 0.04 by 0.16 inches (1 by 4 mm) result in impact angle of around 14.7 degrees.
What transpires to the blood flow when the impact position widens?The shape of the mark can vary with respect to where the damage occurred. With the sharpness of the effect, the fluid drop's form or dimensions grows. No matter how risky the effect of the location, the damage gets darker. 90-degree angles resemble perfectly round drops.
To know more about measures visit:
https://brainly.com/question/2107310
#SPJ1
________ information addresses the extent to which an actor behaves in a similar way in response to a stimulus across time and circumstances.
**Consistency** information addresses the extent to which an actor behaves in a **similar way** in response to a stimulus across time and circumstances.
Consistency information is crucial in understanding an individual's behavior as it helps to predict their future actions based on their past responses. In this context, an actor refers to the individual or entity exhibiting a behavior, while a stimulus refers to any event or situation that triggers a response. By observing consistency in behavior, one can draw conclusions about the actor's underlying motivations, beliefs, and personality traits. This is essential for various fields, such as psychology, sociology, and even marketing, where understanding behavior patterns can inform decisions and strategies.
Know more about con here:
https://brainly.com/question/28506846
#SPJ11
A fourth allele that contributes to coat color in rabbits is chinchilla, which can be represented as Cch. This allele is recessive to the wild-type allele but dominant to the alleles for Himalayan and albino colors. What would be the possible genotypes of a chinchilla rabbit
Rabbits' coat color is determined by a gene with four alleles that compose a multiple allelic series. The possible gentoypes of chinchilla rabbits are 1) Cch Cch, 2) Cch ch, 3) Cch c.
What is a multiple allelic series?When talking about allelic series, we refer to the alleles involved in trait determination. These alleles interact, and according to their dominance pattern, they express a certain phenotype.
A multiple allelic series usually refers to a gene with more than two alleles involved in the feature determination. One of these alleles is the most dominant one, another allele is recessive to all the other alleles, and intermediate alleles are dominant over some of them and recessive to others.
The four alleles involved in rabbits' coat color are part of a multiple allelic series.
To answer the following question, we should know that Rabbits' coat color is coded by a gene with four alleles,
C codes for agouti and is dominant over all the other alleles, cch codes for chinchilla and is recessive to C but dominant over the other two alleles, ch codes for Himalayan, is recessive to C and ccH, but dominnat over cc codes for albino, and is the most recessive one.So, the allelic series is C > Cch > ch > c
The possible genotypes of a chinchilla rabbit are,
Cch Cch ⇒ homozygousCch ch ⇒ heterozygousCch c ⇒ heteroygousYou can learn more about allelic series at
https://brainly.com/question/14032856
https://brainly.com/question/21424661
#SPJ1
What macromolecules is made up of fatty acids and is found in glycerol
Answer:
Lipids
Explanation:
I think lipids are the answer.
What's the answer to this?
Answer:
the 2nd option
Explanation:
Discuss the factors that could fail the process of dough rising
(6marks)
Answer:
The yeast is no longer active, Climate conditions, too much liquid, Wrong type and amount of yeast, Not adding or using too little salt, Insufficient baking time and Wrong oven temperature.
Explanation:
The yeast is no longer active, Climate conditions, too much liquid, Wrong type and amount of yeast, Not adding or using too little salt, Insufficient baking time and Wrong oven temperature are the factors that could fail the process of dough rising. For rising of dough, the environmental conditions and materials that is used in dough must be present in optimum range or quantity.
Which of the following statements about the relationship between eutrophication and algal blooms is true? (A) Eutrophication involves algal blooms. Algae receive limiting nutrients, causing rapid population growth. (B) Algal blooms can cause eutrophication. Algal growth causes limiting nutrients to become available in waterways. (C) Eutrophication directly results in hypoxia. The lack of oxygen drives algal growth, resulting in blooms. (D) Hypoxia leads to eutrophication, and the eutrophic conditions drive algal blooms.
