Consider four identical bulbs connected in series to a battery. A fifth bulb is then connected in parallel with the first four. What will this additional connection do? Please explain why.
a) Increase the illumination produced by bulbs connected in series
b) Decrease the illumination produced by bulbs in series
c) Tt will change the illumination shomehow, but we need to know the voltage on battery and resistances of bulbs to answer
d) Leave the illumination produced by bulbs in series unchanged

Voltage depends on the amount of resistance, current according to the Ohm's law, and, by definition, is the measurement of electrical pressure.

According to the Ohm's Law,  the current through a conductor between two points is directly proportional to the voltage across the two points.

Mathematically,

V ∝ I

V = IR

where, R is the resistance of the conductor and I is the current flowing in the conductor. So, the voltage depends on the amount of resistance and current.

Also, Voltage is the pressure from an electrical circuit's power source that pushes charged electrons (current) through a conducting loop, enabling them to do work such as illuminating a light.

Hence All of the above option in the given question are true.

To know more about Ohm's Law, refer:

https://brainly.com/question/1247379?referrer=searchResults

To find the mass in kilograms, you need to know the object's weight in newtons and the acceleration due to gravity. The formula for finding mass is mass = weight / acceleration due to gravity. So if you have an object with a weight of 100 N and the acceleration due to gravity is 9.8 m/s^2, the mass would be 10.204 kg.

The mass of the block is 0.025 kg or 25 g, when the spring has k = 28 N/m, and compresses 0.11 m before bringing the block to rest.

For more questions on mass

https://brainly.com/question/86444

#SPJ8

The power to stop the car with kinetic energy of a car is  \(8*10^{6} J\) as it travels along a horizontal road is  \(8*10^{5} watt\), option B

Kinetic energy can be seen as one that is been recorded when an object is able to move from a place , in a broad term we can say this is the energy that can be attributed to that of someone leaving a place and go to another place hence we can see it as the one in the motion.

The definition of energy as the "power to accomplish work" refers to the capacity to apply a force that moves an object. Even if the word is vague, it is clear what energy actually means: it is the force that causes objects to move. The two types  can be attributed to the one we know which are kinetic and potential energy.

\(Power \frac{Energy}{time}\)

\(Energy = 8*10^{6} J\)

\(time = 10 s\)

\(Power = \frac{8*10^{6} J}{10}\)

\(power = 8*10^{5} watt\)

Learn more about  kinetic energy  at:

https://brainly.com/question/8101588

#SPJ1

proper question;

The kinetic energy of a car is 8 × 106 J as it travels along a horizontal road. How much power is required to stop the car in 10 s? (A) zero joules (B) 8  105 J (C) 8  107 J (D)8  104 J (E) 8  106 J​

Answer:

औडंठः की दुनिया कार्टून दर्शन होली है और यह बियर का अच्छा विकल्प है। विकल्प है। यो कुरा मेरो आफ्ना लागि विचार र त्यहाँको बडेमाको बिल्डिङ भित्र म जिन्दगी एक यात्रा हो कहाँबाट शुरु भइ कहाँ पुगेर अन्त हुन्छ

In order to measure the potential difference across one of the bulbs in the circuit, the voltmeter must be connected in parallel with it. So, option D.

When two points in a circuit have different electric potentials, a voltmeter is a tool or instrument that measures their potential difference.

We are aware that a voltmeter is a tool that measures the same potential drop in all configurations that are in parallel.

The potential difference between two points in a circuit is thus always measured by connecting a voltmeter in parallel across the conductor's ends.

To learn more about voltmeter, click:

https://brainly.com/question/31441611

#SPJ1

Answer:

It contains approximately 14,568.7 square meters

Explanation:

Area Units Conversion

There are several units to express the area of a shape:

\(cm^2,\ m^2,\ km^2,\ ft^2,\ in^2,\ acres, \ hectares\)

The process of expressing the area from one unit to the other is called a conversion.

Specifically, we are interested in converting from acres to square meters. The rule to make the conversion is:

\(1 acre = 4,046.86\ m^2\)

The plot of land has 3.6 acres, thus its area is:

\(3.6 * 4046.86 =14,568.696\ m^2\)

It contains approximately 14,568.7 square meters

Answer: A. If the surface aquifer has a high water table

Explanation:

The water table refers to the water level underground. If it is high, it means that the water underground is close to the surface such that if a well was dug, it would not need to be dug too far for water to be seen.

When heavy rain falls, flooding is avoided if the water is either able to run off efficiently or if the ground is able to absorb the water. When the water table is high, it means that the ground will not be able to absorb much because the water is already close to the surface which means that should heavy rain fall, there will most likely be a flood.

The kind of equation that can be used to differentiate the kind of separatrix that shows change on motion is

H = 2g/l.

A simple pendulum can be defined as the equipment that displays an oscillatory motion when a mass is tied on a rope and is suspended from it.

The various movements that occur using a simple pendulum is translational ( side to side) or continuous circle (oscillatory motion).

The equation that show that a change from one type of motion to another is H = 2g/l.

Learn more about motion here:

https://brainly.com/question/453639

#SPJ1

(a) The amplitude of the wave is 0.2 m.

(b) The period of the wave is  4 s.

(c) The wavelength of the wave is 100 m.

(a) The amplitude of the wave is the maximum displacement of the wave.

amplitude of the wave = 0.2 m

(b) The period of the wave is the time taken for the wave to make one complete cycle.

period of the wave = 5.5 s - 1.5 s = 4 s

(c) The wavelength of the wave is calculated as follows;

λ = v / f

where;

f = 1/t = 1 / 4s = 0.25 Hz

λ = ( 25 m/s ) / 0.25 Hz

λ = 100 m

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

Answer:

2.1 m/s

Explanation:

According to law of conservation of momentum;

m1u1 + m2u2 = (m1+m2)v

m1 and m2 are the masses

u1 and u2 are the initial velocities

v is the common velocity

Given

m1 = 2150kg

m2 = 3250kg

u1 = 10.0m/s

u2 = ?

v = 5.22m/s

Substitute and get u2

2150(10) + 3250u2 = (2150+3250)5.22

21,500 + 3250u2 = 5400(5.22)

3250u2 = 28,188 - 21500

3250u2 = 6688

u2 = 6688/3250

u2 = 2.1 m/s

Hence the 3250 kg car’s initial velocity has an initial velocity of  2.1 m/s

The paragraph primarily discusses the concept of overwinding old clocks and its consequences, indicating that overwinding clocks used to be a common mistake. Here option D is the correct answer.

The paragraph explains that overwinding occurs when the mainspring is almost fully wound, but the operator continues to turn the winding key, resulting in the spring coiling too tightly or even breaking.

This suggests that overwinding was a mistake commonly made in the past when operating old-fashioned clocks. The other options, such as clocks changing over the years or clocks becoming fragile with age, are not directly addressed in the paragraph and are therefore less supported.

The option e. "time flies when you're having fun" is unrelated to the paragraph and can be disregarded as an irrelevant answer choice. Hence option D is the correct answer.

To learn more about overwinding

https://brainly.com/question/20709424

#SPJ8

Answer:

a = ω^2 A      formula for max acceleration (ignoring sign)

V = ω A         formula for max velocity

V^2 = ω^2 A^2 = a A   from first equation

E = 1/2 M V^2 = 1/2 * 2.98 * 3.55 * .0805 = .426 J

(kg * m/sec^2 * m = kg m^2 / sec^2 = Joule

Answer:

doubled

Explanation:

When thrust is double so will the pressure I hope this helps

enjoy

Answer:

2 m/s2

Explanation:

Newton's 2nd law:

F=ma

20 N= (10 kg)a

a= 2 m/s2

The total equivalent resistance of the circuit which consists of 4 resistors ( 1202, 180, 320 and 3802 ) connected in series is 50.1 KΩ

Resistance of resistor,

Total equivalent resistance, R = R1 + R2 + R3 + R4

R = 12000 + 18 + 32 + 38000

R = 50.1 KΩ

Equivalent resistance is a another way of indicating total resistance. The equivalent resistance will be of a single resistor that replaces the total network without altering any effect on the system.

Therefore, the total equivalent resistance of a series circuit consists of 4 resistors connected in series: 1202, 180, 320, and a 3802 is 50.1 KΩ

To know more about total equivalent resistance

https://brainly.com/question/28258048

#SPJ1

Answer:

B.

Divide the height of the valley walls by the rate of erosion.

Explanation:

There is a relationship between the rate of erosion and the hieght at which it is eroded according to Newton's law of motion. In the case of the scenario above, the best way to determine the time the river started carving the valley would be the division of the height of the valley walls by the rate of erosion.

Answer:

So, with 2 Faraday of electricity, we can decompose (2/4 × 2) = 1 mole of water. So 18 grams of water is decomposed.

The interval between the first and second echo is 7 seconds. This means that after the initial sound wave reaches the first cliff, it takes a total of 7 seconds for the sound to travel to the second cliff and then return to the student as the second echo.

To determine the interval between the first and second echo, we need to consider the time it takes for sound to travel from the student to the first cliff, and then from the first cliff to the second cliff, and finally back to the student.

Let's break down the distances and calculate the time for each part of the journey:

Distance from the student to the first cliff: 330 meters

Time taken: t₁ = distance / speed = 330 m / 330 m/s = 1 second

Distance from the first cliff to the second cliff: 990 meters

Time taken: t₂ = distance / speed = 990 m / 330 m/s = 3 seconds

Distance from the second cliff back to the student: 990 meters

Time taken: t₃ = distance / speed = 990 m / 330 m/s = 3 seconds

Now, we can calculate the total interval between the first and second echo by adding up the individual times:

Interval between first and second echo = t₁ + t₂ + t₃ = 1 s + 3 s + 3 s = 7 seconds

Therefore, the interval between the first and second echo is 7 seconds. This means that after the initial sound wave reaches the first cliff, it takes a total of 7 seconds for the sound to travel to the second cliff and then return to the student as the second echo.

It's important to note that this calculation assumes a straight path for the sound waves and neglects factors such as air temperature and wind that can affect the speed of sound. Additionally, it assumes perfect reflection of sound waves off the cliffs, which may not be the case in real-world scenarios.

For more such questions on echo visit;

https://brainly.com/question/30750512

#SPJ8

Note the complete questions is:

A student stands 330m from a tall cliff which is 990m from another tall cliff. If the speed of sound between the cliffs is 330m/s.What is the interval between the first and second echo?

Answer:

Accuracy measures how close results are to the true or known value. Precision, on the other hand, measures how close results are to one another.

Accuracy means the state of being accurate, without any mistakes and the results should be 100% true.

Whereas, precision means, approximately true or almost true.

Hope it help you

Answer:

Kilogram

Explanation:

Answer:

Crown glass

Explanation:

We can use Snell's Law to determine the material through which the light is passing.

Snell's Law states that n1 sinθ1 = n2 sinθ2, where n1 and n2 are the indices of refraction of the two materials, θ1 is the angle of incidence, and θ2 is the angle of refraction.

In this case, we know that the angle of incidence is 26.7 degrees, and the angle of refraction is 36 degrees. We also know that air has an index of refraction of approximately 1.

Using Snell's Law, we can solve for the index of refraction of the material:

1 sin 26.7 = n2 sin 36

n2 = (1 sin 26.7) / (sin 36)

n2 ≈ 1.52

The index of refraction of the material is approximately 1.52. This corresponds to the index of refraction of crown glass, which is a common optical material used in lenses and prisms. Therefore, the light is most likely passing through crown glass.

Answer: In cases a, b, and c, the only force acting on the stone is the force of gravity, mg, straight downward. In case d, the force of gravity also acts straight downward, however, there is an applied force with greater magnitude acting upward.

Note that this explanation assumes that drag (air resistance) is negligible.

Answer:

The strength of the electric field is determined by the amount of charge on the source charge (Q) and the separation distance (d) from the source charge.

Explanation:

The interaction of charged objects is a non-contact force that operates over a certain separation distance. Distance, distance, distance. Every electrical contact is accompanied by a force, emphasizing the significance of these three factors. Whether it's a plastic golf tube attracting paper bits, two like-charged balloons repelling, or a charged Styrofoam plate interacting with electrons in a piece of metal, the three crucial factors that impact the strength of the interaction are always two charges and a distance between them.  The electrical force, like all other forces, is usually measured in Newtons. The electrical interaction's intensity is a vector quantity with both magnitude and direction since it is a force. The electrical force's direction is determined by whether the charged objects are charged with similar or opposing charges, as well as their spatial orientation. With a little logic and knowledge of the two objects' charge types, the direction of the force on either of them may be determined. Objects A and B in the figure below have similar charges, hence they repel each other.

Answer:

5 Muscular and strength

The altitude of the balloon at the time the sandbag was dropped is 490m.

The height of an object is the measurement taken from its bottom to its top. In geometry, it is occasionally referred to as altitude. It is calculated how far apart the lowest and highest points are vertically. It is frequently the measurement along an object's y-axis in coordinate geometry.

Sandbag dropped from height above ground = H:

H = v₀t-at²/2

= 4.2×t-gt²/2

t = 10 s

g = 9.8 m/s²

H = 4.2×10- 9.8×10²/2

H = -448 m

The height of the balloon when the sandbag was dropped = 448 m

During these 10 s the balloon ascended an additional:

4.2×10 = 42 m

So the height of the balloon when the sandbag reached the ground is:

448+42 = 490 m.

To know more about Height visit:

https://brainly.com/question/10726356

#SPJ9

Answer: C) the RICE formula

Explanation:

Particularly for the treatment of injury associated with the sprain or strain one can get relieve in pain and swelling on the damaged area by promoting flexibility and healing of that area utilizing the RICE formula. R- rest, I- Ice, C- Compression, and E- Elevation. Resting and restricting any activity can help in enhancing the healing process. The application of ice will reduce pain and swelling. The injured area can be compressed by using a tight bandage. This will also help in reducing the swelling. Keeping the injured body part at an elevation like on a pillow can also reduce the swelling.  

Speed = distance / time

Speed = (33 cm) / (2min 20sec)

Speed = (0.33 m) / (140 sec)

Speed = 0.0024 m/s

Speed = (0.0024 m/s) x (3600 sec / 1 hr) x (1 km / 1000 m)

Speed = (0.0024 x 3600 / 1000) (m-sec-km / sec-hr-m)

Speed = 0.0085 km/hr

For the time of 2 min and 20 seconds, Archie's speed in m/s will be 0.0024 m/s and Archie's speed in km/hr will be 0.0085 km/hr.

The "speed at which an object is traveling," or speed, is a scalar quantity. The speed of an object is the rate at which it moves through space. A fast-moving object covers a considerable distance in a short amount of time while traveling at a high speed. An object moving slowly, on the other hand, moves a comparatively modest distance in the same amount of time. An object with zero speed is one that is not moving at all.

According to the question, the given values are :

Distance, d = 33 inches or,

d = 33 cm

Time, t = 2 minutes 20 seconds, or,

t = 140 seconds.

Speed is the ratio of distance to time.

s = 33/140

s = 0.0024 m/s

Now the distance in km/hr will be :

s = 0.0024 m/s × 3600 sec / 1hr × 1 km/ 1000 m

s= 0.0085 km/hr

Hence, the speed in km/hr is 0.0085 km/hr and in m/s speed is 0.0024 m/s.

To get more information about Speed :

https://brainly.com/question/28224010

#SPJ2

Answer:

Using KVL (Kirchhoff's Voltage Law), we can derive the expressions for v1 and v2 in the simple circuit shown in Fig. 3.62. The law states that the sum of the voltages in a closed circuit is zero. Therefore, we can write:

v1 + vx - v2 = 0

Solving for v1 and v2, we get:

v1 = (vx × R1) / (R1 + R2)

v2 = (vx × R2) / (R1 + R2)

Why did the electricity go to jail? Because it conducted itself improperly!

Explanation:

F(force)=?

m(mass)=75kg

a(acceleration)=3

formula for F=

F=m×a

F=75×3

F=225