a concentric tube heat exchanger having an area of 100 m2 is used to heat 5 kg/s of water that enters the heat exchanger at 50oc. the heating fluid is oil having a specific heat of 2.1 kj/kg and a flow rate of 8 kg/s. the oil enters the exchanger at 100oc and the overall heat transfer coefficient is 120 w/m2k. calculate the exit temperature of the oil and the heat transfer if the exchanger operates in a counterflow mode
Answers
In a concentric tube heat exchange with an area of 100 m2, 5 kg/s of water enters at 50°C and is heated by oil with a specific heat of 2.1 kJ/kg and a flow rate of 8 kg/s. The oil enters the exchanges at 100°C, and the overall heat transfer coefficient is 120 W/m2K. Given that the exchange operates in counter flow mode, we can calculate the exit temperature of the oil and the heat transfer.
Since Q = m_oil * c_oil * (T_in_oil - T_out_oil), we can solve for T_out_oil: T_out_oil = T_in_oil - (Q / (m_oil * c_oil)).
The overall heat transfer coefficient (U) can be used to calculate Q: Q = U * A * ΔT_lm, where A is the heat exchanger area and ΔT_lm is the log mean temperature difference. For counterflow, ΔT_lm = [(T_in_oil - T_out_water) - (T_out_oil - T_in_water)] / ln((T_in_oil - T_out_water) / (T_out_oil - T_in_water)).
By solving the above equations simultaneously, we can determine the exit temperature of the oil and the heat transfer rate (Q). The resulting values will provide insight into the efficiency and performance of the concentric tube heat exchanger operating in counterflow mode.
For such more question on temperature
https://brainly.com/question/24746268
#SPJ11
Related Questions
Developer wishes to construct an office building of 10,000m2 gross floor area, of which 8,000 m2will be available for letting. The construction costs are estimated to be $6,000/m2. In addition, there are ancillary construction costs of $400,000 in laying roads and sewers to the building. Professional fees are estimated to total 13% of construction costs. Short-term finance is available at 16%. The expected rent is $3,000/m2 p.a. net. The developer wishes to see a return for risk and profit of 20% of development value. The pre-contract period is expected to be 6 months, the building work is estimated to take 15 months, and a period of 3 months has been allowed for letting. The developer intends to sell the completed and fully let development to a financial institution, and it is anticipated that an initial yield of 7% will be required. Within these parameters, the value of the site has to be established.
Answers
The value of the site is $10,472,000.
Here are the calculations:The total construction costs are:
$6,000/m2 * 10,000m2 + $400,000 = $64,000,000
The professional fees are:
$64,000,000 * 0.13 = $8,320,000
The total development costs are:
$64,000,000 + $8,320,000 = $72,320,000
The developer's return for risk and profit is:
$72,320,000 * 0.20 = $14,464,000
The total cost of the development is:
$72,320,000 + $14,464,000 = $86,784,000
The expected rent is:
$3,000/m2 * 8,000m2 * 12 months = $28,800,000
The initial yield is:
$28,800,000 * 0.07 = $2,016,000
The value of the site is:
$86,784,000 - $2,016,000 = $10,472,000
Read more about initial yield here:
https://brainly.com/question/14714924
#SPJ1
Which one of the following statements about powder metal(P/M) process is correct?A. P/M part final density is controlled by the initial compactionB. P/M tooling cost is lowC. P/M parts usually have low ductility unless special processing is used to achieve full densityD. The size of the die used in P/M should be as same as the size of the final product
Answers
C: "P/M parts usually have low ductility unless special processing is used to achieve full density" is correct about about metal(P/M) process .
The powder metallurgy (P/M) process involves compacting metal powder in a die using high pressure to produce a net-shaped product. The final density of the P/M part is determined by the initial compaction and the sintering process, which is performed at high temperature to increase the density. P/M tooling cost is generally higher than other metal forming methods due to the high precision and durability required for the dies used.
P/M parts typically have lower ductility compared to parts made by other metal forming methods unless special processing, such as heat treatment, is used to achieve full density. Therefore, statement C is correct. The size of the die used in P/M can vary depending on the size and shape of the final product, and there is no requirement for the die size to be the same as the final product size.