The following statement about the relationship between eutrophication and algal blooms is true: Algal blooms can cause eutrophication. Algal growth causes limiting nutrients to become available in waterways.
Increasing nutrient inputs into aquatic systems can lead to eutrophication, the overgrowth of algae, and changes in the water’s chemistry. Algal blooms can cause eutrophication. Algal growth causes limiting nutrients to become available in waterways. The death of this algae leads to an oxygen-depleted environment, called hypoxia, which is harmful to aquatic life, causing widespread mortality. The increased nutrient input can lead to more frequent and more severe blooms, exacerbating hypoxia.
An excess of supplements — principally nitrogen and phosphorus — in water begins a cycle called eutrophication. Green growth feed on the supplements, developing, spreading, and turning the water green. In some instances, algae blooms can release toxins, block sunlight, and produce an unpleasant odor.
Know more about eutrophication and algal blooms, here:
https://brainly.com/question/30169028
#SPJ11
There are now several effective antimalarial drugs that can treat people who have malaria or prevent them from getting the disease altogether. Predict what will happen to the frequency of the sickle cell allele over the next 100 years as these drugs become more widely used by people living in areas where malaria is endemic: _____________ Predict what will happen to the frequency of the sickle cell allele over the next 100 years in areas like Boston MA, where there is no incidence of malaria: __________ stay the same ; stay the same decrease ; increase increase ; increase increase ; decrease decrease ; decrease
Answer:
decrease, decrease
Explanation:
By using antimalarial drugs in order to prevent malaria, the frequency of the sickle cell allele decreases in both areas where malaria is endemic and the areas where no incidence of malaria occurs because there is no necessity of sickle cell allele in the population to prevent malarial disease. Sickle cells have high significance in prevention of malarial diseases so when there is no malaria happens in the population so there is no need for it and the allele slowly removed from the population and decrease occurs in its frequency.
Air Pollution: Goal is to reduce the carbon footprint of employee travel by 20%. . You have 10 employees that drive to work each day. You will need to find out their Access www.ghgprotocol.org and calculate employee carbon footprint using the Devise 4 ways you can reduce employee travel to reach your goal programs? If so what will it cost the company to implement these goals? Calculate • Will your organization invest in transportation incentives or employee recognition ROI, payback, and a cost benefit analysis for a feasibility study What are the environmental, social, and economic impacts?
Air pollution is a serious problem that can lead to health problems and environmental damage.
The goal of reducing the carbon footprint of employee travel by 20% can be achieved by implementing transportation programs.
Promote telecommuting: Employees can work from home instead of commuting to work. This can be done through a company-wide policy or by providing the necessary equipment to work from home.
Encourage carpooling: Employees can share rides to work with coworkers who live nearby. This can be incentivized by offering preferred parking spots or transportation credits.
Provide public transportation subsidies: Employees can be given subsidies for using public transportation to get to work. This can be done by providing a transit pass or reimbursing employees for transit expenses.
Implement a bike-to-work program: Employees can be encouraged to bike to work by providing bike storage, changing facilities, and safety equipment.
The environmental impact of reducing employee travel is a reduction in greenhouse gas emissions. The social impact is an improvement in the health and well-being of employees who are exposed to less pollution. The economic impact is a reduction in transportation costs for the company.
ROI, payback, and a cost-benefit analysis for a feasibility study are important for determining the effectiveness of transportation programs.
know more about Air pollution here : brainly.com/question/7671110
#SPJ11
What do animal cells need to make energy?
Answer: Eating.
Explanation:
Animals obtain energy by eating plants or animals. The only form of energy a cell can use is a molecule called adenosine triphosphate (ATP). Chemical energy is stored in the bonds that hold the molecule together. ADP can be recycled into ATP when more energy becomes available.
Answer:
Food
Explanation:
Animals obtain energy when they eat. So do we, because we have animal cells! If you don't eat you will get weak and your body needs the nutrients that it gets from the food that you eat. So to make adenosine triphosphate (ATP), you need energy and some other factors that go into making ATP.. but that is the just of it.
