HURRY I HAVE 10 MINS LEFT!!!!

According to the U.S. Bureau of Labor Statistics, which of the following occupations earns the highest annual salary?


medical equipment repairers

magnetic resonance technologist

nuclear medicine technologist

radiologic technologist

d. logistics and inventory management is an integral part of supply chain management.

What is supply chain management (SCM)?
Supply chain management (SCM) is the process of optimising the creation and flow of a product, from raw material sourcing to production, logistics, and delivery to the final customer.

SCM refers to the integrated planning and execution of processes necessary to manage the movement of materials, information, and financial capital in activities such as demand planning, sourcing, production, inventory management and storage, transportation (or logistics), and returning excess or defective products. To function, supply chain management requires a combination of business strategy, specialised software, and collaboration.

Because it is such a large and complex undertaking, each partner – from suppliers to manufacturers and beyond – must communicate and collaborate in order to create efficiencies, manage risk, and adapt quickly to change.

To learn more about inventory management, visit: https://brainly.com/question/29741259

#SPJ4

Answer:

Explanation:

In the Resource Conservation and Recovery Act (RCRA), generators, transporters, and Treatment, Storage, and Disposal Facilities (TSDFs) of hazardous waste are each required to comply with the hazardous waste manifest system. The specific provisions outlining these requirements can be found in different sections of RCRA.

Generators: The requirements for generators to comply with the hazardous waste manifest system are outlined in 40 CFR Part 262, specifically Subpart B - Pre-Transport Requirements. This section of RCRA details the responsibilities of generators in properly identifying, documenting, and packaging hazardous waste for transportation. Generators are required to prepare a manifest (EPA Form 8700-22) for each shipment of hazardous waste and provide copies of the manifest to the transporter and the designated TSDF.

Transporters: The requirements for transporters to comply with the hazardous waste manifest system can be found in 40 CFR Part 263, specifically Subpart C - Manifest System, and Subpart E - Transportation. These sections of RCRA outline the obligations of transporters in handling, transporting, and delivering hazardous waste. Transporters are responsible for ensuring that they have a properly completed manifest for each shipment of hazardous waste they transport, and they must sign the manifest to acknowledge receipt of the waste from the generator and provide a copy of the signed manifest to the designated TSDF.

TSDF Facilities: The requirements for TSDF facilities to comply with the hazardous waste manifest system are covered in 40 CFR Part 264 (for hazardous waste treatment, storage, and disposal facilities) and Part 265 (for interim status facilities). These sections of RCRA specify the obligations of TSDFs in receiving, managing, and documenting the hazardous waste they receive. TSDFs are required to sign the manifest upon receipt of the waste, verify the information, and keep a copy of the manifest as part of their records.

It's important to note that these are general references to the relevant sections of RCRA where the requirements for compliance with the hazardous waste manifest system can be found. The actual details and specific provisions may be subject to further interpretation and regulatory updates.

The probability calculations for the given scenarios can be performed using the normal distribution with a mean of 1200 and a standard deviation of 80.

To calculate the probabilities, we can use the standard normal distribution table or statistical software such as R or Python.

a. To find the probability of a selected engine having a capacity greater than 1260, we calculate the z-score as (1260 - 1200) / 80 = 0.75. Using the z-score table or software, we find the probability associated with a z-score of 0.75.

b. For the probability of a selected engine having a capacity greater than 950, we calculate the z-score as (950 - 1200) / 80 = -3.125. Again, using the z-score table or software, we find the probability associated with a z-score of -3.125.

c. To determine the probability of a capacity of 1240 or less, we calculate the z-score for 1240 as (1240 - 1200) / 80 = 0.5. We find the probability associated with a z-score of 0.5.

d. The probability of a selected engine having a capacity less than 1130 can be calculated by finding the z-score for 1130 as (1130 - 1200) / 80 = -0.875. We find the probability associated with a z-score of -0.875.

e. For the probability of a capacity between 1100 and 1150, we calculate the z-scores for both values as (1100 - 1200) / 80 = -1.25 and (1150 - 1200) / 80 = -0.625. Then, we find the probabilities associated with these z-scores and calculate the difference between them to obtain the desired probability.

Learn more about: probability

brainly.com/question/31828911

#SPJ11

Equal-tangent crest vertical curve connects a 2% initial grade with a -1% final grade, and is designed for 55mph. that station of the pvi is 233 40, with an elevation of 1203 ft. the elevation of the curve at station 234 00 is 1202.102 ft

G1=+2%, Gz\s=-1%

Grade variance in absolute terms equals A = (G1 - G2) = (2 + 1) = 3%

V = 55 mph is the design speed.

V = 55 mph requires a stopping sight distance of SSD = 492.4 feet.

Assume SSD > Curve Length.

L=2SSD - 2158/A = 2x492.4 - 2158/3 = 265.47 ft Station of PVI = stapvi = 233 + 40 = 23340 ft

PVC Elevation = stave - stapvi - L/2 = 23340 - 265.47/2 = 23207.765 ft PVI Elevation = elevpri = 1203 ft

PVC's elevation is equal to elevpri- - GI(L/2) = 1203 - 0.02(265.47/2) = 1200.345 ft.

According to this theorem, if two tangents are traced to a circle from a single exterior point, their tangent segments must be equal. A tangent segment is a line that connects the external point and the tangency point.

Learn more about tangent here :

https://brainly.com/question/10053881

#SPJ4

Answer:

A

Explanation:

Answer:

A

Explanation:

The fuse breaks the circuit if a fault in an appliance causes too much current to flow. The fuse contains a piece of wire that melts easily. If the current going through the fuse is too great,the wire heats up until it melts and breaks the circuit

Answer:

oil seals function is To act as a physical barrier retaining the lubricating oil where it is bound to be.

Sealants function is to Fill a gap between two or more substrates .

Explanation:

The platform in a two-point scaffold should be no more than 14 inches wide.

This is in accordance with OSHA regulations, which require the platform width to be at least 14 inches but no more than 20 inches. The reason for this is to ensure that workers have enough space to work comfortably while also reducing the risk of tripping or falling. Additionally, the platform should be level and secured properly to prevent any movement or instability. It's important to note that the weight capacity of the platform should also be taken into consideration to avoid overloading it. In summary, the platform width of a two-point scaffold should be within the range of 14-20 inches and must be properly secured and leveled for safe use.

To know more about inches visit:

https://brainly.com/question/9264277

#SPJ11

The minimum size wire for branch circuits in residential buildings is 14 gauge wire while for institutional buildings it is 12 gauge wire.

The National Electrical Code (NEC) requires a minimum of 14-gauge wire for branch circuits in residential buildings. This wire size is sufficient to carry up to 15 amps of current, which is the maximum current for general-purpose circuits in homes. For larger appliances and equipment, such as air conditioners and electric water heaters, larger wire sizes may be necessary.

For institutional buildings, the minimum wire size for branch circuits depends on the specific application and the load requirements. The NEC provides guidelines for calculating the required wire size based on factors such as the load type, the length of the circuit, and the type of insulation. In general, larger institutional buildings may require thicker wire sizes than residential buildings to handle higher electrical loads.

You can learn more about branch circuits at

https://brainly.com/question/30312370

#SPJ11

Answer: C. Biotechnology system

Explanation:

Answer:

  121.6 volts

Explanation:

V = IR

V = (3.8 A)(32 Ω) = 121.6 volts

When the structure is sagging, additional vertical cable support the structure to make it more rigid.

The suspension bridge, the cable-stayed roof, and the bicycle-wheel roof are all examples of highly effective cable structures. Any string or cable stretched freely between two points will take the shape of a catenary, as evidenced by the beautiful arc of the enormous main cables of a suspension bridge.

Cable frameworks are a type of tensioned long-span construction that is supported by suspension cables. The suspension bridge, the cable-stayed roof, and the bicycle-wheel roof are all examples of highly effective cable structures.

Learn more about cable structures here:

https://brainly.com/question/28917025

#SPJ1

Answer:

I would say only A

Explanation:

steering dampeners are applied to heavy-duty and off-road vehicles in order to help stabilize and balance out your steering in rough terrain. luxury cars won't have them because, well, they are cars, and cars are not used for off-roading. trucks and SUVs and sometimes vans are though, which makes sense more than just a random luxury car with dampeners just sitting there for no reason at all when heavy-duty vehicles need them more than the car.

Answer:

Following are the solution to the given question:

Explanation:

The material is necessary to cook since frying is a speedy process for evaporation.

Drug A is now in the compressed fluid area, and the material would not boil if the pressure is chilled. Because the ship is solid, its substance A claim is false.

Unless the volume comprises of a drop in the heat, the B substance reaches a vapor pressure area and a wet region. That's the area that melting may occur. His claim for material B could therefore be true.

The oldest known fabricated shelter is located at Dolni-Vestonice. Dolni-Vestonice is an important Upper Paleolithic site situated in the Czech Republic. The site is in a valley of the Pavlov Hills in Moravia on the Dyje River floodplain. The site is well known for its numerous Palaeolithic archaeological discoveries, including ceramics, bone and stone artifacts, and other artifacts.

The site is notable for its permanent occupation by humans during the Upper Paleolithic era, as well as the development of Venus figurines, a significant element of Palaeolithic art. The site is important for researchers because it offers a comprehensive understanding of Palaeolithic Europe's climate and environmental conditions, as well as its inhabitants' customs and lifeways.

The earliest excavations at Dolní Věstonice were conducted in 1924 by Karel Absolon, a Czech archaeologist. Absolon discovered numerous artifacts, including a human bone, stone tools, ceramics, and figurines, that spanned from the Gravettian to Magdalenian periods, about 30,000 to 13,000 years ago.Furthermore, in 1988, a housing structure dating back to around 26,000 years ago was discovered at the Dolni-Vestonice site, making it the oldest known fabricated shelter to date. It was constructed with mammoth bones and had a circular floor plan.

To know more about oldest visit:

https://brainly.com/question/25044090

#SPJ11

Answer:

Updated question

The big ben clock tower in London has clocks on all four sides. If each clock has a minute hand that is 11.5 feet in length, how far does the tip of each hand travel in 52 minutes?

The distance traveled by the tip of the minute hand of the clock would be 62.59 ft

Explanation:

Let us assume the shape of the clock is circular.

the minute hand is equal to the radius = 11.5 ft

Diameter = radius x 2

Diameter = 11.5 x 2 = 23 ft

The distance traveled by the tip of the minute hand can be calculated thus;

the fraction of the circumference traveled by the minute hand would be;

52/60 = 0.8667

Circumference of the clock would be;

C = pi x d

where C is the circumference

pi is a constant

d is the diameter

C = 3.14 x 23

C = 72.22 ft

Therefore the fraction of the circumference covered by the minute hand would be;

72.22 ft x 0.8667 = 62.59 ft

Therefore the distance traveled by the tip of the minute hand of the clock would be 62.59 ft

The given statement "a sojtf can command multiple jsotfs and be a jtf at the same time" is TRUE.

A SOJTF (Special Operations Joint Task Force) can command multiple JSOTFs (Joint Special Operations Task Forces) and also be a JTF (Joint Task Force) at the same time. The SOJTF coordinates joint special operations as directed, synchronizing planning of current and future operations. SOJTFs are integrated into the geographic combatant command (GCC) staff and work closely with interagency and international partners, other GCCs, and subordinate commands.

Therefore, this statement "a sojtf can command multiple jsotfs and be a jtf at the same time" is true.

Learn more about SOJTF (Special Operations Joint Task Force) at https://brainly.com/question/4752458

#SPJ11

Answer:

Mach number = 0.68168

The flow should be treated as compressible.