Option C is the correct answer:
You can learn more about metal(P/M) process at
https://brainly.com/question/31412099
#SPJ11
Types of fuel line connections include all of the following, except what
Answers
The types of fuel line connections include compression fittings, flare fittings, quick-connect fittings, and barbed fittings. Compression fittings are used to connect two fuel lines by compressing a ferrule around the line and creating a tight seal.
Flare fittings involve flaring the end of the fuel line and using a flare nut to connect it to another line. Quick-connect fittings allow for easy and quick connections and disconnections of fuel lines. Barbed fittings have barbs that grip the inside of the fuel line to create a secure connection.
Fuel line connections typically include various types, such as barbed fittings, AN (Army-Navy) fittings, and quick-disconnect fittings. However, compression fittings are not commonly used in fuel line connections due to their susceptibility to leaks and less reliable connections compared to other fitting types.
To know more about flare fitting visit:
https://brainly.com/question/16806314
#SPJ11
Unfiltered full wave rectifier with a 120 V 60 Hz input produces an output with a peak of 15V. When a capacitor-input filter and a 1k ohm load are connected the DC output voltage is 14V. What is... The value of the capacitor? The value of the peak to peak ripple voltage?
Answers
Answer:
\(V_{pp}=2V\)
Explanation:
Source Voltage \(V= 120V\)
Frequency \(f=60Hz\)
Peak output voltage \(Vp=15V\)
Peak Output Voltage with filter \(V_p'=14V\)
Generally the equation for Peak to peak voltage is mathematically given by
\(V_p'=V_p-\frac{V_{pp}}{2}\)
Therefore
\(V_{pp}=2(V_p-v_p')\)
\(V_{pp}=2(15-14)\)
\(V_{pp}=2V\)
When an arbitrary substance undergoes an ideal throttling process through a valve at steady state, (SELECT ALL THAT APPLY) inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet pressures will be equal. inlet and outlet mass flowrates will be equal. inlet and outlet specific enthalpies will be equal. inlet and outlet temperatures will be equal.
Answers
Answer:
15x
Explanation:
The values of four out of a sample of five deviations are: -5, +2, +4, -2. What is The value of the fifth deviation?
Answers
Answer:
The fifth deviation is +1
Explanation:
Given
\(Deviations = -5, +2, +4,-2\)
Required
Determine the fifth deviation
Represent the fifth deviation with x.
As a theorem, the sum of deviations from mean is always 0.
So, we have:
\(-5 +2 +4-2+x = 0\)
\(-1+x = 0\)
Add 1 to both sides
\(1 -1+x = 0 +1\)
\(x = 0 +1\)
\(x= +\ 1\)
Hence, the fifth deviation is +1
A circuit has two resistors in parallel, each resistor is 6 ohms. This circuit is connected to a single resistor of 6 ohms, to form a series-parallel circuit. What is the total resistance of the circuit?
Answers
The tatal resistance of the series-parallel circuit with two resistor connected in parallel which combination is connected in series to a single resistor is 9 ohms.
What is a resistance?
This can be defined as the opposition to current flow in a circuit.
To calculate the total resistance, first we need to find the total resistance of the parallel resistor.
For parallel,
R' = (R₁R₂)/(R₁+R₂)............Equation 1Where:
R' = Total resistance of the parallel resistor.
From the question,
Given:
R₁ = 6 ohmsR₂ = 6 ohmsSubstitute these values into equation 1
R' = (6×6)(6+6)R' = 3 ohms.Finally, we combine the effective parallel resistance in series to the single resistance to the the total resistance of the circuit.
Rt = R'+R₃.................. Equation 2Where:
Rt = Total resistance of the circuit.From the question,
R' = 3 ohmsR₃ = 6 ohmsSubstitute these values into equation 2
Rt = 3+6Rt = 9 ohms.Hence, the total resistance of the circuit is 9 ohms.
Learn more about resistance here: https://brainly.com/question/28135236
#SPJ1
Question 3 20 pts Please calculate the speed-up of parallelization using Amdahl's Law given: The resources that can be parallelized takes up 78% of the overall resources. The part that can be improved will be THREE times as fast. Please round your answer to two decimal places.
Answers
In parallel computing, Amdahl's law is mainly used to predict the theoretical maximum speedup for program processing using multiple processors.
What is the formula for Amdahl’s law?Speedup MAX is equal to 1/(1-p)+(p/s)
Maximum performance boost is Speedup MAX.
s is the performance gain factor of p once the improvements are put into place.
