I WILL GIVE 30 POINTS AND THE BRAINLIEST Project: Metric Recipe
The movement to have metric measurements as the only unit of measurement in the United States is gaining momentum. Believing in being prepared for the possible day the United States will start the conversion process, you have decided to convert the measurements of all your recipes into metric units. (All your recipes currently have the US customary unit of measurements.) The first recipe you decide to convert is your favorite dish.

assignment Directions

You are to convert your favorite recipe that uses only US customary units of measurements to metric units. Search the Internet to locate a conversion chart to help you convert the measurements. You can also search the Internet to locate a recipe.

assignment Guidelines:

Include the title.
Include the original recipe with the US customary unit of measurements.
Include the recipe with converted measurements.
Include a sheet that shows your conversion calculations.
Use a recipe that has at least ten ingredients.
For extra credit you can make the dish, take a picture or video of it, and submit that to your teacher.

Your project should be:

well-organized
contain appropriate language
contain proper grammar, punctuation, and spelling
contain information from credible sources. (Only use credible sources when researching topics. A credible source provides accurate information on the subject matter. If you are using information from a blog, identify the author and check to see if the author is an expert in the field. Some credible sources are government agencies (.gov) educational articles (.edu), and mental health journals.)
Submission Requirements:

Your project should be submitted electronically, double-spaced if it is a writing assignment, submitted by the due date set by the instructor, and original. If direct quotations are included, they should be cited. If you experience technical difficulties submitting your project, inform your instructor right away. Finally, your instructor will inform you how to name the files you submit

The road is in poor condition, slow down.

The essential objective of an car climate control framework is to provide passenger comfort in as quick a time as possible.

A vehicle's climate control system can keep the interior temperature comfortable and adjust airflow. Controlling humidity: Reduces moisture and prevents fogging. Filtering air: Removes pollutants and improves air quality. Defogging & defrosting: Improves visibility during bad weather.

Since warm streams in one heading as it were, from regions of tall temperature to temperature, the climate framework must make a stream by cooling the discuss underneath the surrounding discuss temperature.

Learn more about   climate control system from

https://brainly.com/question/24920322

#SPJ1

Answer:

Thinner and less durable.

Answer:

c, it also depends if the customer dropped the car and left. it would be best to talk to the customer.

Answer:

The answer is 60 because thas EZ but fr thats  the answer

Explanation:

Answer:

Both written and verbal communication skills are of the utmost importance in business, especially in engineering. Communication skills boost you or your teams' performance because they provide clear information and expectations to help manage and deliver excellent work.

Answer:

Developed by the project management institute (PMI) ,the five phases of project management include conception and imitation ,planning ,execuation, performance ,monitoring, and project close .

Answer:

1) The speed of the roller coaster at the bottom is approximately 15.65 m/s

2) The acceleration of the roller coaster at the bottom is 6·g's

3) The high acceleration is 6 times the force of the weight of the  passengers

The high acceleration can cause gravity induced loss of consciousness

4) Please find attached a force diagram of the forces at the bottom of the roller coaster created with Microsoft Visio

5) For the acceleration at the bottom to be 2·g's the radius of the rollercoaster at the bottom should be 25 meters

5) The radius at the bottom of roller coasters are increased to reduce the normal force felt by the passengers as they pass the bottom of a circular roller coaster

Explanation:

1) The given parameters are;

The radius of the roller coaster, r = 5.0 m

The speed of the roller coaster = Minimum = 0 m/s

The shape of the roller coaster's path = Circular loop

Therefore, the maximum height of the roller coaster, h = The diameter of the of a circular path of the roller coaster, d = 2 × r = 2 × 5.0 m = 10.0 m

∴ h = 10.0 m

The minimum speed is f=given by the following equation;

\(F_N = \dfrac{m \cdot v^2}{R} - m \cdot g = 0 \ (At \ the \ top \ of \ the \ roller \ coaster's \ path)\)

Therefore, we have;

\(\dfrac{m \cdot v^2}{R} = m \cdot g\)

From which we have;

v = √(R × g)

Where;

