A type of computer output device that works based on electrostatic principles is the:_________
Answers
The answer to the question is "electrostatic printer." An electrostatic printer is a type of computer output device that uses electrostatic principles to create an image or text on paper. It operates by applying an electrostatic charge to a drum or belt, which is then selectively discharged to create the desired image.
1. The printer starts by applying a uniform positive charge to the surface of the drum or belt.
2. A laser or LED is used to create a pattern of light on the surface of the drum or belt. This light causes certain areas to become discharged, while others remain charged.
3. A toner, which consists of fine particles of pigment, is applied to the surface of the drum or belt. The charged areas attract the toner particles, while the discharged areas repel them.
4. The toner is transferred from the drum or belt onto the paper, which is then heated to fuse the toner particles onto the paper permanently.
5. Finally, the paper with the printed image is ejected from the printer.
An electrostatic printer is commonly used in laser printers and photocopiers. It provides high-quality prints and is efficient for both text and graphics.
Learn more about electrostatic printer: https://brainly.com/question/28275431
#SPJ11
Related Questions
HELP ME PLZ IM AM STUCK ON THIS I NEED AWNSERS
Answers
Answer:
What are your cards?? I may be able to help you if you put your cards. :)
Explanation:
Skyler needs to print mailing labels for a fundraising campaign her company is hosting. which type of software should she use?
Answers
Since Skyler needs to print mailing labels for a fundraising campaign her company is hosting, the type of software that she need to use is Word Processing software.
What is word processing software and examples?The term Word Processing is known to be a term that connote the act or process why which on make use of the computer to make , edit, save as well as print documents.
Note that In order to carry out word processing, one need to make use of a specialized software (called the Word Processor).
Therefore, based on the above, Since Skyler needs to print mailing labels for a fundraising campaign her company is hosting, the type of software that she need to use is Word Processing software.
Learn more about Word Processing software from
https://brainly.com/question/985406
#SPJ1
Which system procedure is normally done with both hand valves opened on a gauge manifold connected to a refrigeration system?
Answers
Answer:
The answer is "Evacuation".
Explanation:
The evacuation in coolants was its removal from the coolant of heat, air, and non-condensable toxic gases. Its seal HVAC system is drawn to a vacuum and use a pressure washer throughout this process.
It loses the air and water vapor throughout the coolant point is called it. The two primary goals are accomplished by evacuating, that are eliminates content and hydrates.Answer:
the answer is c i belive
Explanation:
i belive this is the answer good luck :>
both arrays and structures are capable of storing multiple values. what is the difference between an array and a structure?
Answers
The main distinction between an array and a structure is that an array allows us to store a group of data items, many of which are the same data type, but a structure allows us to store a variety of data types as a single unit.
Are struct and array the same thing?No, a data structure that may hold variables of many sorts is referred to as a structure. While not supporting different data types, an array is a form of data structure that is used as a container and can only hold variables of the same type.The main distinction between an array and a structure is that an array allows us to store a group of data items, many of which are the same data type, but a structure allows us to store a variety of data types as a single unit.A data structure that may hold variables of many sorts is referred to as a structure.To learn more about Array refer to:
https://brainly.com/question/26104158
#SPJ4
modify the code you developed for problem 1 in hw_05 so that the function x_to_the_n() is called by reference. hint: declare the function arguments as pointers.
This program calculates the power of an integer to an integer #include long int x_to_the_n(int x, int n) int i; long int a = 1; n; ++i) for (i = 1; i <= a = a*x; return a; int main(void) E int x, n; long int b; printf ("Enter an integer x and power n:\n"); scanf("%i $i", ex, en); b = x_to_the_n(x, n) ; printf("$^$i = $11.",x,n,b); return 0;
Answers
To modify the code in problem 1 from hw_05 to use call by reference, you need to change the function signature and function definition of x_to_the_n() to accept pointers as arguments.
How can the code in problem 1 from hw_05 be modified to use call by reference?The modified code for problem 1 in hw_05 makes use of call by reference by declaring the function arguments as pointers.
This allows the function x_to_the_n() to directly modify the values of x and n in the main function. The program prompts the user to enter an integer x and power n, and then calculates the result using a loop.
The updated value of a is returned from the function and assigned to the variable b. Finally, the calculated result is printed using printf.