You need food.
Hope this helps!
what are the benefits you see for implementing e911 call features for your voip network?
Implementing e911 call features for your VoIP network provides enhanced emergency response capabilities and ensures the safety of your users.
Implementing e911 call features for your VoIP network is crucial for several reasons. Firstly, it enables precise location tracking, allowing emergency services to quickly and accurately locate callers in need of assistance. This is particularly important for mobile VoIP users who may not be tied to a fixed physical address. By automatically transmitting the caller's location information to emergency services, e911 helps reduce response times and ensures that help reaches the right place.
Secondly, e911 call features enable callback capabilities, ensuring that emergency services can reconnect with callers if the call gets disconnected. In situations where communication is critical, this feature can be a lifesaver. It allows emergency responders to gather additional information or provide instructions, maximizing the chances of a positive outcome.
Furthermore, e911 compliance is often a legal requirement for VoIP service providers. Regulatory bodies enforce these requirements to safeguard public safety and ensure that emergency services can effectively respond to calls placed through internet-based telephony systems. By implementing e911 call features, you demonstrate your commitment to adhering to these regulations and prioritize the well-being of your users.
In conclusion, implementing e911 call features for your VoIP network offers significant benefits. It enhances emergency response capabilities, enables accurate location tracking, provides callback capabilities, and ensures compliance with legal requirements. By prioritizing the safety of your users, you create a more secure and reliable communication environment.
Learn more about VoIP network
brainly.com/question/32398485
#SPJ11
what are second messengers? what are second messengers? voltage-gated ion channels peptide neurotransmitters molecules that activate additional enzymes in the cytosol special proteins that span a 3-nm gap between two cell membranes
The correct option is A; Molecules that activate additional enzymes in the cytosol,
The cytosolic portion of the liver comprises soluble phase I enzymes such as esterases, amidases, and epoxyde hydrolases, as well as soluble phase II enzymes such as the majority of sulfotransferases (ST), glutathione s-transferases (GST), and N-acetyltransferases (NAT) (NAT).
These enzymes are known as hydrolytic enzymes, and they are responsible for breaking down big molecules into little ones. For example, big proteins can be broken down into amino acids, huge carbs can be broken down into simple sugars, and large lipids can be broken down into single fatty acids.
At integrin adhesion sites, the cytoplasmic proteins integrin-linked kinase (ILK), pinch, and parvin form the complex (IPP). They play critical roles in integrin-mediated signaling [62,63].
Learn more about to enzymes
https://brainly.com/question/14953274
#SPJ4
Full Question ;
What are second messengers? Choose the correct option. A) Molecules that activate additional enzymes in the cytosol B) Voltage-gated ion channels C) Peptide neurotransmitters D) Special proteins that span a 3-nm gap between two cell membranes
Second messengers are: (3) molecules that activate additional enzymes in the cytosol.
Second messengers are the signaling molecules that are intracellular in nature. They get activated when an extracellular signaling ligand receptor interaction relays the signal for activation. These second messengers relay signals for the further activation of molecules. Th examples are: cAMP, cGMP, IP3, etc.
Enzymes are the biological catalyst that function to increase the rate of any chemical reaction. The enzymes are usually proteinaceous in nature. They work by lowering down the activation energy of a chemical reaction. The example of enzymes are: peptidase, lipase, catalase, invertase, etc.
To know more about enzymes, here
brainly.com/question/17292676
#SPJ4
the _____ conveys sensory information to the cns and motor commands away from the cns to skeletal muscles.
The peripheral nervous system conveys sensory information to the central nervous system and motor commands away from the central nervous system to skeletal muscles.
The peripheral nervous system is responsible for transmitting sensory information from the body's sensory receptors to the central nervous system (CNS), which includes the brain and spinal cord. It also conveys motor commands from the CNS to skeletal muscles, enabling voluntary muscle movement. In summary, the PNS serves as a communication network, connecting the CNS to the rest of the body for sensory perception and motor control.