R = The radius of the path of the roller coaster = 5.0 m

g = The acceleration due to gravity = 9.8 m/s² = constant

By plugging in the values of the variable, 'R', and the constant, 'g', we get;

v = √(5.0 m × 9.8 m/s²) = 7 m/s

The minimum speed of the roller coaster, v = 7 m/s

The speed of the roller coaster at the bottom is given by the conservation of energy formula as follows;

The energy at the top of the roller coaster = The energy at the bottom of the roller coaster

∴ The total mechanical energy of the roller coaster, M.E., is constant and at the top, \(M.E._{top}\), is given as follows;

\(M.E._{top}\) = 1/2·m·v₁² + m·g·h₁

At the bottom, the total mechanical energy is given as follows;

\(M.E._{bottom}\) = 1/2·m·v₂² + m·g·h₂

Where;

v₁ = The velocity of the roller coaster at the top = 7 m/s

h₁ = The height of the roller coaster at the top = 10 m

v₂ = The speed of the roller coaster at the bottom

h₂ = The height of the roller coaster at the bottom = 0 m

g = The acceleration due to gravity = 9.8 m/s² = Constant

By plugging in the values, we get;

M.E. = \(M.E._{top}\) = \(M.E._{bottom}\)

∴ 1/2·m·v₁² + m·g·h₁ = 1/2·m·v₂² + m·g·h₂

1/2 × (7 m/s)² + 9.8 m/s² × 10.0 m = 1/2 × v₂² + 9.8 m/s² × 0 m

122.5 m²/s² =  1/2 × v₂²

∴ v₂² = 2 × 122.5 m²/s² = 245 m²/s²

v₂ = √(245 m²/s²) = 7·√5 m/s ≈ 15.65 m/s

The speed of the roller coaster at the bottom, v₂ ≈ 15.65 m/s

2) The normal force on the car at the bottom of the roller coaster is given as follows;

\(F_N = \dfrac{m \cdot v_2^2}{R} + m \cdot g = m \times \left(\dfrac{ v_2^2}{R} + g \right )\)

Force, F = Mass, m × Acceleration, a

∴ F = m×a

Therefore, the acceleration at the bottom, 'a' by comparison of the general equation for force, 'F', and the normal force, \(F_N\), is given as follows;

\(a = \left(\dfrac{ v_2^2}{R} + g \right )\)

Plugging in the values for 'v₂²', 'R', ang 'g', gives;

\(a = \left(\dfrac{ v_2^2}{R} + g \right ) = \left(\dfrac{ 245}{5} + 9.8 \right ) = \left(49+ 9.8 \right ) = (5 + 1) \times 9.8 = 6 \times 9.8 = 6 \times g\)

a = 6·g = 58.8 m/s²

3) The high acceleration will lead to a very high normal force (equal to 6 times each of their weight) experienced by the passengers with a force

The high acceleration is dangerous and can lead to gravity induced loss of consciousness since it is more than 3·g's

4) Please find attached the force diagram at the bottom of the roller coaster created with Microsoft Visio

5) For the acceleration at the bottom to be 2·g's, we have;

\(a = \left(\dfrac{ v_2^2}{R} + g \right )\)

At a = 2·g, we have;

\(2 \cdot g = \left(\dfrac{ v_2^2}{R} + g \right )\)

\(\therefore 2 \cdot g - g = g = \dfrac{ v_2^2}{R}\)

\(R = \dfrac{ v_2^2}{g} = \dfrac{245}{9.8} = 25\)

R = 25 m

The radius at the bottom of the roller coaster should be 25 meters so that only 2·g's is felt

5) The shape of the roller coaster has an increases the radius at the bottom so as to reduce the acceleration of the car

Answer:

Explanation:

The question is asking when one boat is overtaking another boat, the overtaking boat should steer around the slower boat. The slower boat, the vessel being overtaken, is the stand-on vessel.

Only Technician A is right because the decision to repair or replace a damaged part is based on the strength of the steel.

The causes of damage depend on the extreme stress on the part of the steel which significantly affects its strength and thereby leads to the occurrence of damage.

According to the context of this question, technician A's thinking is more accurate behind the repair or replacement of the damaged part. This is because it totally depends on the nature and strength of the steel rather than the skill level of the technician.

