Calculating the molar masses of LiOH and H2O and using stoichiometry to convert between the two compounds will allow us to compute the mass of H2O that is created.
LiOH has a molar mass of 6.94 g/mol.
O = 16.00 g/mol
H = 1.01 g/mol
LiOH's molecular weight is 6.94 plus 1.01 plus 16.00 g/mol, or 23.95 g/mol.
The balanced equation states that 2 moles of LiOH result in 1 mole of H2O. As a result, we must first determine the mass of LiOH, then convert it to moles of H2O, and then determine the mass of H2O.
1.402 moles of LiOH are equal to 33.61 grammes of LiOH divided by 23.95 grammes per mole.
LiOH and H2O have a 2:1 molar ratio, hence the amount of moles of H2O.
Learn more about LiOH at :
https://brainly.com/question/29476514
#SPJ1
A 2.50 mol sample of gas occupies 3.0L of volume. If the container is elastic and the amount of the gas increased
to 3.60 mol what will be the volume of the new system?
The volume of the new system will be 4.32 L.
Given that a 2.50 mol sample of gas occupies 3.0 L of volume. If the container is elastic and the amount of the gas increased to 3.60 mol.
We have to calculate the volume of the new system.
Therefore, we use Avogadro's Law, which states that equal volumes of gases at the same temperature and pressure contain an equal number of molecules.
According to Avogadro's Law,V1/n1= V2/n2Where,V1 is the initial volume of the gas.n1 is the initial number of moles of the gas.V2 is the final volume of the gas.n2 is the final number of moles of the gas.
Now, let's calculate the new volume of the system using Avogadro's Law.
V1/n1= V2/n2
Given that V1 = 3.0 L,
n1 = 2.5 mol,
n2 = 3.6 mol
Therefore, V2 = (V1*n2)/n1V2
= (3.0 * 3.6) / 2.5V2
= 4.32 L
Therefore, the volume of the new system will be 4.32 L.
To learn more about volume visit;
https://brainly.com/question/28058531
#SPJ11
PLEASE HELP ME ASAPPPPPPPP!!!!!!!!! PLEASEEEEEEEEEEEEEEEEEEE
Calculate the number of grams in 50 molecules of methane (CH4). Use as molar masses
for H= 1.008 g/mol, and for C= 12.011 g/mol.
Answer:
3.1167
Explanation:
Find the molar mass of CH4 and divide the 50 grams by the molar mass
A block of lead displaces a volume of 27.9 mL. What is the mass of this block if the density of the lead is 11.34 g/mL?
Answer:
The answer is 316.39 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume of lead = 27.9 mL
density = 11.34 g/mL
We have
mass = 11.34 × 27.9 = 316.386
We have the final answer as
316.39 gHope this helps you
One litre of hydrogen at STP weight 0.09gm of 2 litre of gas at STP weight 2.880gm. Calculate the vapour density and molecular weight of gas.
Answer:
we know, at STP ( standard temperature and pressure).
we know, volume of 1 mole of gas = 22.4L
weight of 1 Litre of hydrogen gas = 0.09g
so, weight of 22.4 litres of hydrogen gas = 22.4 × 0.09 = 2.016g ≈ 2g = molecular weight of hydrogen gas.
similarly,
weight of 2L of a gas = 2.88gm
so, weight of 22.4 L of the gas = 2.88 × 22.4/2 = 2.88 × 11.2 = 32.256g
hence, molecular weight of the gas = 32.256g
vapor density = molecular weight/2
= 32.256/2 = 16.128g
hence, vapor density of the gas is 16.128g.
Explanation:
What can lead to being curious and also lead to fascinating scientific investigations? a. Questions b. Answers c. Qualitative Measurements d. Quantitative Measurements
Answer:
Questions
Explanation:
The word "science" was obtained from the Latin word "Scire" which means "to know". Hence science is a systematic investigation into the nature of the universe.
Scientific investigations begin with asking questions about the universe. It is this curiosity to know about occurrences in the universe as well as how to solve problems in the universe that leads to fascinating scientific investigations and discoveries.
what is the volume of a 5.0 gram sample of seawater with a density of 1.025 g/mL?
Answer:
since you have both the mass and density of the sample, the volume can be derived from both
volume of seawater = \(\frac{5.0}{1.025}\)
= 4.88 ml (3 s.f.)
Hydraulic fracturing, or fracking, is the pumping of highly pressurized water with a mixture of sand and chemicals into boreholes to.
Hydraulic fracturing, or fracking, is the pumping of highly pressurized water with a mixture of sand and chemicals into boreholes to create cracks within rocks.
Hydraulic fracturingHydraulic fracturing (fracking, hydro fracking, and hydro fracturing) involves the fracturing of rock formations through the use of pressurized liquid.
Hydraulic fracturing is the pumping of highly pressurized water with a mixture of sand and chemicals into boreholes to create cracks within rocks .This provides a pathway for natural gas to escape out.
Find out more on Hydraulic fracturing at: https://brainly.com/question/1990340
I need help please!!!!!!!!!!
The number of moles is 257143 moles
How many liters are in one mole?The volume of one mole of a gas at a given temperature and pressure depends on the specific gas and the conditions.
However, under standard conditions of temperature and pressure (STP), one mole of any ideal gas occupies a volume of 22.4 liters.
This value is known as the molar volume of an ideal gas at STP and is a useful conversion factor in many chemistry problems involving gases.
We know that;
1 mole = 22.4 L
x moles = 5.76 * 10^6 L
x = 257143 moles
Learn more about moles:https://brainly.com/question/26416088
#SPJ1
19)
Why were collisions much more likely early in time (closer to the birth of the universe) than present day?
A)
galaxies were closer together
B)
galaxies were bigger in earlier times
C)
there were only spiral galaxies which tend to collide more often
D)
early galaxies had no more protogalactic clouds which formed more stars
to collide
Answer:
The answer is A.
Explanation:
Universe was smaller and galaxies were closer together in past, galaxy collisions were common in past (distorted galaxies were common in early universe).
Calculate the Theoretical Yield of your product, i.e. the mass you would expect to recover, assuming 100% conversion to product.(explain it too)
The Theoretical Yield of the reaction is 2g.
The theoretical yield is the amount of product expected to be recovered in a chemical reaction, assuming perfect conversion of all reactants to products.
To calculate the theoretical yield of your product, you need to know the mass of each of the reactants and the stoichiometry of the reaction.
Let's assume that the reaction is A + B → C. The theoretical yield is equal to the mass of reactant A multiplied by the stoichiometry of C, divided by the stoichiometry of A. The equation looks like this:
Theoretical Yield = (Mass of Reactant A) × (Stoichiometry of C) / (Stoichiometry of A)
For example, if you have 1 g of reactant A, the stoichiometry of C is 2, and the stoichiometry of A is 1, the theoretical yield would be 2 g.
Theoretical Yield = (1 g) × (2) / (1) = 2 g
To know more about Theoretical Yield click on below link:
https://brainly.com/question/14966377#
#SPJ11
what is the product of radioactive decay 0-1e called
Beta particle (β) is the product of radioactive decay 0-1e.
Beta particles (β) are high-energy, high-speed electrons or positrons emitted by certain types of radioactive nuclei such as potassium-40, carbon-14, and strontium-90, among others. Beta particles, like alpha particles and gamma rays, are one of the three forms of ionizing radiation produced by radioactive materials.
Unlike alpha particles, which are helium-4 nuclei, beta particles are fast-moving electrons. They may be positively charged (positrons) or negatively charged (negatrons), depending on the isotope. The charge on a beta particle is 1.6 x 10^-19 Coulombs, the same as that of an electron. Beta particles may travel hundreds of feet in air and several millimeters in tissue, and they can penetrate clothing and skin.
Learn more about Beta particle here:
https://brainly.com/question/24304097
#SPJ11
5
Use this equation for the next question.
Mg(OH)2 + NaCl ® MgCl₂ + NaOH
Does it satisfy the Law of Conservation of Matter?
Yes
No
Answer:
Chemistry Secondary School answered Mg (OH)₂ + HCl→ MgCl₂ + H₂O balance it Answer 5.0 /5 6 Diabolical Answer: The answer will be; = Mg (OH)₂ + 2 HCl → MgCl₂ + 2 H₂O That's all. Find Chemistry textbook solutions? Class 12 Class 11 Class 10 Class 9 Class 8 Class 7 Class 6 Preeti Gupta - All In One Chemistry 11 3080 solutions
0. 75 moles of hf and 1. 00 mole of naf were added to 1. 00 l of water. To this solution was added 0. 200 mol of naoh. What was the final ph of the solution?.
plz help me I swear to God i will mark you brainiest
on the periodic table of the elements, mercury (hg) has an atomic number of 80 and a mass number of 200.59. it has seven stable isotopes. the most abundant of these probably have
Mercury (Hg) has an atomic number of 80 and a mass number of 200.59. It has seven stable isotopes. The most abundant of these probably have more than 80 neutrons each.
Option A is correct.
What does the term "atomic number" mean?The number of a chemical element in the periodic system, in which the elements are arranged by the number of protons in the nucleus, which increases with increasing number. As a result, the atomic number is also the number of protons in the neutral atom, which is always the same as the number of electrons. The number of protons in an atom's nucleus is known as its atomic number. An element's identity is determined by its number of protons—for example, a carbon atom with six protons is an element, regardless of how many neutrons are present.
An atom's atomic number is the same as the number of protons in its nucleus or electrons in an electrically neutral atom. The number of protons in an atom. A sodium atom, for instance, has 11 electrons and 11 protons.
Incomplete question :
On the periodic table of the elements, mercury (Hg) has an atomic number of 80 and a mass number of 200.59. It has seven stable isotopes. The most abundant of these probably have ________.
A. more than 80 neutrons each.
B. more than 50 neutrons each
C. less than 80 neutrons each
Learn more about atomic number :
brainly.com/question/11353462
#SPJ1
Naming of these compounds
According to the IUPAC nomenclature, the name of the compound is 2-ethyl non-6-ene.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ9
a flat metal surface in an electric cell is its _________ terminal
Answer:
negative
Explanation:
What is tetanus? What are the symptoms and consequences of the disease? Who is at risk of developing tetanus? How do vaccines work? What is the history of the tetanus vaccine? Who should receive the tetanus vaccine? When should people receive the tetanus vaccine? Why is this schedule important? Has there been a change in tetanus incidence in the United States since the vaccine became available? What are the risks of vaccination versus non-vaccination? Do the risks outweigh the benefits? Are there areas in the world in which tetanus is prevalent? If so, does this affect the recommendations for US vaccination?
Answer:
The tetanus vaccine is a dose of the bacterium Clostridium Tetani, in inactive form or even a surface molecule that helps the body to actively form the antibody.
The tetanus vaccine has coverage for life, it is mandatory in those countries where the disease became common, such as the USA, Argentina, Chile, Uruguay among others.
Before a surgical act or a suspicion of exposure with this bacterium, the booster of the tetanus vaccine should be administered quickly.
Explanation:
Tetanus disease generates a tetanization of all the muscles of the organism, generating spasmodic contractions, which make it impossible to function and develop life when it affects the diaphragm as it makes breathing impossible.
Tetanization does not affect differently in age or sex, it only consists of contamination with the bacteria to be sufficient.
The sources of contagion are areas of mud or earth, rusty cutting or sharp elements, and poorly hygienic or abandoned areas. In order for the bacteria to be transmitted or the transmission route to be fulfilled, there must be a lesion of loss of continuity of the epithelium or mucosa.
Which of the following is in French
The floor is pink
A dog barks
A cup with steam coming from it will be hot to touch
Answer:
A dog barks
Explanation:
Write Agree or Disagree below each statement, based on your decision.1. Temperature is the measurement of how hot or cold something is.2. When something heats up, new energy is created, and when something cools down, energy is destroyed.3.When something heats up, it moves faster, and when something cools down, it moves slower.4. Hotter things have more energy than colder things.
1. Temperature is the measurement of how hot or cold something is agree.
2. When something heats up, new energy is created, and when something cools down, energy is destroyed. Disagree.
3.When something heats up, it moves faster, and when something cools down, it moves slower. Agree
4. Hotter things have more energy than colder things. Agree.
1. Temperature is the measurement of how hot or the cold something is. It is the measure of the average kinetic energy of particles in object. Agree.
2. When something heats up, the new energy is created, and when the something cools down, the energy is destroyed. when cool down the something, the movement of the particles or the atoms within that will decreases, not the energy. Disagree.
3.When something heats up, it moves faster, and when something cools down, it moves slower because the particles move faster in the hot things. Agree.
4. Hotter things have more energy than colder things as colder objects' molecules and the atoms move slowly and they have the less thermal energy than the warmer objects. Agree.
To learn more about energy here
https://brainly.com/question/1307300
#SPJ4
points
Sodium and chlorine react together to form sodium chloride. Identify the reactant(s) and product(s?
Sodium and chlorine are the two reactants and sodium chloride is the product.
A very reactive metal called sodium interacts with chlorine gas to form sodium chloride, an inert salt. Chlorine gas is reduced to chloride anions whereas sodium is oxidized to sodium cation (Na+) (Cl-).One mole of sodium and two moles of chlorine gas combine to form two moles of sodium chloride.We are aware that chlorine is a very reactive non-metal and that sodium is a very active metal. Typically, non-metals like halogens tend to receive electrons while metals prefer to expel electrons.Chlorine accepts the electron to create the anion Cl-, and sodium rapidly loses its final shell electron to produce the cation Na+.Sodium, a solid reactant, interacts with greenish-yellow gaseous chlorine to form white crystalline sodium chloride.
Therefore, sodium and chlorine are reactants whereas sodium chloride is the product.
Learn more about chemical reactions:
https://brainly.com/question/11231920
#SPJ9
How can being a mentor help the next generation of chemist?
The mentors will assist the chemist fellows in choosing themes that are appropriate for both the development of the Burg fellow and the undergraduate students' learning experience.
What is a mentor's function? How could a mentor assist you with your research?The mentor's ultimate objective is to make the trainee an autonomous researcher. Sharing expertise and abilities, supervising the trainee's work, assisting the trainee in connecting with other researchers, and providing career counselling are all aspects of mentoring.
What should mentors concentrate on to aid in the learning outcomes of their mentees?Be mentee-focused and build your relationship based on the mentee's particular learning objectives. To assist the development of your mentee, give them unbiased comments and concentrate on their specific actions and behaviours.
To know more about chemist visit:-
https://brainly.com/question/30007736
#SPJ1
17.6 ml of 2-methyl-2-butanol (mm: 88.15 g/mol, d: 0.805 g/ml) is treated with an excess of 8.47 m hcl (mm: 36.46 g/mol). calculate the theoretical yield of t-pentyl chloride mm: 106.59, d: 0.865 g/ml), in ml. report answer to the correct number of sig figs, but do not include units in your answer.
The theoretical yield of the solution has been obtained as 17.1 g
What is the theoretical yield?Let us recall that each time that we hear about a chemical reaction what we are talking about is the combination of two or more reactants and a product must be formed. In this case we are to find the theoretical yield of this reaction.
We have been told that the HCl is in excess thus we have the 2-methyl-2-butanol as the limiting reactant.
Mass of the solution = density * volume
Mass of the solution = 0.805 g/ml * 17.6 ml
= 14.2 g
Number of moles = mass/molar mass
= 14.2 g/88 g/mol
= 0.16 moles
Given that the reaction is 1:1, 0.16 moles of the product is obtained.
Theoretical yield = Number of moles products * molar mass of products
= 0.16 moles * 106.59 g/mol
= 17.1 g
Learn more about Theoretical yield:https://brainly.com/question/14966377
#SPJ1
How do chemists predict the shapes of molecules?
Chemists can't predict the shape of molecules, because the attractive forces between valence electrons are unpredictable.
Chemists can't predict the shape of molecules, because the attractive forces between valence electrons are unpredictable.
Due to the attraction between electrons, valence electrons will be arranged as close to each other as possible.
Due to the attraction between electrons, valence electrons will be arranged as close to each other as possible.
Due to the repulsion between electrons, valence electrons will be arranged as close to each other as possible.
Due to the repulsion between electrons, valence electrons will be arranged as close to each other as possible.
Due to the repulsion between electrons, valence electrons will be arranged as far apart from each other as possible.
Answer:
Yes, it is possible because they have similar intensive properties.
homogeneous mixture
Due to the repulsion between electrons, valence electrons will be arranged as far apart from each other as possible.
Neutral atoms of lead must have 82 protons. Ions must have 82 protons, as well.
Experiments that identified characteristics of atoms provided scientists with atomic weights and atomic numbers, which were used to organize the periodic table.
A covalent bond would form because the electron would be shared so both hydrogens have a full, stable shell.
K and Cl
Polar sugar molecules dissolve in water, which is polar.
High temperatures mean more kinetic energy, which keeps sodium and chlorine ions from combining, which increases solubility.
It accepts protons and only partially dissociates in water.
PH3 is a stronger acid than NH3.
The scientist is investigating Charles’s law, which shows that temperature and volume are directly proportional.
It will likely be unreactive.
Student B, because of the law of conservation of matter.
The atoms have the same electronegativity.
bromine (Br)
No, it will not because iodine is less reactive than chlorine.
6H2O + 6CO2 → C6H12O6 + 6O2
+2
0.24 M
Tungsten (W) changes oxidation numbers from +6 to zero, so it undergoes reduction.
It has a higher boiling point than water, and it likely has stronger electrostatic forces between its molecules than water.
castor oil
Substance B has stronger bonds, and it takes more energy to undergo a phase change.
The student should perform multiple trials of the same experiment, then take the average of all of the results.
The results of several trials are all very close to each other, but they are noticeably different from the accepted value for the boiling point.
Explanation:
100% for the whole Semester A Exam
what is the total number of valence electrons in the lewis structure of xeo4? electrons 2 question content area draw a lewis structure for xeo4. do not include overall ion charges or formal charges in your drawing. if the species contains oxygen, do not draw double bonds to oxygen unless they are needed in order for the central atom to obey the octet rule.
Total number of valence electrons in the Lewis structure of XeO4 is 32.
Valence electrons are electrons that located in the outermost electron shell of an atom. These electrons, being the furthest from the nucleus and thus the least tightly held by the atom, are the electrons that participate in bonds.
Lewis structure - A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule.
Lewis structure of XeO4 is made up of one xenon and four oxygen atom, the xenon is in a central position, and all oxygen is at the surrounding position. There are four double bonds(Xe=O) present in the XeO4 lewis structure. The lewis structure of XeO4 contains 8 pairs of nonbonding electrons and 8 pairs of bonding electrons.
learn more about Lewis structure:
https://brainly.com/question/20300458
#SPJ4
Calculate the molality of 12 percent urea solution
Molality of a solution is defined as the number of moles of solute per kilogram of solvent. The formula for molality is given by the following equation:molality (m) = moles of solute / mass of solvent (in kg)In order to calculate the molality of a 12 percent urea solution, we need to first determine the mass of urea present in the solution.
We know that a 12 percent urea solution means that 12 grams of urea is present in 100 grams of the solution. Therefore, we can calculate the mass of urea in the solution as follows:Mass of urea = (12/100) x 200 g= 24 gNext, we need to convert this mass into moles. The molar mass of urea is 60.06 g/mol. Therefore, the number of moles of urea present in the solution can be calculated as follows:Number of moles of urea = Mass of urea / Molar mass of urea= 24 g / 60.06 g/mol= 0.3996 molFinally, we can use the formula for molality to calculate the molality of the solution as follows:molality (m) = moles of solute / mass of solvent (in kg)= 0.3996 mol / 0.2 kg= 1.998 mol/kgTherefore, the molality of the 12 percent urea solution is approximately 1.998 mol/kg.For such more question on moles
https://brainly.com/question/29367909
#SPJ8
How many moles of hydrogen are produced from the reaction of 3.0 moles of zinc?
Answer:
3 moles
Explanation:
what four elements does halogen bond with?
fluorine, chlorine, bromine, and iodine,
In the geocentric theory the earth is the center of the universe.
A. True B. False
I am not quite sure but I would say A. true. Althought I am not 100% shure this is right.
But here is the reason that I chose this because in a geocentric model the sun, moon, stars, and plantes all orbit around the earth.
Hope this helps :))
Answer: the answer is a which is true .
Explanation: the sun, moon, stars, and plantes all orbit around the earth.geocentric model, any theory of the structure of the solar system (or the universe) in which Earth is assumed to be at the centre of it all, so it is correct . HHOPE IT HELPS YOU .PLEASE GIVE BRAINLIEST .THANKS .
number,423.65 x 10^3 is written incorrectly. Correct the number to proper form andexplain why what you wrote is the correct way.
The given number is written incorrectly because in the integer part of the number there should be a number between 1 and 10, here it is 423, which is not in this interval.
To write it properly, put the decimal dot two place to the left and add 2 to the power of 10. This way:
\(4.2365\times10^5\)