Taking into account about the ideal gas law, the mass of fluorine gas is 63.2244 grams.
What is ideal gas lawAn ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P×V = n×R×T
where:
P is the gas pressure.V is the volume that occupies.T is its temperature. The universal constant of ideal gases R has the same value for all gaseous substances. R is the ideal gas constant.n is the number of moles of the gas.Definition of molar massThe molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.
Mass of fluorine gasIn this case, you know:
P= 850 mmHg= 1.11842 atm (being 1 mmHg= 0.00131579 atm)V= 45.5 LT =100 °C= 373 K (being 0°C= 273 K)R= 0.082 \(\frac{atm L}{mol K}\)n= ?Replacing in the ideal gas law:
1.11842 atm ×45.5 L = n×0.082 \(\frac{atm L}{mol K}\)× 373 K
Solving:
n= (1.11842 atm ×45.5 L)÷ (0.082 \(\frac{atm L}{mol K}\)× 373 K)
n= 1.6638 moles
The molar mass of F₂ is 38 g/mole. Then you can apply the folowing rule of three: If by definition of molar mass 1 mole of the compound contains 38 grams, 1.6638 moles of the compound contains how much mass?
\(mass= \frac{1.6638 molesx38 grams}{1 mole}\)
mass= 63.2244 grams
Finally, the mass of fluorine gas is 63.2244 grams.
Learn more about
the ideal gas law:
brainly.com/question/4147359
molar mass:
brainly.com/question/5216907
brainly.com/question/11209783
brainly.com/question/7132033
brainly.com/question/17249726
#SPJ1
A tablespoon of baking powder is added to 300g of water in a sturdy bottle and the lid is sealed tightly. The reaction of baking powder produces CO2. The reaction is endothermic.
3 NaHCO3 + NaAl(SO4)2 → Al(OH)3 + 2 Na2SO4 + 3 CO2
What are 2 things you can do to produce more carbon dioxide? You can add any chemical to the bottle, increase or decrease the pressure in the bottle, or increase or decrease the temperature.
To produce more carbon dioxide in this reaction increase the temperature or add more baking powder.
How does increasing temperature and baking powder increase carbon dioxide?Add more baking powder: Adding more baking powder to the water will increase the amount of reactant available, leading to a greater production of carbon dioxide.Increase the temperature: Since the reaction is endothermic, increasing the temperature will drive the reaction to produce more carbon dioxide as the reaction absorbs heat. This is due to Le Chatelier's principle, which states that a system at equilibrium will respond to a stress in a way that counteracts that stress. In this case, the added heat will cause the reaction to shift towards the products, producing more carbon dioxide.It's worth noting that increasing the pressure in the bottle would not have a significant effect on the production of carbon dioxide, as the reaction is not affected by pressure. Decreasing the pressure would only cause the carbon dioxide to escape more quickly from the bottle.
Learn more about chemical reactions of CO₂ here:
https://brainly.com/question/1923482
#SPJ1
youngest to oldest rocks in order abcde
Rock formations change over the years and their position within the formation helps scientists and researchers determine the age of each layer. The oldest layers are at the bottom of the structure and the newest layers are at the top.
The bottom layer of rock forms first so it is the oldest layer. All layers above are younger and the top layer is the youngest of them all. This order is relative because we cannot know exactly when each layer was formed, only that each layer is younger than the layer below it. The superposition principle shows that younger rock layers lie on top of older rock layers.
Each layer is older than the layer above it. Layer D was deposited first so it is the oldest layer because it is at the bottom. Younger rock units in the order of layers C, B, and A. Sedimentary rocks are piled on top of each other. So the youngest layer is on top of the sequence and the oldest layer is on the bottom.
Learn more about The oldest rocks here:-https://brainly.com/question/14269803
#SPJ9
name four physical quantities that are conserved and two quantities that are not conserved during a process
Four physical quantities that are conserved during a process include energy, momentum, angular momentum, and electric charge. On the other hand, two quantities that are not conserved during a process are mechanical energy and mass.
Energy conservation states that the total energy of an isolated system remains constant, as energy can neither be created nor destroyed, only converted from one form to another. Momentum conservation asserts that the total momentum of a system remains constant, provided no external forces act on it. Similarly, the conservation of angular momentum dictates that the total angular momentum of an isolated system remains constant if no external torques are applied. Lastly, electric charge conservation states that the net electric charge within an isolated system remains constant, as charges can neither be created nor destroyed, only redistributed or transferred.
Mechanical energy, which comprises kinetic and potential energy, may not be conserved in non-conservative systems, such as those experiencing dissipative forces like friction or air resistance. In these cases, some mechanical energy is lost as thermal energy or other forms of energy. Mass conservation is not always maintained at the subatomic level, particularly during processes like nuclear reactions, where mass can be converted into energy following Einstein's mass-energy equivalence principle, E=mc².
Learn more about mechanical energy at:
https://brainly.com/question/28928306
#SPJ11
6x-8y=12 I need help please
I'm not sure what exactly you are looking for here, but here are some answers anyways, sorry if I do not have the one you are looking for;
X and Y intercepts -
x intercept(s): (2, 0)
y intercept(s): (0, -3/2)
Slope Intercept Form -
y = 3/4x - 3/2
Slope and Y intercept -
Slope: 3/4
y intercept: (0, -3/2)
Finding the Slope -
m = 3/4
TL;DR -
Slope - 3/4
x intercepts - (2, 0)
y intercepts - (0, -3/2)
Slope intercept form - y = 3/4x - 3/2
Did I do number one correctly???
Explanation:
yup you are right. The answer is 2,3- Dimethyl butane
does salt affect the boiling time of water?
Answer:
Yes
Explanation:
Yes, but almost insignificantly. The regular boiling point of water is 100 degrees celcius, adding a small handfull of salt will increase the boiling point to roughly 100.04 degrees celcius. Therefore, it is almost insignificant but still does affect it. This is mainly because salt changes the way the molecules react thus making it harder for them to change state from liquid to gas. This ultimately causes the water to get hotter before boiling actually occurs.
What is the name of the molecule below
Answer:
2-octene
Explanation:
the 8-carbon chain (oct); has a double bond (ene) is on the 2nd carbon (2-)
A solution contains a mixture of cl- and br- ions. can both be positivevly identified?
Yes, \(Br^{-}\) and \(Cl^{-}\) ions both can be positively identified through precipitation reaction or precipitimetry.
Through titration employing precipitation reaction or precipitimetry, these two ions can both be positively identified. When exposed to Cl- and Br- ions, AgNO3 transforms into silver halides. AgNO3 with Cl- ions precipitates white because AgCl is not particularly soluble in water, whereas AgNO3 with Br- ions precipitates cream.
A very light cream precipitate results from mixing cream and white ppt.
Both halides react as described below:
\(AgNO_{3}+ XCl\)\(= AgCl_{whiteppt.}\)
\(AgNO_{3}+ XBr\) \(= AgBr_{creamppt.}\)
Now, While AgBr does not dissolve in diluted ammonia, this AgCl precipitate does to create an Ag-diammonium ion combination. Two facts, including the fact that the ppt shade is now darker than the prior pale cream, demonstrate this. As a result of the addition of an ammonia solution, it becomes less concentrated, although some cream precipitates persist.
Second, concentrated ammonia dissolves the AgBr precipitate. AgBr precipitates dissolve when cream precipitate is filtered and concentrated ammonia is added. In solution Br- ions are confirmed by this.
\(Ag^{+}+NH_{3}\) ⇄ \((AgNH_{3} )_{2} ^{+}\)
The foregoing reaction switches in the right direction after the addition of diluted ammonia solution, and more and more Ag+ ions are complexed, producing the soluble form of Ag-diammonium complex.
Brown globules are produced when CHCl3 is added to the mixture and agitated.
Learn more about ions here:
https://brainly.com/question/269828
#SPJ4
A cold recovers a pink balloon filled with 2. 30 L of helium at an amusement park outside in the hot St. Louis summer air. What can you predict what will happen to that balloon when it is brought into the salt conditioned car as the child rides home
When the cold balloon filled with 2.30 L of helium is brought into the salt-conditioned car, the balloon is likely to shrink or decrease in size.
The volume of a gas is directly affected by temperature. When the cold balloon filled with helium is brought into a salt-conditioned car, the temperature inside the car is likely to be lower than the temperature outside. As a result, the temperature of the helium gas inside the balloon will decrease. According to Charles's Law, the volume of a gas decreases with a decrease in temperature, assuming constant pressure. Therefore, the helium gas inside the balloon will contract, causing the balloon to shrink or decrease in size.
Thus, the balloon will shrink or decrease in size when brought into the salt-conditioned car.
You can learn more about helium at
https://brainly.com/question/29392730
#SPJ11
Which is a source of noise pollution?
Answer:
Noise pollution can come from outdoor sources, such as road traffic, jet planes, garbage trucks, construction equipment, manufacturing process- es, lawn mowers, leaf blowers, and indoor sources, including: boom boxes, heating and air conditioning units, and metal chairs scraping on floors. in a quiet environment.
Answer:
road traffic, jet planes, garbage trucks, construction equipment, manufacturing process- es, lawn mowers, leaf blowers
It takes 25 mL of 0.20 M of hydrochloric acid (HCI) to neutralize 50 mL of
sodium hydroxide (NaOH). What is the concentration of sodium
hydroxide?
Answer:
0.1 M
Explanation:
(25 mL) (0.20 M) / 50 mL = 0.1 M
All three states of matter can be ____________ or a solvent in a solution.
HELPPPPPPPPPPPPP ME PLSSSSSSSSSSS
This image shows a model of the rock cycle.
At point R, rocks melt underground to form magma. Which is another process that contributes to the formation of rock at point R?
compacting of sediments on the mountain
cooling as the lava runs down the mountain
weathering of the mountain from the environment
eroding of different rocks at the base of the mountain
Answer:
Option B: cooling as the lava runs down the mountain
Explanation:
The point R is basically at near the Earth's surface.
Now, we are told that rocks melt underground to form magma. This is a process of formation of igneous rocks. So, in formation of igneous rocks another process that will contribute to formation of rocks at point R is named cooling.
Cooling is a process where the larva runs down the mountain that makes magma hardened and makes it it turn into igneous rock.
Answer:
The answer is cooling as the lava runs down the mountain.
Explanation:
I took the test on Edge 2020 and got the answer right.
what simple machine would be best for lifting a couch through a 3rd floor apartment window?
Answer:
Pully
Explanation:
I would think that a pully would be most effective for lifting it Up and into the apartment (at least if you have a suitable spot to put the pully)
Lundstrom Company began making sales on credit during 20X1. The company used the direct write-off method for uncollectible accounts. A material amount of uncollectible accounts resulting from sales made during 20X1 were written off during 20X2. What was the effect of this write-off on net income for 20X1 and 20X2, respectively
The direct write-off method is a method of accounting for uncollectible accounts receivable where a company records the bad debt expense when it is deemed uncollectible and is written off from the accounts receivable. Since Lundstrom Company used the direct write-off method for uncollectible accounts, any uncollectible accounts resulting from sales made during 20X1 would not have been recorded in the 20X1 financial statements.
Therefore, the write-off of the uncollectible accounts during 20X2 would have no effect on the net income for 20X1. However, the write-off of the uncollectible accounts during 20X2 would have a negative effect on the net income for 20X2. This is because the write-off of the uncollectible accounts would result in a decrease in the accounts receivable balance and an increase in the bad debt expense. This increase in the bad debt expense would decrease the net income for 20X2. In summary, the write-off of the uncollectible accounts resulting from sales made during 20X1 would have no effect on the net income for 20X1 but would have a negative effect on the net income for 20X2.
Learn more about bad debt here-
https://brainly.com/question/18721587
#SPJ11
50 POINTS! I NEED HELP ASAP PLEASE WILL MAKR BRAINLIEST
Jackson noticed that the music from his cell phone sounds louder when laid on his desk than when he held it up in the air. Which of the following explains the difference in sound that Jackson is experiencing?
Sound waves move faster through air because the molecules are further apart.
Sound waves move faster through solids because the molecules are further apart.
Sound waves move faster through air because the molecules are closely packed together.
Sound waves move faster through solids because the molecules are closely packed together.
Jackson noticed that the music from his cell phone sounds louder when laid on his desk than when he held it up in the air. Sound waves move faster through solids because the molecules are closely packed together. Therefore, option D is correct.
What is sound wave ?When energy moves through a medium and propagates away from the sound source, it creates a pattern of disruption known as a sound wave. Pressure waves are generated by the vibration of objects and are known as sound waves.
When energy forces air molecules to shift in and out of one another, sound is produced. The sound's amplitude increases as the particles approach closer or farther apart. A sound's volume and intensity are determined by its amplitude. The sound gets louder and more intense the larger the amplitude.
The results of the testing demonstrated that Solid was the best medium out of the three for sound to travel loudest. The liquid medium came in second. The least effective medium was air.
Thus, option D is correct.
To learn more about sound wave, follow the link;
https://brainly.com/question/21995826
#SPJ1
Which of the following would cause the seasons on Earth to change more gradually?
A Increasing the amount of time it takes Earth to orbit the Sun.
B Increasing the number of times Earth rotates on its axis per year.
C Decreasing the speed of the Moon’s orbit around Earth.
D Decreasing the amount of energy the Sun emits per year.
Answer: The four seasons happen because of the tilt of the Earth's axis. At different times of the year, the sun's rays hit different parts of the globe more directly. The angle of the Earth's axis tilts the Northern Hemisphere towards the sun during the summer.
Explanation: I am not gonna tell u what exactly to pick but this should give an idea okai? Hope I can help u :)
Answer:
so whats the answer?
Explanation:
hola amigos quiero hablar solo con chicos
Answer:
Ingles?
Explanation:
Time such as minutes, days, and months will always
be a(n) ___
variable when
graphing.
Controlled
Independent
Dependent
Extraneous
1
Which is true for a substance that absorbs energy?
A The energy increases the molecular motion and the kinetic energy of the substance.
B The energy decreases the molecular motion but increases the kinetic energy of the substance.
C The energy decreases the molecular motion and the kinetic energy of the substance.
D The energy increases the molecular motion but decreases the kinetic energy of the substance.
Reset
Next
Answer:
A. The energy increases the molecular motion and the kinetic energy of the substance.
Explanation:
When a substance absorbs energy, the molecules will move faster because there will be more vibrations and collisions.
As a result of more molecular motion, the kinetic energy will increase because there is more movement.
why do different people have differently shaped proteins?
The sequence of amino acids in the chain determines how the chain will fold up to make the protein, so different proteins have different three-dimensional shapes. ... This is because proteins form attachments and interact with many other molecules and structures inside organisms.
are radicals charged or neutral
Answer:
Ions have a charge, whereas radical are neutral
Also, ions in nature tend to be compensated by ions with opposite charges, whereas radicals are very reactive and thus short lived.
Explanation:
have a good
thank me later
carryonlearing
✨ jufaith ✨
Answer:
neutral
Explanation:
you can get answer from web as well
What are two examples of mechanical waves?
• Radio
• Water
• Light
•Sound
Answer:
radio and sound
Explanation:
Because they are waves in motion
for each compound write a complete reaction equation showing the removal of the atoms that become the water molecule
Carboxylic group (-COOH) converts into ester (−COCH3) during the reaction of salicylic acid with methanol so, reaction is known as esterification.
The product methyl 2− hydroxyl benzoate is known as the oil of wintergreen. Oil of wintergreen is naturally produced organic ester.
1) Methyl salicylate (oil of wintergreen)
Salicylic acid and methanol undergo esterification reaction in presence of acid catalyst to give methyl salicylate and water.
Salicylic acid is odorless and white Solid Methanol is colourless volatile liquid having pungent odour or smell. Methyl salicylate is colourless liquid having sweet and fruity smell
learn more about esterification reaction at https://brainly.com/question/13018690
#SPJ4
Sulfur dioxide is released when fossil fuels burn. What does sulfur dioxide cause? ASAP PLZ
Answer:
acid rain
Explanation:
When sulfur dioxide combines with water and air, it forms sulfuric acid, which is the main component of acid rain. Acid rain can: cause deforestation.
Can someone help me with this i don't understand it.
Answer:
The subscript next to the letter "C" will always tell you the number of carbon atoms.
How many moles are in 24.3g of iron (II) oxide?
Mark me Brainliest..... ......
Why does the water follow solutes
How do nonpolar molecules dissolve in nonpolar solvents? (How do they bond together)
Answer:
Nonpolar molecules dissolve in nonpolar solvents through a process called dispersion forces or London forces.
In nonpolar molecules, the electrons are evenly distributed and there is no permanent dipole moment, which means that the molecule has no positive or negative poles. When nonpolar molecules are added to a nonpolar solvent, such as oil or hexane, the molecules are attracted to one another due to London dispersion forces.
London forces are due to temporary fluctuations in electron density within molecules, creating temporary dipoles. These temporary dipoles induce corresponding temporary dipoles in other nearby molecules, attracting them to each other. The strength of the London dispersion forces increases with the size of the molecule, since larger molecules have more electrons and a greater potential for temporary dipoles.
In general, nonpolar molecules bind together in nonpolar solvents through these weak intermolecular forces, allowing them to dissolve and form a homogeneous solution.
Explanation:
each student in a class placed a 2.00 g sample of a mixture of cu and al in a beaker and placed the beaker in a fume hood. the students slowly poured 15.0 ml of 15.8 m hno3(aq) into their beakers. the reaction between the copper in the mixture and the hno3(aq) is represented by the equation above. the students observed that a brown gas was released from the beakers and that the solutions turned blue, indicating the formation of cu2 (aq). the solutions were then diluted with distilled water to known volumes. question the students determined that the reaction produced 0.010 mol of cu(no3)2 . based on the measurement, what was the percent of cu by mass in the original 2.00 g sample of the mixture?
Copper mass percentage in the sample = 32%, Nitrogen dioxide is a gas generated by several metal-acid interactions that has some intriguing health consequences.
Nitrogen dioxide is a hazardous dark gas that causes respiratory issues. It is frequently created by high-temperature combustion in automobile engines. During rush hour in several cities in the 1970s, this pollution would pile up, causing public health problems.
As a result, several nations began implementing regulations requiring the installation of catalytic converters on automotive exhaust systems, which break down nitrogen dioxide into atmospheric nitrogen and oxygen.
Equation of the reaction producing Cu(NO₃) is given below:
Cu(s)+ 4HNO₃(aq) ---> Cu(NO₃)(aq) + 2NO₂(g) + 2H₂O(l)
From the equation of reaction, 1 mole of Cu(NO₃) is produced from 1 mole of copper. Therefore, 0.010 moles of Cu(NO₃) will be produced from 0.010 mole of copper.
Molar mass of copper = 64 g/mol
mass of copper = number of moles * molar mass
mass of copper = 0.01 mol * 64 g/mol = 0.64 g
Percentage by mass of copper in the 2.00 g sample = (0.64/2.00) * 100%
Percentage mass of copper in the sample = 32%
Learn more about Nitrogen dioxide
https://brainly.com/question/6840767
#SPJ4
Full Question ;
Each student in a class placed a 2.00-gram sample of a mixture of Cu and Al in a beaker and placed the beaker in a fume hood. The students slowly poured 15.0 mL of 15.8 M HNO3
(aq) into their beakers. The reaction between copper in the mixture and HNO3 is depicted above.
The students observed that a brown gas was released from the beakers and that solutions turned blue, indicating the formation of Cu2+. The solutions were then diluted with distilled water to known volumes. The students determined that the reaction produced 0.010 moles of Cu(NO3)2
. Based on the measurement, what was the percent of Cu by mass in the original 2.00-gram sample of the mixture?
A) 16%
B) 32%
C) 64%
D) 96%