A dendrite contains
O postsynaptic endings; presynaptic endings
O oligodendrocytes; terminal buttons
O myelin sheaths; nuclei
O presynaptic endings; postsynaptic endings

The volume of the unit cell is approximately 7.52 x 10^7 cubic picometers.

In a body-centered cubic unit cell, there are atoms located at each corner of the cube, as well as one atom located at the center of the cube.

Therefore, the total number of atoms in a body-centered cubic unit cell is 2.

To find the volume of the unit cell, we first need to determine the length of the edge of the cube. Let's assume that the radius of the atom is equal to half the length of the diagonal of the cube.

Using the Pythagorean theorem, we can find the length of the diagonal:

diagonal^2 = (2 x radius)^2 + (2 x radius)^2 + (2 x radius)^2

diagonal^2 = 12 x radius^2

diagonal = √(12) x radius

diagonal = √(12) x 265 pm = 729.77 pm

The length of the edge of the cube is equal to the diagonal divided by the square root of 3:

edge length = diagonal / √3 = 729.77 pm / √3 = 422.46 pm

The volume of the unit cell is then calculated as:

volume = edge length^3 = (422.46 pm)^3 = 75,223,562 pm^3

to know more about body-centered cubic refer here:

https://brainly.com/question/4501234#

#SPJ11

We use models to represent molecules and compounds because they are to small to see with our eyes so we need a visual representation. Thus option A is correct.

Compounds are defined as a substance made up of two or more different elements that are combined in a fixed ratio.

Molecules are defined as a smallest particle of a substance that has their own physical and chemical properties.

Models can be defined as an informative representation of an objects, person or system.

We use models in chemistry because it help us to visualize or picture in your mind something which is difficult to see and understand.

Thus, we use models to represent molecules and compounds because they are to small to see with our eyes so we need a visual representation. Thus option A is correct.

To learn more about compounds, refer to the link below:

https://brainly.com/question/14117795

#SPJ1

Answer: Bismuth (Bi) , Nitrogen family

Explanation:

As the element has 5 valence electrons in the sixth energy level, which mens it belongs to 6th period as the valence electron has entered the 6th energy level.

Now as the electrons are  filled according to afbau's rule , the electronic configuration of the element will be :

\([Xe]4f^{14}5d^{10}6s^26p^3\)

Now as the atomic number of element is equal to the number of electrons in a neutral atom , the atomic number is 83 and the element is Bismuth (Bi). As the last electron enters p -subshell , it is  a p block element. It lies in group 15 which is nitrogen family.

Answer:

The answer may be A because that's what I believe

Mercury is a convenient liquid to use in a barometer because of its high density and low vapor pressure.

Mercury is commonly used in barometers due to its unique properties that make it suitable for this purpose. Firstly, mercury has a high density, which means it is much denser than most other liquids. This property allows the mercury column in the barometer to be relatively short, making the instrument more compact and easier to handle.

Secondly, mercury has a low vapor pressure at room temperature. Vapor pressure refers to the tendency of a substance to evaporate into a gas. In the case of a barometer, it is important that the liquid in the column does not readily evaporate, as it would affect the accuracy of the pressure measurement. Mercury's low vapor pressure ensures that the liquid remains in its liquid state and does not significantly evaporate over time, providing stable and reliable measurements.

Additionally, mercury is highly sensitive to changes in atmospheric pressure, making it an effective medium for measuring and indicating variations in air pressure. The height of the mercury column in the barometer corresponds to the atmospheric pressure, allowing meteorologists and scientists to track changes in weather patterns and make accurate pressure measurements.

Learn more about Mercury here

https://brainly.com/question/32244382

#SPJ11

Answer:

Explanation:

Both are cubes so

1.(x + 2y)

2.(2x - 3y)

3. (a - 2b)

4. (2a + 3b)

5. (a - 4)

The statement "Isotopes with an even number of both protons and neutrons are generally stable" is TRUE.

Isotopes with an even number of protons and neutrons are known as isotopes. A single element can have a different number of neutrons; such elements are known as isotopes. A nucleus containing a different number of neutrons will have a different mass number than the element's standard atomic number since the mass number is equal to the number of neutrons plus the number of protons in the nucleus.

There are 275 isotopes recognized for 81 stable elements, while there are 50 isotopes for elements that are radioactive and occur naturally.

Isotopes with an even number of both protons and neutrons tend to be more stable, as the strong nuclear force and the electromagnetic force in a nucleus cancel out, causing a more stable nucleus. The vast majority of stable elements have a nearly equal number of neutrons and protons, though there are some exceptions, such as beryllium-8 and helium-3.

Learn more about the isotopes from the given link-

https://brainly.com/question/13604636

#SPJ11

Heinrich Rocher and Gerd Binning were trying to solve the problem of seeing atoms directly. The criteria and constraints of the problem they were trying to solve are given below :

The scanning tunneling microscope is the method used to see the atoms, was developed by Heinrich Rocher and Gerd Binning.

Criteria :  Criteria is defined as the requirements we need to solve the problem. The standard needed to create successful solution. Criteria is specific outcome for a problem.

STM should be of metal.

STM works on the top of tip.

It works by scanning sharp metal. Bringing the tip very close to surface.

Applying electric voltage to tip .

Constraints: constraints is defined as the limits based on resources and environment. It has the conditions the problem must satisfy.

Does not require other than sharp tip.

It is limited by wavelength of light.

Thus, Heinrich Rocher and Gerd Binning were trying to solve the problem of seeing atoms directly. The criteria and constraints of the problem they were trying to solve are discussed above.

To learn more about criteria and constraints here

https://brainly.com/question/5498461

#SPJ1

True. Maltose is a disaccharide formed by the alpha-1,4 glycosidic linkage of two glucose molecules. Maltose is a reducing sugar. Thus, its two glucose molecules must be linked in such a way as to leave one anomeric carbon that can open to form an aldehyde group.

The glucose units in maltose are joined in a head-to-tail fashion through an α-linkage from the first carbon atom of one glucose molecule to the fourth carbon atom of the second glucose molecule (that is, an α-1,4-glycosidic linkage; see Figure 14.6.1 The bond from the anomeric carbon of the first monosaccharide unit is directed downward, which is why this is known as an α-glycosidic linkage. The OH group on the anomeric carbon of the second glucose can be in either the α or the β position, as shown in Figure 14.6.1.

learn more about glycosidic linkage here.

https://brainly.com/question/13988180.

#SPJ11

Explanation:

Dinitrogen trioxide is a nitrogen oxide. Nitrogen trioxide appears as a blue liquid with a sharp, unpleasant chemical odor.

Description: Dinitrogen trioxide is a nitrogen oxide.ChEBINitrogen trioxide appears as ...

Synonyms: Dinitrogen trioxideNITROGEN TRIOXIDENitrogen oxide (N2O3)10544-7...

Molecular Formula: N2O3

Molecular Weight: 76.012 g/mol

Emerging scientific ideas are new theories or ideas that are gaining attention in the scientific community, but have not yet been fully accepted or confirmed.

Emerging ideas refer to the new and innovative ideas or theories that have yet to gain full scientific acceptance. While a scientific consensus is a view or theory that has been universally accepted and confirmed by multiple experiments or research, an emerging scientific idea is a new and unproven theory or idea that is gaining attention in the scientific community. These emerging ideas may also be referred to as scientific hypotheses. In contrast to scientific consensus, emerging scientific ideas have not yet been subjected to rigorous testing and confirmation.

They are generally proposed to explain new observations or experimental results, which have not yet been fully understood or explained by established scientific theories. Emerging scientific ideas can have the potential to challenge the current scientific consensus. If an emerging scientific idea is found to be valid, it can ultimately lead to the establishment of a new scientific consensus. For example, the emerging scientific idea of the Higgs boson particle led to the discovery of a new field in particle physics, which is now an established scientific consensus.

for such more questions on scientific

https://brainly.com/question/29886197

#SPJ8

Answer:

venus

Explanation:

hope i helped

brainliest pls pls pls

-Zylynn

Answer: I would say that Saturn is most like Earth. Not only does it have moons, like Earth, but the atmosphere is also denser like Earth. It also has windstorms, granite they are much more intense than Earth’s, but they do indeed happen. Saturn also has hydrogen gas; this gas is here on Earth supporting life in our ocean. Therefore, there is a chance that the conditions on Saturn could provide the essentials for there to be life.

Answer:

5 would be the large intestine

Explanation:

Answer:

To walk or run, and to wake up.

The mass of ether that can be put into a 130 mL beaker is approximately 92.3 grams.

To calculate the mass of ether that can be put into a 130 mL beaker, we need to know the density of ether.

The density of ether varies depending on the specific type of ether, but assuming you are referring to diethyl ether, the density is approximately 0.71 g/mL.

Using the density and the volume of the beaker, we can calculate the maximum mass of ether that can be put into the beaker as follows:

Mass of ether = Density x Volume

Mass of ether = 0.71 g/mL x 130 mL

Mass of ether = 92.3 grams

Therefore, the maximum mass of diethyl ether that can be put into a 130 mL beaker is approximately 92.3 grams.

Learn more about density at

https://brainly.com/question/26364788

#SPJ1

Clements is best known for his theory of community development or plant succession. He claimed that a plant community underwent a predictable series of developmental stages that was comparable to the development of an organism. The final stage or climax community was determined by the climatic conditions of a geographic area. For Clements, the plant community was, in fact, a “complex organism” with a physiology that could be studied with the same precision as an organism in the laboratory. These organismal ideas were both influential and controversial during Clements’s lifetime. They focused considerable attention on plant succession as a major research area for American ecologists during the early decades of the twentieth century, when the discipline was becoming established. Although widely rejected by later ecologists, Clements’s organicism and physiological perspective persisted in attenuated form even after World War

Answer:

7.53×10^23

Explanation:

i dont know how

Answer:

There are 6.25×10²³ atoms in 1.25 moles of Zn

Answer:

1: C

2: A

3: B

4: I

5: G

6: H

Explanation:

Please don't crucify me if I'm wrong ;-;

Gasoline blending in petroleum refineries involves analyzing the properties of different components and determining the optimal mixing ratios to produce gasoline that meets specific octane rating and quality requirements.

Gasoline blending is a critical process in petroleum refineries where different components are combined to produce the desired gasoline product. In this example, the challenge is to blend gasoline from three different components.

To solve the gasoline blending problem, various factors need to be considered such as the desired octane rating, volatility, and environmental regulations. The first step is to determine the optimal proportion of each component based on their individual characteristics. This involves analyzing the properties of each component, such as its research octane number (RON), motor octane number (MON), and vapor pressure.

The second step is to develop a blending strategy that achieves the desired gasoline specifications. This involves determining the appropriate mixing ratios of the three components to meet the target octane rating and other quality requirements. The blending process requires precise calculations and adjustments to ensure the final gasoline product meets the desired specifications.

Additionally, economic considerations play a role in gasoline blending. The cost of each component and the market demand for specific gasoline grades can influence the blending decisions. Refineries aim to optimize the blend to minimize costs while meeting quality standards.

Learn more about Gasoline blending here:

https://brainly.com/question/13719873

#SPJ11

Answer:

c. F

Explanation:

As you go top to bottom down a column of the periodic table, atomic radius increases.

As you go left to right across a period of the periodic table, atomic radius decreases.

Knowing this trend, that means that the smallest atomic radius would be located in the top right of the periodic table. The closest element to that point is fluorine, or answer C.

To write the balanced complete molecular chemical equation and the balanced net ionic chemical equation, including phase labels, we need to first understand what they are .

Molecular chemical equation: A molecular equation is a chemical reaction equation where the reactants and products are expressed as molecules and the charges aren't shown. A molecular equation can show the reactants and products as solids, liquids, or gases with their states written in parenthesis after each molecule.

Net ionic chemical equation: The chemical equation in which all the spectator ions are removed is known as the net ionic chemical equation. The net ionic equation represents the actual chemical change taking place in the reaction. It demonstrates the substances and ions that actually take part in the chemical change.

Here is an example of how to write the balanced complete molecular chemical equation and the balanced net ionic chemical equation, including phase labels:

Example: Sodium chloride reacts with silver nitrate to form silver chloride and sodium nitrate.

Complete Molecular Chemical Equation:

NaCl(aq) + AgNO3(aq) → AgCl(s) + NaNO3(aq)

Balanced Net Ionic Chemical Equation:

Ag+(aq) + Cl-(aq) → AgCl(s) + Na+(aq) + NO3-(aq)

The phase labels used in the above equations are:aq: aqueous phase (dissolved in water)s: solid phase (precipitate)

learn more about molecular equation

https://brainly.com/question/29299745

#SPJ11

Answer:

A-Ideas

Explanation:

Answer: Gold Wire

Explanation:

Out of all of these options only gold wire is an element, elements are pure and cannot be broken down by any chemical means

hope it helped, good luck :)

Answer:

4.43 g

Explanation:

The reaction between sodium chloride and flourine gas is given as;

NaCl + F2 --> NaF + Cl2

From the stochiometry of the equation;

1 mol of NaCl reacts eith 1 mol of F2 to form 1 mol of NaF and Cl2

Mass of 1 mol of F2 = 38g

Mass of 1 mol of sodium flouride, NaF = 42g

This means 38g of flourine reacted with NaCl to form 42g of NaF

xg of F2 would form 4.9g of NaF

38 = 42

x = 4.9

x = 4.9 * 38 / 42

x = 4.43 g

The error that the student made was a) Not converting Celsius to Kelvin. To correctly calculate the molar mass, the temperature must be in Kelvin. To convert the temperature, add 273.15 to the Celsius value: 97.8°C + 273.15 = 370.95 K.

Option a is correct.

The student had the following data: mass of volatile liquid: 0.317 g, pressure: 1.076 atm, temperature C: 97.8, and volume of flask: 130.8 mL. From this data, the student calculated the molar mass to be 0.06857 g/mol.

However, the molar mass calculated by the student is impossible since hydrogen (H) has a molar mass of 1.008 g/mol. This error may have occurred due to the student's failure to convert Celsius to Kelvin, not converting the volume from mL to L, or using the wrong gas constant.

Converting Celsius to Kelvin is necessary because the gas laws require temperature to be in absolute units. To convert Celsius to Kelvin, we add 273.15 to the Celsius temperature. Therefore, the temperature of 97.8°C is actually 370.95 K.

Converting the volume from mL to L is necessary because the gas laws require volume to be in units of liters. To convert milliliters to liters, we divide the volume by 1000. Therefore, the volume of the flask is actually 0.1308 L.

Using the wrong gas constant is also a possibility. The gas constant is a constant that relates the pressure, volume, temperature, and number of moles of a gas. There are two commonly used gas constants, R and R'. The value of R is 0.08206 L atm/mol K, while the value of R' is 8.314 J/mol K. If the student used the wrong gas constant, this could have led to an incorrect calculation of the molar mass.


To know more about pressure visit:-

https://brainly.com/question/30673967

#SPJ11

In bonding, main group elements gain or lose electrons to attain the electronic configuration of the noble gas closest to them in the periodic table.

A noble gas is a type of chemical element that is highly unreactive and does not readily form compounds with other elements. The noble gases are located in Group 8 of the periodic table and include helium, neon, argon, krypton, xenon, and radon.

This process loosing or gaining electron, is an attempt to achieve a full valence shell of electrons, which is considered to be a stable electron configuration. By gaining or losing electrons, the main group elements can achieve the electron configuration of a noble gas and thus form stable compounds.

Learn more about bonding at:

https://brainly.com/question/25965295

#SPJ1

Answer:

Imo : Gas particles are in constant, random motion. The volume of gas particles is negligible in comparison to the volume of the container. There are no attractive forces between gas particles.

The distance between the gas molecules are far apart and they assume the volume and shape of their container.

The kinetic theory of gases states that gas molecules are in state of constant motion colliding with one another and with walls of the container.

Based on this theory, at an ideal condition the volume of the gas molecules are negligible and hence they take the shape of the containing vessel.

Thus, the distance between the gas molecules are far apart and they assume the volume and shape of their container.

Learn more about kinetic theory of gases here: https://brainly.com/question/2901837

STEM is an acronym meaning

Science

Technology

Engineering

Mathematics

One of the main focuses of STEM courses is on science, so you will be learning about various types of science

This is an approach at learning to have students learn all four types of subjects in one class, based on real world applications.

To determine the specific heat of a substance using the given information -

the formula q = m * C * ΔT, where q represents the heat energy transferred, m is the mass of the substance, C is the specific heat, and ΔT is the change in temperature, we can rearrange the formula to solve for C: C = q / (m * ΔT) Plugging in the values: q = 2520 J m = 10.0 k ΔT = (70.0°C - 10.0°C) = 60.0°C C = 2520 J / (10.0 kg * 60.0°C) Calculating the value C = 2520 J / (600.0 kg·°C) C ≈ 4.20 J/(g·°C) Therefore, the specific heat of the substance is approximately 4.20 J/(g·°C).

learn more about:- specific heat of a substance here

https://brainly.com/question/21184946

#SPJ11

If the half-life of radium-226 is 1599 years, then 0.46875 milligrams of a 15.0 mg sample of radioactive material are still present after 7995 years.

7995/1599 = 5

Since the half-life of radius 226 is 1599 years, 5 half-lives will have elapsed after 7995 years.

The length of time it takes for a sample of radium-266 to multiply or divide in half is known as its half-life.

The mass of radium -266 takes 4 half-lives to reduce by half five times, or multiply by (1/2)5 (1/2)5 = 1/32.

this indicates that only 1/32 of the initial sample will remain after 5 half-lives.

1/32 ×15.0 mg = 0.46875 mg

To know about half life

https://brainly.com/question/24710827

#SPJ4

The complete question is

How many milligrams of a 15.0 mg sample of radium-226 remain after 6396 years if the half-life of radium-226 is 1599 years?