Define physical and chemical properties, provide three examples of each, DISCUSS THEIR REVERS ABILITIES, and
explain the fundamental differences between them.
I really need the reverse abilities.

When a carboxylic acid is reacted with a base, it will produce a carboxylate salt. the correct option is (b).

The reaction between a carboxylic acid and a base will result in the formation of a carboxylate salt. When a carboxylic acid is neutralized with a base, it loses a hydrogen ion from the carboxyl group and produces a carboxylate salt, which is composed of the negative ion of the acid and the positive ion of the base.

Here's the balanced chemical equation: HRCOOH + NaOH → HRCOO⁻Na⁺ + H₂O

The carboxylic acid, therefore, acts as a Bronsted-Lowry acid and the base as a Bronsted-Lowry base.

The salt produced in the reaction can be converted back to the original acid by the addition of a strong acid like HCl, leading to the formation of the acid and the respective salt. The reaction of carboxylic acids with bases is, therefore, a type of neutralization reaction.

When a carboxylic acid reacts with an alcohol in the presence of an acid catalyst, an ester is formed, while a carboxylic acid reacts with another carboxylic acid to form an anhydride.

Hence, the correct option is a carboxylate salt.

To know more about carboxylic acid, refer here:

https://brainly.com/question/29035899#

#SPJ11

The conversion of 0.057km to m in the given question would be 57 m.

What do you mean by Conversion?

Conversion is the process of changing a substance from one form to another. A chemical reaction, for example, can change a solid into a liquid, a liquid into a gas, or a gas into a solid. Conversion can also refer to the process of transforming a substance from one chemical state or form to another, for example, from an element to a compound or from an acid to a base.

Step 1: Write down the given conversion.

Given: 0.057 km to m

Step 2: Determine the conversion factor.

1 km = 1000 m

Step 3: Set up the conversion so the desired unit is on top.

1000 m/1 km

Step 4: Multiply the conversion factor by the given quantity.

1000 m/1 km x 0.057 km = 0.057 x 1000 m

Step 5: Simplify the expression.

0.057 x 1000 m = 57 m

Hence, option C is correct.

To know more about conversion,

brainly.com/question/17604357

#SPJ1

Correct question:

Convert 0.057km to m

a. 0.000057m

b. 0.57m

c. 57m

d. 570m

A muonic atom is created when a muon, which has a mass of 105.7 MeV/c, combines with a proton. Muons and electrons are similar in nature, but muons are more massive than electrons.

Answers of the given questions are below :

(a) The radius of the first Bohr orbit of a muonic atom can be calculated using the formula for the Bohr radius:

r = ε₀h² / πmeμ

where ε₀ is the vacuum permittivity, h is Planck's constant, me is the mass of the electron, and μ is the reduced mass of the muonic atom.

Using the given mass of the muon and the mass of the proton, we can calculate the reduced mass:

μ = meMp / (me + Mp) = 186.6 MeV/c²

Substituting the values and solving for r, we get:

r = 0.00054 nm

(b) The magnitude of the lowest energy state can be calculated using the formula:

E = -μe⁴/8ε₀²h²n²

where e is the elementary charge and n is the principal quantum number.

For n=1, we get:

E = -207.2 eV

(c) The shortest wavelength in the Lyman series can be calculated using the formula:

1/λ = R∞(1/n₁² - 1/n₂²)

where R∞ is the Rydberg constant and n₁ and n₂ are the initial and final quantum numbers, respectively.

For the Lyman series, n₁=1 and n₂=2. Substituting the values and solving for λ, we get:

λ = 187.5 nm

To know more about the muonic atom refer here :

https://brainly.com/question/28529640#

#SPJ11

Answer:

NO 2200! 800 proprobably

Explanation:

just did wrong

Answer:

800 kJ

Explanation:

Answer: This is the process of chemical change. Examples of chemical properties are flammability (a material's ability to burn in the presence of oxygen) and reactivity (how easily a material combines chemically with other materials).

