design an experiment discussing how you will determine what your unknown sample is using a flame test.

If more \(H_{2}\) and \(N_{2}\) are added to the reaction 3\(H_{2}\) + N2 → 2\(NH_{3}\) after it reaches equilibrium, two events will occur Shift in Equilibrium and Increased Yield of \(NH_{3}\)

1. Shift in Equilibrium: According to Le Chatelier's principle, when additional reactants are added, the equilibrium will shift in the forward direction to consume the added reactants and establish a new equilibrium. In this case, more \(NH_{3}\) will be produced to counteract the increase in \(H_{2}\) and \(N_{2}\).

2. Increased Yield of \(NH_{3}\): The shift in equilibrium towards the forward reaction will result in an increased yield of \(NH_{3}\). As more \(H_{2}\) and \(N_{2}\) are added, the reaction will favor the production of \(NH_{3}\) to maintain equilibrium. This will lead to an increase in the concentration of \(NH_{3}\) compared to the initial equilibrium state.

It is important to note that the equilibrium position will ultimately depend on factors such as the concentrations of \(H_{2}\), \(N_{2}\), and \(NH_{3}\), as well as the temperature and pressure of the system. By adding more reactants, the equilibrium will adjust to achieve a new balance, favoring the formation of more \(NH_{3}\).

Know more about Le Chatelier's principle here:

https://brainly.com/question/2943338

#SPJ8

The chemical name for ClO₃⁻ is "chlorate ion". Therefore, the name of HClO₃ is chloric acid. The correct option is E.

The ClO₃⁻ ion is known as the chlorate ion, which indicates that it is an anion (negatively charged ion) made up of chlorine and oxygen atoms. When hydrogen (H⁺) is added to this ion, it forms an acid.

In this case, HClO₃ is formed, which is known as chloric acid. The name of a compound can provide important information about its chemical composition and properties. It is important to understand the nomenclature of compounds to communicate effectively in chemistry.

Chlorous acid (option D) is the name given to the acid formed by adding H⁺ to ClO₂⁻, which is known as the chlorite ion. Hydrochloric acid (option A) is formed when hydrogen (H⁺) is added to chlorine gas (Cl₂), whereas chloroform (option B) is a different compound altogether, which is formed by reacting methane with chlorine. Hydrogen trioxychloride (option C) is not a valid name for any known compound.

Thus, E is the correct option.

To know more about chemical name, refer to the link below:

https://brainly.com/question/30631355#

#SPJ11

Answer:

B. a military unit

Explanation:

Answer:

9.10938356 × 10-31 kilograms

Explanation:

lightest stable subatomic particle known. It carries a negative charge of 1.602176634 × 10−19 coulomb, which is considered the basic unit of electric charge. The rest mass of the electron is 9.1093837015 × 10−31 kg, which is only 1/1,836the mass of a proton.

Answer: Hope This Helps

Explanation:

Here's just some additional information: Electron Mass In physics, the electron mass or mass of electron or electron rest mass one of the fundamental constants and is defined as the mass of a stationary electron. Denoted by m e. The value of electron mass is also known as the invariant mass of an electron

(Also, the screenshot is the answer. Also, can i have brainliest so i can go to next rank! Thanks and have a blessed day!)

Answer

1.50 mol

Explanation

Given:

Initial volume, V₁ = 25.0 L

Mass of CH4 gas in 25.0 L container = 40 g

Final volume, V₂ = 15.0 L

From the Periodic Table; molar mass of CH4 = 16.04 g/mol

What to find:

The new amount in mole.

Step-by-step solution:

According to Avogadro’s law: For a confined gas, the volume (V) and number of moles (n) are directly proportional if the pressure and temperature both remain constant. That is:

n₁ = Mass/Molar mass = (40.0g/16.04 g/mol) = 2.493765586 mol

n₂ is the new amount in mole and can be calculated as follows:

The new amount in moles is 1.50 moles

ANSWER

EXPLANATION

Given that;

Follow the steps below to find the grams of H2SO4

Step 1; Find the number of moles of H2SO4 using the below formula

Recall, that Avogadro's number is 6.02 x 10^23

Step 2; Find the mass of H2SO4 using the formula below

Recall, that the molar mass of 98.079 g/mol

Answer:

The branch of knowledge dealing with engineering or applied sciences is called technology .

Hope this helps you!

The cube root of a number is the reverse of the cube of a number and it can be found by prime factorization method. The cube root of 8000 is 20.

Prime Factorization is the finding which prime numbers multiply together to make the original number. A prime number is a natural number greater than 1 that is not a product of two smaller natural numbers. A natural number greater than 1 that is not prime is called a composite number.

