Given the reaction at 101. 3 kilopascals and 298 K:hydrogen gas + iodine gas → hydrogen iodide gas

This reaction is classified as

(1) endothermic, because heat is absorbed

(2) endothermic, because heat is released

(3) exothermic, because heat is absorbed

(4) exothermic, because heat is released

Based on the given information, we can conclude that a chemical reaction took place when zinc metal was mixed with hydrochloric acid.

The evidence supporting this conclusion includes the production of a colorless, odorless, and flammable gas, as well as the dissolution of the zinc metal. The production of a colorless, odorless, and flammable gas indicates the occurrence of a chemical reaction. This gas is likely hydrogen (H2), which is commonly produced when metals react with acids.

The flammability of the gas suggests the formation of a highly combustible substance. Additionally, the dissolution of the zinc metal further supports the occurrence of a chemical reaction. When a metal dissolves in an acid, it typically undergoes a chemical reaction where the metal atoms lose electrons and form ions.

In this case, zinc would react with hydrochloric acid (HCl) to produce zinc chloride (ZnCl2) and hydrogen gas. Therefore, based on the evidence of gas production and zinc dissolution, we can conclude that a chemical reaction did indeed take place between zinc metal and hydrochloric acid.

To know more about chemical reaction click here: brainly.com/question/22817140

#SPJ11

Answer:

\((CH=CH_2)_2Cu Li\)

Explanation:

Gilman reagent is also known as the Lithium organocuprates. They are used as nucleophiles in the organic synthesis.

Gilman reagent is used for C - C bond formation.

                                                            H    H    H

                                                             |      |      |

             \($$CH_3CH_2CH_2Br\) -----→     H  - C -- C -- C -- C = \($CH_2$\)

           (1 bromo propane)                   |      |     |       |

                                                           H     H   H     H

                                                             (1 pentene)

Normally in C--C formation by Gilman reagent, the following reactions takes place :

R -- Br   +  \($(Br')_2Cu Li \rightarrow $\)  R--R' + R' Cu + Li Br

In 1 pentene, i.e.

\($CH_3CH_2CH_2 $\)     \($CH=CH_2$\)

(from 1 bromo    (from Gilman reagent)

      propane)

So Gilman reagent is \((CH=CH_2)_2Cu Li\)

Organo lithium compound is \($CH_2 = CHLi$\)

Answer:

A

Explanation:

just did the test

The electron cloud model is the modern model of the atom that contrasts the exact position of the electron.  It is the currently accepted atomic model. Thus, option A is correct.

The electron-cloud model is currently accepted and used model that states about the moving electron cloud around the nucleus in an atom. It contrasts with the previous models.

The electron cloud gives the probable position of the electron rather than a fixed position. It was given by Erwin Schrodinger that showed electrons no longer move in a fixed orbital around the atom.

The position of the electron is determined based on the cloud where they are most likely to be present. The field with high probability is represented as a dense area.

Therefore, option A. electron-cloud model is a modern atomic model.

Learn more about the electron-cloud model here:

https://brainly.com/question/12698387

#SPJ6

The formula of the salt is \(X_{4} Y_{8}\) given that  there are 8 ions in the unit cell.

The quantity of ions present in the unit cell can be used to identify the salt's chemical composition. There are 4 ions at the corners and 4 ions at the face centers of a face-centered cubic lattice. One ion can be found in a tetrahedral hole. As a result, the unit cell's total ion count is:

Ions at corners = 4, face centers = 4, and tetrahedral holes = 8, Hence the equation 4 + 2 + 2 = 8.

Learn more about salt:https://brainly.com/question/28382968

#SPJ4

The partial pressure of the third gas, helium will be \(P_h=0.22\ atm\)

According to Dolton's law of partial pressure if the mixture of gases exists in a container then the total pressure exerted by the gas will be the sum of the partial pressure of each case.

