Given the following code:public int addNumbers(int one, int two)Which method will correctly override this method when placed in a subclass?I. public int addNumbers(int one, int two, int three)II. public int addNumbers(int one, int two)III. public int addNumbers(int a, int b)IV. public int addNumbers()a. I and IV onlyb. II and III onlyc. III onlyd. II only

Biomass energy is available in many areas and has no net increase in carbon dioxide emissions if forests are replanted.

Biomass refers to organic matter, such as wood, crop residues, and agricultural waste, that can be used as a renewable energy source. When biomass is burned or converted into biofuels, it releases carbon dioxide, but the emissions are considered carbon-neutral because the plants absorb an equivalent amount of carbon dioxide during their growth. By replanting forests or cultivating energy crops, the carbon dioxide emitted from biomass energy production can be offset, resulting in a net-zero carbon footprint. This makes biomass energy an environmentally friendly option for reducing greenhouse gas emissions and promoting sustainable energy sources.

Know more about Biomass energy here;

https://brainly.com/question/30067229

#SPJ11

Goals are main pillers of achivement and are the effective performance management process.

Training program should offer a variety of innovative programs. Programs should enhance knowledge, develop necessary skills, and enrich both the individual and the organization. Organizations must create a culture of learning.

Making departmental goals accessible to all managers ensures there is no overlap, reduces conflict, and allows members of different departments to see where they support each other and ensure they are not working at cross purposes.

          S – Specific

          M – Measurable

        A – Achievable/Attainable

        R – Results-Oriented/Realistic/Relevant

        T – Time-Bound

Use Peer Reviews.

Offer Frequent Performance Feedback.

Utilize Performance Management Software.

Define and Communicate Company Goals and Performance      Objectives.

Set Regular Meetings to Discuss Outcomes and Results.

Performance appraisal has three basic functions

(1) to provide adequate feedback to each individual on his or her performance.

(2) to serve as a basis for modifying or changing behavior toward more effective working habits.

(3) to provide data to managers with which they may judge future job assignments and compensation. The performance appraisal concept is central to effective management. Much hard and imaginative work has gone into developing and refining it. In fact, there is a great deal of evidence to indicate how useful and effective performance appraisal is. Yet present systems of performance appraisal do not serve any of these functions well.

4 steps to add an action plan

   Department: Choose the department you wish to create an Action Plan for from the list provided. This list includes all the departments you have been assigned access. You will want to create a separate action plan for each department.

   Category: Type the name of the category needing improvement. This category can be found on your standard survey report and is listed as an “Attitude Area.” For example, “Immediate Supervision” is an attitude area.

   Opportunity for Improvement: Select the description of the survey item you will be working to improve. Each survey item you are working on should have a separate action plan. For example, “My Supervisor Has Effective Communications” is a survey statement.

To know more about  performance management visit:

https://brainly.com/question/29833837

#SPJ4

Effective performance management relies on goals, which are the primary predictors of success.

Innovative programs should be offered by training programs. Knowledge should be expanded, skills should be developed, and both the individual and the organization should benefit from the programs. A learning culture must be established by organizations.

By making departmental goals accessible to all managers, overlap is avoided, conflicts are reduced, and members of different departments can see where they complement one another and ensure that they are not working against each other.

S stands for specific, M for measurable, A for attainable, Achievable, and Relevant, R for results-oriented, realistic, and relevant, and T for time-bound use and peer reviews.

Provide regular feedback on performance.

Make use of software for performance management.

Establish and Communicate Performance Objectives and Company Goals.

Establish regular meetings to discuss results and outcomes.

The first and most fundamental function of performance evaluation is to provide each employee with sufficient feedback on their performance.

(2) to provide a foundation for altering one's behavior in the direction of more efficient work practices.

(3) to provide managers with data they can use to evaluate future job assignments and pay. The idea of performance reviews is essential to efficient management. It has been developed and refined through a great deal of creative and laborious effort. In fact, there is a lot of evidence that performance evaluation is useful and effective. However, the current performance evaluation systems do not adequately fulfill any of these requirements.

To know more about performance management :

brainly.com/question/29833837

#SPJ4

Answer:

Hey there!

Explanation:

This is your answer....

