A. True. In an Ames Test, bacteria are exposed to a substance suspected of being mutagenic. If the substance causes mutations in the bacteria, some of the bacteria will become unable to produce histidine on their own.
However, a small number of the bacteria may undergo a reverse mutation, in which the mutation is corrected and the bacteria start producing histidine again. These bacteria are known as revertants. The number of revertants is an indication of the mutagenic potential of the substance being tested. Therefore, in an Ames Test, bacteria that start producing histidines are indeed called revertants.
In an Ames Test, the statement "bacteria that start producing histidines are called revertants" is true (a). The Ames Test is a widely used method to detect potential mutagenic compounds. It uses a strain of bacteria that cannot produce the essential amino acid histidine. When exposed to a mutagen, some bacteria may undergo a reverse mutation, regaining the ability to produce histidine. These bacteria are called revertants, and their presence indicates that the tested substance may be mutagenic. The number of revertants is compared to a control group to determine the mutagenic potential of the compound.
Learn more about Ames Test here:
https://brainly.com/question/29575224
#SPJ11
The graphs show two different ways in which a population can change over time. Which statement is true? OA. Graph A's population experienced exponential growth after reaching carrying capacity. B. Graph A's population experienced logistic growth and reached carrying capacity. C. Graph B's population experienced exponential growth after reaching carrying capacity. D. Graph B's population experienced logistic growth and reached carrying capacity.
Conclusion from both graphs indicates that D. Graph B's population experienced logistic growth and reached carrying capacity.
What is population growth?Population growth refers to the increase in the number of individuals in a population over time. It can be calculated by subtracting the number of deaths and emigrants from the number of births and immigrants in a specific period.
Population growth can be expressed as a percentage, and it can be used to analyze trends in population size and demographic changes. High population growth rates can have both positive and negative impacts on the economy, social structure, and environment of a region.
Find out more on population growth here: https://brainly.com/question/25630111
#SPJ1
how long does it take for blow flies to smell a dead body
The smells of decay are particularly unpleasant to the fly. Within 15 minutes after a person's passing, according to some biologists, the bug may find the body, which can act as an hiding location, and feeding station all in one.
Due to the putrefaction of tissues, when a person or animal dies, their body begins to emanate a terrible odor. Flies start to appear within two to three hours after a death due to the stench, which attracts them quickly.
The body will be mostly covered in flies by 12 hours or so. The fundamental idea is as follows: As soon as one to two hours after death, several fly species begin to deposit their eggs in the tissue of a body.
Learn more about dead body Visit: brainly.com/question/30150233
#SPJ4
How do I stop my hands from melting in chocolate?
Tempering is the process of heating and cooling chocolate to stabilise it before using it to make candies and confections.
What is the melting of chocolate?Between 86 and 90 degrees Fahrenheit is where chocolate begins to melt. As a result of your hand's heat raising the temperature of the chocolate, which is substantially lower than the body's normal temperature of 98.6°F, the chocolate melts. The amount of milk fat and other additives like lecithin, as well as the quantity and make-up of the cocoa butter in your piece of chocolate, all affect how quickly it melts. According to recent research, the average body temperature may be decreasing and may now only reach 97.9°F. This temperature is still higher than the melting point of chocolate, thus food will continue to melt in your hands for some time to come.
To learn more about melting of chocolate Please click on the given link:
https://brainly.com/question/29550358
#SPJ4
The fruiting body found above ground in fungi is called the
A. cap.
B. hyphae.
C. mycelium.
Answer:
fruiting body is called cap
The mycelium is the fruiting body found above ground in fungi.
The pileus is the technical name for the cap, or cap-like part, of a basidiocarp or ascocarp (fungal fruiting body) that supports a spore-bearing surface, the hymenium.
A hypha is a long, branching, filamentous structure of a fungus, oomycete, or actinobacterium. In most fungi, hyphae are the main mode of vegetative growth, and are collectively called a mycelium.
A mycelium is a network of fungal threads or hyphae. Mycelia often grow underground but can also thrive in other places such as rotting tree trunks. A single spore can develop into a mycelium. The fruiting bodies of fungi, such as mushrooms, can sprout from a mycelium.
Learn more about fungi at
https://brainly.com/question/22479850
you would like to see if the gene that you are studying in mouse has a homolog in humans. to do this you decide to do a southern blot. you believe the gene sequence will be not be highly conserved. therefore, you would like to select conditions to hybridize your probe with low stringency to find as many candidates as possible. which condition will you use? select one: a. olignucleotide probe of longer length b. olignucleotide probe of shorter length
To maximize the chances of finding candidates for a homologous gene in humans through a Southern blot with low stringency hybridization, you would use an oligonucleotide probe of shorter length.
When conducting a Southern blot with low stringency conditions, the goal is to allow for some degree of mismatch between the probe and the target sequence. This increased tolerance for mismatches increases the likelihood of hybridizing with related sequences that may not be highly conserved.
Using an oligonucleotide probe of shorter length would increase the chances of finding matches with related sequences. Shorter probes have fewer bases, which means there are fewer opportunities for perfect matches, thus increasing the likelihood of hybridizing with less conserved regions. This approach allows for a broader search and the potential to identify more candidate homologous genes in humans.
In contrast, using an oligonucleotide probe of longer length would increase the stringency of hybridization, making it more difficult to find matches with less conserved regions. Longer probes have a higher probability of forming perfect matches, which may exclude less conserved or divergent homologous genes.
Therefore, selecting an oligonucleotide probe of shorter length is the preferred choice when aiming to find as many candidates as possible in a Southern blot with low stringency conditions.
learn more about gene here
https://brainly.com/question/8832859
#SPJ11
what function do the dorsal fins perform in both sharks and bony fish? what function does the anterior dorsal fin play only in bony fish?
The dorsal fins in both sharks and bony fish serve a number of functions, including Stability, Maneuverability, Braking, and Propulsion.
Stability: The dorsal fins help to keep the fish upright in the water.
Maneuverability: The dorsal fins can be used to help the fish turn and change direction.
Braking: The dorsal fins can be used to slow down the fish.
Propulsion: In some fish, the dorsal fins can be used to help propel the fish forward.
The anterior dorsal fin in bony fish plays an additional role in protecting the fish from predators. The fin is located near the head of the fish, and it can be used to deflect attacks from predators.
In sharks, the dorsal fins are located further back on the body, and they do not play as important a role in protecting the fish from predators. However, the dorsal fins in sharks are still important for stability, maneuverability, and braking.
Here are some additional details about the functions of dorsal fins in sharks and bony fish:
Stability: The dorsal fins help to keep the fish upright in the water by providing a counter-balance to the fish's head and tail. The dorsal fins also help to prevent the fish from rolling over.
Maneuverability: The dorsal fins can be used to help the fish turn and change direction by providing a surface for the fish to push against. The dorsal fins can also be used to help the fish brake by creating drag.
Braking: The dorsal fins can be used to slow down the fish by creating drag. The dorsal fins can also be used to help the fish stop by creating a large surface area that resists the movement of the water.
Propulsion: In some fish, the dorsal fins can be used to help propel the fish forward by creating lift. The dorsal fins do not provide as much propulsion as the pectoral fins and pelvic fins, but they can be used to help the fish move in a straight line.
Protection: The anterior dorsal fin in bony fish can play an important role in protecting the fish from predators. The fin is located near the head of the fish, and it can be used to deflect attacks from predators. The fin can also be used to help the fish hide from predators.
To know more about dorsal fins in sharks, refer here:
https://brainly.com/question/31595371#
#SPJ11
Introductory policy proposal for San Francisco
San Francisco's hiring proposal is to provide employees with breastfeeding breaks and feeding areas.
Employees who regularly work eight or more hours per week in San Francisco are covered by the HCSO. For example, a worker who regularly works eight hours a week in January is a covered worker for the month, even if she has not worked for two months at the end of the quarter.
These supplements are not to be confused with the SF mandate where employees fund the health care of her over 20 corporate restaurant employees. Employer Mandate is the latest term for Healthy San Francisco. SF requires employers to provide health insurance to their employees. Some have chosen to charge a different fee to cover this as well as increase the prices on the menu sometimes a per person fee and sometimes a percentage of the bill.
Learn more about Introductory policy here:-https://brainly.com/question/3006046
#SPJ1
A scientist studied the effect of exposing DNA to various wavelengths of ultraviolet light and determined the number of copying errors made
after exposure. The graph shows the scientist experimental results.
DNA Replication Errors
High
DNA Copying Errors
Low
0 200 250 300 350
Ultraviolet Wavelength (nm)
At which of these ultraviolet wavelengths would a mutation in a skin cell most likely occur?
A.225 nm
B.250 nm
C.275 nm
D.300 nm
Answer:
C. 275 nm
Explanation:
At 275 nm of ultraviolet wavelengths causes mutation in a skin cell because at 275 nm of wavelength, maximum DNA Copying Errors occur in the cells that leads to mutation in the cell. A mutation is a kind of change that occurs in the DNA, due to two reasons, due to mistakes that is occur when the DNA is copied or as the result of environmental factors such as ultraviolet radiations.
a reduced ability to generate tension due to recent exertion of force is known as muscle
A reduced ability to generate tension due to recent exertion of force is known as muscle Muscle fatigue .
It is caused by the depletion of resources within muscles, such as glycogen, ATP, and creatine phosphate, as well as the accumulation of metabolic by-products such as lactic acid. It can occur during a single muscle contraction, over the course of a repetitive activity, or after a period of sustained activity.
Symptoms of muscle fatigue include a decrease in the speed and power of the muscle, a decrease in the range of motion, a decrease in the ability to maintain a given posture, and an increase in the difficulty of exerting force. Muscle fatigue can be managed through proper rest and recovery, as well as proper nutrition and hydration.
know more about glycogen here
https://brainly.com/question/31488365#
#SPJ11
Help pls!!!
A man who has built a cabin on the edge of a forest discovers a termite infestation in his basement. The man plans to get rid of the termites by applying a pyrethroid-based termiticide around the edges of the
basement. Describe two alternate solutions that do not involve chemical pesticides and explain an advantage of each alternate solution. (5 points)
Two alternate solutions to get rid of the termite infestation without using chemical pesticides are:
1. Heat treatment: One effective way to get rid of termites without using chemical pesticides is to expose them to high temperatures. The man can use heat treatment to kill the termites by using specialized heating equipment to raise the temperature in the basement to a level that is lethal to the termites. This method has the advantage of being a non-toxic and chemical-free solution that does not pose any health risks to humans or pets. It can also be a one-time treatment that eliminates the need for ongoing chemical treatments.
2. Bait stations: Another alternative to chemical pesticides is to use bait stations to eliminate the termite colony. Bait stations contain wood that is treated with a slow-acting toxicant that is attractive to termites. Once the termites feed on the bait, they will carry the toxicant back to their colony and spread it to other termites, eventually leading to the death of the entire colony. The advantage of bait stations is that they are non-invasive and do not require any drilling or digging around the house. They are also environmentally friendly and do not pose any health risks to humans or pets.
Both of these alternative solutions are effective in eliminating termite infestations without the use of chemical pesticides. They also have the advantage of being non-toxic and environmentally friendly, which makes them safer for humans, pets, and the environment.
Two alternate solutions to control termite infestation without using chemical pesticides are physical barriers and biological control methods. The first method uses materials like sand or crushed glass which termites can't move through. The second method uses natural enemies of termites like certain parasites or beetles.
Explanation:A man who has built a cabin on the edge of a forest discovers a termite infestation in his basement. Two non-chemical alternatives to using a pyrethroid-based termiticide to control such an infestation include physical barriers and biological control methods.
Physical Barriers These include materials such as sand or crushed glass that termites can't move through. A continuous barrier around the basement can prevent termites from getting to the wood. This method gets rid of the termite infestation without chemicals, protecting possible harm to non-target organisms in the surrounding environment.Biological Control Methods These involve the use of natural enemies of termites such as nematodes (parasitic worms), fungi, or certain types of beetles. These organisms can help keep the termite population in check. The advantage of this method is that it is environmentally friendly and sustainable, and it avoids the use of harmful pesticides.Learn more about Termite Infestation Control here:https://brainly.com/question/34231374
#SPJ2
Analicen el cariotipo humano y den dos ejemplos de pares de cromosomas metacéntricos, dos ejemplos de pares telocéntricos y dos ejemplos de pares acrocéntricos.
Analyze the human karyotype and give two examples of pairs of metacentric chromosomes, two examples of telocentric pairs, and two examples of acrocentric pairs.
Answer: The test that is conducted to evaluate and identity the shape,size and number of chromosomes in cells of organism is called the Karyotype.
Metacentic chromosomes are X - shaped chromosomes. They have centromere at the middle, which makes the arms of the chromosomes equal in length. Therefore any type of chromosomes with equal length of arms is said to be Metacentic. Thus chromosomes on position 1,13, 16 , 19 and 20 are examples.
When a pair of chromosomes showed a regular segregation at anaphase of meiosis, they are said to be telocentric. They are type of chromosomes in which the centromere are located at the terminal ends of the chromosomes, with the telemeres extending from theses ends.Hence during segregation, the ends of telocentric chromosomes are orientated towards the poles of the cells. example is the alphabets ''i'' shaped chromosomes in mice and 29 pairs autosomes in Angora goats.
When the centromere is located in such a way that one arm lenght of a chromosomes is longer than the other, then this is called acrocentric. Example is chromosome 21 of down syndrome.others are 13, 14, 15, 22, and Y-chromosomes.
Explanation:
Cars, airplane wings, and bike helmets are built in a streamlined shape to reduce inertia.
A) True
B) False
Answer:
false
because
The force of gravity causes all objects near Earths surface to fall with an acceleration of 20 m/s.
Need help quiz is here and this is the only answer I don’t know
Answer:
activation energy is the answer
If we want to investigate bacteria, we're going
to have to figure out how to keep them alive. If
we were doing this experiment in class, how
would keep the bacteria we find alive when we
bring samples back to our classroom?
Answer:
in a container with a lid
Explanation:
the lid would keep it aliveand keep in a refrigator
1. Science is a body of knowledge that explains the
Answer:
Science is a body of knowledge that explain the process by which that knowledge is developed.
As the zygote goes through mitosis and creates more cells. Each cell is called a stem cell. In order to become a certain type of cell, these cells will become Or This means they will turn Genes for the type of cell they are becoming, and turn Genes for the type of cell they won't be.
Answer:
differentiated; on; off
Explanation:
As the zygote goes through mitosis and creates more cells. Each cell is called a stem cell. In order to become a certain type of cell, these cells will become differentiated Or This means they will turn Genes on for the type of cell they are becoming, and turn Genes off for the type of cell they won't be.
Stem cells become specialized cells through the process of differentiation. The stem cells all have identical DNA in them. They become specialized for a particular function (s) through the process of differentiation. During this process, some specific genes are either turned on or off. Cells in which the same genes are expressed become specialized for similar functions and can then come together to form a tissue.
The study of tissues using a microscope is called _______________. Thin sections of tissue are fixed, sliced and then stained to enhance contrast.
The study of tissues using a microscope is called histology. Thin sections of tissue are fixed, sliced and then stained to enhance contrast.
Histology is the scientific study of the microanatomy of cells, tissues, and organs using a microscope. Thin sections of tissue are fixed, sliced and then stained to enhance contrast, allowing for better visibility and examination of structures within the tissue. The practice of histology is essential in diagnosing and treating various medical conditions such as cancer, infections, and autoimmune disorders.
Histology plays a crucial role in research as well, providing detailed information about the structure and function of cells and tissues. Through histological examination, scientists can identify and analyze the different cell types, study their behavior, and identify any abnormalities or irregularities. The use of modern techniques and technologies has made histology even more precise and accurate, helping to advance the field of medical science.
Learn more about histology here:
https://brainly.com/question/30762822
#SPJ11
dna replication is referred to as being semi-conservative. what does this mean?
Semi-conservative DNA replication means that each new DNA molecule formed contains one original (conserved) strand and one newly synthesized strand.
During DNA replication, the double-stranded DNA molecule unwinds and each strand serves as a template for the synthesis of a complementary new strand. The process is semi-conservative because each newly synthesized DNA molecule contains one original (conserved) strand and one newly synthesized strand. This was first demonstrated by Meselson and Stahl in 1958 through a series of experiments using heavy isotopes of nitrogen. This type of replication ensures that genetic information is faithfully passed on from one generation to the next.
Learn more about DNA here:
https://brainly.com/question/264225
#SPJ11
Your model helped you demonstrate the chemical process as your body goes through to give you nutrients how do you know those reactions are taking place even though you can’t see them
Answer:
it’s is F :)
Explanation:
1.If a diameter of 1 mm capillary tube is inserted in to the water, what will be the capillary rise in the tube? 2.If a capillary rise of 4 cm is noticed in a capillary tube when the tube is inserted in to water, calculate the diameter of the tube. 3. A capillary tube of 2 mm is inserted in to a 3 litre liquid have a mass of 5 kg. What will be the capillary rise in the tube, if the surface tension is 0.12 N/m ? 4. A capillary rise of 45 mm was noticed, if a capillary tube is inserted into a liquid have a specific weight of 9kN/m3. What will be the radius of the capillary tube, if the surface tension of the liquid is 0.12 N/m ?
1. The value of height(h) is 29.63 mm .
2. Diameter of the capillary tube = 0.25 mm .
3. The value of height (h) is 12.24mm .
4. The value of height (h) is 0.087 mm .
1. The capillary rise is given by the formula: h = (2T cos θ) / ρgr where h is the capillary rise, T is the surface tension of water, θ is the angle of contact between the capillary tube and water, ρ is the density of water, and r is the radius of the capillary tube.
Substituting the values of T, θ, ρ, and r, we get:h = (2 x 0.0728 x cos 0°) / (1000 x 9.8 x 0.0005) = 29.63 mm (approximately)
2. If a capillary rise of 4 cm is noticed in a capillary tube when the tube is inserted into water, calculate the diameter of the tube.
The capillary rise is given by the formula: h = (2T cos θ) / ρgrwhere h is the capillary rise, T is the surface tension of water, θ is the angle of contact between the capillary tube and water, ρ is the density of water, and r is the radius of the capillary tube.
Rearranging the above equation, we get:r = sqrt(2T cos θ / ρg h)Diameter of the capillary tube = 2r.Substituting the values of T, θ, ρ, and h, we get:r = sqrt(2 x 0.0728 x cos 0° / (1000 x 9.8 x 0.04)) = 0.125 mm
3. The capillary rise is given by the formula: h = (2T cos θ) / ρgrwhere h is the capillary rise, T is the surface tension of water, θ is the angle of contact between the capillary tube and water, ρ is the density of water, and r is the radius of the capillary tube.Substituting the values of T, θ, ρ, and r, we get:h = (2 x 0.12 x cos 0°) / (1000 x 9.8 x 0.002) = 12.24 mm
4. The capillary rise is given by the formula: h = (2T cos θ) / ρgrwhere h is the capillary rise, T is the surface tension of water, θ is the angle of contact between the capillary tube and water, ρ is the density of water, and r is the radius of the capillary tube.
Rearranging the above equation, we get:r = sqrt(2T cos θ / ρg h)Substituting the values of T, θ, ρ, and h, we get:r = sqrt(2 x 0.12 x cos 0° / (9000 x 9.8 x 0.045)) = 0.087 mm (approximately)
To know more about surface tension click on below link:
https://brainly.com/question/571207#
#SPJ11
7. A student astronomer went out and took photographs of the Moon that were several days apart.
Images that look like her photographs are shown above. The light part of the Moon appeared to get
smaller over time. Why did this happen?
a
Between the first photograph and the second photograph, the Moon moved farther away
from the sun so less sunlight reached the Moon's surface.
b
Between the first photograph and the second photograph, Earth moved so its shadow was
blocking more of the Moon so the student astronomer was able to see less of it.
с
Between the first photograph and the second photograph, the Moon rotated so that less of
the light-colored rock on the Moon's surface faced Earth.
d
Between the first photograph and the second photograph, the Moon moved so that the
student astronomer was able to see less of the half that faces the sun.
Scroll for more
Answer:yh it is b
Explanation:
A student astronomer went out and took photographs of the moon that were several days apart, and this is because the moon moved so that the student astronomer was able to see less of the half that faces the sun, which is option d.
What is the significance of the moon revolution?The changing appearance of the moon over time is due to its changing position in its orbit around the earth, the light part of the moon appeared to shrink over time as the moon moved in its orbit, causing the illuminated part that faces the earth to diminish and the dark phase to appear.
Hence, a student astronomer went out and took photographs of the moon that were several days apart, and this is because the moon moved so that the student astronomer was able to see less of the half that faces the sun, which is option d.
Learn more about the moon revolution here.
https://brainly.com/question/9950933
#SPJ2
Where does the organic material in soil originate? a. physical weathering b. chemical weathering c. decomposing plant and animal matter d. the atmosphere please select the best answer from the choices provided a b c d
Organic material in soil originate from decomposing plant and animal matter. Microbes decompose dead organisms so that their nutrients go into the soil and are further used by others.
In an ecosystem, plants need resources like water, carbon dioxide, soil minerals, and others to create food, whereas heterotrophs like people and animals like goats deplete the plants' supplies of these substances. Following their demise, these plants and animals become food for bacteria, which break them down and release nutrients into the soil. Plants and other living things can then absorb these nutrients, reintroducing them into the ecosystem.
Different organic compounds and molecules, such as carbon, nitrogen, and others, remain in the soil and then reach the atmosphere in various ways. Animal feces contain organic material, which also makes its way into the soil.
To know more about microbes click here:
https://brainly.com/question/14571536
#SPJ4
Civil engineers want to determine whether the porosity of surface soil affects aquifer recharge rates
Why is the order of amino acids important?
Answer:
Because its the primary structure of the protein
Explanation:
How many times farther from the Sun is Uranus (distance = 19.20 AU) than Saturn (distance = 9.58 AU)?
Answer:
Water is a polar molecule because one area is ________________ and another area is ______________________.
Explanation:
Uranus is approximately 2 times farther from the Sun than Saturn.
What is Uranus?Uranus is a planet in our solar system, orbiting the Sun at an average distance of about 1.8 billion miles (2.9 billion kilometers) or 19.2 astronomical units (AU). It is the seventh planet from the Sun and the third-largest planet in our solar system, with a diameter of about 31,518 miles (50,724 kilometers).
The distance from the Sun to Uranus is 19.20 astronomical units (AU), and the distance from the Sun to Saturn is 9.58 AU. To find how many times farther Uranus is from the Sun than Saturn, we can divide the distance to Uranus by the distance to Saturn:
distance to Uranus / distance to Saturn = 19.20 AU / 9.58 AU = 2.00
Therefore, Uranus is approximately 2 times farther from the Sun than Saturn.
Learn more about Uranus, here:
https://brainly.com/question/9048375
#SPJ2
Which of these will give the MOST accurate and precise measurement of 15mL of liquid to be placed in a test tube?
Answer:
the answer is 25ml graduated cylinder
Explanation:
........................
What two characteristics of life are described in the following statement? “A human begins life as a single cell, whereas an adult is made up of trillions of cells.”
Answer:
Cellular Organization and Growth & Development
Explanation:
The fact that a human is initially defined by "a single cell" and later defined as "trillions of cells" demonstrates that all living things are made up of an organization of cells as cells are the building blocks of all life. The contrast of the single cell with the trillions shows the growth and development from the beginning of life to the fully developed form of an adult human.
antibodies bind to specific antigens because of the three-dimensional shape of the variable regions. true or false
The statement "antibodies bind to specific antigens because of the three-dimensional shape of the variable regions." is True.
Antibodies are proteins produced by the immune system in response to the presence of antigens, which are foreign substances like viruses or bacteria. The variable regions of antibodies are responsible for recognizing and binding to specific antigens based on their three-dimensional shape.
This recognition and binding process is highly specific, meaning that each antibody can only bind to a particular antigen with a complementary shape.
The structure of antibodies is made up of four polypeptide chains, two heavy chains, and two light chains. The variable regions are located at the tips of the arms of the antibody, and they contain hypervariable regions or complementarity-determining regions (CDRs).
The CDRs are responsible for antigen recognition and binding, and they are highly diverse, allowing antibodies to recognize and bind to a wide variety of antigens.
Once an antibody binds to an antigen, it can neutralize or eliminate the antigen through a variety of mechanisms, such as blocking its entry into cells or triggering the destruction of the antigen by immune cells. This process is essential for protecting the body against infection and disease.
To know more about antibodies, visit;
https://brainly.com/question/27931383#
#SPJ11
In G₁ and G₂, what does G stand for?
How many neurons are shown in the circuit in this animation? (select one) A) One neuron B) Two neurons. C) Three neurons D) Four neurons. E) Unable to answer.
The circuit in the animation consists of three neurons. Therefore, the correct option is C) Three neurons.What is a neuron?A neuron is a specialized cell in the nervous system that sends and receives signals. A neuron comprises three parts:
the cell body, dendrites, and an axon.The dendrites get signals from other neurons and pass them on to the cell body.An action potential is produced when enough signals are gathered. The action potential travels down the axon, which is covered in an insulating substance called myelin, to the end of the axon. At the axon terminal, the action potential causes the release of chemical messengers known as neurotransmitters. The neurotransmitters cross the synapse, a small gap between neurons, and bind to receptors on the receiving neuron's dendrites. The process repeats with the receiving neuron sending signals to other neurons.
About AxonAxon are very thin nerve fibers that carry nerve impulses from one neuron (nerve cell) to another neuron. Neurons themselves are responsible for receiving sensory input, sending motor commands to muscles, and transforming and relaying electrical signals throughout these processes.
Learn More About Axon at https://brainly.com/question/14558084
#SPJ11