The section whose performance has to be enhanced is denoted by p.
For instance, if a system's performance can be doubled and the portion that can be increased represents 30% of the overall system, then
SpeedupMAX is equal to 1/((1-0.30)+(0.30/2)).
= 1.18
Now, in a different illustration, if a system's performance can be doubled and the portion that can be increased makes up 70% of the entire system, then
Speedup MAX is equal to 1/((1-0.70)+(0.70/2))
= 1.54
Amdahl's law, named after a computer architect named Gene Amdahl and his work in the 1960s, is a law showing how much latency can be taken out of a performance task by introducing parallel computing.
To learn more about Amdahl's law refer to:
https://brainly.com/question/28274448
#SPJ4
T/F: Fiber optic network designers should have a knowledge of electrical power systems and hardware as well as communications design.
Answers
True, fiber optic network designers should have knowledge of electrical power systems and hardware as well as communications design.
This is because they are responsible for designing and implementing networks which use fiber optic cables to transmit data and information over long distances.
In addition to understanding the properties of light and how it interacts with the fiber optic cable, designers must understand how to integrate the fiber optic network into the overall electrical system of a building or facility.
Which includes knowledge of power distribution, grounding, and other electrical hardware components that are necessary for the proper operation of the network.
The statement is True.
Learn more about Fiber optic here;
https://brainly.com/question/32284376
#SPJ4
how would i be able to make a simple mechanism that will feed my bird in a pull of a lever, and know when to refill itself?
Answers
Answer: Take two cups. ...
Tie a string to one hole on a cup, then thread it through the hole on one end of a stick.
Tie the end of the string to the other hole in that cup.
Now, take the second cup. ...
Hold the stick on its side, with the cups hanging down. ...
Put weights in the cups to balance.
Explanation:
Q1: You have to select an idea developing an application like web/mobile or industrial, it should be based on innovative idea, not just a simple CRUD application. After selecting the idea do the following: 1) How your project will be helpful and what problem this project addresses. (10-Marks) 2) Write down the requirements. (10Marks) 3) List the functional and non-functional requirements of your project. (10marks) 4) Which process model you will follow for this project and why? (10marks) 5) Draw the Level 0, and level 1 DFD of your application. (20marks)
Answers
Answer:
Creating an app is both an expression of our self and a reflection of what we see is missing in the world. We find ourselves digging deep into who we are, what we would enjoy working on, and what needs still need to be fulfilled. Generating an app idea for the first time can be extremely daunting. Especially with an endless amount of possibilities such as building a church app.
The uncertainty has always spawned a certain fear inside creators. The fear of creating something no one will enjoy. Spending hundreds of dollars and hours building something which might not bring back any real tangible results. The fear of losing our investment to a poor concept is daunting but not random. But simple app ideas are actually pretty easy to come by.
Great app idea generation is not a gift given to a selected few, instead, it is a process by which any of us are able to carefully explore step by step methods to find our own solution to any problem. Whether you are a seasoned creator or a novice, we have provided a few recommendations to challenge and aid you as you create your next masterpiece.
if I am right then make me brainliest
(a) (0) What is the maximum positive number that can be stored in 8-bit 2's complement form (ii) Convert +97 and 58 into 8-bit 2's complement form (ii) Perform the 2's complement calculations for 97 +58 and 97 – 58, show your working (iv) Using your calculations as examples, show how an overflow can be detected [10 marks] (b) () Write the numbers 12457 and 2987 in BCD format (ii) Perform the calculation 12457 +2987 using BCD arithmetic. Show your working [10 marks)
Answers
For the first question, the maximum positive number that can be stored in 8-bit 2's complement form is 0111 1111.
This is because in 2's complement notation, the first bit is used as a sign bit, with 0 being positive and 1 being negative. Therefore, the largest positive number that can be represented with 8 bits is when all the bits except the sign bit are set to 1, which is 0111 1111.
For the second part, to convert +97 into 8-bit 2's complement form, we start by converting 97 into binary: 1100 0001. Since 97 is positive, we simply add a leading 0 to indicate that it is a positive number. The 8-bit 2's complement form of +97 is therefore 0110 0001.
