_______ is a term often used to describe comprehensive efforts to monitor and improve all aspects of quality within a firm.
Ethics, Robotics, Expert systems, TQM, CIMS

A pair of wires support a heavy painting. The tension in the wires is greater when they are not vertical.

This is because when the wires are vertical, the weight of the painting is evenly distributed between the two wires, so each wire only needs to support half of the weight. However, when the wires are not vertical, one wire will bear more weight than the other, causing the tension in that wire to increase. This is due to the fact that the weight of the painting creates a force that acts perpendicular to the wires, and the wire that is at a greater angle from the vertical will experience a greater component of this force. Therefore, the tension in the wire that is not vertical will be greater.

learn more about tension in the wires here:

https://brainly.com/question/1625948

#SPJ11

The statement is true because analogies help trainees understand new concepts by relating them to something they already know.

When trainees are working on skill-building and expertise, they often encounter new information that can be difficult to comprehend. Analogies provide a way to bridge the gap between the unfamiliar and the familiar, helping trainees connect new information to existing knowledge.

This not only enhances their understanding but also improves retention and recall of the information. Moreover, analogies can make the learning process more engaging and enjoyable, as they add an element of creativity and curiosity. Overall, analogies are valuable tools for trainers to help trainees develop new skills and expertise.

Learn more about analogies https://brainly.com/question/3859340

#SPJ11

Since the beginning of filmmaking, linear video editing has been a popular cutting technique. Before digital formats, editing methods for images and films were done on celluloid film.

It is crucial for businesses since it enables them to stand out from rivals and increase their competitiveness. Software development may enhance customer experiences, increase the number of feature-rich and innovative goods available on the market, and increase the security, efficiency, and productivity of organizations.

A computer product is simply technology that has been created and maintained again for advantage of a user base, frequently to fill a market demand. The majority of us use several software packages every day.

To know more about software visit:

https://brainly.com/question/1022352

#SPJ1

Answer:

defination is apromixely not available at this moment

Flash gas is a phenomenon that occurs when a liquid is suddenly released from a high-pressure vessel, causing some of it to rapidly vaporize into a gas. This sudden vaporization is caused by the decrease in pressure as the liquid is released into a lower-pressure environment.

Flash gas could be applicable in a variety of industries, such as oil and gas, where it can occur during the transportation of crude oil or natural gas. It can also occur in refrigeration systems, where it can cause a drop in efficiency and increased energy costs. To mitigate the effects of flash gas, various methods can be employed, such as using separators to remove the gas from the liquid stream or designing systems with lower pressure drops. Overall, understanding the phenomenon of flash gas is important in ensuring the safe and efficient operation of various industrial processes.

To know more about refrigeration cycle, visit the link : https://brainly.com/question/29369618

#SPJ11

The current in this diode is 0.6 mA because the forward voltage drop of the diode is 0.7 V at 1.0 mA. When the voltage is decreased to 0.6 V, the current is also decreased to 0.6 mA.

A diode is an electronic component that allows current to flow in one direction only. It is made up of two terminals, an anode and a cathode, and is typically made of a semiconductor material such as silicon. Diodes are used in a variety of applications, such as rectifying AC to DC, providing voltage regulation, and protecting circuits from overvoltage. Diodes are also used in logic circuits, such as AND and OR gates, to control the flow of current. Diodes are typically made of a semiconductor material such as silicon. They are made up of two terminals, an anode and a cathode, and are designed to allow current to flow in one direction only. Diodes are used in a variety of applications, such as rectifying AC to DC, providing voltage regulation, and protecting circuits from overvoltage. Diodes are also used in logic circuits, such as AND and OR gates, to control the flow of current. Diodes can also be used to convert AC to DC, as well as to amplify signals. Diodes are also used in a variety of other applications, such as in light-emitting diodes (LEDs) and in photodiodes.

Learn more about Diodes  here

https://brainly.com/question/12721595

#SPJ4

Answer:

look online

Explanation:

The magnitude of reaction for the wheel is 250 N. The coefficient of kinetic energy between the wheel and ground is 0.32.

The friction is given as the stop force acted by the surface to the moving object.

\(v^2=u^2+2as\)

Substituting the values of the initial velocity (u), final velocity (v) and the distance (s) at the contactless surface, the acceleration is given as:

\(0=(5)^2+2a\;\times\;4\\a=3.125\;\rm m/s^2\)

The force can be given as:

\(F=ma\\F=80\;\text{kg}\;\times\;3.125\; \rm {m/s^2}\\\textit F=250\;N\)

The magnitude of reaction for the wheel is 250 N.