Explanation: Chemical properties are properties that can be measured or observed only when matter undergoes a change to become an entirely different kind of matter. They include reactivity, flammability, and the ability to rust. ... Flammability is the ability of matter to burn. Burning of wood is a chemical change as new substances which cannot be changed back (e.g. carbon dioxide) are formed. For example, if wood is burned in a fireplace, there is not wood anymore but ash. ... Special details which do not change in a substance without new substances being formed are called physical properties.

Answer:

chemical property

Explanation:

Answer: argon

Explanation:

using the last clue “avg atomic mass of 3.33x greater than carbon-12” we can deduce the atomic mass of the element is 12x3.33=40(2sf) hence its argon. we can further confirm from third clue that it is a noble gas hence unreactive

Approximately 3.72 liters of C2H2 are required to produce 8 L of CO2 at STP.

We can use stoichiometry to determine the amount of C2H2 required to produce 8 L of CO2 at STP.

According to the balanced equation, 2 moles of C2H2 react with 5 moles of O2 to produce 4 moles of CO2 and 2 moles of H2O. This means that the ratio of C2H2 to CO2 is 2:4 or 1:2.

At STP, 1 mole of any gas occupies 22.4 L. Therefore, 8 L of CO2 corresponds to 8/22.4 ≈ 0.357 moles of CO2.

Since the ratio of C2H2 to CO2 is 1:2, we need half as many moles of C2H2 as moles of CO2:

0.357 moles of CO2 × (1 mole of C2H2 / 2 moles of CO2) = 0.179 moles of C2H2

Now we can use the ideal gas law to convert moles of C2H2 to liters at STP:

PV = nRT

where P is the pressure (1 atm), V is the volume (unknown), n is the number of moles (0.179 moles), R is the gas constant (0.0821 L·atm/K·mol), and T is the temperature in Kelvin (273 K at STP).

Solving for V, we get:

V = nRT/P = (0.179 mol)(0.0821 L·atm/K·mol)(273 K)/(1 atm) ≈ 3.72 L

For more question on C2H2 click on

https://brainly.com/question/1596622

#SPJ11

Out of the given options, the greatest pressure would be represented by option D) 62106 Pa.

In order to compare the pressures given in different units, we can convert them to a common unit.

Here, we can convert them to the SI unit of pressure which is pascal (Pa).1 atm = 101325 Pa (approximately)1 mmHg = 133.322 Pa (approximately)1 psi = 6894.76 Pa (approximately)

So, we have:0.680 atm = 0.680 × 101325 Pa ≈ 69057.6 Pa517 mm Hg = 517 × 133.322 Pa ≈ 68910.2 Pa11.4 psi = 11.4 × 6894.76 Pa ≈ 78767.5 Pa62106 Pa = 62106 Pa14.1 = unclear (there is no unit provided)

Therefore, Out of these, the greatest pressure is represented by option D) 62106 Pa as it is already in pascals.

To know more about pressures click here.

https://brainly.com/question/30673967

#SPJ11

According to the graph, only the reactant A was present at the beginning of the reaction.

The graph shows the concentration for the reactant A and the product that is A2. In this graph, the concentration is displayed on the vertical axis, while the horizontal axis shows the time.

In general terms, it can be observed that at the beginning only the reactant A is present, but as the reaction occurs the concentration of this reactant decreases, while the concentration of the product A2 increases.

Learn more about reactions in https://brainly.com/question/30464598

#SPJ1

The empirical formula of the product in question 5.79 can be determined by finding the ratio of the elements present.

Given that a 29.3 g sample of Ti reacts with O2 to form 48.9 g of product, we need to calculate the moles of Ti and O in the reaction. The molar mass of Ti is 47.87 g/mol, so the moles of Ti in the sample is:

moles of Ti = mass of Ti / molar mass of Ti

moles of Ti = 29.3 g / 47.87 g/mol = 0.612 mol

To find the moles of O, we can use the difference in mass between the sample and the product:

mass of O = mass of product - mass of Ti

mass of O = 48.9 g - 29.3 g = 19.6 g

The molar mass of O is 16.00 g/mol, so the moles of O in the product is:

moles of O = mass of O / molar mass of O

moles of O = 19.6 g / 16.00 g/mol = 1.225 mol

Now we can find the empirical formula by dividing the number of moles of each element by the smallest number of moles:

Empirical formula = Ti(0.612 mol) O(1.225 mol) = TiO2

Therefore, the empirical formula of the product is TiO2.

The given information provides the masses of titanium (Ti) and oxygen (O) in the reaction. By converting these masses to moles and comparing their ratios, we determine the empirical formula of the product to be TiO2. This means that the product contains one titanium atom and two oxygen atoms per formula unit.

Learn more about  empirical formula here:

https://brainly.com/question/32125056

#SPJ11

The molality of the 36% HCl solution is approximately 9.93 mol/kg.

The molality of a solution is defined as the number of moles of solute per kilogram of solvent. To calculate the molality, we first need to determine the number of moles of solute present in the solution. The concentration of a solution expressed as a percentage by mass indicates the mass of solute per 100 grams of solution. So, 36% HCl by mass means that 36 grams of HCl is present in 100 grams of solution. We can convert this to moles by dividing the mass by the molar mass of HCl, which is approximately 36.5 g/mol.

36 g HCl / 36.5 g/mol = 0.993 moles HCl

Next, we need to determine the mass of solvent in the solution. Since the solution is aqueous, the solvent is water. We can assume the density of water to be 1 g/mL, so 100 mL of water would have a mass of 100 g.

0.993 moles HCl / (100 g water / 1000 g/kg) = 0.00993 mol/kg or 9.93 mol/kg (rounded to one decimal place)

So, the molality of the 36% HCl solution is approximately 9.93 mol/kg.

Learn more about molality:

brainly.com/question/26921570

#SPJ4

After that, the speeds of the molecules are calculated at the two different temperatures as given in the question and then, the ratio is calculated by dividing.

Here, T is the temperature,

         m is the mass of the molecules and

         R is the Gas constant.

Let's taken an example of the two temperatures are as follows:

\(T_{1}\)=270K

\(T_{2}\)=30K

We know that the root mean square speed of the molecules is given as:

 \(V_{rms} = \sqrt{\frac{3RT}{M} }\)

Putting the values of the temperatures and calculating the root mean square speeds of the molecules:

\(V_{rms1} = \sqrt[]{\frac{3R*270}{M} }\)

\(V_{rms2} = \sqrt{\frac{3R*30}{M} }\)

Dividing the above two root mean square speed equations in order to get the ratio of the two, we get,

⇒ \(\frac{V_{rms1} }{V_{rms2} } = \frac{\sqrt{\frac{3R*270}{M} } }{\sqrt{\frac{3R*30}{M} } }\)

⇒ \(\frac{V_{rms1} }{V_{rms2} } = \sqrt{\frac{9}{1} }\)

⇒ \(\frac{V_{rms1} }{V_{rms2} } = \frac{3}{1}\)

Hence, the ratio of the root mean square speeds of the molecules of an ideal gas at 270K and 30K is 3:1.

Note: It is important to note that the root-mean-square speed is the measure of the speed of particles in a gas, defined as the square root of the average velocity-squared of the molecules in a gas. The mass and the Gas constant values for a particular gas remain the same and only temperature is the variant.

To know more about root mean square speeds, check:

https://brainly.com/question/13095222

#SPJ4

Answer:n some ways, upwelling can be a mixed blessing to coastal ecosystems. It can infuse coastal waters with critical nutrients that fuel dramatic productivity,

Explanation:

Coral reefs is the marine ecosystem which depends on upwelling from the seafloor to maintain its high productivity.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1061425

#SPJ2

Option C. The character has a mass of 85. zero kg and weighs 305 N mercury is three.59 Venus is eight.87 Earth is 9. eighty-one mars three.77: C.earth

Earth is expected to be 4.54 billion years old, plus or minus about 50 million years. Scientists have scoured the Earth looking for the oldest rocks to radiometrically date. In northwestern Canada, they determined rocks approximately four.03 billion years vintage.