To convert 58 into 8-bit 2's complement form, we first need to determine the 2's complement of 58. To do this, we invert all the bits of 58 (0011 1010), which gives us 1100 0101. We then add 1 to this result to get the 2's complement, which is 1100 0110. Since 58 is positive, we simply add a leading 0 to indicate that it is a positive number. The 8-bit 2's complement form of +58 is therefore 0011 0110.To perform the 2's complement calculation for 97 + 58, we first add the two numbers together in binary: 1100 0001 + 0011 0110 = 1111 0111. We then check the sign bit of the result to see if there was an overflow. In this case, the sign bit is 1, which indicates that there was an overflow.For 97 - 58, we first need to calculate the 2's complement of 58, which is 1100 0110. We then add 97 and -58 (i.e., the 2's complement of 58) together in binary: 1100 0001 + 1100 0110 = 1000 0111. We then check the sign bit of the result to see if there was an overflow. In this case, the sign bit is 0, which indicates that there was no overflow. Overflow can be detected by checking the sign bit of the result. If the sign bit of the result is different from the sign of the operands, then an overflow has occurred. In other words, if adding two positive numbers results in a negative number or if adding two negative numbers results in a positive number, then an overflow has occurred.
BCD stands for Binary Coded Decimal and is a way of representing decimal numbers using binary digits. In BCD, each decimal digit is represented by a group of 4 binary digits. For example, the decimal number 12457 can be represented in BCD as 0001 0010 0100 0101 0111, where each group of 4 bits represents a decimal digit. Similarly, the decimal number 2987 can be represented in BCD as 0010 1001 1000 0111.To perform the calculation 12457 + 2987 using BCD arithmetic, we start by adding the rightmost digits together. In this case, they are both 7, so we have 7 + 7 = 14. Since 14 is greater than 9, we need to carry the 1 over to the next digit. The next two digits are 5 and 8, so we have 5 + 8 + 1 = 14. Again, we need to carry the 1 over to the next digit. The next two digits are 4 and 9, so we have 4 + 9 + 1 = 14. Once again, we need to carry the 1 over to the next digit. The next two digits are 2 and 2, so we have 2 + 2 + 1 = 5. Therefore, 12457 + 2987 = 15444 in BCD format.
To know more about Binary Coded Decimal visit:
brainly.com/question/31495131
#SPJ11
the computations based upon the quantum mechanics model take longer and are more rigorous.
Answers
The computations based upon the quantum mechanics model take longer and are more rigorous is true.
Why is quantum mechanics so complicated?The most difficult area of physics is regarded as quantum mechanics. Systems with quantum behavior do not behave according to the usual laws; they are difficult to see and feel, they can have contentious properties; they can exist in multiple states simultaneously; and others,
Therefore, the mathematical terms that provide a thorough explanation of quantum mechanics are known as quantum mechanical mathematical formulations. This mathematical formalism primarily makes use of linear spaces called Hilbert spaces, a subset of functional analysis.
Learn more about quantum mechanics model from
https://brainly.com/question/11852353
#SPJ1
the computations based upon the quantum mechanics model take longer and are more rigorous. true or false.
What term describes a catalytic converter as it reaches its effective temperature?
Answers
an employee is having trouble with a current project and needs help.
Answers
Answer:
What ! you are an Engineer and I am a High school why are You in my feed..!!
5. For what purpose do we employ the "double-truck live load model"?
6. Why do we employ dynamic impact factor to the live load model?
Answers
5.The "double-truck live load model" is employed for the purpose of determining the maximum load that a bridge or structure can sustain. It is a method used in structural engineering to analyze the stress and deflection caused by the passage of a double-truck vehicle on a bridge.
By considering the weight distribution, axle spacing, and dynamic effects of the double-truck vehicle, engineers can assess the structural integrity and ensure that the bridge or structure is designed to withstand the anticipated loads and remain safe for public use.
6.The dynamic impact factor is employed in the live load model to account for the additional dynamic effects that occur when a moving load traverses a structure.
As a vehicle or load moves across a bridge or structure, it causes dynamic vibrations and oscillations due to its motion and interaction with the structure.
The dynamic impact factor takes into consideration these dynamic effects and amplifies the live load to ensure the structural design can withstand the combined static and dynamic loads imposed by moving vehicles or loads.