Therefore, only Technician A is right because the decision to repair or replace a damaged part is based on the strength of the steel.

To learn more about Technicians, refer to the link:

https://brainly.com/question/18428188

#SPJ1

Answer:

1.\(I_{xc}\) = 7.161458\(\overline 3\) in.⁴

\(I_{yc}\) = 36.661458\(\overline 3\) in.⁴

Iₓ = 28.6458\(\overline 3\) in.⁴

\(I_y\) = 138.6548\(\overline 3\) in.⁴

2. \(I_{xc}\) = 114.\(\overline 3\) in.⁴

\(I_{yc}\) = 37.\(\overline 3\) in.⁴

Iₓ = 457.\(\overline 3\) in.⁴

\(I_y\) = 149.\(\overline 3\) in.⁴

3. The maximum deflection of the beam is 2.55552 inches

Explanation:

1. The height of the beam having a rectangular cross section is h = 2.5 in.

The breadth of the beam, is = 5.5 in.

The moment of inertia of a rectangular beam through its centroid is given as follows;

\(I_{xc}\) = b·h³/12 = 5.5 × 2.5³/12 = 1375/192 = 7.161458\(\overline 3\)

\(I_{xc}\) = 7.161458\(\overline 3\) in.⁴

\(I_{yc}\) = h·b³/12 = 2.5 × 5.5³/12 = 6655/192 = 36.661458\(\overline 3\)

\(I_{yc}\) = 36.661458\(\overline 3\) in.⁴

The moment of inertia about the base is given as follows;

Iₓ = b·h³/3 = 5.5 × 2.5³/3 = 625/24 = 28.6458\(\overline 3\)

Iₓ = 28.6458\(\overline 3\) in.⁴

\(I_y\) = h·b³/3 = 2.5 × 5.5³/3 = 6655/48= 138.6548\(\overline 3\)

\(I_y\) = 138.6548\(\overline 3\) in.⁴

2. The height of the beam having a rectangular cross section is h = 7 in.

The breadth of the beam, b = 4 in.

The moment of inertia of a rectangular beam through its centroid is given as follows;

\(I_{xc}\) = b·h³/12 = 4 × 7³/12 = 114.\(\overline 3\)

\(I_{xc}\) = 114.\(\overline 3\) in.⁴

\(I_{yc}\) = h·b³/12 = 7 × 4³/12 = 37.\(\overline 3\)

\(I_{yc}\) = 37.\(\overline 3\) in.⁴

The moment of inertia about the base is given as follows;

Iₓ = b·h³/3 = 4 × 7³/3 = 457.\(\overline 3\)

Iₓ = 457.\(\overline 3\) in.⁴

\(I_y\) = h·b³/3 = 2.5 × 5.5³/3 = 149.\(\overline 3\)

\(I_y\) = 149.\(\overline 3\) in.⁴

3. The deflection, \(\delta _{max}\), of a simply supported beam having a point load at the center is given as follows;

\(\delta_{max} = \dfrac{W \times L^3}{48 \times E \times I}\)

The given parameters of the beam are;

The length of the beam, L = 22 ft. = 264 in.

The applied load at the center, W = 750 lbs

The modulus of elasticity for Cedar = 10,000,000 psi

The height of the wood, h = 3 in.

The breadth of the wood, b = 5 in.

The moment of inertia of the wood, \(I_{xc}\) = b·h³/12 = 5 × 3³/12 = 11.25 in.⁴

By plugging in the given values, we have;

\(\delta_{max} = \dfrac{750 \times 264^3}{48 \times 10,000,000 \times 11.25} = 2.55552\)

The maximum deflection of the beam, \(\delta _{max}\) = 2.55552 inches

Answer:

Explanation:

the shape on of the earth

Answer:

thank you :)

Explanation:

Answer:

Humans may have smelted iron sporadically throughout the Bronze Age, though they likely saw iron as an inferior metal

Explanation:

there u go

The Field that Jack is in is Engineering. The career path he is on is Lecturing.

Career Pathways is a workforce development technique utilized in the United States to assist people in making the transition from schooling to and through the job.