The standard of something as measured against other things of a similar kind; the degree of excellence of something.

OR

Quality engineering is the discipline of engineering concerned with the principles and practice of product and service quality assurance and control. In software development, it is the management, development, operation and maintenance of IT systems and enterprise architectures with a high quality standard.

Hope it helps!

Brainliest pls!

Have a good day!^^

Answer:

Reduce manufacturing costs.

Explanation:

Hope This Helps

Have A Great Day

The address on a PC that does not change, even if the PC is moved to a different network, is the MAC (Media Access Control) address. The MAC address is a unique identifier assigned to network interfaces for  on a physical network.

The Media Access Control (MAC) address of a network interface card (NIC) on a PC does not change, even if the PC is moved to a different network. The MAC address is a unique identifier assigned to the NIC by the manufacturer and is used to identify devices on a local network. It is different from an IP address, which can change if the PC is moved to a different network with a different subnet or if the network configuration is changed.

Learn more about network here

https://brainly.in/question/13044019

#SPJ11

The value of the alternating component of shear stress is kpsi. The value of the mean component is not provided in the question.

The question only provides the value of the alternating component of shear stress, which is measured in kpsi (kilopounds per square inch). The mean component of shear stress is not provided, so its value cannot be determined from the given information.

The alternating component of the shear stress refers to the oscillating part of the stress that changes in magnitude and direction. The mean component, on the other hand, is the average value of the stress throughout the cycle. These values are essential in understanding material behavior and fatigue life under cyclic loading conditions. They are typically measured in units of stress, such as kilopounds per square inch (kpsi) in the Imperial system.

To know more about shear stress visit:

https://brainly.com/question/30328948

#SPJ11

Complete Question

The cars of a roller-coaster ride have a speed of 19.0 km/h as they pass over the top of the circular track. Neglect any friction and calculate their speed v when they reach the horizontal bottom position. At the top position, the radius of the circular path of their mass centers is 21 m, and all six cars have the same mass.V = -18 m What is v?X km/h

Answer:

\(v=23.6m/s\)

Explanation:

Velocity \(v_c=18.0km/h\)

Radius \(r=21m\)

initial velocity u\(u=19=>5.27778\)

Generally the equation for Angle is mathematically given by

\(\theta=\frac{v_c}{2r}\)

\(\theta=\frac{18}{2*21}\)

\(\theta=0.45\)

\(\theta=25.7831 \textdegree\)

Generally

Height of mass

\(h=\frac{rsin\theta}{\theta}\)

\(h=\frac{21sin25.78}{0.45}\)

\(h=20.3m\)

Generally the equation for Work Energy is mathematically given by

\(0.5mv_0^2+mgh=0.5mv^2\)

Therefore

\(v=\sqrt{u^2+2gh}\)

\(v=\sqrt{=5.27778^2+2*9.81*20.3}\)

\(v=23.6m/s\)

Answer:

C. WordArt

Explanation:

WordArt feature of MS word is used for styling the text n order to make it look neater or more noticeable. These features are found in the top home menu. They feature text size, text style, text color, and options to make text bold, italic, underlined, etc. There are also many features to make text flashy, colorful, and add special effects. It can be shaded, neon, have shadows, etc.

The Cartesian and polar notation based on the information is solved below.

Cartesian notation:

P₁ - P₂ = (6cos(445°) - 2cos(460°))i + (6sin(445°) - 2sin(460°))j

≈ 3.43i - 2.91j

P₂ - P₁ = (-3.43)i + (2.91)j

Polar notation:

R1 = sqrt((6^2 + 2^2) - (262cos(460°-445°))))

≈ 3.91"

θ1 = atan2(6sin(445°) - 2sin(460°), 6cos(445°) - 2*cos(460°))

≈ -20.94°

R2 = sqrt((6^2 + 2^2) - (262cos(445°-460°))))

≈ 3.91"

θ2 = atan2(2sin(460°) - 6sin(445°), 2cos(460°) - 6*cos(445°))

≈ 159.06°

b) Cartesian notation:

P₁ - P₂ = (10cos(120°) - 4cos(40°))i + (10sin(120°) - 4sin(40°))j

≈ -5.74i + 8.66j

P₂ - P₁ = (5.74)i - (8.66)j

Polar notation:

R1 = sqrt((10^2 + 4^2) - (2104cos(40°-120°))))

≈ 11.18 cm

θ1 = atan2(10sin(120°) - 4sin(40°), 10cos(120°) - 4*cos(40°))

≈ 123.69°

R2 = sqrt((10^2 + 4^2) - (2104cos(120°-40°))))

≈ 11.18 cm

θ2 = atan2(4sin(40°) - 10sin(120°), 4cos(40°) - 10*cos(120°))

≈ -56.31°

c) Cartesian notation:

P₁ - P₂ = (4cos(4225°) - 3cos(45°))i + (4sin(4225°) - 3sin(45°))j

≈ -2.58i - 0.17j

P₂ - P₁ = (2.58)i + (0.17)j

Polar notation:

R1 = ✓(4^2 + 3^2) - (243cos(45°-4225°))))

≈ 4.14'

θ1 = atan2(4sin(4225°) - 3sin(45°), 4cos(4225°) - 3*cos(45°))

≈ -44

Learn more about Cartesian on

https://brainly.com/question/4726772

#SPJ1

The area of the triangle when the base is 10 cm and the height is 7 cm is 35 cm.

To calculate the area of a triangle, the base, and height of the triangle are multiplied by 1/2.

Decide which side will serve as the triangle's base, then calculate the triangle's height from that base. After that, enter the height and base measurements you have into the formula.

A = kbh

36 = k (8)(9)

36 = k 72

36/72 = k 72/72

½ = k

A = (½)(10)(7)

A = (½)(70)

A = 35

Therefore, the area of the triangle is 35.

To learn more about area of the triangle, refer to the link:

https://brainly.com/question/21327457

#SPJ1

By using an ideal op-amp configured as a unity gain buffer, the loading effect between cascaded low-pass and high-pass filters can be eliminated. This configuration allows for the independent operation of each filter and prevents interference.

The resulting transfer function of the combined circuit depends on the individual transfer functions of the low-pass and high-pass filters.

When cascading filters, the loading effect can occur, which causes the output impedance of one filter to affect the input impedance of the following filter, leading to unexpected behavior. By inserting an ideal op-amp configured as a unity gain buffer between the filters, the loading effect can be eliminated. The buffer isolates the output impedance of the first filter from the input impedance of the second filter, allowing them to operate independently.

The resulting transfer function of the combined circuit depends on the transfer functions of the low-pass and high-pass filters used. Each filter has its own transfer function that defines its frequency response. When cascaded, the transfer functions multiply together to determine the overall response of the combined circuit.

To draw the magnitude and phase transfer functions, one would need to know the specific transfer functions of the low-pass and high-pass filters being used. The resulting transfer function of the combined circuit can be obtained by multiplying the transfer functions of the individual filters. Based on the characteristics of the filters used, the combined circuit can exhibit characteristics of a band-pass filter, allowing only a specific range of frequencies to pass through while attenuating others.

Learn more about   gain buffer here :

https://brainly.com/question/31156212

#SPJ11

Answer:

steel beams are more stable for building.

Explanation:

Because they are much stronger then wood

Answer:

a) 4.74 * 10^-23 cm^3

b)  8.9 g/cm^3

Explanation:

Given data :

Lattice parameter of copper = 0.362 nM

Atomic weight of copper = 63.54 g/mole

Given that copper forms a fcc structure

a) Calculate the volume of the unit cell

V = a^3

  = ( 0.362 * 10^-7  cm )^3 = 4.74 * 10^-23 cm^3

b) Calculate density of copper in g/cm^3

Density = ( n*A ) / ( Vc * NA) ----------- ( 1 )

where: NA = Avogadro's number = 6.022 * 10^23  atoms/mol

n = number of atoms per unit cell = 4

A = atomic weight = 63.54 g/mol

Vc = volume of unit cell =  4.74 * 10^-23 cm^3

Input values into equation 1

Density = 8.9 g/cm^3

Answer:

Hope this will help you

Have a good day

Answer:

\(Length = 9558.7\ mils\)

Explanation:

Given

\(diameter = 82.2\ mils\)

\(Strands = 37\)

Required

The length of the wire

First, we calculate the circumference (C) of 1 strand of the wire

\(C = \pi d\)

\(C = \frac{22}{7} * 82.2\)

\(C = \frac{22* 82.2}{7}\)

\(C = \frac{1808.4}{7}\)

The length of the 37 strands is:

\(Length = 37 * C\)

\(Length = 37 * \frac{1808.4}{7}\)

\(Length = \frac{37 * 1808.4}{7}\)

\(Length = \frac{66910.8}{7}\)

\(Length = 9558.68571429\)

\(Length = 9558.7\ mils\) --- approximated

Answer:

  5

Explanation:

The sum of the digits of the number is ...

  (4+1+3)+(4+6+5)+(7+8+9) = 8+15+24 = 47

The sum of those digits is 4+7=11, and those digits sum to 1+1 = 2.

That is, the value of the number mod 9 (or 3) is 2.

The ones digit is odd, so the value of the number mod 2 is 1.

This combination of modulo values tells you the mod 6 result is 5.

_____

Additional comment

We can look at the (mod2, mod3) values of the numbers 0 to 5:

  0 ⇒ (0, 0)

  1 ⇒ (1, 1)

  2 ⇒ (0, 2)

  3 ⇒ (1, 0)

  4 ⇒ (0, 1)

  5 ⇒ (1, 2) . . . . the mod {2, 3} results we have for the number of interest.

This process of adding up the digits repeatedly is referred to as "casting out 9s." The result of it is the modulo 9 value of the number (with 0 mapped to 9). Checking the mod 9 result of arithmetic operations is one quick way to spot certain kinds of errors. It can also be used as part of a divisibility test for 3 or 9.

Answer:

Cool.

Explanation:

To determine the rate of heat transfer to the river water, we need to first find the amount of heat being generated by the steam power plant.

Step 1: Calculate the total heat generated by the power plant:
Total heat generated = Power output / Thermal efficiency
Total heat generated = 600 MW / 0.46
Total heat generated ≈ 1304.35 MW

Step 2: Calculate the amount of heat transfer to the river water:
Since the power plant has a thermal efficiency of 46%, it means that 54% of the total heat generated is not converted into useful work and is transferred to the river water.

Heat transfer rate to the river = Total heat generated * (1 - Thermal efficiency)
Heat transfer rate to the river = 1304.35 MW * (1 - 0.46)
Heat transfer rate to the river ≈ 704.35 MW

So, the rate of heat transfer to the river water is approximately 704.35 MW. The actual heat transfer rate may vary depending on various factors such as the efficiency of the cooling system, ambient temperature, and river water properties. However, this value provides a good estimation of the heat transfer rate.

To learn more about Thermal efficiency -brainly.com/question/13039990

#SPJ11

Answer:

Q = [ mCp ( ΔT) ] \(_{cooling water }\)

(ΔT)\(_{cooling water}\) and  Q  is given

\(m_{cooling water}\)  = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)

next the rate of condensation of the steam

Q = [ m\(h_{fg}\) ]\(_{steam}\)

  \(m_{steam} = \frac{Q}{h_{fg} }\)

Total resistance of the condenser is

R = \(\frac{Q}{change in T_{cooling water } }\)

Explanation:

How will the rate of condensation of the steam and the mass flow rate of the cooling water can be determined

Q = [ mCp ( ΔT) ] \(_{cooling water }\)

(ΔT)\(_{cooling water}\) and  Q  is given

\(m_{cooling water}\)  = \(\frac{Q}{Cp[ T_{out} - T_{in} ] }\)

next the rate of condensation of the steam

Q = [ m\(h_{fg}\) ]\(_{steam}\)

  \(m_{steam} = \frac{Q}{h_{fg} }\)

Total resistance of the condenser is

R = \(\frac{Q}{change in T_{cooling water } }\)

Electric

Answer

Explain

Home safety and security is an electric process as there are some devices that have electric involvement.

The systems in house safety are which consist of sensors and regular cameras or sirens, are armed via way of means of inputting a code at the keypad, the usage of a voice command, urgent a key fob, or doing it via an app.

Electronic protection gadget refers to any digital device that might carry out protection operations like surveillance, get right of entry to manage, alarming or an intrusion manage to a facility or a place which makes use of energy from mains and additionally an energy backup like a batter.

