hydrochloric acid is usually purchased in a concentrated form that is 37.0% hcl by mass and has a density of 1.20 g/ml . part a how much concentrated solution would it take to prepare 2.85 l of 0.435 m hcl upon dilution with water?
Answers
Total, 3.36 liters of the concentrated solution would it take to prepare 2.85 liters of a 0.435 M HCl solution.
To calculate the amount of concentrated hydrochloric acid solution needed to prepare a diluted solution, you can use the equation;
M₁V₁ = M₂V₂
where; M₁ = initial concentration of the concentrated solution
V₁ = volume of the concentrated solution used
M₂ = final concentration of diluted solution
V₂ = final volume of the diluted solution
In this case;
M₁ = 37.0% = 0.37 (as a decimal)
V₁ = ?
M₂ = 0.435 M
V₂ = 2.85 L
Rearranging the equation, we get;
V₁ = (M₂ × V₂) / M₁
Plugging in the values;
V₁ = (0.435 M × 2.85 L) / 0.37
V₁ ≈ 3.36 L
Therefore, you would need approximately 3.36 liters of the concentrated hydrochloric acid solution.
To know more about hydrochloric acid here
https://brainly.com/question/24784580
#SPJ4
Related Questions
How many liters are in 4.65 E 23 molecules of F2?
Answers
I need more points sorry
Answer:
\(\boxed {\boxed {\sf 17.3 \ L \ F_2}}\)
Explanation:
First, we must convert molecules to moles.
We use Avogadro's Number: 6.022*10²³. This number tells us the amount of particles (atoms, molecules, etc.) in 1 mole of a substance. In this case, it is molecules of F₂
\(\frac{ 6.022*10^{23} \ molecules \ F_2}{1 \ mol \ F_2}\)
Multiply by the given number of molecules.
\(4.65 *10^{23} \ molecules \ F_2*\frac{ 6.022*10^{23} \ molecules \ F_2}{1 \ mol \ F_2}\)
Flip the fraction so the molecules of fluorine cancel.
\(4.65 *10^{23} \ molecules \ F_2*\frac{1 \ mol \ F_2 }{6.022*10^{23} \ molecules \ F_2}\)
\(4.65 *10^{23} *\frac{1 \ mol \ F_2 }{6.022*10^{23} }\)
\(\frac{4.65 *10^{23} \ mol \ F_2 }{6.022*10^{23} }=0.7721687147 \ mol \ F_2\)
Next, convert the moles to liters. Assuming this is at STP (standard temperature and pressure), there are 22.4 liters in 1 mole of any gas.
\(\frac {22.4 \ L \ F_2} {1 \ mol \ F_2}\)
Multiply by the number of moles we calculated.
\(0.7721687147 \ mol \ F_2*\frac {22.4 \ L \ F_2} {1 \ mol \ F_2}\)
The moles of fluorine cancel.
\(0.7721687147 *\frac {22.4 \ L \ F_2} {1 }\)
\(0.7721687147 *\ {22.4 \ L \ F_2} =17.29657921 \ L \ F_2\)
The original measurement has 3 significant figures (4, 6, and 5), so our answer must have the same. For the number we calculated, that is the tenth place. The 9 in the hundredth place tells us to round the 2 up to a 3.
\(17.3 \ L \ F_2\)
There are approximately 17.3 liters of fluorine.
18. Consider the information about carbon provided in Model 4.
a. Are diamonds and graphite made from the same element?
Answers
Answer:
yes
Explanation:
By applying VSEPR theory, identify the most likely shape (geometry) for each of the following molecules. Not yet Hint: Draw an electron dot diagram for each molecule. answered Marked out of CIF Choose... 5.00 Flag CH,S Choose... linear question trigonal pyramidal Tecl2 tetrahedr CH-F2 V-shaped trigonal planar AS 3 Choose...
Answers
According to the VSEPR (Valence Shell Electron Pair Repulsion) theory, the most likely shape or geometry of a molecule is determined by the arrangement of electron pairs around the central atom. ]
To identify the shape, we need to draw the electron dot diagram for each molecule.