For more such questions on load,click on
https://brainly.com/question/13533992
#SPJ8
A v-6 is being checked for starter amperage draw. the initial surge current was about 210 amperes and about 160 amperes during cranking. Technician A says the starter is defective and should be replaced because the current flow exceeds 200 amperes. Technician B this is normal current draw for a starter motor on a V-6 .Which technician is correct?
Answers
According to the scenario mentioned in the question, technician B is correct.
What is Amperage draw?Amperage draw may be defined as a kind of measurement of the power that is significantly being consumed by a blower motor in order to migrate the air through your HVAC system.
When a v-6 motor is being checked for starter amperage draw, it is found that the initial surge current was about 210 amperes and about 160 amperes during cranking. Technician B is correct because he reveals that it is the normal current that draws for a starter motor on a V-6.
Therefore, through this statement, it may assume that technician B is absolutely correct.
To learn more about Amperage, refer to the link:
https://brainly.com/question/13489109
#SPJ1
Select the correct answer.
Which chemical can you use to assist with your motor fuel needs?
O A.
ethylene glycol
OB.
ethanol
O c.
butanol
OD.
pentanol
O E.
propranolol
Reset
Next
Answers
Answer: Ethanol
Explanation:
What arethe two tag codes for performing ordered and un ordered lits using HTML
Answers
Answer:
The HTML ul tag is used for the unordered list. There can be 4 types of bulleted list: To represent different ordered lists, there are 4 types of attributes in <ul> tag. This is the default style. In this style, the list items are marked with bullets.
Answer:
Ordered
\({ \tt{ < ol > .... < / ol > }}\)
Unordered
\({ \tt{ < ul > .... < /ul > }}\)
if the aircraft's transponder fails during flight within class b airspace,
Answers
If the aircraft's transponder fails during flight within Class B airspace, the pilot should immediately notify air traffic control (ATC) using the appropriate radio frequency, follow any instructions given by ATC, and adhere to established procedures for aircraft without a functioning transponder.
What should a pilot do if the transponder on their aircraft malfunctions while flying within Class B airspace?In the event of a transponder failure while in Class B airspace, it is crucial for the pilot to take immediate action. The first step is to promptly notify air traffic control (ATC) of the situation using the designated radio frequency. This communication ensures that ATC is aware of the transponder failure and can provide necessary guidance and instructions. The pilot should then comply with any directives given by ATC, which may include specific altitude or heading instructions.
Additionally, the pilot must adhere to established procedures for aircraft operating without a functioning transponder within Class B airspace. These procedures typically involve maintaining vigilance, flying predictable patterns, and using visual signals as necessary to communicate with other aircraft.
Learn more about Air traffic control
brainly.com/question/2106452
#SPJ11
Technician A states that about 33% of the heat energy created is wasted by being dumped straight out
of the exhaust to the atmosphere. Technician B states that 33% is wasted by internal friction and from
radiating off hot engine components straight to the atmosphere. Who is correct?
Select one:
A. Technician A
B. Technician B
C. Both A and B
D. Neither Anor B
Answers
Heat energy is the known to be a product of the movement of tiny particles called atoms, molecules or ions. The true statement is by Technician A.
Internal combustion engine is dependent on the heat of combustion so as to make torque to move the vehicle and power the system.
A lot of heat made during combustion is not often used productively and therefore need to be removed to avoid overheating of the engine.
The heat energy that is not used for is wasted in three ways: They are:
About 33% is wasted by being dumped straight out of the exhaust to the atmosphere. About 33% is wasted by the cooling system, which prevents overheating of the engine components. About 5% is wasted by internal friction and from radiating off of hot engine components straight to the atmosphere.Learn more from
https://brainly.com/question/14566159
a1 (driving gear) has 40 teeth and a2 (driven gear) has 82 teeth. if a1 rotates 10 teeth, how many degrees does a2 rotate?
Answers
Given that gear a1 has 40 teeth and gear a2 has 82 teeth, if a1 rotates by 10 teeth, the calculation can be made to determine the corresponding rotation in degrees for gear a2. The result is that a2 will rotate by approximately 24.39 degrees.
The number of teeth on a gear is directly proportional to the angular b it undergoes. In this case, the gear a1 has 40 teeth, while gear a2 has 82 teeth. To calculate the rotation of gear a2 when a1 rotates by 10 teeth, we can use the concept of the gear ratio.
The gear ratio can be determined by dividing the number of teeth on the driven gear (a2) by the number of teeth on the driving gear (a1). In this case, the gear ratio is 82/40 = 2.05.
Since a1 rotates by 10 teeth, we can multiply this value by the gear ratio to find the corresponding rotation of a2. Thus, 10 teeth on a1 correspond to 10 * 2.05 = 20.5 teeth on a2.
To convert teeth to degrees, we can assume that each tooth corresponds to an equal angle. Therefore, the rotation of a2 can be calculated by multiplying the number of teeth on a2 (20.5) by the angle corresponding to each tooth. In this case, the angle per tooth is 360 degrees divided by the number of teeth on a2, which is 360/82 = 4.39 degrees per tooth.
Therefore, a2 will rotate by approximately 20.5 * 4.39 = 90 degrees when a1 rotates by 10 teeth.
Learn more about gear ratio here:
https://brainly.com/question/9614334
#SPJ11
What is the total resistance of this circuit in ohms? 10k-ohms,5k-ohms,3k-ohms,36v,
Answers
Answer:
If you know the total current and the voltage across the whole circuit, you can find the total resistance using Ohm's Law: R = V / I. For example, a parallel circuit has a voltage of 9 volts and total current of 3 amps. The total resistance RT = 9 volts / 3 amps = 3 Ω.
Explanation:
An aircraft repair shop employs 12 people in engine overhaul, 27 in aircraft overhaul, 8 on engine operational checks, 4 on airframe operation checks, 3 inspectors, 2 welders and a foreman. What is the total number of employees? 2. A Boeing 747 aircraft has a fuel load of 25 tons, 300 passengers with an average weight of 170lbs., 40000lbs. of cargo and the empty weight of the aircraft is 300000 lbs. What is the gross weight of the aircraft? 3. A drilled hole is 1.250 inches in diameter. The bolt for the hole must be made .003 inches smaller than the hole. What is the diameter of the bolt? 4. Twenty tires are to be mounted on aircraft wheels that have nine bolt holes per wheel. Each bolt requires one nut and two washers. Upon inspection of the old hardware, there is found to be eighty five bolts, fifty nuts and 100 washers that may be reused. The rest will will have to be drawn from stock. How many of each will have to be issued from stock? 5. A piece of tubing 18 inches long is cut into 4 pieces. The first piece is 3 inches long, the second is 2 inches and a third piece is 6 inches. Each saw cut is 1/16 inch wide. What is the length of the remaining piece?
Answers
1. Total Number of Employees in Aircraft Repair Shop = Number of People in Engine Overhaul + Number of People in Aircraft Overhaul + Number of People on Engine Operational Checks + Number of People on Airframe Operation Checks + Number of Inspectors + Number of Welders + Number of Foreman= 12 + 27 + 8 + 4 + 3 + 2 + 1= 57 employees.
2. The weight of an empty Boeing 747 is 300000 pounds, fuel load is 25 tons = 50,000 pounds, 300 passengers with an average weight of 170 pounds = 51,000 pounds, 40000 pounds of cargo = 40000 pounds
. So, Gross Weight of Aircraft = Empty Weight + Fuel Load + Passengers Weight + Cargo= 300000 + 50000 + 51000 + 40000= 441,000 pounds.
3. The diameter of the drilled hole is 1.250 inches, so the diameter of the bolt for the hole should be 1.250 inches – 0.003 inches = 1.247 inches.
4. Each tire will have 9 bolts, 1 nut, and 2 washers.
As per the given data, there are 85 bolts, 50 nuts, and 100 washers which can be reused.
Therefore, the total number of bolts, nuts, and washers required for 20 tires are:
Bolts required for 20 tires= Total number of bolts required – bolts which can be reused= (20 × 9) – 85= 35 nuts required for 20 tires= Total number of nuts required – nuts which can be reused= (20 × 9) – 50= 100 washers required for 20 tires= Total number of washers required – washers which can be reused= (20 × 9 × 2) – 100= 260.
So, 35 bolts, 100 nuts, and 260 washers will have to be issued from stock.
5. The piece of tubing of 18 inches is cut into 4 pieces. The saw cut is 1/16 inch wide. So, 4 saw cuts are 4 × 1/16 = 1/4 inch. The total length of the pieces after cutting = 3 + 2 + 6 + 1/4= 11.25 inches.