Learn more about the peripheral nervous system:
https://brainly.com/question/14312818
#SPJ11
Using the drop down menu, complete the last column of the Punnett Square.
please help
Answer:
top right is bb and bottom right is Bb
Explanation:
I took the test
What type of growth pattern will the bats exhibit
Bats typically exhibit sigmoid or S-shaped growth curves, which are characteristic of many populations of living organisms.
What is the type of growth pattern in bats?In the early stages of growth, the bat population is small and has a slow rate of increase. As the population grows, it enters a period of rapid growth, where the rate of increase is high.
Eventually, the growth rate begins to slow down as the population approaches its carrying capacity, which is the maximum number of individuals that can be sustained by the available resources. At this point, the population stabilizes at its carrying capacity, and growth stops or becomes very slow.
This pattern of growth is common in many animal populations and is influenced by factors such as resource availability, predation, disease, and other environmental factors
Learn more about growth patterns at: https://brainly.com/question/14310799
#SPJ1
Where does the restriction enzyme BamH1 cut the DNA?
The restriction enzyme BamH1, also known as BamHI, recognizes and cuts DNA at a specific sequence of nucleotides. The recognition sequence for BamH1 is:
5'-G|GATCC-3'
3'-CCTAG|G-5'
The vertical line indicates the site of cleavage. BamH1 cleaves between the G and the A nucleotides in the sequence G|GATCC, generating "sticky ends" with overhanging single-stranded DNA at the 5' end. This property makes BamH1 useful in DNA cloning and genetic engineering applications.
It is important to note that restriction enzymes, like BamH1, are very specific and will only cut DNA at their recognition site. This makes them a useful tool in molecular biology for manipulating and analyzing DNA.
To learn more about enzymes:
https://brainly.com/question/1596855
#SPJ11
a. State the difference in the results between the model gut where amylase was present and the model gut where amylase was not present.
b. Explain the difference in your results
Answer:
Amylase act as a digestive enzyme in the gut and is responsible for the breakdown of glycosidic bond in carbohydrates
Explanation:
Model gut where amylase was present:
Carbohydrates like starch are easily broken down in the gut that contain amylase enzyme
Model gut where amylase was not present:
Starch and other carbohydrates like maltose, sucrose and lactose etc will remain undigested in the absence of amylase that may results different complications in the body
For further understanding of different types of enzyme and their function, kindly open the document below in wen browser. It will help you a lot
https://www.studypool.com/services/18772163
If the concentration on the inside of a cell is 5% and the concentration on the outside of a cell is 6%, what is true ?O A. The solution is hypotonicO B. none are correct• C. The solution is isotonicO D. The cell will under go hemolysisO E. The solution is hypertonic
If two solutions have the same solute concentration, they are considered isotonic.
If one solution has a higher concentration of solutes with respect to another one, then this solution can be considered hypertonic.
If one solution has a lower concentration of solutes with respect to another solution, then this solution can be considered hypotonic.
The tonicity of the solutions measures the effective osmotic pressure gradient and is relative to the concentration of solutes that do not move freely through the semipermeable membrane. If you consider two solutions separated by a biological membrane, like the cell membrane, the net movement of water between both compartments will be determined by the osmotic pressure, it will diffuse from the compartment with lower tonicity to the compartment with higher tonicity.
In this case, the concentration inside the cell is 5% and the concentration outside the cell is 6%, then the solution found within the cell can be considered hypotonic with respect to the extracellular solution.
Due to the osmotic pressure, the water will diffuse out of the cell. This process will cause the cytoplasm volume to decrease, and the cell will suffer a process called Crenation.
The correct option is E. since the intracellular solution is hypotonic with respect to the extracellular solution.
Which body composition measurement method relies heavily on body water or hydration levels being normal (not too low or too high)?
Hydrostatic weighing is the body composition measurement method that relies heavily on body water or hydration levels being normal.