Explanation:

Given that:

The altitude of a commercial jet = 35000

The properties of air at that given altitude are as follows:

Pressure = 24.577 kPa

Temperature T = 50.78176° C

Temperature T = ( 50.78176 + 273 )K = 328.78176 K

\(\varphi = 0.38428 \ kg/m^3\)

The velocity is also given as: 550 mph = 245.872 m/s

Therefore, the sonic velocity is firstly determined by using the formula:

\(a = \sqrt{ \vartheta \times R \times T\\)

\(a = \sqrt{1.4 \times 287 \times 323.78176\)

\(a = \sqrt{130095.5112\)

a = 360.68755 m/s

Then, we can calculate the Mach number by using the expression:

\({Mach \ number = \dfrac{V}{a}}\)

\(Mach \ number = \dfrac{245.872}{360.68755}\)

Mach number = 0.68168

b) Ideally, all flows are compressible because the Mach number is greater than 0.3, suppose the Mach number is lesser than 0.3, then it is incompressible.

Likely, CPVC. Most recommended.

The given statement "the va shear stress represents the maximum shear stress found anywhere in the structure" is false. The term "va" has no relevance to shear stress and therefore the statement cannot be true.

Let's further understand what shear stress is and how it is represented in a structure.Shear stress is the force that acts in parallel to a surface in opposite directions. It is also called tangential stress. Shear stress comes into play when two forces act parallel to each other but in opposite directions on an object. The formula to calculate shear stress is given as:T = F/AWhere T is shear stress, F is the applied force, and A is the cross-sectional area of the object.

The unit of shear stress is Pascal (Pa) in the SI system and psi (pound per square inch) in the Imperial system.However, the maximum shear stress found anywhere in the structure is represented by the symbol τ_max (tau-max). It is important to note that τ_max is not represented by the term "va" but by the symbol τ_max itself. Therefore, the given statement "the va shear stress represents the maximum shear stress found anywhere in the structure" is false.

To know more about statement visit:
https://brainly.com/question/17238106

#SPJ11

The thickness of aluminium needed to stop the beam electrons, protons and alpha particles at the given dfferent kinetic energies is 1.5 x 10⁻¹⁴ m.

The thickness of the aluminum can be determined using from distance of closest approach of the particle.

\(K.E = \frac{2KZe^2}{r}\)

where;

\(r = \frac{2KZe^2}{K.E} \\\\r = \frac{2 \times 9\times 10^9 \times 13\times (1.6\times 10^{-19})^2}{2.5 \times 10^6 \times 1.6 \times 10^{-19}} \\\\r = 1.5 \times 10^{-14} \ m\)

Since the magnitude of charge of electron and proton is the same, at equal kinetic energy, the thickness will be same. r = 1.5 x 10⁻¹⁴ m.

Charge of alpah particle = 2e

\(r = \frac{2KZe^2}{K.E} \\\\r = \frac{2 \times 9\times 10^9 \times 13\times (2 \times 1.6\times 10^{-19})^2}{10 \times 10^6 \times 1.6 \times 10^{-19}} \\\\r = 1.5 \times 10^{-14} \ m\)

Thus, the thickness of aluminium needed to stop the beam electrons, protons and alpha particles at the given dfferent kinetic energies is 1.5 x 10⁻¹⁴ m.

Learn more about closest distance of approach here: https://brainly.com/question/6426420

Answer:

  B) leads the voltage

Explanation:

One way to think about it is that the current causes charge to be accumulated on the capacitor, changing its voltage. The current must be non-zero before the voltage can change. Hence current leads voltage.

Answer:

Explanation:

It appears that you are trying to solve a problem involving an insulated rigid tank containing saturated liquid water and water vapor. To determine the volume of the tank, you will need to know the mass of the liquid water and the mass of the water vapor. The mass of the liquid water can be calculated by multiplying the mass of the water and vapor mixture by the fraction of the mixture that is liquid water (1.4 kg * 0.25 = 0.35 kg). The mass of the water vapor can be calculated by subtracting the mass of the liquid water from the total mass of the mixture (1.4 kg - 0.35 kg = 1.05 kg).

To determine the final temperature of the tank, you will need to know the amount of heat added to the tank by the electric resistor and the specific heat capacity of the water and water vapor mixture. The specific heat capacity is a measure of the amount of heat required to raise the temperature of a substance by a certain amount. The specific heat capacity of water is 4.186 J/g°C, and the specific heat capacity of water vapor is 2.080 J/g°C.

To determine the electric power rating of the resistor, you will need to know the amount of heat added to the tank by the resistor and the time over which the heat was added. The power rating of the resistor is equal to the amount of heat added to the tank divided by the time over which the heat was added.

I hope this helps clarify the problem and provide some guidance on how to solve it. If you have any further questions or need additional help, please don't hesitate to ask.

A mixed economy combines the traits of these two (2) economic systems: B. market and command.

A mixed economy can be defined as a type of economic system in which the government of a particular country is minimally involved in the allocation and production of goods and services, while effectively protecting the interest of the consumers and regulating the market by establishing laws.

This ultimately implies that, a mixed economy combines the traits of these two (2) economic systems market and command.

Read more on mixed economy here: https://brainly.com/question/13467040

#SPJ1

Answer:

No, the velocity profile does not change in the flow direction.

Explanation:

In a fluid flow in a circular pipe, the boundary layer thickness increases in the direction of flow, until it reaches the center of the pipe, and fill the whole pipe. If the density, and other properties of the fluid does not change either by heating or cooling of the pipe, then the velocity profile downstream becomes fully developed, and constant, and does not change in the direction of flow.

The correct answer is option D. Reassessment is performed to determine all of the following, EXCEPT the reason why the patient called EMS.

Reassessment is performed to determine all of the following, EXCEPT for the reason why the patient called EMS. The other three options are determined in a reassessment.

What is a reassessment?A reassessment is a physical examination and/or evaluation of a patient's condition in order to determine whether the patient's status has changed, if the patient has had any new signs or symptoms, and if the treatment that has been provided is effective or not. Reassessment is a key aspect of emergency medical services, and it is essential for ensuring that patients are provided with appropriate care.So, reassessment is performed to determine all of the following, EXCEPT the reason why the patient called EMS.

Learn more about Reassessment

https://brainly.com/question/33555916

#SPJ11

Answer:

Reduce manufacturing costs.

Explanation:

Hope This Helps

Have A Great Day

When processing a module, the computer leaps to it, runs its instructions, and then moves on to the next executable command.

The program jumps to the module, runs its instructions, and then moves on to the following executable instruction. The term "software development life cycle" (SDLC) refers to a strategic technique or process that outlines the essential processes or phases for designing and putting into practice high-quality software applications. One or more repetitive functions can be found in a module, which is a discrete software component or unit of a hardware program (tasks Through a programming interface, a module can be utilized in a variety of software programs or computer systems since it is portable. Additionally, they are interoperable since they typically work with different parts of a system or software application.

Learn more about Strategic technique here:

https://brainly.com/question/21852411

#SPJ4

Building Information Modelling (BIM) can support the delivery of construction projects in a more sustainable manner by enabling designers, engineers and builders to collaborate more effectively and make more informed decisions throughout the project lifecycle.

By creating a digital model of the building, BIM can help to identify and address potential sustainability issues, such as energy consumption and waste reduction, at an early stage. BIM also enables the integration of sustainable materials and technologies, which can help to reduce the environmental impact of the building. Additionally, BIM can support the efficient use of resources, such as water and energy, by providing accurate information about the building's performance. In conclusion, BIM can play a vital role in the delivery of construction projects in a more sustainable and environmentally responsible manner.

learn more about Building Information Modelling (BIM) here:

https://brainly.com/question/13351075

#SPJ11