Now from the question, it is given

The total pressure of the three noble gases  \(P_t=1.25\ atm\)

The individual pressure of Neon= 0.68 atm

The individual pressure of  argon=0.35 atm

The partial pressure of the third gas will be:

\(P_t=P_A+P_N+P_H\)

\(P_H=P_T-P_A-P_N\)

\(P_H=1.25-0.68-0.35=0.22\ atm\)

Hence the partial pressure of the third gas, helium will be \(P_h=0.22\ atm\)

To know more about partial pressure follow

https://brainly.com/question/25924351

Answer:

a. .22

Explanation:

Answer:

Because something at absolute zero would have no kinetic energy, and atoms can never stop vibrating.

Explanation:

If something were to reach absolute zero, that means that the particles would reach a position were we are able to detect precisely their velocity and position in the atom.

This cannot be possible because it would violate Heisenberg's Uncertainty Principle, which in brief states that we can measure the velocity of electron but we would be uncertain about the position and vice versa. We cannot predict both velocity and position accurately.

Answer:

Its a

Explanation:

i took the quiz

The sentence that is inappropriate in an informational piece of writing with a formal tone is "People find Shakespeare's Pericles, Prince of Tyre boring and annoying because it's possible that he didn't even write the entire play." The correct option is A.

In academic or professional settings, a formal writing tone is common. This tone emphasizes thoroughness and directness while remaining respectful.

It emphasizes facts and grammatical correctness and uses full words rather than contractions.

The use of standard English, more complex sentence structures, the infrequent use of personal pronouns, and the absence of colloquial or slang terms characterize formal language.

In informal language, nonstandard English forms, colloquial vocabulary, and typically shorter sentence structures are permitted.

"People find Shakespeare's Pericles, Prince of Tyre boring and annoying because it's possible that he didn't even write the entire play," is an inappropriate sentence in a formal informational piece of writing.

Thus, the correct option is A.

For more details regarding formal tone, visit:

https://brainly.com/question/14330525

#SPJ2

The volume of Neon gas is 326.5 L in 8. 9 * 10 ^ 25 atoms as per the ideal gas law equation.

The given atoms of Neon gas =  8. 9 * 10 ^ 25

To calculate the volume of any gas we should use the ideal gas law equation.

PV = nRT

Here R is the universal gas constant.

To calculate the volume, we need to calculate the number of moles of neon gas. Avogadro's number is used to convert the number of atoms to moles:

1 mole of neon gas = 6.022 * 10^23 atoms of neon gas

The total number of moles of neon gas is:

8.9 * 10^25 atoms / 6.022 * 10^23 atoms/mol = 14.79 mol

Let's assume the temperature is 25°C  = 298 K

The pressure = 1 atm.

The value of R =  0.08206 Latm/(molK).

PV = nRT

V = (NRT) / P

V = (14.79 mol * 0.08206 Latm/(molK) * 298 K) / 1 atm

V = 326.5 L

Therefore we can conclude that the volume of Neon gas is 326.5 L.

To learn more about the Volume of Neon gas

https://brainly.com/question/7744281

#SPJ4

Suppose 5.0 mol of antimony (III) fluoride is added to 10.0 mol of carbon tetrachloride, and from the 100% reaction there are the equivalents of 0 moles of SbF₃, 5.0 moles of SbCl₃, 0 moles of CCl₄, and 15.0 moles of CClF₂.

A balanced reaction is one where the reactants and products are present in equal amounts, and if the 100% reaction takes place, then the reactant sides have 1 mol of SbF₃ and 3 mol of CCl₄ that make the product of 1 mol of SbCl₃ and 3 mol of CClF₂. After the 100% reaction, all the reactants get converted into the product. The complete reaction is the below.

SbF₃ + 3CCl₄ → SbCl₃ + 3CClF₂

Hence, suppose  5.0 mol of antimony (III) fluoride is added to 10.0 mol of carbon tetrachloride, and from the 100% reaction there are the equivalents of 0 moles of SbF₃, 5.0 moles of SbCl₃, 0 moles of CCl₄, and 15.0 moles of CClF₂.