Therefore, the length of the remaining piece of tubing = 18 – 11.25= 6.75 inches.
Learn more about average weight at
https://brainly.com/question/1504656
#SPJ11
What does the range switch prevent
Answers
There is an AC series circuit that is constructed of a 150.0-ohm resistor along with 300.0 ohm inductive reactance and 200.0 ohm capacitive reactance. What is the difference in phase between the current and resistor voltage of the circuit
Answers
Answer:
0°
Explanation:
The resistor voltage has the same phase as the circuit current. There is no phase difference.
Answer:
0° (zero degree)Explanation:
the difference in pjase between the current and resistor voltage of the given 150.0 ohm, 300.0 ohm and 200.0 ohmAnswer every question of this quiz
Please note: you can answer each question only once.
Which number shows the intake valve?
OK
Answers
I'd say number 4, number 3 looks like an exhaust valve
tqm is an acronym meaning "total quality measurement." a. true b. false
Answers
Answer:
True
Explanation:
TQM is an acronym meaning "total quality measurement."
NMB= name me brainiest.
The statement is false. TQM is an acronym for "Total Quality Management," not "Total Quality Measurement."
Total Quality Management (TQM) is a management approach focused on continuously improving the quality of products, services, and processes within an organization. It emphasizes the involvement of all employees and aims to create a culture of quality throughout the entire organization.
TQM encompasses various principles and practices, including customer focus, continuous improvement, employee empowerment, and data-driven decision-making. It involves the systematic management of quality across all aspects of an organization, from product design and production to customer service and support.
While measurement is an important component of TQM, it is not the sole focus. TQM emphasizes a holistic approach to quality management, encompassing not only measurement but also process improvement, customer satisfaction, employee involvement, and other factors that contribute to overall organizational excellence.
Therefore, the statement that TQM stands for "Total Quality Measurement" is incorrect. The correct expansion of TQM is "Total Quality Management."
To learn more about component click here
brainly.com/question/31183829
#SPJ11
Determine all possible causal stable transfer functions H(z) with a square-magnitude function given by ∣∣H(ejω)∣∣2=(1.36+1.2cosω)(1.64+1.6cosω)9(1.0625+0.5cosω)(1.49−1.4cosω) (Hint: Note that ∣∣H(ejω)∣∣2=H(z)H(z−1)∣∣z=ejω. You may find it helpful to first determine H(z)H(z−1), and then identify the causal and stable factor H(z).)
Answers
The possible causal and stable transfer functions H(z) can be determined by manipulating the square-magnitude function and expressing it as a product of two factors, H(z) and H(z-1), and then identifying the causal and stable factor H(z).
What are the possible causal and stable transfer functions H(z) that satisfy the given square-magnitude function?To determine all possible causal stable transfer functions H(z) with the given square-magnitude function, we can follow these steps:
Step 1: Given that ∣∣H(ejω)∣∣^2 = (1.36 + 1.2cosω)(1.64 + 1.6cosω)^9(1.0625 + 0.5cosω)(1.49 - 1.4cosω), we can rewrite it as:
∣∣H(ejω)∣∣^2 = H(z)H(z^-1)∣∣z=ejω
Step 2: Multiply both sides by z^-1:
H(z)H(z^-1) = (1.36 + 1.2cosω)(1.64 + 1.6cosω)^9(1.0625 + 0.5cosω)(1.49 - 1.4cosω)z^-1
Step 3: Rearrange the equation to solve for H(z):
H(z) = (1.36 + 1.2cosω)(1.64 + 1.6cosω)^9(1.0625 + 0.5cosω)(1.49 - 1.4cosω)z^-1 / H(z^-1)
Step 4: Simplify the equation and identify the causal and stable factor H(z):
By analyzing the given equation, we can identify the causal and stable factors of H(z) by separating the terms that have positive powers of z and those with negative powers of z.
The causal and stable factor can be expressed as a ratio of polynomials in z, where the numerator includes the positive powers of z and the denominator includes the negative powers of z.
Step 5: Perform any additional simplification or factorization required based on the specific values and expressions provided in the square-magnitude function.
Learn more about transfer functions
brainly.com/question/31326455
#SPJ11
How can technology interfere with good study habits?
Answers
Answer:
the third anwser is right on edgeinuity
Explanation:
Answer:
Technology can pull students’ focus away from their tasks.
Explanation: