function of scraper tool​

Some vises are designed without screws in order to provide certain advantages and functionalities.

Here are a few reasons why vises may be made without screws:

1. Quick Adjustment: Screwless vises often utilize quick-release mechanisms or lever systems that allow for rapid adjustment of the vise jaws. This can be especially useful in applications where frequent repositioning or changes in workpiece size are required.

2. Increased Speed: Screwless vises enable faster clamping and release of workpieces compared to traditional screw-based vises. This can be advantageous in time-sensitive tasks or high-volume production environments.

3. Improved Precision: By eliminating the play and backlash that can occur with screw-driven mechanisms, screwless vises provide better precision and accuracy. This makes them suitable for applications requiring tight tolerances or delicate workpieces.

4. Accessibility: Screwless vises often feature open designs that allow for easy access to the workpiece from multiple angles. This facilitates machining, inspection, and other operations that require unobstructed access.

5. Ergonomics: The absence of screws in screwless vises can reduce the physical effort required to operate them, providing ergonomic benefits for the user. This is particularly valuable when repetitive clamping actions are involved.

By removing screws and employing alternative mechanisms, screwless vises offer unique advantages in terms of speed, precision, accessibility, and ergonomics, catering to specific needs in various applications.

For more such questions on screws, click on:

https://brainly.com/question/19533787

#SPJ11

To draw the state diagram for the given description, we need to identify the states and transitions based on the behavior of the circuit. In this case, we have two states: State A (output = 1) and State B (output = 0).

The transitions are as follows:

Part B:

To assign binary values to the states, we can use a binary encoding that requires the minimum number of digits. Since we have two states, we can assign '0' to State A and '1' to State B.

Part C:

Based on the states and transitions, we can create a binary-coded state table. Here's an example of how the table would look:

| Present State | Input | Next State | Output |

|---------------|-------|------------|--------|

| A             | 0     | A          | 1      |

| A             | 1     | B          | 1      |

| B             | 0     | A          | 1      |

| B             | 1     | B          | 0      |

Part D:

Assuming the use of JK flip-flops, we can derive the flip-flop input equations and the output equation based on the state table. Here's an example of the equations:

J_A = 0

K_A = 0

J_B = 1

K_B = Q_A

Output = Q_A

Part E:

To draw the logic diagram of the circuit, we would use the derived flip-flop input equations along with the output equation to implement the circuit using logic gates.

Thus, the circuit would include JK flip-flops, AND gates, and possibly other gates depending on the specific implementation.

For more details regarding state diagrams, visit:

https://brainly.com/question/13263832

#SPJ1

The  feature of a thread is checked with a thread micrometer  are:

Major diameter

Pitch diameter

Minor diameter

A thread micrometer is a specialized measuring instrument used to measure the major diameter, minor diameter, and pitch diameter of external threads. The major diameter is the largest diameter of the thread, while the minor diameter is the smallest diameter of the thread. The pitch diameter is the diameter at which the width of the thread and the width of the space between the threads are equal.

The crest radius and root radius of a thread are not typically checked with a thread micrometer. These measurements are instead checked using specialized measuring instruments known as thread profile gauges, which are designed to measure the shape and size of the thread's crest and root.

Read more about thread  here:

https://brainly.com/question/883430

#SPJ1

In short, a lower gear produces more torque at the wheel, as well as faster acceleration and lower vehicle speed. Higher gears result in less torque at the wheel, as well as slower acceleration and higher car speed.

To learn more about torque, refer to:

https://brainly.com/question/19104073

#SPJ1

Answer:

you need to wear eye protection and bake sure that your clamp or you have  a firm grip because the grinder will tend to roll off the edge of the chisel face and it will do what  you would call a kickback

Explanation:

Answer:

Pressurized Liquid

Explanation:

You can remember this easily by thinking, "Hydraulics" Then thinking "Hydro" which is the same thing as water, or liquid.

Answer:

Pressurized Liquid

Explanation:

Think of ”Hydro”, its like water or a liquid.

Dust, dirt, or metal chips can pose a potential eye injury risk in a shop.

Dust, dirt, or metal chips can pose a potential hazard to the eyes and result in eye injury risk in a shop.

It is important to wear proper eye protection when working with tools or materials that can generate flying debris to avoid eye injuries.

This is one of the necessary precautions that should be taken when working in a factory or shop that has flying debris.

Read more about safety measures here:

https://brainly.com/question/14367881

#SPJ1

Answer:

Most plate boundaries are located along the edges of the Earth's tectonic plates. These plates are composed of the Earth's crust and upper mantle, and they move and interact with one another at the boundaries. There are three types of plate boundaries: divergent, convergent, and transform.

Divergent plate boundaries occur where two plates are moving away from each other, typically resulting in the formation of a new oceanic crust. These boundaries are often found along the mid-oceanic ridges, where magma from the Earth's mantle rises up and creates new crust.

Convergent plate boundaries occur where two plates are moving towards each other. These boundaries can take several forms, depending on the type of plates involved. When two oceanic plates converge, one plate is typically subducted under the other, leading to the formation of a deep-ocean trench and the creation of volcanic islands. When two continental plates converge, they can collide and form mountains.

Transform plate boundaries occur where two plates are sliding past each other horizontally. These boundaries are typically found along large faults, such as the San Andreas Fault in California.

Overall, most plate boundaries are located along the edges of the Earth's tectonic plates, where they interact and create the geological features and phenomena that shape the planet.

Answer:  Ignition System

Explanation:

Ignition System is the systems creates and delivers high voltage sparks at the right time to ignite the air-fuel mixture in the combustion chamber.

Automotive ignition systems can be categorised: coil-on-plug, distributor-based, and distributor-free (COP). Early ignition systems delivered the spark at the appropriate time using entirely mechanical distributors.

Thus, it is Ignition System

For more details about types of ignition systems, click here:

https://brainly.com/question/14094081

#SPJ2

Biomedical engineers may need to dilute solutions for several reasons. One common reason is to adjust the concentration of a particular substance to a desired level for experimental or clinical purposes.

Dilution allows for precise control over the concentration of a solution, enabling researchers or healthcare professionals to study the effects of different concentrations of substances on biological systems.

In biomedical engineering, dilution is often employed when working with drugs or therapeutic agents. By diluting a concentrated drug solution, engineers can create different dosages suitable for specific applications. This is crucial for ensuring patient safety and achieving desired therapeutic outcomes.

Additionally, dilution is necessary for calibration and quality control purposes in biomedical engineering. Diluting stock solutions of known concentrations can generate a range of standard solutions used to calibrate instruments, verify measurement techniques, or assess the accuracy of analytical methods.

Dilution plays a critical role in ensuring accurate and reliable data collection, analysis, and experimentation within the field of biomedical engineering.

In summary, dilution is an essential technique for biomedical engineers as it allows them to control the concentration of substances, customize drug dosages, and maintain accuracy in calibration and quality control processes, all of which are vital for research, development, and healthcare applications.

For more questions on Biomedical engineers , click on:

https://brainly.com/question/30235387

#SPJ8

Answer:

Health informatics careers combine concepts and practices from healthcare, computer science, and information science. Professionals in this field can work as computer systems managers, health informationists, and clinical analysts. They can also pursue careers in higher education and applied research.

The volume of 1 liter of liquid water will remain unchanged when the pressure doubles and the temperature remains constant at 14.7 PSI.

The volume of a liquid, such as water, is generally considered to be almost incompressible. Therefore, when the pressure applied to a liquid increases while the temperature remains constant, the volume does not change significantly. This is known as the isochoric or constant volume condition.

In the given scenario, the pressure doubles from 14.7 PSI to 2 * 14.7 PSI = 29.4 PSI. However, since the temperature remains the same, the volume of the liquid water will not be affected. It will still be approximately 1 liter.

This conclusion is based on the fact that water is considered to be incompressible under ordinary conditions. In reality, there may be very small changes in volume due to the compressibility of water, but these changes are typically negligible and can be disregarded for most practical purposes.

For more such questions on pressure,click on

https://brainly.com/question/30117672

#SPJ8

In a cost-benefit analysis, the engineering team aims to evaluate the feasibility and value of installing new, more efficient solar panels on the International Space Station (ISS). They can use the following equation:

Net Benefit = Total Benefits - Total Costs

By using this cost-benefit analysis equation, the engineering team can make an informed decision about the installation of new, more efficient solar panels on the ISS.

For more such question on cost-benefit analysis

https://brainly.com/question/199821

#SPJ8

Answer:Why should a driver conduct a pre-entry check? Allows the driver to check for anyone behind the vehicle, Allows the driver to check for low or flat tires, Allows the driver to check for leaking fluids.

Explanation:

A production process is composed of many components that are each vital in the effective fabrication of a product. These include:

Raw materials: The origin substances which must be used to produce an item come from vendors as either natural elements like lumber, metals, or chemicals; or part-finished objects.

Machinery and equipment: Necessities for producing a product by transforming raw material into completed goods, varying the tools utilized such as cutting machines, assembly lines, or 3D printers subject to the purpose of making the product.

Labor: Essential to operate the machinery, implement quality control, and supervise the whole manufacturing procedure, utilizing both trained and untrained staff members.

Production management: Constructing plans, establishing organizational systems, supervising the fabrication activity to achieve efficiency and timely results, implicating issues including stock keeping, planning meets schedules, and allocating resources.

Quality control:A significant fact of the production action that ascertains the last form of the article accomplishes its projected excellence model. This system involves inspecting, evaluating, and examining items at various phases of the construction to recognize and amend any shortcomings.

Read more about production here:

https://brainly.com/question/14293417
#SPJ1

What are the key components, their functions, and the working principles involved in a typical production process?

Answer:

The ( Fall Protection in Construction ) is the term which relates to these mechanisms , i.e , guardrail system, a positioning system and a personal fall arrest system.

Explanation:

thanks me later

Answer:

The ( Fall Protection in Construction ) is the term which relates to these mechanisms , i.e , guardrail system, a positioning system and a personal fall arrest system.

WAS THIS ANSWER HELPFUL ?

MARK ME AS A BRAINLIEST

Answer:

Polyethylene glycol (PEG) is a biocompatible, synthetic, hydrophilic polyether compound that has many applications, mostly in the medical industry, but also in the chemical and industrial sectors.

Explanation:

Answer:

increase

Explanation:

Following are the calculation to the amperage rating:

Given:

Using electricity \((W) = 12 \ kilowatts= 12 \times 1000= 12000\ watts\)

Using time \((T)=6 \ hours\)

Voltage circuit \((v)=120 \ volt\)

To find:

amperage rating=?

Solution:

Using formula:

\(\to A =\frac{W}{v}\\\\\)

       \(=\frac{12000}{120}\\\\=100\ amperes\)

amperage rating\(=\frac{100}{6}=12.5 \ amperes\)

Therefore, the final answer is "12.5 amperes".

Learn more:

brainly.com/question/9555048

Answer:

A combination of high and low sensors are used to tell the control panel when water levels are too high or too low. The control panel will then automatically turn the pump on or off depending on the corrective action needed.

Explanation:

purpose of all components in a water level sensor​

Answer:

1. The maximum length overall length of the part is 4 inches

2. The material with which the part is fabricated is 0.25 inch thick Hot Rolled Steel

Explanation:

The information given in the drawing are;

The angle of projection of the drawing = Third angle projection

The thickness of the material = 0.25" plate

The material with which the part is fabricated = 0.25 inch thick HRS

HRS is the acronym for Hot Rolled Steel

Therefore;

The material with which the part is fabricated is 0.25 inch thick Hot Rolled Steel

The scale of the drawing = 1:1 = which is 1 is to 1 drawing

The maximum length overall length of the part, l = 4 units

By visually testing the 1:1 scale drawing measurements of 4 units is comparable 4 inches measurement with an online ruler

Therefore;

The maximum length overall length of the part, l = 4 inches

The connecting rod is attached to the piston using a wrist pin.  (Option B)

The wrist pin,also known   as a piston pin or gudgeon pin, serves as the pivot point between the connecting rod and the piston.

It is inserted into   small bores in the piston and connected to the big end of the connecting rod,allowing the piston to move up and down while maintaining a secure connection to the connecting rod.

The con-rod connects the   piston to the crankshaft, allowing combustion pressure to be transferredto the crankpin.

Learn more about connecting rod at:

https://brainly.com/question/32341788

#SPJ1

Answer:

Explanation:

Steel is the metal that using in planes.

Aluminum and titanium also used in this aircraft industry.

Aluminum is ideal for aircraft manufacture because it's lightweight and strong.

hope this helps!!

have a nice day!

follow me ==> Hi1315

Answer:

steel

Explanation:

The metals used in the aircraft manufacturing industry include steel, aluminium and titanium with each possessing certain qualities that make them ideal for this use.

In order to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

The diameter of the wheel is given as 540mm, so the radius of the wheel is half of that: 540mm / 2 = 270mm. The circumference of the wheel can be calculated as 2π times the radius: 2π × 270mm

≈ 1696.62mm.

Since the circumference of the wheel is approximately 1696.62mm and point P traces out a circle, the locus of point P will be a circle with a circumference of 1696.62mm.

Hence, to draw the locus, we can construct a circle with a radius of 1696.62mm centered at the center of the culvert.

Learn more about locus on

https://brainly.com/question/13941750

#SPJ1

Analytical skills are vital in the above case as one will be able to weigh the pros and cons of choosing a person with the rights degree and they can find solutions to the problems.

Analytical skills is known to be those skills that helps a person to look at information or any situation and tell the elements, or strengths as well as its weaknesses and use these to solve the problem.

Note that Analytical skills are vital in the above case as one will be able to weigh the pros and cons of choosing a person with the rights degree and they can find solutions to the problems

Learn more about f analytical skills from

https://brainly.com/question/27276969

#SPJ1

Answer:

69420

Explanation:

The series of numbered instructions that control a machine's movements and functions to create a part is known as a program or code.

This code is typically created using computer-aided design (CAD) software and then translated into a machine-readable format such as G-code or M-code.

The program specifies the precise movements, speeds, and operations that the machine must perform in order to manufacture the part according to the desired specifications. The code is then loaded into the machine's controller, which executes the program and guides the machine in the production process.

Read more about machine code here:

https://brainly.com/question/28588385

#SPJ1

Answer:

True

Explanation:

This is 100% correct