In some creatures, bioluminescence transforms
energy
energy into
OA) heat; light
OB) light; heat
OC) chemical potential; light
OD) light; chemical potential​

Answer:

1/3 kg

Explanation:

Concepts

The formula p = mv tells us that momentum is mass times velocity. We can easily rearrange this equation to solve for m by dividing both sides by v:

Application

We are asked to find the mass of a beach ball, given the velocity as 9 m/s and the momentum as 3 kg · m/s. We can use the formula m = v/p to find the mass of the ball in kilograms.

Solution

Approximately 2.52 x 10¹⁰ years have elapsed between the two measurements.

The decay constant of uranium-238 is 1.55 x 10⁻¹⁰ per year.

The decay constant can be calculated by using the following formula: λ = ln(2) / T1/2where T1/2 is the half-life of the isotope. By plugging in the values for T1/2 in the formula, we can determine the decay constant of uranium-238.λ = ln(2) / T1/2λ = ln(2) / (4.47 x 10)λ = 1.55 x 10⁻¹⁰.

The decay constant of uranium-238 is 1.55 x 10⁻¹⁰ per year. To determine the amount of time that has elapsed between two measurements, we can use the following formula:N = N₀e^(-λt)where N₀ is the initial amount of the isotope, N is the final amount of the isotope, t is the time that has elapsed, and e is the mathematical constant approximately equal to 2.718.

By rearranging the formula, we can solve for t.t = (ln(N₀) - ln(N)) / λWe can use this formula to calculate the time elapsed between two measurements of uranium-238.

Let's assume that the initial amount of uranium-238 is 100 grams and the final amount is 25 grams. We can plug these values into the formula along with the decay constant we found earlier:t = (ln(100) - ln(25)) / (1.55 x 10⁻¹⁰)t ≈ 2.52 x 10¹⁰ years. Therefore, approximately 2.52 x 10¹⁰ years have elapsed between the two measurements.

For more such questions on decay constant, click on:

https://brainly.com/question/31958564

#SPJ8

4. A stimulus is any physical or sensory input that triggers a response or reaction in an organism.

5. Nerve cells, also known as neurons, have the job of transmitting and processing information in the nervous system.

6. Signals from stimuli reach the brain through a process called sensory perception.

7. Their job is to transmit signals from the brain or spinal cord to the muscles, enabling muscle contraction and movement.

8. Without specific context or information about Mosa, Otis, Bert, and their relationship

4. In the comic:

A loud noise that startles a character.

A bright light that temporarily blinds a character.

A foul smell that causes a character to gag.

Personal experience examples:

Feeling a gust of wind that prompts you to close a window.

Hearing a phone ring and reaching to answer it.

Seeing a red traffic light and applying the brakes while driving.

5.They are specialized cells that send electrical signals, called nerve impulses, to communicate with other cells. Nerve cells can be found throughout the body, but they are most concentrated in the brain, spinal cord, and peripheral nervous system.

6. When a sensory organ, such as the eyes, ears, skin, or nose, detects a stimulus, it sends electrical signals to the brain via sensory neurons. These signals travel along neural pathways to specific regions of the brain that are responsible for processing and interpreting the sensory information. The brain then analyzes the signals and generates appropriate responses or perceptions.

7.Nerve cells connected to the muscles are known as motor neurons. Their job is to transmit signals from the brain or spinal cord to the muscles, enabling muscle contraction and movement. Motor neurons serve as a bridge between the central nervous system (brain and spinal cord) and the muscles throughout the body, allowing voluntary and involuntary movements to occur.

8.Without specific context or information about Mosa, Otis, Bert, and their relationship, it's unclear what exactly Mosa figured out or why Otis can't catch Bert. Please provide more details or clarify the question to receive a specific answer.

For more such questions on Stimulus

https://brainly.com/question/3950085

#SPJ8

The beat frequency is 3 beats/sec.

Beat frequency(n) can be found by using the following formula:

n=f2-f1, where f2 and f1 are the given frequencies

n= 515-512

n= 3 beats/sec

Therefore the beat frequency when 512 Hz and 512Hz tuning forks are sounded together is 3 beats/sec.

To learn more about beat frequency, click on https://brainly.com/question/14549472

The chief function of lighting is to provide illumination, making objects visible to the human eye. It also enhances the aesthetics of a space and serves various practical applications such as reading, studying, and working.

From a practical standpoint, the chief function of lighting is to provide illumination. Illumination refers to the process of lighting up a space or object, making it visible to the human eye. Lighting allows us to see and navigate our surroundings, ensuring safety and comfort.

Lighting serves several practical functions in our daily lives. It plays a crucial role in enhancing the aesthetics of a space, creating ambiance, highlighting architectural features, or setting the mood for different activities. Moreover, lighting is essential for various practical applications such as reading, studying, working, cooking, and performing tasks that require visual precision.

Different types of lighting fixtures, such as incandescent bulbs, fluorescent lights, and LED lights, are used to fulfill these functions. Incandescent bulbs produce light by heating a filament, while fluorescent lights use gas discharge to produce light. LED lights, on the other hand, use semiconductors to emit light efficiently.

About chief function of lighting here:

https://brainly.com/question/4469208

#SPJ11

The chief function of lighting from a practical standpoint is to provide illumination to an environment. It helps in visibility in various activities, in addition to enhancing the beauty of a room. Light is necessary for human activities, especially when it comes to night time.

The light will make it possible for people to carry out their activities without any difficulties and also make the environment look beautiful. In general, the function of lighting is to provide illumination, which is significant in different situations and environments. For instance, street lighting is essential because it enhances visibility at night, making it safe for pedestrians and motorists to move around. It also acts as a deterrent to crime, such as robberies, muggings, and other forms of criminal activities that may occur at night. Similarly, home lighting is necessary because it enhances the beauty of the home and provides visibility to the occupants.

It allows people to carry out their activities effectively, read, study, and do other things without straining their eyes. In offices, lighting is necessary because it improves the working environment and reduces accidents that may occur due to poor visibility. Furthermore, it is essential in factories, production lines, and other industrial settings where workers need adequate lighting to carry out their tasks effectively. Finally, lighting is significant in public places like parks, museums, and stadiums, where it enhances the beauty of the surroundings and makes it possible for people to enjoy themselves during the day and night.

To know more about chief function visit:-

https://brainly.com/question/32353286

#SPJ11

Answer:

13,720 joules

Explanation:

Epotential = mgh

mass x gravity x height

Ep= 14 x 9.8 x 100

Ep=13,720 joules

In order for the lighthouse beacon to produce a parallel beam of light, the light source should be placed at the focal point of the converging lens.

When light from the source enters the lens, it will refract and converge to a point at the focal point of the lens. If the light source is placed at this point, the light rays will exit the lens in a parallel direction, producing a parallel beam of light.

It's worth noting that the exact placement of the light source may depend on the specific design of the lighthouse beacon and the properties of the lens being used. But in general, the light source should be positioned at the focal point of the converging lens to produce a parallel beam of light.

What is light ray?

A light ray is a hypothetical straight line that represents the path of light as it travels through space.

To know more about light rays visit:

brainly.com/question/13851007

#SPJ11

A pendulum should be approximately 3.23 meters long to have a period of 3.61 seconds.

The period of a pendulum, which is the time it takes for one complete oscillation, is determined by its length. The equation that relates the period (T) to the length (L) of a pendulum is:

T = 2π√(L/g)

where g is the acceleration due to gravity (approximately 9.8 m/s²).

Rearranging the equation to solve for the length:

L = (T²g)/(4π²)

Substituting the given period T = 3.61 s and the acceleration due to gravity g = 9.8 m/s² into the equation:

L = (3.61² × 9.8) / (4π²)

= (13.0321 × 9.8) / (4π²)

= 127.5758 / (4π²)

≈ 127.5758 / 39.478

≈ 3.2298 m

for more such questions on period

https://brainly.com/question/29813582

#SPJ8

Answer:

question 1 is centripetal acceleration question 2 is 4

Explanation:

centripetal acceleration basically is acceleration that only changes velocity but not speed, while for question 2, you divide 10 by 2.5

Answer:

600 kg

Explanation:

Answer: 5.0025 * 10^-8 N

Explanation:

\(F = \frac{Gm_1m_2}{r^{2} }\)

F = gravitational force

G (is a constant) = 6.67×\(10^{-11}\) N(m/kg)^2

m1 = mass of first object = 500 kg

m2 = mass of second object = 600 kg

r = distance between them = 20 M

\(6.67*10^{-11}N(m/kg)^2* \frac{500 kg*600 kg}{(20m)^2}\\6.67*10^{-11}N*\frac{m^2}{kg^2} * \frac{300000kg^2}{400m^2}\\6.67*10^{-11} N * 750\\5002.5 * 10^{-11} N \\5.0025 * 10^{-8} N\)

The astronaut's final speed with respect to the shuttle after the tank is thrown would be 2.67 m/s.

Let's first find the initial momentum of the system, which is zero because the astronaut is at rest with respect to the shuttle and the tank is thrown in the opposite direction with a speed of 12 m/s:

p_initial = m_astronaut * v_astronaut_initial + m_tank * v_tank_initial

where m_astronaut = 63 kg is the mass of the astronaut, v_astronaut_initial = 0 m/s is the initial velocity of the astronaut, m_tank = 10 kg is the mass of the oxygen tank, and v_tank_initial = -12 m/s is the initial velocity of the tank (negative because it is thrown in the opposite direction).

p_initial = 63 kg * 0 m/s + 10 kg * (-12 m/s) = -120 kg m/s

After the tank is thrown, the system experiences no external forces, so its total momentum remains constant:

p_final = m_astronaut * v_astronaut_final + m_tank * v_tank_final

Since the tank is thrown away from the astronaut with a certain momentum, the astronaut gains an equal and opposite momentum, so we can write:

p_final = -p_initial

Substituting the values of p_final and p_initial, we get:

m_astronaut * v_astronaut_final + m_tank * v_tank_final = -120 kg m/s

We also know that the tank is thrown away at a certain speed, so we can write:

v_tank_final = -12 m/s

Thus:

m_astronaut * v_astronaut_final + 10 kg * (-12 m/s) = -120 kg m/s

v_astronaut_final = (120 kg m/s - 10 kg * (-12 m/s)) / 63 kg

v_astronaut_final = 2.67 m/s

Therefore, the astronaut's final speed with respect to the shuttle after the tank is thrown is 2.67 m/s.

More on the speed of astronauts can be found here: https://brainly.com/question/15561276

#SPJ1

Last one has the greatest inertia

hope it helps

plzz Mark me as brainlylist

Answer: it is A hope that helps

Explanation:

Newton's first law of motion is also known as the law of inertia. Newton's first law applies whether the object is in motion or not.

Objects do not change motion unless a force is applied. The second law states that the force on an object is equal to its mass times its acceleration. The third law states that when two objects interact, forces of equal magnitude and opposite directions are applied to each other. The law of motion shown in the picture is Newton's first law of motion.

According to Newton's first law of motion, a person at rest does not change motion until some pressure is applied. Newton's first law of motion describes how inertia affects moving and stationary bodies. Newton's first law states that an object will either remain stationary or move in a straight line with constant velocity unless an unbalanced force acts on it. Another name for Newton's second law is the law of force and acceleration.

Learn more about Newton's first law here:-https://brainly.com/question/1222214

#SPJ1

Three different methods for the detection of exoplanets are transit method, radial velocity method, and direct imaging. and type of exoplanet is the method most sensitive for detecting is close-in vs. far-out from its host star.

The transit method involves observing a star's brightness and looking for periodic dips in brightness as an exoplanet passes in front of it. This method is most sensitive to detecting large exoplanets that are relatively close to their host stars. The size of the exoplanet can be determined by the amount of dimming, and its orbital period can be determined from the time between dips.

The radial velocity method involves measuring the small wobbles in a star's motion caused by the gravitational pull of an orbiting exoplanet. This method is most sensitive to detecting massive exoplanets that are relatively close to their host stars. The mass of the exoplanet can be determined from the amount of wobble, and its orbital period can be determined from the time between wobbles.

The direct imaging method involves using telescopes to take pictures of exoplanets directly. This method is most sensitive to detecting large, young exoplanets that are far away from their host stars. The brightness of the exoplanet can be used to determine its temperature, and its distance from its host star can be estimated from its location in the image.

To know more about velocity here

https://brainly.com/question/16618732

#SPJ4

Answer: 540 g m/s.

Explanation:

Answer: A.

A momentum of 540 gram meters per second!

Explanation: On Edge!!

Answer:

40m approximately

Explanation:

Given

Force =377N

Mass =86.5kg

Velocity =13.2m/s

Required

Radius of the track

The expression for the centripetal force acting on the cyclist is

F=mv²/r

Make r subject of the formula

r= mv²/F

Substitute

r=86.5*13.2²/377

r= 15,071.76/377

r=39.97

r=40m approximately

The radius of track will be "40 m".

Given:

Force,

Mass,

Velocity,

As we know the formula,

→ \(F = \frac{mv^2}{r}\)

or,

→ \(r = \frac{mv^2}{F}\)

By substituting the values, we get

     \(= \frac{86.5\times 13.2^2}{377}\)

     \(= \frac{15071.76}{377}\)

     \(= 39.97\)

or,

     \(= 40 \ m\)

Thus the above answer is right.

Learn more:

https://brainly.com/question/4137024

Answer:

OA. . review all safety procedures and the lab activity procedure

Explanation:

Answer:

A = [m/s]

B = [m/s²]

Explanation:

Assuming that V has SI units of m/s, then A and BT must also have units of m/s.

A = [m/s]

BT = [m/s]

Since T has SI units of s:

B [s] = [m/s]

B = [m/s²]

Answer:

Choice A

Explanation:

The lower the point the higher the kinetic energy because Mechanical energy is conserved and the Gravitational Potential Energy gets lower when the height is lower

In a radioactive decay, the particle that is emitted is the electron. Therefore, the correct option is C. electron.

During radioactive decay, the atomic nucleus undergoes a change, and one of the common types of decay involves the emission of particles. One such type of decay is beta decay, in which a neutron inside the nucleus of the atom transforms into a proton, an electron and a type of neutrino.

These particles are released in the form of a beta particle. The electron, or beta particle, is a fast-moving particle with a negative charge. It is emitted from the nucleus as a result of the transformation of a neutron into a proton. The mass number doesn't change, but since an additional proton is formed, the atomic number increases by one unit.

To know more about radioactive decay refer to:

https://brainly.com/question/9932896

#SPJ11

Concave mirrors form both real and virtual images.

A concave mirror has an inward-curving reflective surface that faces away from the light source. Light is reflected inward by concave mirrors to a single focus point. Unlike convex mirrors, a concave mirror's created image exhibits a variety of picture types based on the object's distance from the mirror.

A virtual, magnified image of the object is produced when the concave mirror is placed very close to it. As the distance between the object and the mirror increases, the size of the image decreases and real images are produced.

Learn more about Concave mirror here:

https://brainly.com/question/26505785

#SPJ4

Watson adopted the conditioned reflex method of research established by Pavlov and Bekhtere.So option b is correct.

Watson embraced the research methodology of conditioned reflexes, which was pioneered by Ivan Pavlov and Vladimir Bekhterev. This approach involved investigating the connections between stimuli and responses by employing conditioning, wherein a previously neutral stimulus becomes linked to a particular response through repeated associations. Watson's contributions to behaviorism were significantly influenced by Pavlov's extensive research on classical conditioning.Watson was influenced by the work of both Pavlov and Bekhterev, and he adopted their methods of classical conditioning in his own research. He believed that all human behavior could be explained in terms of conditioning, and he conducted experiments on humans and animals to support his theory.

Watson's work on classical conditioning was instrumental in the development of behaviorism, which is a school of psychology that focuses on the study of observable behavior. Behaviorism is still an important school of thought in psychology today, and Watson's work continues to be influential.Therefore option b is correct.

To learn more about  research visit: https://brainly.com/question/968894

#SPJ11

Answer:

Nuclear fusion

Explanation:

The reaction shown in the diagram depicts a nuclear fusion.

 The reaction expression is given as:

        ²₁H   +   ³₁H     →     ⁴₂He   +   ¹₀n  + energy

This reaction is a nuclear fusion expression. Here two small lighter nuclide to form a product with an attendant emission of a neutron and energy.

The combination of lighter nuclides to form a heavier one is nuclear fusion.

Fusion is different from nuclear fission in which a heavier nuclide splits up.

Answer:

Star C

Explanation:

The more heat/energy the more the luminosity.

Answer: B) Frequency

Explanation:

The smallest value for the coefficient of static friction between the crate and the pivot blocks (A and B) so the crate can be lifted using tongs is 1471.5 N

To determine the smallest value for the coefficient of static friction between the crate and the pivot blocks (A and B) so the crate can be lifted using tongs, we need to consider the maximum force that the tongs can exert on the crate without slipping.

Let's assume that the tongs are able to exert a maximum force of F on the crate. According to the laws of physics, the force required to lift an object is equal to its weight. Therefore, the weight of the crate is 150 kg multiplied by the acceleration due to gravity (9.81 m/s²) which is approximately equal to 1471.5 N.

For the crate to be lifted without slipping, the maximum force exerted by the tongs (F) must be equal to or greater than the weight of the crate (W). Therefore, we can write the following inequality:

F ≥ W

Substituting the values, we get:

F ≥ 1471.5 N

Now, let's consider the force required to overcome the static friction between the crate and the pivot blocks. The static friction force is given by:

f = μs N

where μs is the coefficient of static friction, and N is the normal force acting on the crate (which is equal to its weight).

To lift the crate without slipping, the maximum force exerted by the tongs must be greater than or equal to the static friction force. Therefore, we can write the following inequality:

F ≥ f

Substituting the values, we get:

F ≥ μs N

F ≥ μs × 1471.5 N

Now, to determine the smallest value for the coefficient of static friction (μs), we need to rearrange the inequality as follows:

μs ≤ F/1471.5

Therefore, the smallest value for the coefficient of static friction between the crate and the pivot blocks (A and B) so the crate can be lifted using tongs is equal to the maximum force exerted by the tongs (F) divided by the weight of the crate (1471.5 N).

More on static friction: https://brainly.com/question/13828735

#SPJ11

The main answer to your question is that t = t′ at x = x′ for all values of x and x′.

This is because the Lorentz coordinate transformation is based on the principle of relativity, which states that the laws of physics should be the same for all observers in inertial frames of reference.

Therefore, the transformation equations ensure that the time coordinates of two events are equal when they occur at the same location in space for both observers.
The Lorentz coordinate transformation is a mathematical tool used to relate the measurements of space and time made by two observers in relative motion.

It consists of four equations that relate the coordinates of an event in one frame of reference (x, y, z, t) to the coordinates in another frame of reference (x', y', z', t').

The transformation assumes that the speed of light is the same in all frames of reference and that the two frames of reference are moving at a constant relative velocity.

In summary, t = t′ at x = x′ for all values of x and x′ due to the principle of relativity and the use of the Lorentz coordinate transformation equations.

Learn more about inertial frames click here:

https://brainly.com/question/12496190

#SPJ11