1. CH2S: The central atom is carbon (C). Carbon has 4 valence electrons, hydrogen (H) has 1 valence electron, and sulfur (S) has 6 valence electrons. To satisfy the octet rule, carbon forms 4 single bonds with hydrogen and sulfur. The electron dot diagram shows that carbon is surrounded by 4 electron pairs, resulting in a tetrahedral geometry.
2. CHF2: The central atom is carbon (C), and it has 4 valence electrons. Carbon forms a single bond with hydrogen (H) and two single bonds with fluorine (F). The electron dot diagram shows that carbon is surrounded by 3 electron pairs, resulting in a trigonal planar geometry.
3. As3: The central atom is arsenic (As), and it has 5 valence electrons. Arsenic forms 3 single bonds with three other atoms. The electron dot diagram shows that arsenic is surrounded by 4 electron pairs, resulting in a tetrahedral geometry.
4. TeCl2: The central atom is tellurium (Te), and it has 6 valence electrons. Tellurium forms 2 single bonds with chlorine (Cl). The electron dot diagram shows that tellurium is surrounded by 3 electron pairs, resulting in a V-shaped or bent geometry.
Therefore, the most likely shape (geometry) for each of the molecules is:
1. CH2S - tetrahedral
2. CHF2 - trigonal planar
3. As3 - tetrahedral
4. TeCl2 - V-shaped (bent)
Remember, the VSEPR theory helps us predict the molecular geometry based on the arrangement of electron pairs around the central atom.
To know more about VSEPR visit:
https://brainly.com/question/30712033
#SPJ11
What element is this? In my family there are non-metals, metalloids, and metals. I am commonly used in the canning business and sometimes give soup a distinct taste. I've been known to "cry" if you've bend me too hard.
Answers
The element that has in its family non-metals, metalloids, and metals, which is commonly used in the canning business and sometimes give soups a distinct taste and that is also been known to "cry" if you bend it too hard is tin.
What is tin?
Tin is a chemical element found in the periodic table with atomic number 50 and which has the symbol Sn.
The characteristics of tin include:
Tin is a silver-colored metal.Tin is a soft metal such that it can be cut even when little force is appliedPure solid tin has a shiny lustrous appearance as is similar to most metals.Because of its high resistance to corrosion and soft nature, tin has been used for a wide variety of purposes which include:
it is used in the electroplating of steel cans used as food containers,it is used together with other metals in producing bearingsIt is used in soldering worksLearn more about tin at: https://brainly.com/question/2272323
#SPJ1
during chemiosmosis in aerobic respiration, protons are pumped __________.
Answers
Electrons are passed through a series of redox reactions, and each transfer causes protons to be pumped across the membrane. This creates a concentration gradient, which is used to power ATP synthesis through the process of chemiosmosis.
During chemiosmosis in aerobic respiration, protons are pumped across the inner mitochondrial membrane from the matrix to the intermembrane space.
Aerobic respiration is a process of producing energy that involves the complete breakdown of glucose in the presence of oxygen. It is a crucial metabolic pathway that is present in all higher organisms, including humans.Chemiosmosis is the process in which a transmembrane electrochemical gradient drives ATP synthesis. It is an important part of cellular respiration and oxidative phosphorylation.
During the process of oxidative phosphorylation, protons are pumped across the inner mitochondrial membrane, which creates a proton gradient that powers the synthesis of ATP. In aerobic respiration, the electron transport chain (ETC) is the primary mechanism that generates the proton gradient.
Electrons are passed through a series of redox reactions, and each transfer causes protons to be pumped across the membrane. This creates a concentration gradient, which is used to power ATP synthesis through the process of chemiosmosis.
to know more about Aerobic respiration visit :
https://brainly.com/question/11874459
#SP11
A 5.0 g piece of metal at 100c is cooled to 15c.It releases 318.3 J of heat in the process.Calculate the specific heat of the metal
Answers
Answer:
Water has a very high heat capacity, which makes it useful for radiators ... the temperature change that a given substance will undergo when it is either heated or cooled. ... The heat that is either absorbed or released is measured in joules. ... A 15.0 g piece of cadmium metal absorbs 134 J of heat while rising from 24.0°C to ...
As water boils, it becomes a gas. Which statement about a gas is correct?
O
A
A. A gas has a volume that can change.
B. A gas has fixed volume.
OC. A gas has a fixed shape.
SUBM
Answers
Answer:
A. A gas has a volume that can change.
When water boils do the H2O molecules break or do they stay together just in a gas form?
The H2O molecules themselves do not "change into a gas state" when water boils. Water molecules remain water molecules regardless of circumstance.
The unseen molecular ties that hold the molecules together do alter.
It’s these bonds that dictate whether water is ice, liquid, or steam.
So what we’re interested in is what happens to the bonds when water boils.
In this case, chemical bonding play a role. Two different types of chemical bonds exist:
Between molecules, the first kind exists. They are known as intermolecular bonds, because they keep molecules like H2O connected to one another.
Between molecules, a wide variety of forces are at work. In the image below, a unique type of bond known as James—er, I mean Hydrogen—holds water molecules together. Hybrid Bond. The Nitrogen, Oxygen, or Fluorine atom in one molecule interacts with the Hydrogen atom in another molecule to form a hydrogen bond, which effectively draws the two molecules together.
Of course, it also dons a tux. Its most distinctive quality is that.
Between individual atoms is where the second type of chemical connection may be found.
They are known as intramolecular bonds, and they keep atoms together, such as the hydrogen and oxygen in H2O.
Unfortunately, I can't give an example of an intramolecular connection because they don't dress in tuxedos or resemble Daniel Craig. That is how reserved intramolecular bonds are.
Which is that? Do you still desire a photo? OK, I see. Fine.
The bonds between the molecules and atoms that make up some hydrogen chloride (HCl), often known as hydrochloric acid, are shown in the following image: (Attachment #2)
Let's return to the water now. What transpires when it is boiled?
Well, when water is heated to a boiling point, it changes into steam, which is really water in a gaseous state. It sort of vanishes from vision as it floats up into the air.
Which of the two molecular bonds will break now—the intramolecular ones or the intermolecular ones?
If the intramolecular bonds disintegrated:
The bonds between the H and O atoms break down; there is no longer anything holding the atoms of H2O together.
The atoms are now happier to let the molecule to disintegrate into two hydrogen atoms and one oxygen atom, giving us... not water, but Dobby with a rotten sock.
You see, water is made up of two hydrogen atoms chemically bound to an oxygen atom. We would not have water if the chemical link hadn't existed. It can't be the intramolecular bonds that break since we know that boiling water produces steam, which is still water.
On a side note, intramolecular bonds are REALLY strong. 100 degrees celsius, the boiling point of water (212 degrees Fahrenheit for you Americans), is not nearly enough energy to break them apart.
However, if the INTERmolecular bonds disintegrated:
The H2O molecules' bonds are broken.
The molecules are now far apart from one another since Daniel Craig is no longer holding them at gunpoint together. The molecules are now less dense than liquid water and even air itself because of their increased distance from one another.
The molecules can now float into the air as a result. We regrettably lack James Bond's virtue of being Hydrogen Bond, so we perceive this as steam rising from a boiling pot of water.
Alas.
A group of symbols that show the number of atoms in a compound is called
Answers
The group of symbols that show the number of atoms in a compound is called a chemical formula. A chemical formula is a representation of a chemical compound using symbols for the atoms present.
A chemical formula shows the types and numbers of atoms in the compound. For example, the chemical formula for water is H₂O, which means it is composed of two hydrogen atoms and one oxygen atom. Similarly, the chemical formula for table salt is NaCl, which means it is composed of one sodium atom and one chlorine atom.
Chemical formulas are important in chemistry because they allow scientists to communicate information about compounds in a concise and standardized way. They also provide information about the relative proportions of the atoms in a compound, which is useful in determining its properties and behavior.
Learn more about chemical formula here:
https://brainly.com/question/31713710
#SPJ11
The its motion______ energy of an object is related to both the object's position and it's motion.
O A) kinetic
OB) potential
C) mechanical
Answers
Answer:
mechanical
Explanation:
cause mechanical energy is the sum of potential and kinetic enery
a sample of gas held at constant volume is raised from 34.0 atm to 5.90 atm. if the final temperature of the sample is 340.0 K, what was its initial temperature
Answers
Answer
To answer this question we need to use the following equation
P1/T1 = P2/T2
We can rearrange to make T1 subject of the formula as shown
T1 = (P1 x T2)/ P2
= (3.40 x 340)/ 5.90
= 195.9 K
what volume of 0.415 m silver nitrate will be required to precipitate as silver bromide all the romide in 35.0 ml of 0.128 m calcium bromide?
Answers
The volume of 0.415 M silver nitrate needed to precipitate all the bromide in 35.0 mL of 0.128 M calcium bromide is 5.41 mL.
There are different ways to approach stoichiometry problems, but one common method is to use the balanced chemical equation, the molar ratios, and the concentration-volume relationships.
The balanced chemical equation for the precipitation reaction between silver nitrate and calcium bromide:AgNO3(aq) + CaBr2(aq) → AgBr(s) + Ca(NO3)2(aq)
Determine the limiting reactant and the theoretical yield of silver bromide.
Use the molar mass of AgBr to convert its moles to grams or volume of the precipitate.
The moles of calcium bromide:moles of CaBr2 = concentration × volume (in liters)moles of CaBr2 = 0.128 mol/L × 0.035 Lmoles of CaBr2 = 0.00448 mol
Use the molar ratio between CaBr2 and AgNO3 to find the moles of AgNO3 needed to react with all the bromide ions.
moles of AgNO3 = moles of CaBr2 × (1 mol AgNO3/1 mol CaBr2)moles of AgNO3 = 0.00448 mol × (1 mol AgNO3/2 mol Br-)moles of AgNO3 = 0.00224 mol
Since the stoichiometry of the reaction is 1:1 for AgBr and AgNO3, the theoretical yield of AgBr is also 0.00224 mol.
The volume of 0.415 M AgNO3 needed to provide the theoretical yield of AgBr.
Use the concentration-volume relationship to find the volume of AgNO3 that contains the same amount of moles as the theoretical yield of AgBr.
Moles of AgNO3 = 0.00224 molvolume of AgNO3 = moles of AgNO3/concentration of AgNO3volume of AgNO3 = 0.00224 mol/0.415 mol/Lvolume of AgNO3 = 0.00541 L or 5.41 mL
Therefore, the volume of 0.415 M silver nitrate needed to precipitate all the bromide in 35.0 mL of 0.128 M calcium bromide is 5.41 mL.
to know more about silver nitrate refer here:
https://brainly.com/question/29627918#
#SPJ11
What is the electron configuration of Iron
Answers
The electron configuration of Iron is:
[Ar] 3d⁶4s²
how do you balance _KCIO3 + __P4 → _P4010 + ___KCI
Answers
According to the
graph, what happens
to the concentration
of A over time?
Concentration (M)
Reaction: 2A A₂
Time (sec)
A. It decreases and then levels out.
B. It decreases consistently.
C. It increases and then levels out.
D. It increases consistently.
Answers
The concentration of A decreases and then levels out. Option A
How does concentration of the reactant change?
In many chemical reactions, a reactant is consumed as the reaction progresses, leading to a decrease in its concentration over time. The reactant molecules are transformed into products, and as the reaction proceeds, the concentration of the reactant gradually diminishes.
At equilibrium, the concentrations of both reactants and products remain relatively constant over time, although they can coexist.
Learn more abaout reactant:https://brainly.com/question/30129541
#SPJ1
Help with this question which I attached a picture of
Answers
\(\huge\underline\mathtt\colorbox{cyan}{A. Element L}\)
Explanation:
Because the unidentified element has exactly the same Bright-Line Spectra of wavelength in nanometeres as does element L.
\(\huge\bold{\purple{\bold{⚡BeBrainly⚡}}} \)
The balloon in this image was rubbed with a piece of wool material. Now, it is negatively charged. What force allows the charged balloon to "pick up" the small pieces of paper off of the table?
The negatively charged balloon is attracted to negative static charges in the paper..
The negatively charged balloon is attracted to the north pole of the paper pieces.
The negatively charged balloon is attracted to the south pole of the paper pieces.
The negatively charged balloon is attracted to the positive static charges in the paper.
What is the best explanation of electric current in a wire?
Electrons build up in the wire and create a charge.
Electrons flow because of electrical attraction and repulsion.
Protons are pushed along by electric forces.
Atoms move because of heat.
Why does the light bulb in a circuit turn on when you close the switch?
The switch absorbs the electrical energy.
The switch changes the direction of the flow of electrons.
Closing the switch completes the circuit, making it a closed circuit.
The switch changes the circuit from series to parallel.
Earth is dipolar, like a bar magnet.
What does this mean about its magnetic poles?
There is only a magnetic south pole.
There is only a magnetic north pole.
There are both magnetic north and south poles.
There are two magnetic north poles.
Which arrangement described below would result in magnetic poles that attract one another?
North Pole + South Pole
South Pole + West Pole
East Pole + North Pole
North Pole + North Pole
Why is an electromagnet a temporary magnet?
An electromagnet only attracts other permanent magnets.
An electromagnet becomes a magnet when a current flows through the wire. An electromagnet no longer acts as a magnet when the current flow stops.
An electromagnet cannot be turned on and off.
An electromagnet is a magnet when no current flows through the wire. The electromagnet no longer acts as a magnet when current flows through the wire.
What set of materials listed below could be used to create a complete electromagnet?
wires and battery
iron nail and battery
iron nail, magnet, and wire
battery, iron nail, copper wire
Where is a bar magnet's magnetic field the strongest?
red part of the magnet
longest part of the magnet
magnetic poles (N + S)
center of the magnet
A(n) ___________ is represented in the diagram it converts electrical energy into mechanical motion.
generator
electromagnet
parallel circuit
motor
Answers
Answer:
I actually have no idea
Explanation:
Sorry my man
Answer:
Explanation:
generator
Which of the following correctly identifies an acid-base pair?
HCl, NaOH
H2CO3 , CO32-
H3O+ , OH-
NH3, NH4+
Answers
An acid-base pair is correctly identified by HCl, and NaOH.
The acid and the base that make up an acid-base pair are called the conjugate acid-base pair. The acid is a proton (H+) donor, whereas the base is a proton (H+) acceptor. In general, the base is a molecule that is not a hydrogen ion (H+) or a hydronium ion (H3O+).
The acid, on the other hand, is the molecule that donates a proton. In the reaction, the base is transformed into an acid, and the acid is transformed into a base.HCl and NaOH can be identified as an acid-base pair since NaOH is the base, and HCl is the acid. HCl is a hydrogen chloride acid, and NaOH is a sodium hydroxide base.
In the chemical reaction of HCl and NaOH, the acid and the base react to form a neutral compound, which is salt and water, according to the reaction HCl + NaOH → NaCl + H2O.H2CO3 and CO32- are not a correct acid-base pair because both are anions (ions with a negative charge).H3O+ and OH- are the correct acid-base pair because H3O+ (hydronium ion) is an acid, and OH- (hydroxide ion) is a base.
However, the question asks for the correct pair of acids and bases.NH3 and NH4+ are not correct acid-base pairs because both are bases. The acid NH3 and the base NH4+ are conjugate pairs, according to the reaction NH3 + H+ → NH4+.
Therefore, the correct answer is HCl, and NaOH since they represent an acid-base pair.
Learn more about Acid-base at https://brainly.com/question/12883745
#SPJ4
in the reaction c2h4 3o2 → 2co2 2h2o, which is the limiting reagent if 2.70 mol c2h4 reacts with 6.30 mol o2? (2 points)
Answers
The limiting reagent in this reaction is o2, and the amount of CO2 that can be formed is 4.20 mol.
To determine the limiting reagent in a reaction, we need to calculate the amount of product that can be formed by each reagent and then compare those amounts.
Using the balanced equation c2h4 + 3o2 → 2co2 + 2h2o, we can see that for every 1 mole of c2h4, we need 3 moles of o2 to react completely.
So, if 2.70 mol of c2h4 is reacting, we would need (\frac{3}{1}) * 2.70 = 8.10 mol of o2 for complete reaction. However, we only have 6.30 mol of o2, which means that o2 is the limiting reagent.
Therefore, the amount of product that can be formed will be determined by the amount of o2, and we can calculate the amount of product (in moles) using the amount of o2:
6.30 mol o2 * (\frac{2 mol CO2 }{ 3 mol O2}) = 4.20 mol CO2
learn more about limiting reagent Refer: https://brainly.com/question/11848702
#SPJ11
This type of intermolecular force relates to the
big difference in the electronegativities. It exists
when N, O or F atom attracts with hydrogen
atom. Medium strength of attraction is
exhibited
Answers
The type of intermolecular force relates to the big difference in the electronegativities and is known as hydrogen bonding.
What are intermolecular forces?Intermolecular forces may be defined as the mechanism that mediates the interaction between the atoms of the molecules. It significantly includes the electromagnetic forces of attraction and repulsion between the atoms.
Some examples of intermolecular forces include London-dispersion force, dipole-dipole interaction, van der Waals interaction, hydrogen bonds, etc. Each one of them possesses a different set of characteristic properties distinctly. Some types of forces are also present in the body of living organisms.
Hydrogen bonding is a characteristic kind of interaction that remarkably includes dipole-dipole attraction between the most electronegative elements like Nitrogen, Oxygen, fluorine, etc., and the hydrogen atom.
Therefore, hydrogen bonding is a type of intermolecular force relates to the big difference in the electronegativities.
To learn more about Intermolecular forces, refer to the link:
https://brainly.com/question/13588164
#SPJ2
Which term represents the fixed proportion of elements in a compound?
1.
atomic mass
2.
molar mass
3.
chemical formula
4.
density formula
Answers
Answer:
atomic mass
because skkskssjsjjsjsjsj skskskkskske sjjsjsjsk
what is a conclusion that ernest rutherford made after his experiments with alpha particles and gold foil?
Answers
Rutherford's -particle scattering experiment provides the empirical support for drawing the inference that the majority of atomic space is empty.
what is gold foil experiment?
Rutherford described the gold-foil experiment.
The α-particles in his experiment were made to land on a thin piece of gold foil.
The gold foil was linearly penetrated by the majority of the α-particles.
A few of the particles made slight angular deviations.
Every 12000 particles, one of them seemed to bounce.
Rutherford's atomic model's conclusion
The majority of the -particles went through the gold foil without deflecting, leaving essentially no space inside the atom.
Since the positive charge takes up the smallest amount of space, very few particles are likely to have been deflected off their course.
Indicating that all of the positive charge and mass of the gold atom were concentrated in a very compact volume within the atom, a very small percentage of -particles were redirected by 180°.
To learn more about gold foil experiment https://brainly.com/question/4091109
#SPJ4
Most transition metals can exist in more than one oxidation state, and as such, can form oxides with different formulas. If a basic solution containing 1.89 g of dissolved copper(II)chloride dihydrate (molar mass = 170.48 g/mol) is reacted with excess hydrazine, N2H4, a red form of copper oxide is created. If that solid is isolated, it has a mass of 0.79 g after drying.
What is the formula of this copper oxide?
Did the oxidation state of copper change during this reaction?
Answers
Answer:
- The formula of the formed copper oxide is Cu₂O
- The oxidation state of copper does change from (II) to (I), because copper is reduced.
Explanation:
Hydrazine (N₂H₄) is a well known reducing agent, so it reduces copper(II)chloride (CuCl₂). The oxidation state of Cu in CuCl₂ is +2:
CuCl₂ → Cu²⁺ + 2 Cl⁻
Thus, when Cu²⁺ is reduced to an oxide, it is formed copper(I) oxide (Cu₂O), which is a red solid. According to this, we can conclude:
- The formula of the formed copper oxide is Cu₂O.
- The oxidation state of copper does change from (II) to (I), because copper is reduced.
the volume of the compartment that holds this reaction inside your cars steering column is approximately 0.050 l before the airbag inflates. Calculate the pressure in this compartment if it could hold the same number of moles of n2 from above at a temp of 45.0 c
Answers
The pressure in the compartment would be approximately 52.29 atmospheres
The ideal gas law equation can be applied here: PV = nRT
where P is the pressure (in atmospheres or Pascals).
Volume (measured in litres)
The number of moles is n.
R = 0.0821 L atm/mol K, the ideal gas constant.
Temperature (in Kelvin) equals T.
The provided temperature must first be converted from Celsius to Kelvin:
T(K) equals T(°C) plus 273.15 K = 45.0 + 273.15 K = 318.15 K
We may rearrange the ideal gas law equation to solve for pressure if the volume is 0.050 L, we want to determine the pressure, and we have the same number of moles of N2 as in the prior situation.
P = (nRT) / V
P = (1 mol * 0.0821 L atm/mol K * 318.15 K) / 0.050 L P = 52.29 atm is the result of substituting the variables.
Consequently, 52.29 atmospheres would be the compartment's pressure.
for more questions on Pressure
https://brainly.com/question/24719118
#SPJ8
Write this measurement in scientific notation: 0.000130 L
Answers
Answer:1.30 x 10 to the 4th
Explanation:
Just know
How many mL of 0.45 M CaCl2 have 14.15 g of CaCl2 in them?
Answers
In a liter of 0.15 M \(CaCl\)₂, there are 0.15 moles of \(CaCl\)₂. Calculating it in grams.
1 mole \(CaCl\)₂ = 110.98 g
16.65 g \(CaCl\)₂ in 1 liter from 0.15 moles \(CaCl\)₂ x 110.98 g/mole
So, it needs \(CaCl\)₂—54 g—in liters (or milliliters)
3.24 L or 3240 ml is equal to 16.65 g/L or 54 g/L.
Alternatively put:
You get 54 g of \(CaCl\)₂ converted to moles.
54 g x 1 mole/110.98 g = 0.487 moles of \(CaCl\)₂ in 3.24 L, or 3240 ml of solution.
According to the chemical formula for \(CaCl\)₂, there are two moles of \(Cl_{1} -\)and one mole each of the total ions \(Ca_{2}+\) and \(Cl_{1} -\) in every mole of the molecule.
The amount of solute that dissolves in one liter of solution is measured by a substance's molarity (M). Divide the number of moles of solute by the liters of solution volume to determine the molarity of a solution: Molarity (M) = moles of solute/liters of solution = molL.
To know more about molarity of \(CaCl\)₂,click on the link below:
https://brainly.com/question/16601268
Q: Given the following information, determine the beta
coefficient for Stock L that is consistent with equilibrium: =
11.5%; rRF = 3.5%; rM = 10.5%. Round your answer to two decimal
places.
Q:Given th
Answers
Beta measures the sensitivity of a stock's returns to the overall market returns. A beta greater than 1 indicates that the stock is expected to be more volatile than the market, while a beta less than 1 suggests that the stock is expected to be less volatile than the market.
To determine the beta coefficient for Stock L, we need to use the formula:
\(Beta = (rL - rRF) / (rM - rRF)\)
where rL represents the return on Stock L, rRF represents the risk-free rate, and rM represents the return on the market.
Given the information provided:
\(rL = 11.5%\)
\(rRF = 3.5%\)
\(rM = 10.5%\)
Plugging these values into the formula, we have:
\(Beta = (0.115 - 0.035) / (0.105 - 0.035)\)
\(= 0.08 / 0.07\)
\(≈ 1.14\)
Therefore, the beta coefficient for Stock L is approximately 1.14
In this case, Stock L has a beta coefficient of approximately 1.14, indicating that it is expected to be more volatile than the market.
To know more about coefficient visit:
https://brainly.com/question/13431100
#SPJ11
Select True or False.
Social Security is normally paid out in the lump payment upon  retirement
Answers
Answer:
TRUE MY DOOD
Explanation:
EXAMPLE 6 Finding Linear and Angular Speed A boy rotates a stone in a 3-ft-long sling at the rate of 15 revolutions every 10 sec- onds. Find the angular and linear velocities of the stone. SOLUTION In 10 s the angle θ changes by 15.2m-30π rad. So the angular speed of the stone is o30 rad -3m rads -3T rad/s 10s The distance traveled by the stone in 10 s is s = 15 . 2tr-15-2π-3 = 90π ft. So 90π ft the linear speed of the stone is t 10s
Answers
The angular speed of the stone is 3π rad/s (since 15 revolutions = 30π radians, and it takes 10 seconds to complete those revolutions). The linear speed of the stone is 90π/10 ft/s = 9π ft/s (since the distance traveled by the stone in 10 seconds is 90π feet).
In this problem, we are asked to find the angular and linear velocities of a stone that is being rotated in a sling. We are given that the sling is 3 feet long and that the stone completes 15 revolutions in 10 seconds. To find the angular velocity, we use the formula: angular speed = change in angle/time. Since the stone completes 15 revolutions, the change in angle is 152pi radians. Dividing by time, we get an angular speed of 3*pi radians per second.
To find the linear velocity, we need to find the distance traveled by the stone in 10 seconds. Since the sling is 3 feet long, the stone travels a distance of 2pi3 feet for every revolution. Multiplying by the number of revolutions in 10 seconds, we get a distance of 90 pi feet. Dividing by the time, we get a linear velocity of 9pi feet per second.
Therefore, the angular velocity of the stone is 3pi radians per second and the linear velocity is 9pi feet per second.
learn more about velocities here:
https://brainly.com/question/28710636
#SPJ11
What is a saturated solution? A solution with as much dissolved solute as it can hold at a given temperature. A heated solution with more dissolved solute than it can hold at a lower temperature. A solution that holds less dissolved solute than is possible at a given temperature. A solution that holds as much solvent as possible at all temperatures
Answers
Answer:
It is A, A solution with as much dissolved solute as it can hold at a given temperature.
Explanation:
A saturated solution may be characterized as a solution with as much dissolved solute as it can hold at a given temperature. Thus, the correct option for this question is A.
What are the characteristics of the saturated solution?The characteristics of the saturated solution are as follows:
It contains the maximum number of solute particles that are able to be dissolved. For example, a soda represents an example of a saturated solution of carbon dioxide in water. It forms bubbles when the pressure is liberated.According to the context of this question, a solution that holds less dissolved solute than is possible at a given temperature represents the properties of an unsaturated solution that does not form any kind of bubbles. For example, sodium chloride in water.
Therefore, a saturated solution may be characterized as a solution with as much dissolved solute as it can hold at a given temperature. Thus, the correct option for this question is A.
To learn more about Saturated solutions, refer to the link:
https://brainly.com/question/2078413
#SPJ2
An element that is brittle but is a moderate conductor of electricity is classified as a.... non-metal, metal or metalloid, metalloid, metal
Answers
Answer:
non metal
Explanation:
HOPE THIS HELPS!!!