What is hydrostatic weighing?Hydrostatic weighing is an incredibly accurate technique for measuring body composition. The technique uses tried and true variables that feature a low percentage of error. for that reason, many experts refer it as the gold standard for measuring body composition. In this method to reduce potential errors the person have to sit submerged completely under water during weighing.
Hydrostatic weighing: This technique is also known as underwater weighing since it is based on the Archimedes principle of fluid displacement. Because of its excellent accuracy, the American College of Sports Medicine (ACSM) refers to it as the gold standard. People are weighed while submerged in water.
A method for determining a person's body's density is known as hydrostatic weighing, also known as underwater weighing, hydrostatic body composition analysis, and hydro densitometry. The idea that an object moves its own weight in water is directly applied in this situation.
To know more about hydrostatic weighing, refer
https://brainly.com/question/18229703
#SPJ4
In her notes, Celeste wrote that the human body systems consist of molecules, cells, tissues, organs, and organ systems. What problem will Celeste have on her body systems test when she studies this information? A. She forgot to list organism as a level. B.She should have written chemicals/molecules. C.This is not the correct sequence. D.These are not body systems.
Answer:
The correct answer is - option A.
Explanation:
Celeste wrote only six levels of organization in her notes that include molecules, cells, tissue, organ, and organ system. That is the correct sequence from smaller to larger but she forgot the sixth and a higher level of the body system of the organization.
This level is the organism which includes the organ system. Organ system comprises various organ those perform different action to perform a larger level function.
En una situación experimental, tras permanecer en ayunas, tres personas ingieren: la primera (A) una ración de celulosa, la segunda (B) una ración de glucosa y la tercera (C) una ración de almidón. Compare la rapidez con la que suba la glucemia (nivel de glucosa en sangre) de las tres personas. Razone la respuesta.
Answer:
La respuesta correcta es: "El orden de rapidez en el sube la glucemia es el siguiente: (B) una ración de glucosa, (C) una ración de almidón y (A) una ración de celulosa".
Explanation:
La rapidez a la que sube el nivel de glucosa en la sangre depende del alimento que estemos ingiriendo. En este caso, el ingerir una ración de glucosa será lo que aumente el nivel de glucemia más rápidamente dado que no requiere ningún procesamiento digestivo. En segundo lugar será el almidón, el cuál debe ser degradado por la enzima amilasa para tener acceso a la glucosa. En último lugar será la celulosa, dado que no tenemos las enzimas necesarias para digerirla y se requiere la ayuda de microorganismos para hacerlo.
The phenotype of an organism ?
- represents its genetic composition.
- occurs only in dominant pure organisms.
- cannot be seen.
- reflects all the traits that are actually expressed
HELP PLEASE
Answer:
The phenotype of an organism reflects all the traits that are actually expressed.
Explanation:
Phenotype refers to the visible or evidentiable characteristics that depend on the genotype, which is stored in the DNA. Phenotypic expression, mainly determined by genes, also depends on the influence of the environment on the individual.
Although the phenotype expresses characteristics such as skin, eye and hair color, height or shape of the nose, some characteristics are not entirely visible, such as specific functions or synthesized proteins.
The other options are not correct because:
Represents its genetic composition: this is genotype. Phenotype occurs in all individuals, both dominant and recessive.Many phenotypical characteristics are visible.4. Two experiments were mentioned in the talk: one that tested food preference in caterpillars, and another that tested for egg-laying preferences in adult butterflies. What were the results of those two experiments, and what did those results imply
Jaap de Roode is a biologist that featured on TEDTalks so the query hyperlinks to him.
What happened to pathogen?The danger in the use of man-made medicinal drug whilst treating positive pathogens consists of an inclination for the pathogens to grow to be a resistant strain.
Just like humans, the monarch butterfly on occasion receives ill way to an uncongenial parasite. Monarchs survives with milkweed; their caterpillars devour milkweed vegetation only (Asclepias spp.), and monarch butterflies want milkweed to put their eggs.But biologist Jaap de Roode observed some thing thrilling approximately the butterflies he changed into studying - inflamed girl butterflies might select to put their eggs on a particular sort of plant that helped their offspring keep away from getting ill. How do they recognize to select this plant. Think of it as "the alternative butterfly effect"- that can train us to discover new drug treatments for the remedy of human disease.Read more about the experiments:
https://brainly.com/question/17274244
#SPJ2
Answer:
1st Experiment:
In the first experiment, they tested what food preference caterpillars had between the toxic milkweed and the non-toxic milkweed. The results of the experiment came out "boring" says De Roode. All of the caterpillars ate 50% of the non-toxic milkweed and ate 50% of the toxic milkweed.
2nd Experiment:
In the second experiment, they tested for egg-laying preferences in adult butterflies. They noticed that the adult butterflies laid 60% of their eggs in toxic milkweed and about 30% (the rest) on the non-toxic milkweed. The butterflies greatly preferred toxic milkweed to non-toxic.
(What the results imply)
These results imply that monarch butterflies self-medicate to help themselves and their babies to fight the diseases and parasites that they often are exposed to.
Hope this helped clarify or help you:)
Brainliest would be appreciated:))
observe the given relation and fill in the blanks cucumber: tendril citrus: meiosis: reduction division mitosis:
Answer:
citrus: thorns
mitosis: equational division
Explanation:
From the relationship:
Tendrils are thread-like appendages found in most climbing plants. They primarily function as supporting organs for climbing plants (such as cucumber) by stretching out and twinning around physical supports. The equivalence of this in citrus is the thorn.
Meiosis is a reductional cell division in which the chromosome number of the daughter cells is half of that of the other cells. Mitosis is equational division because the chromosome number of the parent cell is the same as that of daughter cells.
Which image of an everyday item most closely resembles the structure of DNA?
Answer:
spiral staircase
Explanation:
A spiral staircase resembles the structure of DNA.
How is photosynthesis and cellular similar, and how are they different?
Answer:
Photosynthesis makes the glucose that is used in cellular respiration to make ATP. While photosynthesis requires carbon dioxide and releases oxygen, cellular respiration requires oxygen and releases carbon dioxide. It is the released oxygen that is used by us and most other organisms for cellular respiration.
What is the function of Fat cells
how are living things catagorized
Answer:
living /non living
Explanation:
your welcome
Explain the disadvantages of the following characteristics of water injection in waterflooding project: (a) Suspended solids (b) Oxygen content (c) Bacteria content
Water injection is a widely used method in many waterflooding projects in order to maintain the reservoir pressure and improve oil recovery. However, it also has some disadvantages due to suspended solids, oxygen content, and bacteria content.
Suspended solids are tiny particles of matter that are suspended in the water that are either organic or inorganic in nature and can come from a variety of sources such as oil and gas production, drilling operations, and industrial processes. The disadvantages of suspended solids in water injection in waterflooding projects are:
They can cause formation damage by plugging the reservoir pore space and reducing the permeability of the rock and can also cause problems with the injection equipment by clogging the filters and reducing the flow rate of the injected water.
Oxygen is a highly reactive gas that can cause corrosion and degradation of the reservoir rock and the injection equipment. The disadvantages of oxygen content in water injection in waterflooding projects are :
It can cause the formation of scale and other deposits that can reduce the permeability of the rock and increase the pressure drop across the reservoir. It can also cause the formation of emulsions and other undesirable fluid properties that can reduce the efficiency of the waterflooding project.
Bacteria are microorganisms that can grow and multiply in the water and the reservoir rock. The disadvantages of bacteria content in water injection in waterflooding projects are:
They can cause corrosion of the injection equipment and the reservoir rock and can also cause fouling and plugging of the reservoir pore space, reducing the permeability of the rock and reducing the efficiency of the waterflooding project.
Water injection or water flooding project:
https://brainly.com/question/31037991
#SPJ11