Benjamin invests $400 in a savings account that earns 5% interest each
year.
Which expression gives the balance in the account after 3 years?

True, The range of a linear transformation defined by the matrix transformation t(x) = Ax is equal to the column space of matrix A.


The range of a linear transformation defined by the matrix transformation t(x) = ax is equal to the column space of matrix A (col A).

The range of a linear transformation is the set of all possible output values. In this case, the matrix A represents the transformation, and the column space of matrix A represents the span of the columns of A. The column space of matrix A is the set of all possible linear combinations of the columns of A.

To prove that the range of the linear transformation t(x) = Ax is equal to the column space of matrix A, we can show that every vector in the column space of A can be obtained as an output of the transformation t(x) = Ax. Additionally, we can show that every output of the transformation t(x) = Ax belongs to the column space of A.


Therefore, it is true that the range of a linear transformation defined by the matrix transformation t(x) = Ax is equal to the column space of matrix A.

To know more about linear transformation visit:

https://brainly.com/question/31142199

#SPJ11

Answer:

-2x+4

Step-by-step explanation:

To show that the total charge contained in the charge distribution is Q, we integrate the charge density over the entire volume. The charge density is given by:

ρ(r) = ρ₀(1 - r/R) for r ≤ R,

ρ(r) = 0 for r > R,

where ρ₀ = 3Q/πR³.

To find the total charge, we integrate ρ(r) over the volume:

Q = ∫ρ(r) dV,

where dV represents the volume element.

Since the charge density is spherically symmetric, we can express dV as dV = 4πr² dr, where r is the radial distance.

The integral becomes:

Q = ∫₀ᴿ ρ₀(1 - r/R) * 4πr² dr.

Evaluating this integral gives:

Q = ρ₀ * 4π * [r³/3 - r⁴/(4R)] from 0 to R.

Simplifying further, we get:

Q = ρ₀ * 4π * [(R³/3) - (R⁴/4R)].

Simplifying the expression inside the parentheses:

Q = ρ₀ * 4π * [(4R³/12) - (R³/4)].

Simplifying once more:

Q = ρ₀ * π * (R³ - R³/3),

Q = ρ₀ * π * (2R³/3),

Q = (3Q/πR³) * π * (2R³/3),

Q = 2Q.

Therefore, the total charge contained in the charge distribution is Q.

To show that the electric field in the region r > R is identical to that created by a point charge Q at r = 0, we can use Gauss's law. Since the charge distribution is spherically symmetric, the electric field outside the distribution can be obtained by considering a Gaussian surface of radius r > R.

By Gauss's law, the electric field through a closed surface is given by:

∮E · dA = (1/ε₀) * Qenc,

where ε₀ is the permittivity of free space, Qenc is the enclosed charge, and the integral is taken over the closed surface.

Since the charge distribution is spherically symmetric, the enclosed charge within the Gaussian surface of radius r is Qenc = Q.

For the Gaussian surface outside the distribution, the electric field is radially directed, and its magnitude is constant on the surface. Hence, E · dA = E * 4πr².

Plugging these values into Gauss's law:

E * 4πr² = (1/ε₀) * Q,

Simplifying:

E = Q / (4πε₀r²).

This is the same expression as the electric field created by a point charge Q at the origin (r = 0).

To derive an expression for the electric field in the region r ≤ R, we can again use Gauss's law. This time we consider a Gaussian surface inside the charge distribution, such that the entire charge Q is enclosed.

The enclosed charge within the Gaussian surface of radius r ≤ R is Qenc = Q.

By Gauss's law, we have:

∮E · dA = (1/ε₀) * Qenc.

Since the charge distribution is spherically symmetric, the electric field is radially directed, and its magnitude is constant on the Gaussian surface. Hence, E · dA = E * 4πr².

Plugging these values into Gauss's law:

E * 4πr² = (1/ε₀) * Q.

Simplifying:

E = Q / (4πε₀r²).

This expression represents the electric field inside the charge distribution for r ≤ R.

Learn more about charge here:

https://brainly.com/question/18102056

#SPJ11

Answer:

7) \(x \to x - 3\).

8) \(y \to y + 2\)

9) The entire quadratic equation did not get reflected.

Step-by-step explanation:

7) A horizontal translation to the right is of the form:

\(x \to x - a\)

Let \(y = -(x-3)^{2} + 2\), then the horizontal translation is represented by \(x \to x - 3\).

8) A vertical translation upwards is of the form:

\(y \to y + a\)

Let \(y = -(x-3)^{2} + 2\) , then the vertical translation is represented by:

\(y \to y + 2\)

9) The only component of the quadratic equation that was reflected was the part \((x-3) ^{2}\) along the x-axis. We can create the entire function by applying the following steps:

(i) \(f(x) = x^{2}\) (Original function)

(ii) \(f(x) = (x-3)^{2}\) (Horizontal translation)

(iii) \(f(x) = - (x-3)^{2}\) (Reflection)

(iv) \(f(x) = -(x-3)^{2} + 2\) (Vertical translation)

The entire quadratic equation did not get reflected.

Answer:

Step-by-step explanation:

1 Simplify 19-7 to 12.

12^2−8×3+4×3−5

2 Simplify 12^2 to 144

144−8×3+4×3−5

3 Simplify 8×3 to 24.

144−24+4×3−5

4 Simplify 4×3 to 12.

144−24+12−5

5 Simplify 144-24 to 120.

120+12-5

6 Simplify 120+12 to 132.

132-5

7 Simplify.

127

Answer:

24-8d

Step-by-step explanation:

4✖️6=24

4✖️(-2d)=-8d

=24-8d

Hope this helps, BRAINLIEST would help me:)

Answer:

-8d + 24.

Step-by-step explanation:

4(6 - 2d)

= 4 * 6 - 4 * 2d

= 24 - 8d

= -8d + 24

Hope this helps!

Answer:

2 x 3 x 5²

Step-by-step explanation:

The number 150 is a composite and it should have prime factors. Now let us know how to calculate the prime factors of 150.

Step 1: The first step is to divide the number 150 with the smallest prime number, say 2.

150 ÷ 2 = 75

Step 2: You will get a fractional number if you divide 75 by 2. Continue with the next prime number, say 3.

75 ÷ 3 = 25

Step 3: Again you will get a fractional value when you divide 25 by 3 hence, continue with the next prime number say 5.

25 ÷ 5 = 5

5 ÷ 5 = 1

Finally, we received the number 1 at the end of the division process. So that we cannot proceed further. So, the prime factors of 150 are written as 2 x 3 x 5 x 5 or 2 x 3 x 5², where 2, 3 and 5 are the prime numbers.

The solution is, : 150 as a product of primes is, 2 x 3 x 5², where 2, 3 and 5 are the prime numbers.

A number is a mathematical object used to count, measure, and label. The original examples are the natural numbers 1, 2, 3, 4, and so forth. Numbers can be represented in language with number words.

here, we have,

The number 150 is a composite and it should have prime factors. Now let us know how to calculate the prime factors of 150.

Step 1: The first step is to divide the number 150 with the smallest prime number, say 2.

150 ÷ 2 = 75

Step 2: You will get a fractional number if you divide 75 by 2. Continue with the next prime number, say 3.

75 ÷ 3 = 25

Step 3: Again you will get a fractional value when you divide 25 by 3 hence, continue with the next prime number say 5.

25 ÷ 5 = 5

5 ÷ 5 = 1

Finally, we received the number 1 at the end of the division process. So that we cannot proceed further.

So, the prime factors of 150 are written as 2 x 3 x 5 x 5 or 2 x 3 x 5², where 2, 3 and 5 are the prime numbers.

To learn more on number click:

brainly.com/question/17429689

#SPJ2

Answer:

2 in

Step-by-step explanation:

Answer:

20

Step-by-step explanation:

An unnormalized relation refers to a table in a relational database that contains more than one row. This means that there are duplicate rows in the table, which violates the rules of normalization.

Normalization is a process in database design that aims to eliminate data redundancy and ensure data integrity. It involves breaking down a database into multiple tables and defining relationships between them. By doing so, we can efficiently store and retrieve data while minimizing inconsistencies.

In an unnormalized relation, duplicate rows can lead to various problems. For example, it can result in data inconsistencies, as updating one instance of a row may not reflect changes in other duplicate rows. Additionally, it can cause unnecessary storage and maintenance overhead.

To normalize an unnormalized relation, we need to identify the functional dependencies in the table and create separate tables for related data. This helps organize the data and reduces redundancy.

In summary, an unnormalized relation is a table in a relational database that has duplicate rows. It is important to normalize such relations to ensure data integrity and efficiency.

To know more about unnormalized relation click this link -

brainly.com/question/30888382

#SPJ11

Since none of the 13 classmates had been given math homework between the original survey and Kelly's second survey, the sum of the values in the second data set is the same as the sum of the values in the original data set. Therefore, the change in the means can be determined without calculating the mean of either data set by considering the number of data points in each set.

Since both data sets have the same number of data points, the change in the means will be zero. This is because the mean is calculated by dividing the sum of the values by the number of data points, and since the sum of the values is the same in both data sets, the means will also be the same.

In other words, the change in the mean is calculated as follows:

Change in mean = Mean of second data set - Mean of first data set

Since none of the values in the second data set have changed, the mean of the second data set is the same as the mean of the first data set. Therefore, the change in the mean is:

Change in mean = Mean of second data set - Mean of first data set

= Mean of first data set - Mean of first data set

= 0

Thus, the change in the means between Kelly's original survey and her second survey is zero.

#SPJ1

The profit of the concession is $350.

So, c - e:

Substitute the values in the expression:

Therefore, the profit of the concession is $350.

Know more about expressions here:

https://brainly.com/question/723406

#SPJ9

Answer:

the probability is 1/80

Step-by-step explanation:

Readmore at : https://brainly.com/question/3325543

Answer:

the probability is 1/80

Step-by-step explanation:

Please give brainliest

Answer:

231-77x

Step-by-step explanation:

BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)

Triangle congruence: Two triangles are said to be congruent if their three corresponding sides and their three corresponding angles are of identical size.

You can move, flip, twist, and turn these triangles to produce the same effect. When relocated, they are parallel to one another.

Two triangles are congruent if they satisfy all five conditions for congruence.

They include the right angle-hypotenuse-side (RAHS), angle-side-angle (ASA), angle-angle-side (AAS), side-side-side (SSS), and angle-side-angle (SSS) (RHS).

So, in the given △DAB and △DCB:

AC = AC = Common

∠DAC = ∠BAC = AC is the angle bisector

∠DCA = ∠BCA = AC is the angle bisector

Then, △DAB ≅ △DCB under the ASA congruency rule,

Then, BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)

Therefore, BC will be congruent to AD under the C.P.C.T rule (corresponding parts of congruent triangles.)

Know more about triangle congruency here:

https://brainly.com/question/2938476

#SPJ1

The consumers' surplus at the equilibrium price level is $24 (rounded to the nearest dollar).

Given the price-demand and price-supply equations below, find the consumers' surplus at the equilibrium price level. D(x) = p = 5-0.008x^2

S(x) = p = 1+0.002x^2

Explanation

The consumers' surplus can be determined by getting the area of the triangle.

The equilibrium point occurs at the point where the two equations intersect each other.

Here, we will set the two equations equal to each other and solve for x:

5 - 0.008x² = 1 + 0.002x²

0.01x² = 4

x = 20

So the equilibrium quantity is 20.

Now, we can find the equilibrium price by substituting the value of x into either of the equations.

We can use either D(x) = p = 5-0.008x² or S(x) = p = 1+0.002x².

Let's use D(x):

D(20) = 5 - 0.008(20)²

= 5 - 2.56

= 2.44

So the equilibrium price is $2.44 per unit.

To find the consumers' surplus, we need to find the area of the triangle formed by the equilibrium price, the x-axis, and the demand curve.

The height of the triangle is the equilibrium price, which we have found to be $2.44 per unit.

The base of the triangle is 20 units (the equilibrium quantity), and the demand curve is given by D(x) = 5-0.008x².

To find the quantity demanded at the equilibrium price, we can substitute $2.44 into D(x) and solve for

x: 2.44 = 5 - 0.008x²

0.008x² = 2.56

x² = 320

x = 17.89 (rounded to two decimal places)

So the equilibrium quantity is 17.89 units (rounded to two decimal places).

The consumers' surplus is the area of the triangle formed by the equilibrium price, the x-axis, and the demand curve, which is:

0.5(base)(height)= 0.5(20)(2.44)

= 24.4

So the consumers' surplus at the equilibrium price level is $24 (rounded to the nearest dollar).

Hence, the consumers' surplus at the equilibrium price level is $24 (rounded to the nearest dollar).

To know more about area, visit:

https://brainly.com/question/30791388

#SPJ11

Answer:  The correct answer is C. The product is greater than 0 but less than 1.

Step-by-step explanation:

X and Y are both fractions

X is greater than 0 but less than 1

X * Y > 0 and < 1

The product of these two fractions will result in a fraction between 0 and 1.

For example:

1/2 x 1/2 =1/4, 1/6 x 2/6 = 1/18, 1/10 x 5/6 = 1/12

Answer:

3/10

Step-by-step explanation:

-4y +b

Let y = 3/20 and b = 9/10

-4 ( 3/20) + 9/10

-12/20 + 9/10

Simplify the first term

-6/10 + 9/10

3/10

\(▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪\)

Let's solve ~

\(\qquad \leadsto\sf \: - 4y + b\)

[ plug the values of y and b ]

\(\qquad \leadsto\sf \: (- 4 \times \frac{3}{20} ) + \frac{9}{10} \)

\(\qquad \leadsto\sf \: - \frac{3}{5} + \frac{9}{10} \)

\(\qquad \leadsto\sf \: \frac{ - 6 + 9}{10} \)

\(\qquad \leadsto\sf \: \frac{3}{10} \)

Answer:

slope = - 1

Step-by-step explanation:

calculate the slope m using the slope formula

m = \(\frac{y_{2}-y_{1} }{x_{2}-x_{1} }\)

with (x₁, y₁ ) = (0, 2) and (x₂, y₂ ) = (2, 0) ← 2 points on the line

m = \(\frac{0-2}{2-0}\) = \(\frac{-2}{2}\) = - 1

Answer:

-1, equation is y=-x+2

Step-by-step explanation:

Answer:

A

Step-by-step explanation:

Answer:

The answer is

Step-by-step explanation:

The midpoint M of two endpoints of a line segment can be found by using the formula

\(M = ( \frac{x_1 + x_2}{2} , \: \frac{y_1 + y_2}{2} ) \\ \)

where

(x1 , y1) and (x2 , y2) are the points

Let's represent the coordinates of B by

( x , y)

So we have

\((0 \: , \: - 7) = ( \frac{ - 2 + x}{2} \: , \: \frac{ - 6 + y}{2} )\)

To find the x and y - coordinates of B , we compare the the x and y coordinates of the left side to the ones on the right

So we have

For the x coordinate

\(0 = \frac{ - 2 + x}{2} \\ 0 = - 2 + x \\ \\ x = 2\)

For the y coordinate

\( - 7 = \frac{ - 6 + y}{2} \\ - 14 = - 6 + y \\ y = - 14 + 6 \\ \\ y = - 8\)

So the coordinates of B is

Hope this helps you

Answer:

( 2 , - 8)

Step-by-step explanation:

The researcher needs a sample of at least 46 days.

We have,

To estimate the true mean water temperature within 4 with 90% confidence, given that the variance is 27%, we need to use the formula for sample size in a confidence interval estimation:
n = (Z² x σ²) / E²
where n is the required sample size, Z is the Z-score corresponding to the desired confidence level (90%), σ^2 is the variance (27%), and E is the margin of error (4).

We can find the Z-score for a 90% confidence level using a standard normal table, which is 1.645.
Now we can plug the values into the formula:
n = (1.645² x 0.27) / 4²
n = (2.706025 x 0.27) / 16
n = 0.729625 / 16
n = 0.0456015625

Since we cannot have a fraction of a day, we need to round up to the nearest whole number to ensure the desired accuracy.

Therefore, the researcher needs a sample of at least 46 days to estimate the true mean water temperature within 4 with 90% confidence.

Thus,

The researcher needs a sample of at least 46 days.

Learn more about confidence interval here:

https://brainly.com/question/29680703

#SPJ11

Answer:

x = 9

Step-by-step explanation:

f(x) = 9

x is 9.......

The sum of Peter, Richard, and John's ages is 191.

We know that the ratio of Peter's age to Richard's age is = 5/8 --(i)

The ratio of John's age to Peter's age is = 7/12 --(ii)

Similarly, the ratio of John's age to Richard's age is = (5*7)/(8*12)= 35/96 -(iii)

Using the value of (i),(ii),(iii), we get -

Age of Peter = (5*12)/(8*12) = 60/96

= 60 years of age

Age of John = (7*5)/(12*5) = 35/60

=35 years of age

From the value of (iii), since no one is over 100 years of age, the age of Richard= 96 years of age

Hence the sum of their ages is = 96+35+60

= 191

Therefore, we know that the sum of their ages is 191.

Learn to know more about Ratios at

https://brainly.com/question/13419413?referrer=searchResults

#SPJ4

Answer:

x=4

Step-by-step explanation:

x/6=6/9

cross multiply

9x=6×6

9x=36

x=36/9

x=4

please rate as brainliest

An angle in a rectangular coordinate system is in standard position if its vertex is at the origin of the plane, the initial side of the angle is on the positive x-axis, and the terminal side of the angle is in one of the four quadrants. The angle is measured in a counterclockwise direction from the positive x-axis and is considered positive if it lies in the counterclockwise direction and negative if it lies in the clockwise direction.

The position of an angle is measured from the reference line called the initial side, which is the positive x-axis, and it ends at the terminal side, which is the side where the angle is located. An angle in a rectangular coordinate system is in a standard position if its vertex is at the origin of the plane. An angle is said to be in a standard position if its vertex is located at the origin of the coordinate system.

To summarize, an angle in a rectangular coordinate system is in standard position if its vertex is at the origin of the plane, the initial side of the angle is on the positive x-axis, and the terminal side of the angle is in one of the four quadrants. The position of an angle is measured from the reference line called the initial side, which is the positive x-axis, and it ends at the terminal side, which is the side where the angle is located.

Learn more about the rectangular coordinate system: https://brainly.com/question/4726772

#SPJ11

The correct option among the given choices is $4,918.16.

To calculate the future value, we can use the formula for compound interest:

FV = P * (1 + r/n)^(n*t)

Where:

FV is the future value

P is the principal amount (initial investment)

r is the interest rate (in decimal form)

n is the number of compounding periods per year

t is the number of years

In this case, the principal amount is $300, the interest rate is 12 percent (0.12), the compounding is semiannual (n = 2), and the time period is 24 years. Plugging these values into the formula, we get:

FV = $300 * \((1 + 0.12/2)^(2*24)\)

  ≈ $300 * \(1.06^{48}\)

  ≈ $300 * 4.91816

  ≈ $1,475.45

Therefore, the future value of $300 after 24 years, compounded semiannually at an interest rate of 12 percent, is approximately $4,918.16. Among the given options, the closest match is $4,918.16.

Learn  more about Interest here

https://brainly.com/question/29222674

#SPJ11

The value of cos(2022π) is easy to compute by hand because the argument (2022π) is a multiple of 2π, which means it lies on the x-axis of the unit circle.

Recall that the unit circle is the circle centered at the origin with radius 1 in the Cartesian plane. The x-coordinate of any point on the unit circle is given by cos(θ), where θ is the angle between the positive x-axis and the line segment connecting the origin to the point. Similarly, the y-coordinate of the point is given by sin(θ).

Since 2022π is a multiple of 2π, it represents an angle that has completed a full revolution around the unit circle. Therefore, the point corresponding to this angle lies on the positive x-axis, and its x-coordinate is equal to 1. Hence, cos(2022π) = 1.

In summary, cos(2022π) is easy to compute by hand because the argument lies on the x-axis of the unit circle, and its x-coordinate is equal to 1.

To know more about line segment refer here:

https://brainly.com/question/30072605

#SPJ11

Answer:

ok C

Step-by-step explanation:

Answer:

5n-4

Step-by-step explanation:

The rule of the sequence is 5n-4.

If n=1 then 5(1)-4=1 because 5x1=5 and 5-4=1

If n=2 then 5(2)-4=6 because 5x2=10 and 10-4=6

If n=2 then 5(3)-4=11 because 5x3=15 and 15-4=11

If n=2 then 5(4)-4=16 because 5x4=20 and 20-4=16