The earliest existence on earth might have been just as purple as its miles green nowadays, a scientist claims. ancient microbes might have used a molecule other than chlorophyll to harness the solar rays, one which gave the organisms a violet hue. The third planet from the sun, Earth is the handiest region in the acknowledged universe shown to host existence. With a radius of 3,959 miles, Earth is the 5th largest planet in our sun machine, and it's the handiest one regarded as positive to have liquid water on its floor. Earth is also unique in phrases of monikers.

Learn more about Earth here:

https://brainly.com/question/25624188

#SPJ1

Answer:

Temperature stays constant.

Explanation:

During a phase change, the temperature does not change. Temperature will only change when a phase change is completed.

Ionic bonds will be a metal + a nonmetal, and electrons

are transferred from the metal to the nonmetal.

A covalent bond will be a nonmetal only. Nonmetals will not give up their electrons so electrons are shared.

I have also written this on the whiteboard in the image provided.

The sludge generation process refers to the production of sewage treatment residue during wastewater treatment. Sludge contains solid and semi-solid materials that must be handled and disposed of properly to protect human health and the environment.

The following are some methods for sewage disposal:

Wastewater Treatment: Initial treatment involves the physical removal of large solids, whereas secondary treatment uses biological processes to break down organic matter and remove dissolved pollutants.

Sludge Treatment: The separated sludge is under further treatment, which may include stabilization, dewatering, and, in some cases, additional processes to reduce contaminants.

Land Application: Treated sludge can be applied to agricultural land as a fertilizer or soil conditioner if it meets regulatory guidelines and has been properly treated.

Landfills: If sludge cannot be reused or recycled, it can be disposed of in a designated landfill that meets regulatory requirements, ensuring proper containment and preventing soil and water contamination.

For more information regarding sludge and sewage disposal:

https://brainly.in/question/8504457?utm_source=android&utm_medium=share&utm_campaign=question

Answer: A. It doubles

Explanation:

When \(CO_{2}\) and \(H_{2} CO_{3}\) are both horizontal lines, the rate of the forward reaction is the same as the rate of the reverse reaction. The reaction is occurring at equilibrium, with no net change in the concentrations of reactants and products over time.

When the concentration of carbon dioxide \(CO_{2}\) and the concentration of carbonic acid \(H_{2} CO_{3}\) are both horizontal lines, it indicates that their concentrations remain constant over time. In such a scenario, the rate of the forward reaction is the same as the rate of the reverse reaction. A horizontal line on a concentration-time graph suggests that the concentrations of the reactants and products are not changing, implying that the reaction has reached equilibrium. At equilibrium, the rate of the forward reaction equals the rate of the reverse reaction. This is a fundamental principle of chemical equilibrium, described by the principle of microscopic reversibility.

For more question on reaction

https://brainly.com/question/25769000

#SPJ8

Explanation:

surface tension and heat of vaporization

d. The polymorphic form of fat crystals is in a glassy state is NOT true.

The statement that the polymorphic form of fat crystals is in a glassy state is not true. Polymorphism refers to the ability of a substance to exist in multiple crystal structures or forms. Lipids, including fats, can exhibit polymorphism, meaning they can crystallize in different arrangements or crystal forms.

When it comes to the texture of foods containing lipids, the polymorphic form of fat crystals does play a significant role. The specific crystal form and arrangement of the lipids can affect the texture of the food, influencing factors such as mouthfeel, creaminess, and stability.

The solid fat content versus temperature profile is an essential factor in determining texture, as stated in option a. The morphology of the crystals formed, as mentioned in option b, also plays a crucial role in texture. Option c is true as well, as foods containing partially crystalline lipids can exhibit a "plastic" texture.

However, option d is not accurate because the polymorphic form of fat crystals can exist in various states, including crystalline and semi-crystalline states, but not in a glassy state. Glassy states are typically associated with amorphous materials rather than crystalline structures.

To learn more about lipids, here

https://brainly.com/question/14915606

#SPJ4

The ΔG° for the overall reaction if this process is coupled to the conversion of sulfur to sulfur dioxide at 177 C is 79.5 kJ/mol.

What is ΔG°?

ΔG° represents the standard Gibbs free energy change of a reaction. It is a thermodynamic quantity that indicates the spontaneity of a reaction under standard conditions. ΔG° is determined by the difference between the standard Gibbs free energy of the products and the standard Gibbs free energy of the reactants.

Cu₂S(s) → 2Cu(s) + S(s)

We can calculate the ΔG° for this reaction using the equation:

ΔG° = ΣΔG°f(products) - ΣΔG°f(reactants)

Reactants:

ΔG°f(Cu₂S) = -79.5 kJ/mol

Products:

ΔG°f(Cu) = 0 kJ/mol

ΔG°f(S) = 0 kJ/mol

ΔG° = [2 × ΔG°f(Cu)] + [ΔG°f(S)] - [ΔG°f(Cu₂S)]

= [2 × 0] + [0] - [-79.5]

= 79.5 kJ/mol

Therefore, ΔG° for the overall reaction is 79.5 kJ/mol. Since the ΔG° is positive, the reaction is non-spontaneous under standard conditions and simply heating chalcocite will not be sufficient to extract copper from the ore.

To learn more about ΔG°,

https://brainly.com/question/30311101

#SPJ4

Answer:

Propane

Explanation:

Answer:

A mixture is a material composed of two or more simpler substances in chemistry.

Explanation:

Answer:

Explanation:

When you use electricity to charge your car, you can integrate renewable resources like solar into the fueling process. Without solar, your electric vehicle is still effectively running off of fossil fuels – it's just the fossil fuels utilized at the power plant and not within your engine.

Fossil fuels include substances like natural gas, coal, and oil. It is possible for electric cars to run on these fossil fuels. Fossil fuels like coal are burnt up to generate electricity. So when cars run on electricity, they are indirectly tapping into fossil fuels.

Learn more here:

https://brainly.com/question/10172005

The two filename extensions associated with webpages are .html and .htm. These extensions indicate that the file contains hypertext markup language (HTML) code, which is used to create web pages.

While .html is the more commonly used extension, .htm is also frequently used and is simply a shorter version of the same extension. Both extensions are widely recognized and understood by web browsers, making it easy to create and share web pages with these file types.

Therefore, the two filename extensions associated with webpages are .html and .htm. Both of these extensions indicate that the file is a Hypertext Markup Language (HTML) document, used for displaying content on the web.

To know more about filename extensions, refer

https://brainly.com/question/1982059

#SPJ11

Because a flux-pressure curve is initially measured before the pore size distribution is determined, the liquid displacement method is an indirect approach for determining the pore size distribution of a membrane.

Water displacement method - To do this, all you need to do is place the food in a resealable zipper-lock bag, and then carefully lower the bagged food into the cooking vessel filled with water. Air is forced through the top of the bag by the water's pressure. Carefully seal the bag once the majority of the air has been removed, just above the water line.

Total volume minus liquid volume equals volume of the thing.

6.2 mL minus 5.5 mL equals 0.7 mL.

Now, the object's density will be;

Mass / volume equals density (Liquid - Displacement).

We swap out

Density = 0.66 g / 0.7 mL (Liquid - Displacement)

Density = 0.942857 0.94 g/mL (Liquid - Displacement).

As a result, the cube's density for the liquid displacement method is 0.94 g/mL.

To know more about water displacement method, click on the link below:

https://brainly.com/question/23861956

#SPJ9