By using call by reference, any changes made to x and n within the function x_to_the_n() will reflect in the main function as well.
Learn more about code
brainly.com/question/15301012
#SPJ11
Create a summary of no less than 125 words of a show that would NOT go over well with television producers because it is targeted to people in the least desirable groups. Include the title of the show, the main characters, and a description of the show's premise. Explain why this show would NOT go over well with television producers.
Answers
Answer:
Follows are the solution to this question:
Explanation:
Its Mid is also an American drama about a Kentucky-based middle-class family who've been struggling to live in an impoverished house, home and earn children on even a daily basis. Mike and Frankie, both live in Orson, Indiana, were mid-aging adults. Users got three kids named Axl, Sue, and Brick. Michael was its owner of a local quarry as well as Frankie, the seller of a motorcycle. It was great for Scriptwriters since it is related to America's many households, a middle and upper-class family. Despicable is an American dramedy about an impoverished and unstable Chicago family.
It among participants is Frank, Gallagher's dad, but Fiona, their household's oldest son, as she actual mom Monica goes up and down as she likes. The other five children of Gallagher are Lips, Yan, Debbie, Lori, and Liam.
Frank is an alcoholic, but Fiona works very hard and provides for her sisters and brothers. It is not used for scriptwriters, because it is related to the poor and victims of abuse of drugs, which aren't considered "wanted." Since that concerns an "unwanted" listeners, its show was indeed a success.
Casting is one of the oldest known manufacturing processes.
True or false
Answers
The local DNS server. Check all of the phrases below that state a true property of a local DNS server. - The local DNS server record for a remote host is sometimes different from that of the authoritative server for that host.
- The local DNS server holds hostname-to-IP translation records, but not other DNS records such as MX records.
- The local DNS server can decrease the name-to-IP-address resolution time experienced by a querying local host over the case when a DNS is resolved via querying into the DNS hierarchy. - The local DNS server is only contacted by a local host if that local host is unable to resolve a name via iterative or recursive queries into the DNS hierarchy.
Answers
A local DNS server can have different records than the authoritative server, can improve name resolution speed, and is contacted by a local host when it cannot resolve a name through iterative or recursive queries into the DNS hierarchy. Therefore, options A, C, and D are correct.
A local DNS server is a network component that serves as a central repository for domain name system (DNS) records within a local network. It holds hostname-to-IP translation records, allowing it to resolve domain names to their corresponding IP addresses.
The local DNS server is typically used by devices within the local network to facilitate faster and more efficient name resolution. It can cache frequently accessed DNS records, reducing the need for external DNS queries and enhancing network performance. Additionally, it can provide customized DNS configurations and overrides specific to the local network's requirements.
Learn more about DNS server here:
https://brainly.com/question/32474101
#SPJ12
what are the answers for Quiz 7 answers computer science principles
Answers
Answer:
unknown
Explanation:
this sounds like it is very vague and could be confused with other tests, i do not know of any tests like this
another thing is you can ask each question, even though it would cost more points, it would be better in the long run, people with similar questions can find their answers easier, AND you can get the correct answer for each question with confidence
that and people are more willing to answer one question at a time then a whole quiz lol
not saying what you are doing is bad, its just impractical and not an easy way to go about this
hope you find the answers you need, have a great day/night mate :D
In order to qualify for the Certified Computer Forensic Technician, Basic Level certification, how many hours of computer forensics training are required
Answers
In order to qualify for the Certified Computer Forensic Technician, Basic Level certification, a minimum of 40 hours of computer forensics training is required.
The International Association of Computer Investigative Specialists (IACIS), which administers the certification, requires applicants to provide evidence of at least 40 hours of computer forensics training, as well as two years of professional experience in the field.
This training is essential to gain foundational knowledge in computer forensics, which includes topics like evidence handling, digital forensics tools, and investigation techniques. By completing the required hours, you'll be better prepared to obtain the certification and excel in the field of computer forensics.
To know more about Computer Forensic visit:-
https://brainly.com/question/29025522
#SPJ11
why do most operating systems let users make changes
Answers
By these changes you most likely are thinking of the term 'Over Clocking'
Over Clocking is used on most Operating Systems to bring the item your over clocking to the max.
Over Clocking; is mostly used for Crypto mining and gaming.