Read more about the Home safety :

https://brainly.com/question/14367881

#SPJ2

Based on the compensation principle, the dam should be built because the total willingness to pay ($13,500) exceeds the cost of the dam ($6,000), making individuals better off. Therefore, Statement 5 and Statement 6 are both false.

If Jill's willingness to pay for the dam is $4,000, and the compensation principle is used to decide, then the dam should be built because the aggregate benefit from the dam is greater than its aggregate cost. The total willingness to pay for the dam ($7,500 + $2,000 + $4,000 = $13,500) exceeds the cost of the dam ($6,000).Therefore, the dam should be built. This recommendation comes from the compensation principle because some of these individuals end up better off. Harry, who initially did not want the pond, will get a compensation of $5,000 if the dam is built. Tom, Jill, and Jack will have the pond, which they value at $7,500 + $4,000 + $2,000 = $13,500, so they will pay the cost of the dam. If the dam is built, according to the compensation principle, all individuals who will be better off or worse off due to the construction of the dam should be compensated for their losses. Therefore, Statement 5 is FALSE. The cost of building the dam should be paid for by all the individuals who will benefit from the pond. Hence, Statement 6 is FALSE.

Learn more about dam here :-

https://brainly.com/question/29483452

#SPJ11

c. adaptive. When routing tables adapt to network changes, the routing system is called adaptive. Adaptive routing refers to a routing algorithm that can dynamically adjust the path that data takes through a network based on current network conditions.

This enables the network to continue to function efficiently even in the face of changes such as link failures or congestion.

Adaptive routing is in contrast to static routing, where the path that data takes through the network is pre-determined and does not change based on network conditions. Static routing can be less efficient and less resilient than adaptive routing, particularly in large or complex networks.

Adaptive routing algorithms typically use a range of metrics to determine the optimal path for data through the network. These metrics might include factors such as the number of hops between nodes, the bandwidth available on different links, or the latency of different routes.

By adapting to changes in network conditions, adaptive routing can help to ensure that data reaches its destination quickly and reliably, even in the face of changing circumstances. This can be especially important in large or critical networks, such as those used in data centers or telecommunications infrastructure.

Learn more about network here:-

https://brainly.com/question/31228211

#SPJ11

Answer:

a

Explanation:

Answer:

The best chose will happen to be C

Removing a wet pack from the autoclave results in contamination and compromised sterility.

When a wet pack is removed from the autoclave, it can lead to contamination and compromised sterility. Autoclaves are used to sterilize instruments, equipment, and medical supplies by subjecting them to high-pressure steam at elevated temperatures. The moisture within the autoclave helps facilitate the sterilization process. If a pack is removed while still wet, it is more susceptible to contamination from the surrounding environment.

Moisture can create an ideal breeding ground for microorganisms, including bacteria and fungi, which can compromise the sterility of the items inside the pack. It is crucial to allow wet packs to thoroughly dry before removing them from the autoclave to ensure the effectiveness of the sterilization process. Strict adherence to proper autoclave protocols, including drying times and handling procedures, is essential to maintain the sterility of medical instruments and supplies.

To learn more about equipment click here

brainly.com/question/17858199

#SPJ11

Some synthetic cutting fluids contain chemicals that can irritate the skin when in prolonged contact. These chemicals are designed to improve the performance of the cutting fluid by reducing friction and heat during the cutting process. However, they can also cause skin irritation, especially if the skin is sensitive or if the cutting fluid is not properly diluted. It is important to take proper safety precautions when working with synthetic cutting fluids, including wearing protective clothing and gloves, and washing skin thoroughly after exposure.

To know more about synthetic cutting

https://brainly.com/question/4729756?

#SPJ11

Answer:

B.

Explanation:

I think not sure hehe

Answer:

Explanation:

The most common HFC used in air conditioners is R-410A. This refrigerant is better than R-22 in terms of “Ozone Depletion” potential and energy efficiency, but it still causes global warming. A few more HFCs that are commonly used are: R-32 in Air Conditioners and R-134A in refrigerators.

Answer:

The most common refrigerants used for air conditioning over the years include

Explanation:

The most common refrigerants used for air conditioning over the years include.