Learn more about the balanced reaction here.

https://brainly.com/question/14280002

#SPJ2

Answer:

that means a train railroad track dude

do you mean -2(-x--3) - 4x-1=13 without the gig

Explanation:

Answer:

Pretend you are a TV producer. Think of ideas for new TV shows. Your objective is to create ideas that will be successful, regardless of whether this is quality programming or not. Think of an idea of a copy. Explain the basics of what this show will be like and what show it is copying. Explain why you feel this show will be popular. Think of an idea of a spin-off. Explain the basics of what this show will be like and what show it is spinning off from. Explain why you feel this show will be popular. Think of an idea for a TV show that falls into one of the genre categories listed in the genre chart. Describe the basics of the show and how it falls under the genre’s expectations for characters, plots, and aesthetics. Explain why you feel this show will be popular.

Answer:

No. Light is not a physical thing, so it cannot change physical things like glue.

Explanation:

Light is not effective at all to glue, it doesn't do anything at all.

Answer:

A radio telescope is simply a telescope that is designed to receive radio waves from space.

radio telescopes helps to study naturally occurring radio light from stars, galaxies, black holes, and other astronomical objects. We can also use them to transmit and reflect radio light off of planetary bodies in our solar system.

Answer: stronomers often scan the sky using devices called radio telescopes. What can you conclude about these devices? ... They pick up the radio waves emitted by stars.

The number of grams of water that are produced from the moles of H₂ is 108.09 grams .

From the balanced chemical equation, we see that 2 moles of H₂ reacts to produce 2 moles of H₂O. Therefore, 1 mole of H₂ reacts to produce 1 mole of H₂O.

To find the number of moles of water produced from 6.00 moles of H₂, we can use the stoichiometry of the balanced chemical equation:

6.00 moles H₂ x (2 moles H₂O / 2 moles H₂) = 6.00 moles H₂O

So 6.00 moles of H₂ produces 6.00 moles of H₂O. To convert moles of water to grams, we need to use the molar mass of water:

Molar mass of H₂O = 2(1.008 g/mol) + 1(15.999 g/mol) = 18.015 g/mol

So, the mass of 6.00 moles of H₂O is:

6.00 moles H₂O x 18.015 g/mol = 108.09 g

Find out more on grams produced at https://brainly.com/question/20703641

#SPJ1

pH of buffer solution after addition of HCl to HF/NaF buffer is 3.09.

What is the pH of a buffer solution consisting of HF and NaF after the addition of HCl?

To solve this problem, we need to determine how the addition of HCl will affect the pH of the buffer solution.

Step 1: Calculate the moles of HCl added.

moles HCl =

(100.0 mL) * (1.00 mol/L)

= 0.100 mol

Step 2: Determine which component of the buffer system will react with the added HCl.

HF + HCl → H2O + Cl- + F-

Since HF is a weak acid and HCl is a strong acid, most of the H+ ions will come from the HCl, leaving the F- ion to react with any excess H+ ions.

Step 3: Calculate the initial concentration of HF before the addition of HCl.

HF concentration = (0.250 mol/L) * (1.00 L) = 0.250 mol

Step 4: Calculate the amount of acid and conjugate base present in the solution after the addition of HCl.

HF: 0.250 mol - 0.100 mol = 0.150 mol

F-: (0.250 mol/L) * (0.100 L) = 0.025 mol

Step 5: Calculate the new concentration of HF and F- in the buffer.

HF concentration = (0.150 mol) / (1.00 L + 0.100 L) = 0.136 mol/L

F- concentration = (0.025 mol) / (1.00 L + 0.100 L) = 0.023 mol/L

Step 6: Calculate the new pH of the buffer using the Henderson-Hasselbalch equation.

pH = pKa + log([A-]/[HA])

pKa = -log(Ka) = -log(3.5 × 10^-4) = 3.46

pH = 3.46 + log(0.023/0.136)

pH = 3.09

Therefore, the pH of the buffer solution after the addition of 100.0 mL of 1.00 M HCl is 3.09. The correct answer is (E) 3.09.

To learn more about buffer solution, visit: https://brainly.com/question/8676275

#SPJ4

Answer: m=0.2699g

Explanation:

n=m/M   (n=moles, m=mass, M=molar mass)

nxM=m

0.01x26.99=m    (26.99=molar mass of aluminium (seen on periodic table))

m=0.2699g

Answer:

Explanation:

The momentum of an object can be found by using the formula

momentum = mass × velocity

From the question we have

momentum = 0.00001346 * 790204000

= 10636.14584

We have the final answer as

Hope this helps you

i think it would be neutral

Number of moles of carbon monoxide gas that were collected is 0.585 mol and the mass of carbon monoxide gas is 25.7 g

In an evacuated flask with a measured volume of 30.0L, carbon dioxide gas is collected at a temperature of 27.0 °C. The pressure within the flask is 0.480atm once all the gas has been collected.

Determine the volume and moles of the carbon dioxide gas that was gathered. Make sure you have the right number of significant digits in your response.

T = 27.0°C ˖ 273.15 = 300.2 K

V = 30.0 L

P = 0.480 atm

n = ?

m = ?

Determine the number of moles of CO₂

The ideal gas equation can be used to determine the moles of CO₂.

P×V = n×R×T

n= (P×V)/(R×T) = (0.480×30.0)/(0.08206×300.2) = 0.585 mol

Calculate the CO₂ mass.

The molar mass is calculated to be 44.01 g/mol.

0.585 × 44.01 = 25.7 g

To know more about gas visit:

https://brainly.com/question/3637358

#SPJ4

No, they were given wrong the actual mass of both is 250.27 grams

The mass of object A is 50.3 grams

The mass of an object B is 200.54 grams

The combined mass of objects A and B is 251 grams

We, know that combined means the total weight of objects A and B

\($$\begin{aligned}&\Rightarrow A+B \\&\Rightarrow 50.3+200.24 \\&\Rightarrow 250.27 g \\&\Rightarrow 250.27 g \neq 251 g\end{aligned}$$\)

No, the report they were given was wrong because their total weight is \($250.27 \mathrm{~g}$\) but they gave 251 grams.

The fundamental physical attribute of matter is mass. The atomic mass refers to the mass of an atom or molecule. To calculate the average mass of elements and molecules and to solve stoichiometry issues, the atomic mass is utilised.

The mass of an atom is defined as its atomic mass. Although the kilogramme is the SI unit of mass, atomic mass is frequently stated in the non-SI unit dalton - equivalently, unified atomic mass unit. 1 Da is defined as 1/12 the mass of a free carbon-12 atom in its ground state at rest.

Learn more about atomic mass https://brainly.com/question/17067547

#SPJ9

Answer:  120 Teaspoons

Explanation:  

TS = Teaspoons; R = Recipe ; S=Servings

(2 TS/R)/(10S/R) = (10S/2TS)

(600S)/(10S/2TS) = 120 TS

Answer:

0.20 mol

Explanation:

Let's consider the reduction of iron from an aqueous solution of iron (II).

Fe²⁺ + 2 e⁻ ⇒ Fe

The molar mass of Fe is 55.85 g/mol. The moles corresponding to 5.6 g of Fe are:

5.6 g × 1 mol/55.85 g = 0.10 mol

2 moles of electrons are required to deposit 1 mole of Fe. The moles of electrons required to deposit 0.10 moles of Fe are

0.10 mol Fe × 2 mol e⁻/1 mol Fe = 0.20 mol e⁻

0.20 mol of electrons is required to deposit 5.6g of iron from a solution of iron (2) tetraoxosulphate(6)

 The reduction of iron from an aqueous solution of iron (II).