11. Who is considered a knowledge worker? Will you have a career as a knowledge worker? Explain.
12. When would a business use mobile computing or web-based information systems in their operations? Discuss an example of a business function that could be implemented on each platform, and explain why that platform would be preferred over the other platform.
13. TPSs are usually used at the boundaries of the organization. What are boundaries in this context? Give three examples of boundaries.
Answers
A knowledge worker is an individual who works primarily with knowledge, particularly in a professional context.
11. A knowledge worker's job requires a high degree of expertise, education, and skills, as well as the ability to think critically and creatively. If you work in a field that involves research, analysis, or other knowledge-based activities, you are likely to be a knowledge worker. Many jobs require knowledge workers, including scientists, engineers, doctors, lawyers, and accountants. If you are interested in pursuing a career as a knowledge worker, you will need to develop your knowledge, skills, and expertise in your chosen field.
12. Businesses would use mobile computing or web-based information systems in their operations when they require to streamline their processes and improve their efficiency. An example of a business function that could be implemented on each platform is given below:
Mobile Computing: A business can use mobile computing to track employees' location and send notifications. This can be useful for delivery companies, food delivery, and transportation companies that require to keep track of their employees' movement and scheduling. In addition, mobile computing can be used to make sure that customer-facing businesses like restaurants and retail stores can take payments on the go.
Web-based Information Systems: Businesses that manage a large number of clients may benefit from using web-based information systems to store customer data and track orders. This can be useful for businesses that require to manage customer relationships like e-commerce stores or subscription services. In addition, web-based information systems can be used to make sure that customer-facing businesses like restaurants and retail stores can take payments on the go.
13. Boundaries in the context of TPS are the points at which the system interacts with the external environment. For example, when a transaction occurs, the boundary is where the data is entered into the system and then passed on to other systems or applications. The boundaries of an organization can be physical, such as the walls of a building or geographical boundaries. They can also be conceptual, such as the separation between different departments within a company. The three examples of boundaries are as follows: Physical Boundaries: The walls of a factory or office building are examples of physical boundaries. In addition, a shipping company might have to deal with geographical boundaries when transporting goods between countries or continents. Conceptual Boundaries: Different departments within a company might have different conceptual boundaries. For example, the sales department may have different priorities and objectives than the finance department. External Boundaries: These are the points at which the system interacts with the external environment. An example of an external boundary is when a transaction is initiated by a customer or a vendor.
To learn more about knowledge workers: https://brainly.com/question/15074746
#SPJ11
how can I log in if I cant remember my email that I used
Answers
Forgetting your email address can make it difficult for you to log in to your account. However, there are a few steps you can take to recover your email address and regain access to your account. Below are some tips on how to log in if you can't remember your email address.
Check other email accounts: You may have used a different email address to sign up for the account. Check any other email accounts you have to see if you can find the registration email for the account in question.
Check your browser history: If you've used your account before, your email address may be saved in your browser history. Go to your browser's history and search for the website where you created your account.
Contact customer support: If you're still unable to recover your email address, you can contact the customer support team of the service you're trying to log into. They may be able to assist you in recovering your account using other information like your name or phone number.
To know more about account visit:
https://brainly.com/question/5640110
#SPJ11
consider the following class declarations. public class base { private int myval; public base() { myval
Answers
"The class "base" is declared with a private integer variable "myval" and a constructor method to initialize it."
Now let's move on to the second paragraph for a more detailed explanation:
The class "base" serves as a blueprint for creating objects. It includes a private variable "myval," which can only be accessed within the class itself. This private access modifier restricts direct access to the variable from outside the class. The constructor method, declared as "public base()," is a special method that is automatically called when an object of the "base" class is created. Its purpose is to initialize the "myval" variable with a specific value or perform any other necessary setup operations. By using a constructor, you ensure that the "myval" variable is properly initialized when an object of the "base" class is instantiated.
For more information on initialize visit: brainly.com/question/31579690
#SPJ11
5. 2 As a junior IT consultant, you are asked by the client why certain information systems are successfully implemented while others are not. Why is that the case? Discuss the reason and common success factors with the client
Answers
Certain information systems are successfully implemented while others are not due to the following:
Poor planning.Lack of technical knowledge.Use of sub-standard tools.What is Information system?This is defined as the software that helps organize and analyze data. For it to be successfully implemented, there must be adequate knowledge and planning.
When these are absent, mistakes are bound to happen which will hamper the success.
Read more about Information system here https://brainly.com/question/14688347
which key must be pressed in addition to clicking on a hyperlink for it to be followed?
Answers
The key you need to press together with the click to be able to redirect to a hyperlink is the Control key.
In an electronic environment, a hyperlink is usually a word or phrase, highlighted in blue and underlined, or even an image, found in a web text and containing the command to "transfer" the user to another relevant web page, from the source node to the destination node.
By selecting this word or phrase the user has the ability to further research a topic from a variety of perspectives to compare information from different sources and actors.
Learn more in https://brainly.com/question/7620368
suggest me anime genre : adventure ecchi
Answers
which two classes of pd use the same minimum power from the pse?
Answers
The main answer to your question is that the two classes of PD (Power over Ethernet) that use the same minimum matrix power from the PSE (Power Sourcing Equipment) are Class 1 and Class 2 PDs.
Class 1 PDs are those devices that require a maximum power of 3.84 watts from the PSE. These devices include VoIP phones, wireless access points, and IP cameras. On the other hand, Class 2 PDs require a maximum power of 6.49 watts from the PSE. These devices include IP phones, video phones, and wireless access points with radios that have multiple streams.
It is worth noting that higher classes of PDs require more power from the PSE, and as such, the PSE must be able to deliver the required amount of power to ensure proper functionality of the connected devices. In summary, the long answer to your question is that Class 1 and Class 2 PDs use the same minimum power from the PSE, which is up to 3.84 watts.
To know more about matrix visit:
https://brainly.com/question/14559330
#SPJ11
I need help!
A standard is a:
A. normal way of addressing business letters.
B. level of quality or performance that people accept as normal.
C. a document with specific rules and regulations.
D. set unit of measurement for a particular purpose.
Answers
Explanation:
The answer is B. level of quality or performance that people accept as normal
Answer:
A standard is a: level of quality or performance that people accept as normal.
Explanation:
Just did this and got it correct.
A _____ describes two or more computers connected to each other.
computer network
client
server
switch
Answers
Answer:
Computer network.
Since it is 2 or more computers connected together.
Thank You!
Which IPR will provide legal protection to the product from competitior infringement
Answers
The product would have legal protection from competitor infringement under trade mark protection.
In order for people to coexist in freedom, regardless of their lifestyle or political views, the Ministry of Justice and Security is tasked with upholding the law. Because it safeguards original expression that is fixed in a tangible medium and the result of writing, copyright law is distinctive within the broader intellectual property regime. As used herein and as supported by an inquiry, the phrase "Protection Cases" refers to instances of child abuse, institutional abuse, neglect, and/or institutional neglect. Making sure a person's rights are not disregarded or violated is what it means to protect rights. From service commencement to discharge and follow-up, every step of the process reflects this affirmation and protection.
Learn more about legal protection here
https://brainly.com/question/30433228
#SPJ4
categorization and clustering of documents during text mining differ only in the preselection of categories.
Answers
The statement "categorization and clustering of documents during text mining differ only in the preselection of categories" suggests that the main difference between categorization and clustering lies in how the categories are determined. Let's break it down step by step:
Categorization involves assigning documents to predefined categories or classes based on specific criteria. In this approach, the categories are established beforehand, typically by experts or domain knowledge. The goal is to classify documents into distinct categories for easier organization and retrieval.
In summary, categorization relies on predefined categories determined prior to the analysis, while clustering identifies similarities and groups documents based on those similarities without predefining the categories.
To know more about categorization visit:
https://brainly.com/question/17137931
#SPJ11
I ONLY NEED HELP WITH QUESTION 6 SHOWING HOW TO USE EXCEL FORMULA WHEN FINDING THE ANSWER:EXERCISE 8: USING "LOOKUP" AND "COUNTIF" FUNCTIONS TO RANK EMPLOYEE PERFORMANCE Managers often like to rank employees performance. One scheme called "20-70-10," or more disparagingly as "Rank and Yank," categorizes the top 20 percent of employees as "Best," the middle 70 percent of employees "Near Best," and the bottom 10 percent as "Below Best." Go to the "Excel Student Spreadsheets BUS 2000" and click on the tab/worksheet labeled "Lookup". There you will find the performance ratings—on a ten-point scale—for 20 employees. Each employee has 3 performance ratings. • In the 5th Column, or Column E, calculate the average performance rating for each employee to one decimal place. • Then, in the 6th Column, or Column F, use the LOOKUP function below to classify the employees. o =LOOKUP(E2,{0,4,9,10},{"Below Best", "Near Best", "Best"}) The Lookup formula is structured as follows: • E2 is the Cell containing the data for which the calculation should be made. • 0 to 4 is the classification of "Below Best". • 4 to 9 is the classification of "Near Best". • 9 to 10 is the classification of "Best". • The words "Below Best", "Near Best", and "Best" are placed for each of the three classifications according to an employee’s average rating. Using the results, do the following: 1. List the names of the "Best" employees 2. List the names of the "Near Best" employees 3. List the names of the "Below Best" employees Next, redefine the Lookup function to classify employees as "Above Average" and "Below Average" based on whether they scored above or below an average of 5 in their three performance scores. Place the results in the 7th Column, or Column G. Next, we’re going to count how many employees were categorized as either "Above Average" or "Below Average". Place the following results in cells B23 and B24. 4. How many people scored "Above Average?" 5. How many people scored "Below Average?"To answer these questions, use the COUNTIF function. Its form is =COUNTIF(G2:G21, "Above Average"), where G2:G21 is the range of cells. In this example, the function counts the number of employees that were "Above Average" according to the former classification.Lastly, you will notice that more people scored "Above Average" than "Below Average" using 5 as the cut point. Redefine the LOOKUP formula so that a roughly equal number of employees are classified as "Above Average" and as "Below Average." 6. What is the new cutoff point?
Answers
The new cutoff point to classify employees as "Above Average" or "Below Average" is 4. This ensures a roughly equal distribution of employees in both categories, taking into account an average score of 5 as the dividing point.
To determine the new cutoff point in order to classify an equal number of employees as "Above Average" and "Below Average," we need to adjust the ranges in the LOOKUP function. Let's walk through the steps to find the new cutoff point
Step 1: Calculate the average performance rating for each employee in Column E.
Step 2: Use the LOOKUP function in Column F to classify employees as "Below Best," "Near Best," or "Best" based on their average rating. The formula is as follows:
=LOOKUP(E2, {0, 4, 9, 10}, {"Below Best", "Near Best", "Best"}
Step 3: List the names of the employees classified as "Best" in one column, the names of the employees classified as "Near Best" in another column, and the names of the employees classified as "Below Best" in a third column.
Step 4: Redefine the LOOKUP function in Column G to classify employees as "Above Average" or "Below Average" based on whether they scored above or below an average of 5 in their three performance scores. The formula is as follows:
=LOOKUP(E2, {0, 5, 10}, {"Below Average", "Above Average"}
Step 5: Use the COUNTIF function to count the number of employees categorized as "Above Average" and "Below Average." Place the results in cells B23 and B24. The formulas are as follows
B23: =COUNTIF(G2:G21, "Above Average")
B24: =COUNTIF(G2:G21, "Below Average")
Step 6: Compare he counts of employees classified as "Above Average" and "Below Average." If there are more employees classified as "Above Average," we need to adjust the cutoff point to achieve a roughly equal distribution.
To find the new cutoff point, we can adjust the ranges in the LOOKUP function in Column G. We want to divide the range of scores evenly between "Below Average" and "Above Average." Let's say we have N employees in total, and we want to divide them equally.
The new rnges in the LOOKUP function can be calculated as follows:
"Below Average" range: 0 to (5 - 1)
"Above Average" range: (5 - 1) to 1
Here, (5 - 1) represents the new cutoff point. We subtract 1 because we want to exclude the exact average score of 5 from either classification.
Therefore, the new cutoff point is 4.
To know more about EXCEL visit :
https://brainly.com/question/32047461
#SPJ11
Which one of these is an example of unnecessary debt?
A. You buy a perfectly good used car instead of an expensive new car
B. You buy your groceries on Friday instead of coupon Monday.
C. You charge clothes you don't really need on a high-interest store card.
D. You save up all year to take a great surfing vacation.
Answers
hope this helps :)
An example of unnecessary debt is when you change your clothes and don't really need on a high-interest score. Thus option C is correct.
What is unnecessary debt?An unnecessary debt can be caused by a variety of issues such as expensive life events, having children, or moving to a new house. It may also be due to poor money management. The debt is due to those things that are not needed and hence are unnecessary.
Find out more information about unnecessary debt.
brainly.com/question/3566270
What's the best definition of financial literacy? A. The efficient and effective management of money b. The ability to find, evaluate, utilize, share, and create financial content c. The business or services conducted by a tank d. The ability to use knowledge and skills to manage financial resources effectively
Answers
Answer:
D)The ability to use knowledge and skills to manage financial resources effectively.
Explanation:
financial literacy can be explained as the utilization of financial skills in an efficient way and having the deep understanding of it in tackling financial problems. The financial skills could be skills such as Budgeting, understanding of financial management as well as investing.
In cases whereby one lacks financial skills then it can be regarded as financial illiteracy.It should be noted that the best definition of financial literacy is The ability to use knowledge and skills to manage financial resources
A box has a mass of 5 kg. What is the weight of the box on Earth?
Show your work
Answers
Answer:
5 kg
Explanation:
5 kg
A network of Raspberry Pis are organized into a Beowulf cluster. There are 32 devices running non-stop. In a period of 72 hours, three of them failed. Calculate the mean time between failures (MTBF).
Answers
The mean time between failures (MTBF) for the Beowulf cluster of Raspberry Pis is 696 hours.
To calculate the mean time between failures (MTBF) for the Beowulf cluster of Raspberry Pis, we need to first define the formula for MTBF.
MTBF is calculated by dividing the total uptime of all devices by the number of failures. We can then convert this value into hours to get the MTBF.
In this case, we know that there are 32 Raspberry Pis in the cluster and three of them failed in a 72-hour period. This means that there were 29 devices that were running non-stop for 72 hours.
To calculate the total uptime, we can multiply the number of devices by the time they were operational:
Total uptime = 29 devices x 72 hours = 2,088 hours
Next, we can calculate the MTBF by dividing the total uptime by the number of failures:
MTBF = Total uptime / Number of failures = 2,088 / 3 = 696 hours
Therefore, the mean time between failures (MTBF) for the Beowulf cluster of Raspberry Pis is 696 hours.
For more questions on mean time between failures
https://brainly.com/question/30188655
#SPJ11
una laptop agarra mas internet que una computadora de escritorio?
Answers
una laptop agarra mas internet que una computadora de escritorio?
Su computadora no puede afectar la velocidad de Internet de sus otros dispositivos. ... La única forma en que su computadora puede reducir la velocidad de Internet de otros dispositivos es si no obtiene suficiente velocidad de su ISP y sus dispositivos luchan por un ancho de banda limitado.^^
Which type of relationship is depicted between Building and School? public class Building { private int squareFeet; } public class School extends Building{ private String schoolDistrict; } Select one: a. Has-a b. Is-a
c. Contains-a d. There is no relationship between the two classes
Answers
The relationship depicted between Building and School is the "is-a" relationship. In object-oriented programming, the "is-a" relationship represents inheritance, where a subclass inherits properties and behaviors from its superclass.
In this case, the class School is derived from the class Building, indicating that a School is a specific type of Building. The School class inherits the squareFeet property from the Building class and adds its own additional property, schoolDistrict. This relationship implies that a School is a more specialized form of a Building, sharing common attributes but also having its own unique characteristics. Therefore, the correct answer is b. Is-a.
To learn more about relationship click on the link below:
brainly.com/question/32082458
#SPJ11
when you are trying to identify in the ipde process, you will use a visual search pattern to identify what?
Answers
When you are trying to identify in the IPDE process, it means you are trying to find an important information. In order to find it with IPDE, you have to know what do you to look, how do you do that, where is the location and when to look.
What is IPDE process?IPDE stand for identify, predic decide and execute process. As a mention, there 4 step in IPDE, there are:
Identify is a process where you locate the potential hazard in the driving scene.Predict is a process when you decide where the problem may occur.Decide is a process to take the action.Execute is a process where you try the decide result by operating the car to check problem already solved or not.Learn more about IPDE process at https://brainly.com/question/2624496
#SPJ4