\(\mu_kmgs=\dfrac{1}{2}mv^2\\\)

Substituting the values:

\(\mu_k\;\times\;80\;\times\;9.8\;\times\;4=\dfrac{1}{2}\;\times\;80\;\times\;5^2\\\mu_k=\dfrac{5^2}{2\;\times\;9.8\;\times\;4}\\\mu_k=0.32\)

The coefficient of kinetic energy between the wheel and ground is 0.32.

Learn more about kinetic energy, here:

https://brainly.com/question/12669551

#SPJ1

Answer:

For Figure Below, if the elevation of the benchmark A is 25.00 m above MSL:

1. Using the Rise and Fall Method, find the reduced level for all points. (Construct the Table)

2. Using HPC Method, find the reduced level for all points. ( Construct the Table).

3. Show all required Arithmetic checks for your work. For Item 1 and 2.

4. What is the difference in height between points H and D?

5. What is the gradient of the line connecting A and J, knowing that horizontal distance = 200

m.

The values of non faradaic currect for linear sweeps are :

1) V = 0.02V/sec : Non faradic current = 0.4 micro ampere

2) V = 1V/ sec : Non faradic current = 20 micro amperes

3) V = 20V/sec : Non faradic current =  0.4 milliampere

Given,

Scan rate = V = 0.02V/sec

Cd = 20 microfarad / cm²

Here,

Non faradic current = V * Cd

Non faradic current = 0.02 * 20 * \(10^{-6}\)

Non faradic current = 0.4 micro ampere

If,

V = 1V/sec

Non faradic current = 1 * 20 * \(10^{-6}\)

Non faradic current = 20 micro amperes

If ,

V = 20V/sec

Non faradic current = 20 * 20 * \(10^{-6}\)

Non faradic current =  0.4 milliampere

Know more about nonfaradaic current,

https://brainly.com/question/30142553

#SPJ4

A) Sewage Factor: It represents the proportion of water inflow that is expected to be discharged as sewage. It is used in the design of sewer systems to estimate the quantity of sewage flow that will be generated.

B) Connection Factor: It represents the percentage of buildings or properties that are expected to connect to a sewer system. It is used in the design of sewer systems to estimate the total number of connections that will be made to the system.

C) Infiltration Coefficient: It represents the rate at which water enters a sewer system through cracks, joints, and other defects in pipes. It is used in the design of sewer systems to estimate the volume of infiltration that will occur during wet weather conditions.

D) Design Period: It is the length of time for which a particular engineering project is designed to function effectively. For example, in the case of water supply systems, the design period may be 20-30 years, during which the system is expected to meet the water demand requirements of the users.

E) Drop Manhole: It is a type of manhole that is constructed at a location where the sewer pipe changes direction from a horizontal to a vertical alignment. The purpose of a drop manhole is to reduce the velocity of the sewage flow and prevent damage to the downstream sewer structures.

F) Self Cleansing Velocity: It is the minimum velocity required in a sewer pipe to prevent the deposition of solids and ensure the self-cleansing of the pipe. A value of twice the average velocity is commonly used as the self-cleansing velocity.

The factors that affect water demand include population size, economic activity, climate, lifestyle, and water pricing policies. Changes in any of these factors can influence the level of water demand in a given area. For example, an increase in population size or economic activity can lead to a higher demand for water, while the implementation of water conservation measures can reduce water demand.

Learn more about proportion of water inflow  from

https://brainly.com/question/29852904

#SPJ11

When an engine has been diagnosed with blowby, technician B is only correct who states that the compression rings could be worn.

Engine blowby happens when a mixture of combustion gases or air-fuel leaks between the pistons and cylinder wall into the crankcase of the engine because of the lose pistons's rings. Engine blowby can occur within both gas and diesel engines. Minor levels of engine blowby are normal but excessive levels of engine blowby are an indicator of larger issues. So technician B says correctly.

While technician A is not right to say that a cracked flywheel could be a reason for the blowby engine.

You can learn more about engine blowby at

https://brainly.com/question/4015642

#SPJ4

Answer:

a) efficiency is equal to 67.2%, and this is lesser than the maximum obtainable efficiency, so this power output is possible.

b) efficiency is 75%, this is approximately equal to the maximum obtainable efficiency, but not more that it. This power output is also possible.