\(Fe^{+2} +2e^{-} \rightarrow Fe\)

The formula for number of moles is as follows:-

\(Number \ of \ moles=\frac{Mass}{Molar\ mass}\)

The molar mass of Fe is 55.85 g/mol. The moles corresponding to 5.6 g of Fe are:

\(5.6 g \times\frac{1\ mol}{55.85\ g} = 0.10 \ mol\)

2 moles of electrons are required to deposit 1 mole of Fe. The moles of electrons required to deposit 0.10 moles of Fe are:-

\(0.10 mol Fe\times\frac{2\ mol\ e^{-} }{1\ mol\ e^{-}} = 0.20 \ mol e^{-}\)

Hence, 0.20 mol of electrons is required to deposit 5.6g of iron.

To know more about:-

brainly.com/question/12513822

Bromobenzene is generally unreactive in both SN1 and SN2 reactions due to the strong bond between the carbon and the benzene ring. This bond makes it difficult for the nucleophile to approach the carbon and participate in a substitution reaction.

In SN1 reactions, the leaving group departs first to form a carbocation intermediate, which is then attacked by the nucleophile. In SN2 reactions, the nucleophile attacks the substrate at the same time as the leaving group departs.

However, bromobenzene has a benzene ring attached to the carbon, which has a strong bond that makes it difficult for the nucleophile to approach and participate in a substitution reaction.

The benzene ring is electron-rich and creates a cloud of electrons around the carbon, making it less accessible to incoming nucleophiles.

Additionally, the carbon atom is sp2 hybridized, which means that the orbital that would typically participate in nucleophilic substitution is occupied by the electrons in the benzene ring.

These factors make it challenging for bromobenzene to undergo SN1 and SN2 reactions, which typically require a more reactive substrate with less steric hindrance.

Visit here to learn more about electrons:

brainly.com/question/860094

#SPJ11

Pb + 2H₂O → PbO₂ + 2H₂

Here the products are Solid metal oxide: PbO₂ and Hydrogen: H

and the reactants: Metal: Pb and Steam: H₂O

We know,

Reactants → Products

Pb + H₂O → PbO₂ + H

After balancing the equations, we get,

Pb + 2H₂O → PbO₂ + 2H₂

To know more balancing the equations click here

brainly.com/question/27696100

#SPJ4

Answer:

21.25

Explanation:

Answer:

The answer to this is A. One kind of atom

Explanation:

The other options make no sense whatsoever. But enjoy.

I hope this helped.

Answer:

A. One kind of atom

Explanation:

In a chain reaction, the nucleus of an atom splits into two smaller nuclei, releasing energy. In order for this reaction to occur, the conditions must be just right. One of the most important factors is that the nuclei must be close together, so that they can collide and undergo the reaction.

In a large piece of uranium, the nuclei are packed together more tightly than in a small piece, because there is more of them. This means that there are more opportunities for the nuclei to collide and undergo a chain reaction. As a result, a chain reaction is more likely to occur in a large piece of uranium than in a small piece.

It's worth noting that a chain reaction can also be controlled and sustained in a nuclear reactor, where the fuel is arranged in a controlled manner and the reaction is kept under control by various safety systems.  

Learn more about chain reaction visit: brainly.com/question/1345334

#SPJ4

Answer:

The balloon quickly becomes inflated because it is filled with CO2 gas

Explanation:

Once the vinegar and baking soda are mixed, a chemical reaction occurs as follows;

NaHCO3​+CH3​COOH→CH3​COONa+H2​O+CO2​.

Once this reaction occurs, the balloon becomes inflated because it is now filled with CO2 gas.

If the filled balloon is punctured at any point, CO2 gas escapes from it.

Answer:

q

Explanation:

Answer:

By element with the lowest atomic number to the highest atomic number.

Explanation: