For a simple cubic crystal structure; the value of n = 1 since there is only one atom associated each unit cell.
Furthermore, for the unit cell edge length a = 2R and we have A = 74.5 g/mol & R = 0.145nm, using equation

Answer:Bio team

Explanation:

aluminum (Al)

Aluminum has an atomic mass of 26.98

Iron has an atomic mass of 55.85

If both have the same mass finished, the aluminum camshaft must be larger.

Answer:

Agricultural engineers attempt to solve agricultural problems concerning power supplies, the efficiency of machinery, the use of structures and facilities, pollution and environmental issues, and the storage and processing of agricultural products.

AASHTO assumes a deceleration value in calculating stopping sight distance (SSD) of B. 11.2 ft/s^2. This doesn't take any road defects into account.

The impulse response of the filter is: h[n] = 8[n] + 0.61808[n-1] + 8[n-2].

The given options represent different expressions for the impulse response of the notch filter. To determine the correct expression, we need to analyze the characteristics of the magnitude plot provided. In a frequency response magnitude plot, the peaks or notches indicate the frequencies at which the response is significantly attenuated or amplified.

Since the notch filter is designed to attenuate a specific frequency or range of frequencies, we can infer that the impulse response should have a peak or notch corresponding to the same frequency range.

Looking at the given expressions, the only option that matches this characteristic is h[n] = 8[n] + 0.61808[n-1] + 8[n-2]. This expression includes a positive coefficient (0.61808) in the middle term, which would cause a notch in the frequency response plot. Therefore, this is the most suitable expression for the impulse response of the notch filter based on the provided information.

To learn more about notch filter click here

brainly.com/question/1581446

#SPJ11

Complete Question

The magnitude of the frequency response of a notch filter is given below. Note: the vertical label of the plots should read |.II(f )| Which of the following expressions is the impulse response of the filter? 3.5 3 2.5 H 1.5 0.5 9.5 -0.4 -0.3 -0.2 -0.1 0.1 0.2 0.3 0.4 0 0.5 O h[n]=8[n]+1.6188[n-1]+8[n-2] O h[n]=8[n]-1.6188[n-1]+&[n-2] O h[n]=8[n]+0.61808[n-1]+8[n-2] O h[n]=8[n] -1.90215[n -1]+&[n - 2] Points possible:1 Allowed attempts: 3 Retry penalty: 33.333%

Answer:

Those in which the diaphragm is sealed with one side in the fluid to be pumped, and the other in air or hydraulic fluid. The diaphragm is flexed, causing the volume of the pump chamber to increase and decrease. ... Those employing one or more unsealed diaphragms with the fluid to be pumped on both sides.

Answer:

kindly check the explanation section.

Explanation:

The word ''sprawl'' as it is related to people and population simply means an irregular expansion and the word ''urban'' simply means a city. So, putting both together as "urban sprawl" simply means an irregular expansion of cities or town.

Urban sprawl is majorly caused by race and land and the characteristics of urban sprawls are: [1]. there is High dependency on automobiles, [2]. the development is dispersed, and [3]. there is low density.

Answer:

Q ≅ 1.53 m³/s

Explanation:

From the given information:

The flow rate of the orifice is:

\(v = c_v \sqrt{2gh}\)

\(v = 0.90 \times \sqrt{2*9.81 * 10}\)

where;

\(Q = c_d \times \sqrt{2gh} \times A\); &

\(c_d = c_c \times c_v\)

∴

\(Q = c_c \times c_v \sqrt{2gh} \times \dfrac{\pi}{4}\times d^2\)

\(Q = 0.90 \times 0.62 \sqrt{2*9.81*10} \times \dfrac{\pi}{4}\times 0.5^2\)

\(Q = 0.558 \times 14.00714104 \times 0.1963495408\)

Q ≅ 1.53 m³/s

If your truck has a  starter button , you must first turn the engine key to the ‘on’ position before engaging it.

An ignition switch, starter switch, or start switch is a switch in a motor vehicle's control system that activates the vehicle's primary electrical systems, including "accessories."

The ignition switch is a critical component of an automobile. It starts and stops the car's engine, as well as the electrical in-car devices. It also powers the starting motor of the automobile. The ignition switch not only turns on and off the engine, but it also powers the lights and radio.

Learn more about Trucks:
https://brainly.com/question/13928690
#SPJ1

Full Question:

If your truck has a(n) _____, you must first turn the engine key to the 'on' position before engaging it. *

10 points

A. starter button

B. engine brake

C. clutch button

D. cruise control

I inferred you want literal editing of the text above.

Explanation:

Here's a correction of the sentences:

1. The author, an expert in cybersecurity will speak via Zoom on Wednesday.

In this sentence, punctuation mark ( , ) was added and the word  'this' was replaced with 'on'.

2. Williams' book contains many illustrations, which makes it easy to read.

Added punctuation and made a revision of the sentence.

3. Based on the available evidence, the university administrators have opted for a hybrid format for the fall, which begins September 20.

Mainly added punctuations to make the senstence clarer.

4. (Thesis statement) I believe Free laptops should be offered to all students who need them.

Made a few additions.

Software application life cycle simply means the application of standard practices to software applications building.

This is an incomplete information. Therefore, an overview of the software application life cycle will be given. It's the process of planning, creating, testing, and deployment of an information system.

Software application life cycle is divided into six steps which are planing requirements, designing, building, documentation, testing, deployment, and maintenance.

Learn more about software on:

https://brainly.com/question/1538272

Answer:

I think A is correct

The two technicians are right in their given assessment about the use of collapsible steering columns and collapsible brake pedals to reduce the risk of trapping the driver's feet.

This refers to the vehicular movement from one point to another, obeying traffic rules, and respect for other drivers and pedestrians.

Hence, we can see that with regards to safe driving, the opinions of both Technicians A and B are both correct as they both want the safety of the car and the driver.

Read more about safe driving here:

https://brainly.com/question/26084890

#SPj2

In Wireshark, the Protocol column filter that would display only packets transported over a wireless network is "802.11".

Explanation:

Wireshark is an open-source network analysis tool that captures and examines network traffic. Its interface presents data in a very intuitive and readable format, with all information being displayed in real-time. The application is designed to work with all major operating systems, and it can be used to troubleshoot network problems, detect and diagnose network attacks, and ensure network performance and stability.

There are different filters in the Wireshark protocol columns, such as TCP, ICMP, Telnet, 802.11, etc. However, to view only packets transported over a wireless network, the 802.11 protocol column filter should be used. This filter displays all packets that are being transported over a wireless network.

To learn more about wireless Wireshark : https://brainly.com/question/14568459

#SPJ11

The graph of the function y = (sin x)/(x * 2-1) is given in the attached image.

Recall that a graph is a visual representation of data or depiction of the mathematical relationships between various factors in a mathematical function.

A function in math is a rule, or theorem defining a connection between one variable (the independent variable) and another (the dependent variable).

It is to be noted that functions are common in mathematics and are required for the formulation of physical connections in the sciences.

Learn more about functions at;
https://brainly.com/question/25638609

#SPJ1

The kind of cable most appropriate for cost effective performance is the fiber optic cable

While fiber optic cables are generally more expensive than copper cables, the use of multimode fiber would be the most cost-effective solution without sacrificing performance in the case of EMI interference.

Multimode fiber can provide high bandwidth and transmission speeds over short distances, making it a suitable choice for most office networks.

Additionally, fiber optic cables are immune to EMI, which can disrupt copper cables. By using multimode fiber, the technician can ensure reliable network connectivity for the office without breaking the budget.

Read more about fiber optic cables at: https://brainly.com/question/116766

#SPJ1

Answer:

43.2%

Explanation:

Given that,

Heat absorbed by a carnot heat engine, \(Q_1=235\ kW\)

Heat rejected to the atmosphere, \(Q_2=164\ kW\)

We need ti find the thermal efficiency of the heat engine. It is equal to the ratio of output work to the energy supplied. Its mathematical form is given by :

\(\eta=1-\dfrac{Q_1}{Q_2}\\\\\eta=1-\dfrac{235}{164}\\\\\eta=-0.432\)

or

\(\eta=-43.2\%\)

The egative value of efficiency shows work is done by the engine.

Answer:

The first one.

Explanation:

The first one without a doubt

this is perfect.........

Answer:

you have to think then go scratch and then calculate and the design  

Explanation:

The statistical analysis of a dataset inform a design process.

Statistical analysis is a kind of tool which helps collect and analyze large amounts of data. This is helpful to identify common patterns of dataset and make trends to convert them into meaningful information.

Designers do make use of statistical analysis of dataset in design process.

Analysis is a key part of design process.  Without analysis, nothing can be done in designing process.

Learn more about statistical analysis

https://brainly.com/question/14724376

#SPJ2

The simplest circuit that can be used for the control circuit must produce an output of 1 if at least two of the conditions 1,2 and 3 are true is given below.

A special kind of circuit known as a control circuit is used to regulate the performance of a totally independent power circuit. Think about a water pump being driven by a 1,000 horsepower, large industrial motor. A high voltage electrical source with a 2,400 volt output is connected to the motor.

For the safety of the operator and the machinery, a control circuit is used to ensure that the motor is started and stopped safely.

The thermostat for a home's air conditioner is an illustration of a control circuit that is frequently used. The thermostat is a component of a low-voltage control circuit that manages a relay that actually activates and deactivates the power circuit to the air conditioner compressor.

See the given attachment below for the simplest circuit↓↓

Learn more about control circuit

https://brainly.com/question/28625332

#SPJ4

Answer:

What specific fluid goes in the windshield wipers.

Distilled water

How much to put in fluid ounces?

There should be a tiny bit more than 3/4 of the way full.

Answer:

Option B: False

Explanation:

A heat engine is a device which operates in a manner that heat is converted into mechanical work.

A simple example of a heat engine is a drinking bird. The oscillatory motion of the drinking bird is as a result of the thermal expansion and contraction of a chemical compound in its beak, which creates an imbalance in its position of equilibrium. This causes it to oscillate.

Heat engines usually work by extracting heat once there is a temperature gradient available in the system and using it to perform work. Another good example is the internal combustion engine. It extracts heat from the explosion of the burning fuels and uses it to power the car.

From the given figures of ideal op amps, the voltage gain and input resistance of each circuits is 10kΩ

The voltage gain of the inverting amplifier is given by

G = V₀ / V₁

= R₂/ R₁

= 100k / 10K

=-10 V/V

Therefore, the voltage gain of the inverting amplifier is-10 V/V

The input resistance is Rₙ = R₁

Rₙ = 10kΩ

Therefore, the input resistance is 10kΩ

Voltage gain and input resistance are important parameters in the design and analysis of electronic circuits, particularly amplifiers. Voltage gain is a measure of how much an amplifier can increase the voltage of an input signal. It is defined as the ratio of the output voltage to the input voltage, usually expressed in decibels (dB). A high voltage gain indicates that the amplifier can amplify weak signals to a much larger level. Input resistance, on the other hand, is the resistance presented by an amplifier to the input signal. It is important to match the input resistance of an amplifier with the output resistance of the signal source to ensure maximum power transfer. In general, a high input resistance is desirable as it minimizes loading effects on the signal source. Both voltage gain and input resistance are critical in the design of amplifier circuits. While a high voltage gain amplifies the signal, it can also introduce noise and distortion. Therefore, it is important to balance the voltage gain and input resistance to achieve the desired performance characteristics of the amplifier.

To learn more about parameters click here

brainly.com/question/30263052

#SPJ4

Answer:

In Python:

grade = float(input("Enter a Number: "))

if grade >= 90:

   print("Great!")

Explanation:

This prompts the user for grade

grade = float(input("Enter a Number: "))

This checks for input greater than or equal to 90

if grade >= 90:

If yes, this prints "Great"

   print("Great!")

During normal operation, refrigerant pumped into a condenser is in the form of a gas.

The process of maintaining the temperature of the desired space lower than that of the surroundings is called refrigeration. In the process of refrigeration, the chemical used is called refrigerant.

In the cycle of refrigeration, the liquid form of the refrigerant took heat from the desired space in the evaporator and is taken by the compressor where it is compressed at a high temperature and pressure greater than that of an atmosphere.

The refrigerant now is pumped to the condenser in the form of high-pressure and high-temperature gas. Here it loses its heat to the atmosphere and condenses in the form of liquid.

Therefore, during normal operation, refrigerant pumped into a condenser is in the form of a gas.

To know more about refrigeration follow

https://brainly.com/question/26395073

#SPJ4

As per the given data, Inertial velocity of point Q relative to point O:

I vQ/O = IωB × OQ = 0 [since IωB is zero]

a) Transformation tables between frames:

Frame B (Disk frame):

- Origin: Center of the disk

- xB-axis: Tangent to the circular path of the rolling disk

- yB-axis: Radial direction, pointing towards the center of the circle

- zB-axis: Perpendicular to the disk, pointing outwards

Frame I (Inertial frame):

- Origin: Fixed point O

- xI-axis: Tangent to the circular path of the rolling disk

- yI-axis: Radial direction, pointing towards the center of the circle

- zI-axis: Perpendicular to the plane of rotation, following the right-hand rule

b) Angular velocities and trigonometric functions:

ψ˙: Angular velocity of the disk about its center (frame B)

ψ˙ = 2π/τ  [since the disk completes one revolution in time τ]

˙θ: Angular velocity of the disk about the fixed point O (frame I)

˙θ = ψ˙ = 2π/τ

ϕ˙: Angular velocity of the disk relative to the fixed point O (frame I)

ϕ˙ = ˙θ - ψ˙ = 0 [since the disk rotates about O without slipping]

sin θ: Sin of the angle between the radial direction and the zI-axis

sin θ = r/R

cos θ: Cos of the angle between the radial direction and the zI-axis

cos θ = √(1 - (r/R)^2)

c) Angular velocity of B with respect to I:

IωB = ϕ˙ yI = 0

d) Angular acceleration of B with respect to I:

IαB = I d/dt (IωB) = 0 [since ϕ˙ is constant]

e) Inertial velocity of point Q relative to point O:

I vQ/O = IωB × OQ = 0 [since IωB is zero]

Thus, the B-frame unit vectors do not appear in the final answers since the disk is rolling without slipping, and the angular velocity and angular acceleration of the disk are both zero.

For more details regarding velocity, visit:

https://brainly.com/question/30559316

#SPJ1

If the steering wheel refuses to turn (due to a malfunction, mechanical issue, or other reasons), the ESC will take control and steer towards the designated/emergency/alternative curve.

Electronic stability control, also known as electronic stability program or dynamic stability control, is a computerized device that enhances the stability of a vehicle by detecting and decreasing traction loss.

It acts automatically and applies brakes to individual wheels without any human interaction. It prevents serious accidents by not allowing the automobile to slide. If the car loses control, it may roll over. Such accidents can be averted using ESC.

Learn more about Electronic Stability Control at:

https://brainly.com/question/28041098

#SPJ1

Answer:

The Scrum Master is a key role in the Scrum framework for agile project management. The Scrum Master's primary role is to ensure that the Scrum team follows the Scrum process and values, and to remove any impediments that may prevent the team from achieving their goals.

Some of the specific responsibilities of a Scrum Master include:

Facilitating the Scrum process: The Scrum Master is responsible for facilitating all Scrum ceremonies, including daily stand-ups, sprint planning, sprint review, and sprint retrospective meetings. They ensure that all participants understand the purpose and goals of each ceremony, and that the ceremonies are conducted effectively.

Protecting the team: The Scrum Master acts as a shield for the Scrum team, protecting them from external distractions and interruptions that could prevent them from achieving their sprint goals. They also ensure that the team has a safe and productive working environment.

Removing impediments: The Scrum Master identifies and removes any obstacles that may impede the team's progress. They work closely with team members to understand the root cause of any impediments and help the team find creative solutions to overcome them.

Coaching the team: The Scrum Master is responsible for coaching the team on the Scrum process and values, as well as agile principles and practices. They help the team continuously improve their processes and practices to increase efficiency and productivity.

Ensuring transparency: The Scrum Master ensures that there is transparency and visibility into the team's progress, by maintaining the Scrum board, updating burndown charts, and communicating progress to stakeholders.

Overall, the Scrum Master is a servant-leader who supports the Scrum team in achieving their goals and helps them continuously improve their processes and practices.

Hope this helps!

The device that is used to ensure power to a server or network device during short power outages is called an (d)  Uninterruptible Power Supply (UPS). A UPS is a backup power source that provides power to critical equipment during a power outage.

It is designed to provide short-term power protection by ensuring a stable flow of electricity to the device it is connected to. UPS typically provides power from batteries that are charged continuously when the device is plugged in and is being supplied with power. UPS is essential for businesses that rely on computer systems and other electronic equipment to operate efficiently. It protects the equipment from power surges, brownouts, and other power-related issues that can cause damage to the equipment and data loss.

A line conditioner can also provide power protection, but it mainly focuses on regulating the voltage to ensure that it is stable and safe for the equipment. Surge protectors only protect against voltage spikes and surges, but they do not provide backup power. Backup generators can provide long-term power protection, but they take time to start up and may not be suitable for short-term power outages. In summary, a UPS is the best option for ensuring power to a server or network device during short power outages. It provides backup power that is essential for critical equipment that needs to operate continuously, such as servers, switches, and routers.

Learn more about Uninterruptible Power Supply  here-

https://brainly.com/question/31536929

#SPJ11