Explanation:

Cold reservoir temperature Tc = 295 K

Hot reservoir temperature Th = 1175 K

Energy input Q = 150000 K/h

Converting to kJ/s, Q  = 150000/3600 = 41.66 kJ/s

Maximum efficiency that can be obtained from this cycle = \(1 - \frac{Tc}{Th}\)

==> \(1 - \frac{295}{1175}\) = 0.748 ≅ 75%

also recall that actual cycle efficiency = \(\frac{W}{Q}\)

Where W is the energy output or work

a) for work of 28 kW,

eff =  \(\frac{W}{Q}\) =  \(\frac{28}{41.66}\) = 0.672 ≅ 67.2%

this is lesser than the maximum obtainable efficiency, so this power output is possible.

b) for work of 31.2 kW

eff =  \(\frac{W}{Q}\) =  \(\frac{31.2}{41.66}\) = 0.748 ≅ 75%

this is approximately equal to the maximum obtainable efficiency, but not more that it. This power output is possible.

NB: kW is also equal to kJ/S

Answer:

Pi = Ai ⊕ Bi

Ci = Ai . Bi

Si = Pi ⊕ Ci

Ci +1 = Pi Ci + Gi

Explanation:

The algebraic expressions for SUM and CARRY-OUT functions

Pi = Ai ⊕ Bi

Ci = Ai . Bi

Si = Pi ⊕ Ci

Ci +1 = Pi Ci + Gi

NOTE:

⊕ = EXOR function

Pi = carry propagate

Gi = carry generate

ATTACHED IS THE FREE BODY DIAGRAM

Answer:

do u speak english

Explanation:

Answer:

The compressor

Explanation:

to compress the low-pressure dry gas refrigerant from the evaporator and raise its pressure and temperature to that of the condenser, to produce flow around the system.

When adding water to a concrete mix, it is important to follow the manufacturer's instructions and use the right amount of water. Too little water can result in a dry, crumbly mix that is difficult to work with, while too much water can weaken the concrete and reduce its strength.

To add water to a concrete mix, follow these steps:

It is important to note that the exact amount of water needed will vary depending on the type of concrete mix you are using, as well as the weather conditions and the intended use of the concrete. Therefore, it is important to follow the manufacturer's instructions and use the recommended amount of water.

Answer:

Due to risk of damaging of brain.

Explanation:

The electrode therapy is not the most effective treatment for brain disorders because there are various other treatments which can treat the brain disorder without causing damage to the brain. electrode therapy greatly damaged the brain instead of treatment of brain disorder. Medication is the best way to treat brain disorder so that's why electrode therapy is not considered as the most effective treatment for brain disorders, and the doctors recommend an alternative treatment.

Answer:

Coiled tubing is often used to carry out operations similar to wire lining.

This work can be carried out using the combination of the aforementioned operations. To sum the components of a tuple, use the sum() method, as in result = sum(my tuple)

Here, we first convert the tuple to a list, use map() to flatten each list element, sum() to add up each element's values, and then use sum() once more to add up the list as a whole. To sum the components of a tuple, use the sum() method, as in result = sum(my tuple) The sum function adds up the items in an iterable (like a tuple) from left to right and then returns the sum.

# ------- file: myplot.py ------

import matplotlib.pyplot as plt

import numpy as np

x = np.linspace(0, 10, 100)

plt.plot(x, np.sin(x))

plt.plot(x, np.cos(x))

plt.show()

Learn more about Operation here-

https://brainly.com/question/29342143

#SPJ4

To measure the diameters of teflon and steel spheres, a micrometer is typically used.

The bias errors for the micrometer are fixed, systematic errors that are assumed to be zero.

This means that the errors are caused by the instrument itself, rather than from random fluctuations of the measured value. These errors can be caused by a variety of factors, such as misaligned parts, inaccurate measurements, and incorrect calibration.

In order to identify and correct these errors, it is important to understand the source of the errors. The most common sources of bias errors are the instruments themselves, as they may contain inaccurate scales, or may not be properly calibrated.

Learn more about micrometer:

https://brainly.com/question/17229300

#SPJ4

By following some steps, you'll be able to select the appropriate course on the OBS and maintain a direct flight from Mercer County Regional Airport to the Minot VORTAC with a "TO" indication. Remember to account for factors like wind correction and magnetic variation when planning your route.

To make a direct flight from Mercer County Regional Airport (Area 3) to the Minot VORTAC (Area 1) with a "TO" indication, you should follow these steps:

1. Obtain the current aviation sectional chart for the flight area. This chart will provide important information like VOR station locations, frequencies, and magnetic variation.

2. Locate Mercer County Regional Airport (Area 3) and Minot VORTAC (Area 1) on the chart.

3. Using a navigation plotter or protractor, determine the magnetic bearing from the departure airport (Mercer County) to the destination VORTAC (Minot). This bearing is the course you'll need to set on the Omnibearing Selector (OBS) to maintain a direct flight path.

4. Before departure, tune your NAV radio to the Minot VORTAC frequency, which can be found on the sectional chart. The DME (Distance Measuring Equipment) will display the distance to the VORTAC.

5. Set the magnetic bearing you determined earlier on the OBS. A "TO" indication will appear on the CDI (Course Deviation Indicator) or HSI (Horizontal Situation Indicator), showing that you're flying towards the Minot VORTAC.

Learn more about magnetic variation here:-

https://brainly.com/question/11510990

#SPJ11

A max-heap is a binary tree data structure where the value of each node is at least as large as the values of its children. As a result, the root node of a max-heap always holds the largest value in the entire tree.

This property extends to the sub-trees within a max-heap, as well. In any sub-tree of a max-heap, the root node will contain the maximum value in that particular sub-tree.

This property is inherent to the definition of a max-heap, as the requirement for each node to have a value greater than or equal to its children ensures that the maximum value in any sub-tree is at the root. If a node in the sub-tree had a value that was smaller than one of its children, then that child would be the root of a sub-tree with a larger value, violating the max-heap property.

Therefore, it can be concluded that in any sub-tree of a max-heap, the root node will always contain the largest value present in that sub-tree. This property is important for the efficient implementation of various operations in a max-heap, such as inserting and deleting elements, as well as for the efficient storage and retrieval of elements in the heap.

To learn more about  max-heap, click here:

https://brainly.com/question/29563023

#SPJ4

Answer:

Both come from the sun

Both are reusable sources

and both don't cause pollution

Explanation:

Answer:

The advantages of using a pure sine wave for your appliances and machinery are as follows: Reduces electrical noise in your machinery.

translates to no TV lines and no sound system hum.

Cooking in microwaves is quicker.

Explanation:

The smoothest signal is a sine wave, and sine waves are the basis of all functions.

Every other continuous periodic function is a basis function, which means that it can be described in terms of sines and cosines.

For instance, using the Fourier series, I can describe the fundamental Sinusoidal frequency and its multiples in terms of the triangle and square waves.

Answer:

c +5

Explanation:

we have difference in energy =

2.18x10⁻¹⁸ x z² / n²

now n = 1

amount of energy absorbed Δdelta = 7.84×10−17 J

7.84×10⁻¹⁷ = 2.18x10⁻¹⁸ x z²

we divide through by 2.18x10⁻¹⁸

z² = 7.84×10⁻¹⁷ / 2.18x10⁻¹⁸

z² = 35.9633

z = √35.9633

z = 5.9969

≈ 6

charge = atomic number 6 - number of electrons available in the element 1

= 6-1 = 5

from the calculations above, the charge of the one electron specie would be c +5

Hai

Your answer will be A.

If you lower the Air Pressure your Object will Float Down ward. The Air Pressure allows it to Fly.

The pressure field created by faster air movement over an airfoil is; A:  higher

When the air hits the front of the wing, the air will flow in a steeper curve upward, than the bottom wing flow which will lead to the creation of a vacuum on top of the wing that pulls more air towards the top of the wing.

Finally, this air above does the same thing but it will move faster as a result of the vacuum pulling it in, and as such the vacuum now lifts the wing. Thus, Faster air movement over an airfoil creates a higher pressure field.

Read more about pressure field at; https://brainly.com/question/14468674

The should be no concerns about the space immediately below the tanks because there will be no damage to anything if any peril causes the tank to falls.

Potential hazards refers to the active source for potential damage on a building, structure etc

It is important we know that the storage tanks are placed on a platform next to the building at the second-floor level but nothing beneath the tanks stands.

Hence, there should be no concerns about the space immediately below the tanks because there will be no damage to anything if any peril causes the tank to falls.

Read more about Potential hazards

brainly.com/question/7310653