It entails creating goals and determining the skills and expertise required for an employee to attain them. Career pathing provides a broader perspective than the standard career ladder, which merely lays out "rungs" or levels to ascend.

However, the field in which a person has decided to specialize is the area in which they have decided to gain knowledge and theoretical skill.

Learn more about careers:
https://brainly.com/question/2160579
#SPJ1

The name of a building that is L shaped is Ells.

Building are structures erected to serves as protection for man an animals. It usually have a roof and walls standing  which helps to hold it in place.

An ell is an attachment of a building that is named after its L shape. It is located at a right angle to the building.

Therefore,

The name of a building that is L shaped is Ells

Learn more on building below

https://brainly.com/question/7472215

#SPJ1

Answer:

Combustion

Explanation:

Internal-Combustion engine.

Answer:

over your right shoulder

Explanation:

Answer:

When you want to back out of a parking space, you should do it slowly and look over your right shoulder while backing.

Answer:

you cannot park

Explanation:

except you park in a compound because it is a two way road parking on either side could lead to accident or goslow

Before replacing or adding manual transmission/transaxle fluid, service information should be examined because it may also be engine oil, gear lubricant, or ATF (automatic transmission fluid).

Whether the car has an automatic or manual transmission, as well as whether you're testing the fluid whether it's hot or cold, all affect how you check the transmission fluid. The procedure is as follows: To follow the procedure, you may also watch this video.

Examine the drained transmission fluid for any gold-colored particles. Without enough gear oil, a manual transmission will wear out very fast and will need to be rebuilt or replaced.

To know more about ATF visit :-

https://brainly.com/question/27987306

#SPJ1

Answer:

No

Explanation:

….Repetition

We can see here that the law of resistivity, also known as Ohm's law, states that the electrical resistance of a conductor is directly proportional to its resistivity and length, and inversely proportional to its cross-sectional area.

The Law of resistivity can be mathematically represented as:

R = ρ × (L / A)

Where:

R is the electrical resistance of the conductor,

ρ (rho) is the resistivity of the material,

L is the length of the conductor, and

A is the cross-sectional area of the conductor.

The resistivity (ρ) is a characteristic property of a material that quantifies its ability to resist the flow of electric current. It depends on the nature of the material, its temperature, and sometimes its purity. Resistivity is measured in ohm-meters (Ω·m).

Learn more about resistivity on https://brainly.com/question/30611906

#SPJ1

The answer is -0.016 N, and as it negative, the nature of the force is attractive.

Finding the force of attraction

Coulomb's Law is given by :

\(\boxed {F = \frac{kq_{1}q_{2}}{r^{2}}}\)

Solving

It is critical to note that building a high rise in California, especially within the San Francisco Inlet Zone, comes with its possess interesting set of challenges.

The range is inclined to seismic tremors and other common fiascos, making it vital to take after strict security rules amid development. In expansion, there are concerns almost the affect such a huge building would have on the nearby environment, as well as issues related to activity blockage and lodging accessibility.

Eventually, whether or not the arrange for the high rise is fitting will depend on a number of components, counting its plan, area, and affect on the encompassing community.

Learn more about skyscraper  from

https://brainly.com/question/717259

#SPJ1

Answer:

The answer is a or d hope this helps.

Explanation:

Answer:

Explanation:Most Greeks longed for rule by law with all citizens participating in government. They wanted a democracy.

Answer:

Most Greeks longed for rule by law with all citizens participating in government. They wanted a democracy.

The appropriate faults abs consequences will be:

1  Power Loss  Check all the connections includes power supply and wire connections

2  Solenoid stuck   Air pressure is not controlled

3 Short circuit   Erartic behavior is failed

4 Open circuit   Loss of control signals

5Contaiminated air  Impaired operations of components

6  Leaking lines  Reduced the air pressure.

It's crucial to keep in mind that the precise effects and fixes may change based on how the electropneumatic circuit is really set up and the components that are employed.

An electropneumatic circuit's problems should be precisely identified and fixed by using the right diagnosis and troubleshooting techniques

Learn more about circuit on

https://brainly.com/question/2969220

#SPJ1