After feathering an engine in flight, how is the propeller of a single acting type being unfeathered?A) By use of oil pressure stored in a hydraulic accumulator.B) With oil pressure from the CSU booster pump.C) With oil pressure generated by an electrically driven pump, with its ownoil supply.D) By the action of the spring in the propeller actuator
Answers
After feathering an engine in flight, the propeller of a single acting type is unfeathered using oil pressure stored in a hydraulic accumulator. So, the correct is A.
What's hydraulic accumulator?This accumulator holds the necessary pressure to move the propeller blades back to their normal operating position. The process ensures a smooth transition and allows for the restoration of normal engine operation.
Other options, like oil pressure from the CSU booster pump (B), oil pressure generated by an electrically driven pump with its own oil supply (C), or the action of the spring in the propeller actuator (D), are not the primary methods used for unfeathering a single acting propeller in flight.
Learn more about hydraulic accumulator at
https://brainly.com/question/30127119
#SPJ11
Related Questions
Select the correct answer. The most frequent maintenance task for a car is: A. Oil changes B. Tire replacements C. Coolant changes D. Brake replacements
Answers
Answer:
A. Oil changes
Explanation:
It depends on the car and its usage and environment. Usually oil is supposed to be changed every few months, more often if the car is driven a lot. Coolant changes may be indicated as seasons change, so will generally occur less frequently than oil changes.
Tire and brake replacement depend on usage and driving habits. Some owners may never have to replace either one, if they trade their car every year or two. Folks who drive with their foot on the brake pedal may have to replace brakes relatively often.
The most frequent task is generally oil changes.
Answer:
A. Oil changesthe most frequent maintenance task for a car2.14 LAB: Using math functions
Given three floating-point numbers x, y, and z, output the square root of x, the absolute value of (y minus z) , and the factorial of (the ceiling of z).
Output each floating-point value with two digits after the decimal point, which can be achieved as follows:
print('%0.2f %0.2f %0.2f' % (your_value1, your_value2, your_value3))
Ex: If the input is:
5.0
6.5
3.2
Then the output is:
2.24 3.30 24.00
Answers
Answer:
In Java:
import java.util.Scanner;
import java.lang.Math;
public class MyClass {
public static void main(String args[]) {
Scanner input = new Scanner(System.in);
float x, y, z;
System.out.print("Enter three numbers: ");
x = input.nextFloat(); y = input.nextFloat(); z = input.nextFloat();
System.out.print("Square root of x: ");
System.out.printf("%.2f",Math.sqrt(x));
System.out.println();
System.out.print("Absolute of y - z: ");
System.out.printf("%.2f",Math.abs(y - z));
System.out.println();
int fact = 1;
for(int i = 1;i<=(int)Math.ceil(z);i++){
fact*=i;
}
System.out.print("Factorial of z: "+fact);
}
}
Explanation:
This line declares x, y and z as float
float x, y, z;
This line prompts user for three numbers
System.out.print("Enter three numbers: ");
The next line get input for x, y and z
x = input.nextFloat(); y = input.nextFloat(); z = input.nextFloat();
The italicized prints the square root of x rounded to 2 decimal places
System.out.print("Square root of x: ");
System.out.printf("%.2f",Math.sqrt(x));
System.out.println();
The italicized prints the absolute of y - z to 2 decimal places
System.out.print("Absolute of y - z: ");
System.out.printf("%.2f",Math.abs(y - z));
System.out.println();
This initializes fact to 1
int fact = 1;
The following iteration calculates the factorial of ceil z
for(int i = 1;i<=(int)Math.ceil(z);i++){
fact*=i;
}
This prints the calculated factorial
System.out.print("Factorial of z: "+fact);
}
}
g you are asked to develop a welding procedure for 4140 sheet that has previously been heat-treated to a tempered tmp1 condition. obviously, you would like to ensure that the properties of the weld nugget are nominally equivalent to the base material. would you recommend a liquid-based welding approach (e.g., tungsten inert gas welding) or a solid-state welding approach (e.g., friction stir welding)? justify your answer by considering what would happen to the microstructure of the material, and consequently the properties, using both welding approaches. does your answer depend upon the size and geometry of the part? if so, explain.
Answers
I recommend a solid-state welding approach, specifically friction stir welding, for 4140 sheet in a tempered TMP1 condition.
In liquid-based welding (e.g., Tungsten Inert Gas Welding), the material is melted and then solidified, potentially causing changes to the microstructure and affecting the properties of the heat-treated 4140 sheet. On the other hand, solid-state welding (e.g., Friction Stir Welding) involves no melting, and therefore preserves the original microstructure, maintaining the properties of the base material.
The choice between the two welding methods may depend on the size and geometry of the part. Larger or more complex parts may require alternative approaches to ensure proper welding and minimal distortion. Overall, considering the microstructure and properties of the material, friction stir welding is the more suitable option for a heat-treated 4140 sheet.
To know more about solid-state welding visit:
brainly.com/question/31414873
#SPJ11
What is the single variable here? Provide additional informative comments. (Hint: for additional information be focus on microstructure, %C ormation be focus on microstructure. %Carbon contain and microstructure with most and least hardness value with supportive comments) (b) 219 DPH (a) 585 DPH 185 DPH (c) 210 DPH
Answers
The single variable here is the hardness value, which is represented by the DPH (Diamond Pyramid Hardness) numbers: 585 DPH, 219 DPH, 185 DPH, and 210 DPH.
The hardness value of a material depends on several factors, including the microstructure and the percentage of carbon present in the material. The higher the carbon content, the harder the material becomes. The microstructure of a material also affects its hardness. For example, a material with a fine-grained microstructure tends to be harder than a material with a coarse-grained microstructure.
In this case, the material with the highest hardness value is 585 DPH, while the material with the lowest hardness value is 185 DPH. Without additional information, it is difficult to determine the exact percentage of carbon and microstructure of each material.
However, we can assume that the material with the highest hardness value (585 DPH) may have a higher carbon content and a finer microstructure compared to the material with the lowest hardness value (185 DPH). The other two values, 219 DPH and 210 DPH fall somewhere in between and could have varying carbon content and microstructure as well. It is also worth noting that the DPH values provide a relative measure of hardness and do not provide an absolute measure of a material's strength or resistance to deformation.
To learn more about carbon, visit:
https://brainly.com/question/13174943
#SPJ11
True or false?Inventory-risk costs are a form of carrying costs.
Answers
or...................
Answer:
i believe it is true
Explanation:
fill in the blank: the fact that the dataset includes people who all live in the same zip code might get in the way of ____ . 1 point spreadsheet formulas or functions fairness accuracy data visualization
Answers
The fact that the dataset includes people who all live in the same zip code might get in the way of fairness.
A dataset is a compilation of data that has been organized in a specific way. Data can be collected, aggregated, and stored in a variety of formats, including spreadsheets, text files, and databases.The following are some ways that the fact that the dataset includes people who all live in the same zip code might get in the way of fairness: If the data is heavily skewed, it may be difficult to draw accurate conclusions from it. When a dataset is not fair, it may result in unintended consequences. A dataset that is not representative of the larger population may be biased.
Learn more about dataset: https://brainly.com/question/28168026
#SPJ11
Meredith implements a "graph coloring" algorithm, which comes up with colors for graph vertices such that no neighboring vertices share the same color.
The algorithm outputs graph colorings like this one:
Using a palette of just 3 colors, she runs the algorithm on graphs with varying amounts of vertices and records how long it takes.
Her findings are summarized in this table:
Graph vertices Steps
4 81
6 729
8 6561
Based on the table, which of the following statements describe the run time for this algorithm?
????️Note that there are 2 answers to this question.
Answers
The process of giving different colors to each vertex of a graph G so that no two neighboring vertices receive the same color is known as graph coloring.
What is Graph coloring algorithm?When coloring a graph, the goal is to use as few colors as possible. The chromatic number of a graph G is the lowest set of colors needed to color that graph. A NP Complete problem is the graph coloring issue.
A unique characteristic of a graph coloring is that two neighboring vertices, or those with an edge connecting them, cannot have the same color.
The difficulty stems from the fact that two countries (or states) must have distinct colors when they are close to one another when coloring a map. The United States is depicted on the following four-color map.
Therefore, The process of giving different colors to each vertex of a graph G so that no two neighboring vertices receive the same color is known as graph coloring.
To learn more about Algorithm, refer to the link:
https://brainly.com/question/22984934
#SPJ1
10.46 A 65-kVA load with a lagging power factor is combined with a 25-kVA synchronous motor load which operates at pf = 0.60 leading. Find the power factor of the 65-kVA load, if the overall power factor is 0.85 lagging. ??? Ans. 0.585 lagging
Answers
Answer:
Read Below
Explanation:
Apparent power (volt-amperes) is the trigonometric sum of Real power (watts) and reactive power (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARs squared
similarly, power factor, the ratio of real power to apparent power, is the cosine of the angle between the real power leg and apparent power hypotenuse of a right triangle (Reactive power being the other leg).
Just use these relationships and a bit of high school trigonometry and you can calculate the apparent power and power factor for the system you are describing.
Hopes this Helps :D
Mark me Brainiest Please : )
The power factor of the 65-kVA load, if the overall power factor is 0.85 lagging is 0.585 lagging.
What is Apparent energy?
Apparent energy (volt-amperes) is the trigonometric sum of Real energy (watts) and reactive energy (volt-amperes reactive - VARs). Stated mathematically: VA squared = watts squared plus VARS squared similarly, energy component, the ratio of actual energy to obvious energy, is the cosine of the perspective among the actual energy leg and obvious energy hypotenuse of a proper triangle (Reactive energy being the opposite leg).
Just use those relationships and a chunk of excessive college trigonometry and you may calculate the obvious energy and energy component for the machine you're describing.
Read moe about the load :
https://brainly.com/question/2264373
#SPJ2
Show that the definition of electric field strength (E = Felectric/q0) is equivalent to the equation E = kCq/r2 for point charges.
Answers
It has been shown that the definition of electric field strength E = Felectric/q0 is equivalent to the equation E = kCq/r2 for point charges.
The electric field is described as the electrical force per unit of charge that a small test charge would experience if it were located at the same location as the charge that is producing the electrical field. In equation form, the electric field strength (E) is given by
E = Felectric/q0
where Felectric is the electric force that a small test charge would experience when positioned near a source charge q0.
The electric field strength can also be expressed in terms of Coulomb's constant k, the source charge q, and the distance r from the source charge using the equation
E = kCq/r2
where C is the Coulomb unit of charge.It can be shown that the equation
E = Felectric/q0
is equivalent to the equation
E = kCq/r2 for point charges by making use of Coulomb's law.
Coulomb's law states that the electric force between two point charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Mathematically, Coulomb's law is expressed as
F = kq1q2/r2
where F is the force, q1 and q2 are the point charges, k is Coulomb's constant, and r is the distance between the two charges.
To derive the electric field strength equation using Coulomb's law, first, divide both sides of Coulomb's law by the charge q0 to get
Felectric/q0 = kq0q1/r2.
Now, since q1 represents the source charge, substitute it for q0 to get
Felectric/q0 = kCq/r2
which is the same as the electric field strength equation
E = kCq/r2.
Know more about the electric field strength
https://brainly.com/question/30900321
#SPJ11
Complete the sentence using the correct term.
are made without yeast and are often savory or sweet.
Answers
Answer:
Quick Breads
Explanation:
I think this is correct. I am not for sure i just looked it up and it says word for word that this is the answer.
Answer:
Quick Breads
Explanation:
I got it right on my Plato test
Think of five people with high self-esteem and write their names and how they show high self - esteem.
Answers
Michelle Obama-
Kylie Jenner-
Gigi Hadid-
And
Bella Hadid-
what are the general requirements pertaining to the use of safety belts
Answers
Safety belts are an essential safety feature in vehicles. They protect the occupants of a vehicle during accidents or unexpected movements, such as sudden braking.
The following general requirements must be met in order to ensure the proper use of safety belts:
Seatbelts must be in good condition and not frayed or damaged in any way.Seatbelts must be securely attached to the vehicle and must be firmly anchored to prevent movement or detachment.The driver and all passengers must wear seatbelts whenever the vehicle is in motion.The shoulder strap must be worn over the shoulder and across the chest, and the lap strap must be worn low and snug across the hips and pelvis.Seatbelts must not be twisted or turned in anyway.Seatbelts should be adjusted for each individual to ensure a secure and comfortable fit.The driver is responsible for ensuring that all passengers are wearing seatbelts properly before starting the vehicle.In summary, the use of safety belts is essential in ensuring the safety of vehicle occupants. By adhering to the general requirements, the risk of injury and fatalities during accidents can be significantly reduced.
To learn more about Safety belts, visit:
https://brainly.com/question/5626690
#SPJ11
Centrifugal pump delivers water against a net head of 14. 5 m and at designed speed of 1000 rpm. The vanes are curved back at an angle of 300 with the periphery. The impeller diameter is 300 mm and outlet width 50 mm. Determine the discharge of the pup, if the manometric efficiency is 95 %
Answers
The discharge of the pump is approximately 0.0744 cubic meters per second.
To determine the discharge of the centrifugal pump, we need to consider the head, impeller diameter, outlet width, and the manometric efficiency.
Given:
Net head (H) = 14.5 m
Impeller diameter (D) = 300 mm = 0.3 m
Outlet width (W) = 50 mm = 0.05 m
Manometric efficiency (η) = 95% = 0.95
The discharge (Q) can be calculated using the following formula:
Q = (π/4) * D^2 * W * N / (g * H * η)
where:
π = 3.14159 (pi)
D = Impeller diameter
W = Outlet width
N = Speed of the pump in revolutions per minute (rpm)
g = Acceleration due to gravity (9.81 m/s^2)
H = Net head
η = Manometric efficiency
Substituting the given values into the formula:
Q = (3.14159/4) * (0.3)^2 * 0.05 * 1000 / (9.81 * 14.5 * 0.95)
Simplifying the equation:
Q ≈ 0.0744 m^3/s
Therefore, the discharge of the pump is approximately 0.0744 cubic meters per second.
Learn more about discharge here
https://brainly.com/question/31460508
#SPJ11
List 3 specific things you can do with a screw gun (not just screw in screws)
Answers
Answer:
1: Attaching a fork and wip eggs/batter/ ect.
2: You can entertain a cat by putting yarn on the gun/drill
3: If you get yarn everywere, you can spin the yarn up on the drill/gun
Explanation:
I hope this helps you out somehow
Because tires do not come perfectly round and balanced, most tire manufacturers indicate
the tire's highest point with a dot and the tire's lightest point with a dot.
Answers
I'm not sure if this is a question to answer or...I dont know lol. Sorry if I couldn't answer this but yeah-
please i want to paraphrase this paragraph please helppppppppp don't skip!!!!!!
Answers
What arethe two tag codes for performing ordered and un ordered lits using HTML
Answers
Answer:
The HTML ul tag is used for the unordered list. There can be 4 types of bulleted list: To represent different ordered lists, there are 4 types of attributes in <ul> tag. This is the default style. In this style, the list items are marked with bullets.
Answer:
Ordered
\({ \tt{ < ol > .... < / ol > }}\)
Unordered
\({ \tt{ < ul > .... < /ul > }}\)
pls help me it’s due today
Answers
Answer:
C. 14.55
Explanation:
12 x 10 = 120
120 divded by 10 is 12
so now we do the left side
7 x 3 = 21 divded by 10 is 2
so now we have 14
and the remaning area is 0.55
so 14.55
check engine light is illuminated on the instrument panel. what action should you take
Answers
Answer:
Connect your computer to the OBD(On-Board Diagnostics) port and see whats wrong
Explanation:
im a mekanic
mechanik
mecanic
meckanic
nvm, I fix cars
NEED A CHEN NOTATION DIAGRAM OF THE FOLLOWING INFORMATION
***** This is a Chen Notation ER Diagramming Assignment. Only Chen Notation Diagrams will be accepted. *****
During peak periods, the Temporary Employment Corporation (TEC) places temporary workers in companies. TEC’s manager gives you the following description and business rules of the business:
TEC has a file of candidates who are willing to work. They would like to put this Candidate File Information into a Database.
If the candidate has worked before, that candidate has a specific job history. (Naturally, no job history exists if the candidate has never worked.) Each time the candidate works temporarily for an outside company, one additional job history record is created. TEC wants the candidate's Job History in a database.
Each candidate has earned several qualifications. Each qualification may be earned by more than one candidate. (For example, it is possible for more than one candidate to have earned a BBA degree or a Microsoft Network Certification. And clearly, a candidate may have earned both a BBA and a Microsoft Network Certification.) TEC wants to store all existing and future types of Qualifications in a database.
TEC offers courses to help candidates improve their qualifications. This is done by offering training courses so that candidates can earn qualifications. TEC wants to keep store all courses that they offer for qualifications in a Database
Every course develops one specific qualification; however, TEC does not offer a course for every qualification. Some qualifications have multiple courses that develop that qualification.
Some courses cover advanced topics that require specific qualifications as prerequisites. Some courses cover basic topics that do not require any prerequisite qualifications. A course can have several prerequisites. A qualification can be a prerequisite for more than one course.
TEC also has a list of companies that request temporary employees.
Each time a company requests a temporary employee, TEC makes an entry in the Openings folder. That folder contains an opening number, a company name, required qualifications, a starting date, and anticipated ending date, and hourly pay. TEC wants to store all company requests for temporary jobs in a database.
When a candidate matches the qualification, the job is assigned, and an entry is made in the Placement Record folder. That folder contains an opening number, a candidate number, the total hours worked, etc. In addition, an entry is made in the job history for the candidate.
An opening can be filled by many candidates, and a candidate can fill many openings.
Summary Information that has to be Maintained
Client Company Information. These are companies that need Temporary Workers.
Job Opening Information, a Company offers one or more Temporary Job-Opening Positions
Qualification or Skills of the Candidates in (TEC). A Candidate can have one or more Qualifications
Candidate or Temporary Worker Information. A Candidate is a Temporary Worker seeking a position
Candidate JOB_HISTORY Information. This is a Temporary Workers Work History.
Placement Information. This is the Record of all Temporary Workers Placed in a Temporary Job
Training Courses that are being offered to (TEC) Candidates.
Training Courses that Candidates have taken
Given that information, do the following:
Draw the Chen ERDs for this enterprise
Identify all Entities
Identify all Attributes for the Entities
Identify all possible relationships
Identify the Cardinality for each relationship
Resolve all 1: N relationships
Resolve all M: N relationships
Identify Primary Keys and map the Foreign Keys based on the described Cardinality
Answers
The ER diagram for the Temporary Employment Corporation (TEC) based on the business rules given is given below: Attributes for Entities:
(One-to-Many)One candidate can have many job histories. (One-to-Many)One job history can belong to only one candidate. (One-to-One)One placement can belong to only one candidate. (One-to-One)One job opening can be placed by many placements. (One-to-Many)One candidate can have many placements.
In the given diagram below, all the relationships and primary keys are labeled correctly and the ER diagram is resolved for all M:N relationships and 1:N relationships. If you want to add more attributes to each entity, you can do it accordingly:
To know more about Employment visit:
https://brainly.com/question/17459074
#SPJ11
search the web for the term security best practices. compare your findings to the recommended practices outlined in the nist documents.
Answers
Based on your question, I will provide a concise comparison of security best practices found on the web and those outlined in the NIST documents.
Web-based security best practices often emphasize the following:
1. Regular software updates and patches
2. Strong, unique passwords and multi-factor authentication (MFA)
3. Encryption of sensitive data
4. Regular data backups
5. Employee training and awareness
6. Network segmentation
7. Incident response planning
NIST documents, such as the NIST Cybersecurity Framework and NIST SP 800-53, provide more comprehensive guidelines for organizations. Key recommendations include:
1. Identify: Develop an understanding of the organization's cybersecurity risk to systems, assets, and data.
2. Protect: Implement safeguards to ensure the delivery of critical infrastructure services.
3. Detect: Identify the occurrence of a cybersecurity event.
4. Respond: Take appropriate action regarding a detected cybersecurity event.
5. Recover: Maintain plans for resilience and restoration after a cybersecurity event.
Comparing the two sources, both emphasize the importance of proactive measures, such as regular updates and employee training. However, NIST documents provide a more systematic approach by addressing not only prevention but also detection, response, and recovery from cybersecurity events. This comprehensive framework is essential for organizations seeking to maintain robust security postures in the face of evolving cyber threats.
To know more about document visit:
https://brainly.com/question/12401517
#SPJ11
Two current coils are installed. What is their function and why
necessary to install three coils?
Answers
Answer:
What is the function of the coil?
coil, in an electric circuit, one or more turns, usually roughly circular or cylindrical, of current-carrying wire designed to produce a magnetic field or to provide electrical resistance or inductance; in the latter case, a coil is also called a choke coil (see also inductance).
Explanation:
Brainliest me
Can some help me with this !!! Is 26 points!!
Answers
15,000,000 ohms because M=10^6
It describes the physical and social elements common to this work. Note that common contexts are listed toward the top, and less common contexts are listed toward the bottom. According to O*NET, what are common work contexts for Reporters and Correspondents? Check all that apply.
Answers
Answer:
Acef
Explanation:
Edginuity 2021
Answer:
2,3,4,5
Explanation:
guy above me is wrong
1. measurements of a slotted aloha channel with an infinite number of users show that 10%of sots are idle (a) what is the channel load, g? is the channel overloaded or underloaded? (b) what is the throughput of the system?
Answers
Slotted Aloha is a random access protocol that allows multiple users to transmit data on a shared communication channel. In this protocol, the transmission time is divided into slots, and each user can transmit data only at the beginning of a slot.
Throughput = g * (1 - g)^(n-1) * C
Where n is the number of users and C is the channel capacity.Assuming that the channel capacity is 1 bit per slot and the number of users is infinite, the throughput can be calculated as follows:
Throughput = 0.9 * (1 - 0.9)^(∞-1) * 1The term (1 - 0.9)^(∞-1) approaches zero as the number of users becomes infinite. Therefore, the throughput is approximately 0.9 bits per slot, which is the same as the channel load. The slotted Aloha channel with an infinite number of users is overloaded with a channel load of 0.9. The throughput of the system is approximately 0.9 bits per slot.
For such more questions on Slotted Aloha
https://brainly.com/question/15371990
#SPJ11
Which of the following conditions evaluates to True when the intDays variable contains the number 5?
a. If intDays = 5 Then
b. If intDays <> 0 Then
c. If intDays > 1 Then
d. all of the above
Answers
The statement that evaluates to True when the `intDays` variable contains the number 5 is `If intDays = 5 Then`.In the given question, we are asked to determine the statement that evaluates to True when
the `int Days` variable contains the number 5.The different statements given are:a. If intDays = 5 Thenb. If intDays <> 0 Thence. If int Days > 1 Thind. all of the aboveOut of these, the only statement that evaluates to True when the `intDays` variable contains the number 5 is `If intDays = 5 Then`.Therefore, the answer to the given question is option a. If intDays = 5 Then.The other options are as follows:b. If intDays <> 0 Then evaluates to True for all values of `intDays`, except 0.c. If intDays > 1 Then evaluates to True for all values of `intDays` greater than 1.d. All of the above does not evaluate to True when `intDays` contains the number 5.
To know more about evaluates visit:
brainly.com/question/12837686
#SPJ11
For the network of Fig. below, draw the output waveform if Vr = 4.3V , R = 1000Omega and Vi=25 sin ot. Assume an Si diode is used. + R D V_{i}; V_{r}; V_{o}
Answers
Which form of carbon is released from volcanoes back into the atmosphere ethylene carbon dioxide calcium carbonate?
Answers
9. The highest voltage typically encountered on the job by a residential electrician is
volts.
A. 120
B. 600
C. 240
D. 480
Answers
Answer:
240
Explanation:
The highest voltage typically encountered on the job by a residential electrician is C. 240 volts.
What is voltage?Voltage is the measure of the difference in electrical power between two points in a circuit.
It is like the force that pushes electric charges in a circuit and is measured in volts (V) and affects how strong the electric current flows in a wire.
In many countries, the United States included, residential electrical systems often use a split-phase setup with a voltage of 120/240 volts.
This voltage is widely used for things like household appliances, lights, and other electrical needs in homes.
Learn more about electrical voltage at brainly.com/question/27861305
#SPJ2
a shunt regulator utilizing a zener diode with an incremental resistance of 10 q is fed through a 200-q resistor. if the raw supply changes by 1.0 v, what is the corresponding change in the regulated output voltage?
Answers
A shunt regulator's controlled output voltage changes in response to changes in the raw supply voltage and the properties of the Zener diode employed in the regulator.
Given that the shunt regulator employs a Zener diode with an incremental resistance of 10 and is supplied through a 200 resistor, we can use Ohm's law to compute the voltage drop across the Zener diode: V Zener = I Zener multiplied by R Zener where V Zener denotes the voltage drop across the Zener diode, I Zener is the current flowing through the Zener diode, and R Zener denotes the Zener diode's incremental resistance. The voltage drop across the Zener diode in a shunt regulator is kept constant by adjusting the current through the diode. When the voltage of the raw supply fluctuates,
learn more about voltage here:
https://brainly.com/question/29445057
#SPJ4