Prime factorization of 8000 is 2 × 2 × 2 × 2 × 2 × 2 × 5 × 5 × 5

Simplifying the above expression: \(2^{6}\) * \(5^{3}\)

Simplifying further: \(20^{3}\)

Therefore, the cube root of 8000 by prime factorization is (2 × 2 × 2 × 2 × 2 × 2 × 5 × 5 × 5)1/3 = 20.

To learn more about Prime factorization please visit:

https://brainly.com/question/18187355

#SPJ4

Are there any answer choices that go along with the question??

Answer:

It will turn blue

Explanation:

Its chemical formula is NH3, and anything that touches that dissolves into a blue liquid!

Hope I helped!

The balanced chemical equation is:

0.5C7H16 + O2 → 0.5CO2 + H2O

For balancing the chemical equation C7H16 + O2 → CO2 + H2O, we can use linear algebraic techniques. We need to determine the coefficients that balance the number of atoms on both sides of the equation.

Let's denote the coefficients for C7H16, O2, CO2, and H2O as a, b, c, and d, respectively.

The balanced chemical equation can be written as:

aC7H16 + bO2 → cCO2 + dH2O

To balance the carbon (C) atoms, we have:

7a = c (Equation 1)

To balance the hydrogen (H) atoms, we have:

16a = 2d (Equation 2)

To balance the oxygen (O) atoms, we have:

2b = 2c + d (Equation 3)

We have three equations (Equations 1, 2, and 3) and four unknowns (a, b, c, d). To solve this system of equations, we can write it in matrix form and find the solution using linear algebraic techniques.

The augmented matrix for the system of equations is:

[ 7 0 -1 0 | 0 ]

[ 0 0 0 -2 | 0 ]

[ 0 -2 2 -1 | 0 ]

By performing row operations to row-reduce the augmented matrix, we can obtain the solution:

[ 1 0 -0.5 0 ]

[ 0 1 -1 -0.5 ]

[ 0 0 0 0 ]

The solution to the system of equations is:

a = 0.5

b = 1

c = 0.5

d = 1

Putting the values of a,b,c, and d we get the balanced chemical equation as:

0.5C7H16 + O2 → 0.5CO2 + H2O

To learn more about balancing, visit:

https://brainly.com/question/31242898

#SPJ11

Answer:

Dipole-dipole

Explanation:

CuSO4 + 2 NaOH = Na2SO4 + Cu(OH)2 is well balanced

Answer:

0.694 cents per second

Explanation:

25x100=2500 cents per hour, 2500/60 = 41.67 per minute and 41.67/60=0.694 cents per second

The hydrated ions are free to move around when ionic salts dissociate in aqueous solutions. Their movement, however, is random, and there is no charge.

After separating a solid substance into its ions, the ions are ready for reactions. When a compound is solid, the ions are held together by electrostatic attractions. To allow ions to move freely, it must first be dissolved in solution. Consider the reaction between sodium chloride and silver nitrate. Both of these compounds are commonly available in solid form. First, you would dissolve both solids in a solution, in this case water. (See Equations 1 and 2)

Once the solid has dissolved and separated into its ions in solution, these ions are ready to react in the chemical reaction (Equation 3).

Keep in mind that the AgNO3(aq) and NaCl(aq) reactants demonstrate that the ions are in solution. In other words, AgNO3(aq) is the same as Ag+(aq)+NO3(aq), and NaCl(aq) is the same as Na+(aq)+Cl (aq). The equation in Equation 3 represents a double displacement reaction, which means that cations in the reactants exchange anions to form the products. A precipitate is formed in the laboratory that we identify as silver chloride.

To learn more about ions react refer to:https://brainly.com/question/22277121

#SPJ1

The pH scale ranges from 0 to 14, with values below 7 considered acidic, 7 being neutral, and values above 7 being alkaline. Hair and scalp have a slightly acidic pH, and using a pH-balanced shampoo helps maintain the natural balance.

The characteristic that identifies a pH-balanced shampoo is having a pH level close to the natural pH level of the hair and scalp, which is around 4.5 to 5.5. Therefore, a pH-balanced shampoo will have a pH level in the acidic to neutral range, typically between 4.5 and 5.5, to avoid causing damage or disrupting the natural pH balance of the hair and scalp.

Learn more about natural pH here ;

https://brainly.com/question/5171852

#SPJ11

A pH-balanced shampoo should have a pH between 4.5 and 5.5, contain mild acids or bases, and help to keep the hair and scalp's natural pH level balanced.

A pH-balanced shampoo is important because it prevents the scalp from becoming too dry or too oily. It ensures that the hair cuticle is closed, reducing frizz and improving shine. Using a pH-balanced shampoo can also help maintain the effectiveness of other hair products.

https://brainly.com/question/32512053

#SPJ6

The unknown product in the given chemical equation is potassium chloride (KCl).

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and potassium sulfite (\(K_2SO_3\)) is as follows,

\(\[2\text{HCl}(aq) + \text{K}_2\text{SO}_3(aq) \rightarrow \text{H}_2\text{O}(l) + 2\text{KCl}(aq)\]\)

In this reaction, hydrochloric acid (HCl) reacts with potassium sulfite             (\(K_2SO_3\)) to form water  and potassium chloride (KCl). The coefficient 2 in front of HCl indicates that two moles of hydrochloric acid react with one mole of potassium sulfite. The reaction can be understood as follows: the HCl donates a hydrogen ion (H+) to the sulfite ion , forming water and chloride ions (Cl-). At the same time, potassium ions (K+) from the \(K_2SO_3\) dissociate and combine with chloride ions to form potassium chloride (KCl). Overall, the reaction between HCl and \(K_2SO_3\) results in the formation of water and potassium chloride as the unknown product.

Learn more about moles here:

https://brainly.com/question/30885025

#SPJ11

Answer:

Global wind

Explanation:

The jet streams go around the whole earth from west to east

Hope you have a good day :)

Answer:

Explanation:

Primary and secondary succession occur after both human and natural events that cause drastic change in the makeup of an area. Primary succession occurs in areas where there is no soil and secondary succession occurs in areas where there is soil.

In primary succession, newly exposed or newly formed rock is colonized by living things for the first time. In secondary succession, an area previously occupied by living things is disturbed—disrupted—then recolonized following the disturbance.

Hope this helped :)

-Akito

Answer:

A: an iron alloy.

Explanation:

Because iron alloy consists of minor components that are distributed within the major component, which is the basic requirement for a solution.

Because it improves food preservation and breaks down the sugars in the dough, the dough is fermented and proofed.

The ideal temperature for fermentation is 85° F.

What is fermentation?

Anaerobic degradation of molecules like glucose occurs chemically during fermentation.

What is proofing?

When making yeast bread and other baked goods, the process of proving involves letting the dough rest and rise one last time before baking. While the dough is resting, yeast ferments it and releases gases, leavening the dough.

To learn more about fermentation:

https://brainly.com/question/20073558

#SPJ4

The answer is E) 2.41 m.

The molality (m) of a solution is defined as the number of moles of solute per kilogram of solvent.

To determine the molality of the solution, we need to first calculate the mass of the solvent (water) in kilograms:

Mass of H2O = number of moles of H2O × molar mass of H2O

Mass of H2O = 11.5 mol × 18.015 g/mol = 207.1725 g = 0.2071725 kg

Next, we can calculate the molality of the solution using the formula:

molality = number of moles of solute / mass of solvent in kg

Number of moles of solute (CaF2) = 0.500 mol

Therefore, the molality of the solution is:

molality = 0.500 mol / 0.2071725 kg = 2.41 m

Therefore, the answer is E) 2.41 m.

To know more about molality refer here

brainly.com/question/30640726#

#SPJ11

The electrolyte deficiency of Sodium triggers the secretion of renin. The answer is 1.

The deficiency of sodium triggers the secretion of renin. Renin is an enzyme produced and released by special cells in the kidneys called juxtaglomerular cells. It plays a key role in regulating blood pressure and fluid balance in the body. When the sodium levels in the body are low, it signals the juxtaglomerular cells to release renin into the bloodstream.

Renin then initiates a series of biochemical reactions that ultimately lead to the production of angiotensin II, a potent vasoconstrictor. Angiotensin II causes blood vessels to constrict, which helps to increase blood pressure.

Therefore, the answer is 1.

To know more about electrolyte deficiency, refer here:
https://brainly.com/question/32080991
#SPJ11

A deficiency in Sodium triggers the secretion of renin, a hormone released by the kidneys that acts to increase sodium reabsorption to maintain blood volume and blood pressure.

The electrolyte deficiency which triggers the secretion of renin is Sodium. The kidneys regulate electrolyte levels and when there is a deficiency in sodium, this signals a need for increased blood volume. The decrease in sodium level stimulates the release of renin, a hormone released by the kidneys, which then activates the renin-angiotensin-aldosterone system (RAAS). This system acts to increase sodium reabsorption, helping to elevate blood volume and blood pressure.

https://brainly.com/question/32325669

#SPJ11

A titration reached the equivalence point when 16.1 ml of was added to of naoh (aq) of unknown concentration. The concentration of the unknown NaOH solution is 0.0644 M.

We can use the formula:

M acid × V acid = M base × V base

where V is the volume in liters and M is the molarity.

At the equivalence point, the moles of acid (HCl) are equal to the moles of base (NaOH). We can use this information to solve for the unknown concentration of NaOH:

M NaOH × V NaOH = M HCl × V HCl

We are given the volume of HCl (16.1 mL or 0.0161 L) and the volume of NaOH (25.0 mL or 0.0250 L), and we know the molarity of the acid (0.100 M). To solve for M NaOH, we can rewrite the equation as follows:

M NaOH = (M HCl × V HCl) ÷ V NaOH

M NaOH = (0.100 M × 0.0161 L) ÷ 0.0250 L

M NaOH = 0.0644 M

Therefore, the concentration of the unknown NaOH solution is 0.0644 M.

To learn more about moles, refer:-

brainly.com/question/20486415

#SPJ4

The five scientists who contributed to the discovery of the cell are Robert Hooke, Antonie van Leeuwenhoek, Matthias Schleiden, Theodor Schwann, and Rudolf Virchow.

The discovery of the cell as the fundamental unit of life involved the collective efforts of several scientists. Robert Hooke, an English physicist, was the first to observe and name cells while examining cork under a microscope in 1665.

Around the same time, Antonie van Leeuwenhoek, a Dutch scientist, improved microscopes and made detailed observations of various microorganisms, further advancing our understanding of cells.

In the mid-19th century, Matthias Schleiden, a German botanist, proposed that all plants are composed of cells, and Theodor Schwann, a German zoologist, extended this concept to animals.

Their combined work led to the formulation of the Cell Theory, which states that cells are the basic building blocks of all living organisms.

Rudolf Virchow, a German physician, later contributed to the development of the Cell Theory by emphasizing the idea that cells arise only from pre-existing cells, rejecting the notion of spontaneous generation. Virchow's work highlighted the significance of cell division and its role in growth, development, and disease.

Through their cumulative efforts, Hooke, van Leeuwenhoek, Schleiden, Schwann, and Virchow made significant contributions to our understanding of cells, paving the way for modern cell biology and numerous advancements in the field of life sciences.

for such more questions on  discovery

https://brainly.com/question/8041368

#SPJ8

Total heat generated by 2 mole of TiO2(s) is 4.963kJ.

The amount of heat released in the reaction of 2.89 mol of TiO2(s) can be calculated using the following equation: q = nCΔT, where n is the number of moles, C is the specific heat capacity of TiO2, and ΔT is the change in temperature.

The specific heat capacity of TiO2 is 683. 697. J/kgK. and the change in temperature is is 25k. By plugging in the values and converting J to kJ,

q = 2.89 * 25 * 683.697

=> 4963.35

In brief, the amount of heat released by 2.89 mol of TiO2(s) is 4.963kJ.

To know more about specific heat capacity click on below link:

https://brainly.com/question/16952828#

#SPJ11

Complete question :

determine how much heat (in kj) of 2.89 mol of tio2(s) with a temperature difference of 25k

Answer: Um what is it?

Explanation:

The balanced titration reaction for the given scenario is:
Sn2+ (aq) + 2Fe3+ (aq) + 2H2O (l) → Sn4+ (aq) + 2Fe2+ (aq) + 4H+ (aq)

In this reaction, Sn2+ from the tin solution reacts with 2 Fe3+ from the iron solution and 2 H2O molecules. This results in the formation of Sn4+ ions, 2 Fe2+ ions, and 4 H+ ions. The indicator electrode and SCE reference electrode are used to monitor the potential difference between the two electrodes during the titration, which helps to determine the endpoint of the reaction and the concentration of the tin solution. A solution of the iron solution is used to titrate the tin solution to the endpoint.
Now, let's write the balanced titration reaction:
Step 1: Write the half-reactions for the species involved in the redox reaction.
Sn2+ → Sn4+ + 2e- (Oxidation half-reaction)
Fe3+ + e- → Fe2+ (Reduction half-reaction)
Step 2: Balance the electrons in both half-reactions.
To balance the electrons, multiply the reduction half-reaction by 2 to match the number of electrons in the oxidation half-reaction:
2(Sn2+ → Sn4+ + 2e-)
2(Fe3+ + e- → Fe2+)
Step 3: Combine the half-reactions to form the balanced redox reaction.
2Sn2+ + 2Fe3+ → 2Sn4+ + 2Fe2+
So, the balanced titration reaction is:
2Sn2+ + 2Fe3+ → 2Sn4+ + 2Fe2+

learn more about reaction here

https://brainly.com/question/29039149

#SPJ11