a 1.50 g sample of hydrocarbon undergoes complete combustion to produce 4.40 g of co2 and 2.70 g of h2o. what is the empirical formula of this compound? in addition, its molecular weight has been determined to be about 78. what is the molecular formula?

2 and 1 coefficients should be used to balance the skeleton equation for the formation of sodium oxide.

To balance the skeleton equation for the formation of sodium oxide, the following coefficients should be used:

Na + O ---> Na2O

This equation shows that 2 moles of sodium react with 1 mole of oxygen to produce 2 moles of sodium oxide. The coefficients 2 and 1 ensure that the number of atoms of each element is balanced on both sides of the equation.

Chemical formulas and symbols used in chemical equations are used to represent chemical reactions symbolically. The reactant entities are supplied on the left, and the product entities are given on the right, with a plus sign separating the entities in both the reactants and the products, and an arrow pointing in the direction of the products to show the direction of the reaction. Chemical equations can be either mixed, structural or both. Coefficients are displayed next to the symbols and formulas of the various entities, together with the absolute values of the stoichiometric numbers.

To know more about sodium oxide please refer: https://brainly.com/question/29093629

#SPJ4

Answer:

I say 20 is ur best option

a. dinitrogen oxide (N2O)

O=16.00g

N=14.00g * 2 = 28.00g

So NO2 = 44.00g

You have 100g of NO2, you need moles.

So:

100g of NO2 x 1 mol NO2/44g of NO2 = your answer

b. All right. So let's go ahead and convert our 100 grams of stuff. Two moles. So starting with, we have 100 grams, uh, and 20 times we know we're gonna have one more on the top. We need the molar mass. So if we look at our periodic table, nitrogen has a molar mass of 14 point. Oh, sevens will multiply that by two. Since we have two nitrogen in our compound plus 15.999 your period table might be slightly different. That's okay. Just stay consistent with your numbers. If we add those together, we should get 44 point no. 13 grams for everyone. Mole. That's why it's ah conversion factor of the inner calculator and get 2.27 moles into right. And then, um, we have 100 grams of other substance teach your each times we know our one mole from the conversion factor will be on the tops. Wouldn't do that now and then. Carbon 12.1 Um, options. 15.99 and then hydrogen is one point 08 So I had all those together multiply by our sub scripts and get 32 point go for two calculate. That would be 3.12 moles of C H 30 H for the same mass. What this means is that CH. 30 H husband It contains more moles than in 20

Translation   is the process of converting the language of the nucleic acids that is nucleotides to the language of proteins that is amino acids.

The process of the conversion of the nucleic acids that is nucleotides to the language of proteins that is amino acids is called as the translation. In the translation process , the strands of the protein is produced from mRNA molecule. The mRNA is the nucleic acid molecule which formed by the help of the multiple nucleotides that is present together.

The formation of the protein strands is the process of the protein synthesis. It is based on the sequence of mRNA molecule.

To learn more about nucleic acid here

https://brainly.com/question/10870566

#SPJ4

Answer:

I think it is A

Explanation:

A.They study how to make plants produce certain chemicals

a. After sequence of instructions (mov al, 0D4h; shr al, 1), value of AL is 6Ah. b. After sequence of instructions (mov al, 0D4h; sar al, 1), value of AL is EAh. c. After sequence of (mov al, 004h; sar al, 4), value of AL is 000h. d. After sequence of instructions (mov al, 004h; rol al, 1), value of AL is A9h.

Let's go through each instruction and show the value of AL after each shift or rotate instruction has executed: a. mov al, 0D4h AL = 0D4h shr al, 1 Right shift (shr) divides the value by 2, discarding the least significant bit and shifting all other bits to right.

AL after shr = 6Ah b. mov al, 0D4h AL = 0D4h sar al, 1 Arithmetic right shift (sar) preserves the sign bit (the most significant bit) and shifts all bits to the right.

AL after sar = EAh c. mov al, 004h AL = 004h sar al, 4 AL after sar = 000h Note: Since the original value of AL is 004h (which is 4 in decimal), after shifting all bits to the right by 4 positions, the resulting value is 000h (which is 0 in decimal).

d. mov al, 004h AL = 004h rol al, 1 Left rotate (rol) shifts all bits to the left by 1 position, and the bit that gets shifted out from the most significant end is rotated back to the least significant end. AL after rol = A9h

Know more about bit here:

https://brainly.com/question/31991040

#SPJ11

Answer:

I think its b be ause it looks like a better answer and it has some detail to it

Answer:

yes ?

Explanation:

from what I have learned so far, the hair gradually gets thinner and thinner with less oxygen which would change the pressure

In the Haber Process, Ammonia is created. The balanced reaction is as follows: 3H2 + N2 ⇒ 2NH3. The reaction is decomposition reaction. Therefore, option A is correct.

A decomposition reaction occurs when a compound is broken down into two or more simpler substances. A decomposition reaction has the general form: ABA+B. The majority of decomposition reactions require an energy input in the form of heat, light, or electricity.

Carbonates are broken down into carbon dioxide and an oxide. Chlorate is broken down into oxygen gas and chloride. Water and an oxide are formed when hydroxides decompose. Water and a molecular oxide are formed when oxygen-containing acids decompose.

Thus, option A is correct.

To learn more about the decomposition reaction, follow the link;

https://brainly.com/question/16987748

#SPJ1

A woman with a molar pregnancy at risk for disseminated intravascular coagulation (DIC) beacuse (a) molar tissue releases chemicals that raise clotting factors. When cells that would typically develop into a foetus grow abnormally in the uterus, it is known as a molar pregnancy.

When cells that would typically develop into a foetus grow abnormally in the uterus, it is known as a molar pregnancy. These cells develop into a lump or tumour that resembles a cluster of grapes during a molar pregnancy. The placenta in this tissue is abnormal and the pregnancy is not viable.

"Procoagulants" are chemicals that molar tissue releases into the blood. Procoagulants are chemicals that help blood clot. Disseminated intravascular coagulation (DIC), a medical disease wherein tiny blood clots form all over the body and cause the depletion of clotting factors and platelets, can be brought on by the release of these substances.

Hence, this may result in irregular bleeding and it may aslo lead to damage of organs.

To know more pregnancy : brainly.com/question/28547022

#SPJ4

Answer:

increase the temperature

Explanation:

if you increase the temperature, the dissolving rate time will decrease.

The procedures that can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1 is by increasing the temperature. Therefore, the correct option is option D.

A solute dissolves together into solvent during the process of dissolution, creating a solution. We are aware that the collisions between the molecules of the solvent and the particles inside the solid crystal are what cause a solid to dissolve in water.

The pace of dissolution will rise if anything is done to make such collisions happen more frequently or with more energy. Consider attempting to dissolve little sugar in a cup of tea. A cube of sugar would dissolve more slowly than a packet of powdered sugar. Stirring or stirring the solution would speed up the rate of dissolution. The procedures that can be performed on trials 2 and 3 so that the rate of dissolving is the same as trial 1 is by increasing the temperature.

Therefore, the correct option is option D.

To know more about rate of dissolution, here:

https://brainly.com/question/2459213

#SPJ2

The pressure of the gas inside the cylinder is 52.90 atm

Given is the number of moles of gas, the temperature and the volume of the gas and we need to find the pressure of the gas inside the cylinder, for this we can use the ideal gas law equation:

PV = nRT

Where:

P = Pressure of the gas (in units of pressure, such as atm)

V = Volume of the gas (in liters)

n = Number of moles of the gas

R = Ideal gas constant (0.0821 L·atm/(mol·K))

T = Temperature of the gas (in Kelvin)

First, let's convert the temperature from Celsius to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Now we can substitute the values into the ideal gas law equation:

P × 12.5 L = 27.0 moles × 0.0821 L·atm/(mol·K) × 298.15 K

Simplifying the equation:

P × 12.5 L = 661.2587 L·atm

Dividing both sides by 12.5 L:

P = 661.2587 L·atm / 12.5 L

P ≈ 52.90 atm

Therefore, the pressure of the gas inside the cylinder is approximately 52.90 atm.

Learn more about ideal gas here:

https://brainly.com/question/15379358

#SPJ1

We can use the ideal gas law equation to determine the pressure of a gas within a cylinder:

PV = nRT

Where:

P is the pressure of the gas (in units of pressure, such as atm)

V is the volume of the gas (in units of volume, such as liters)

n is the number of moles of the gas

R is the ideal gas constant (0.0821 L·atm/(mol·K))

T is the temperature of the gas (in units of temperature, such as Kelvin)

we need to convert the temperature from Celsius to Kelvin:

T(K) = T(°C) + 273.15

T(K) = 25.0 °C + 273.15

T(K) = 298.15 K

Now we can plug the data into the ideal gas law equation as follows:

P * 12.5 L = 27.0 moles * 0.0821 L·atm/(mol·K) * 298.15 K

Simplifying the equation:

P = (27.0 moles * 0.0821 L·atm/(mol·K) * 298.15 K) / 12.5 L

Calculating the pressure:

P ≈ 5.046 atm

As a result, the gas inside the cylinder is under a pressure of about 5.046 atm.

Learn more about Ideal gas law equation, here:

https://brainly.com/question/3778152

#SPJ1

M = (moles of solute) / (volume of solution in liters)

To calculate the molarity of the chloride ion in the diluted solution of residue using the average volume, follow these steps:
1. Determine the average volume of the diluted solution: Add up the volumes of all the diluted samples and divide by the number of samples to get the average volume.

2. Calculate the moles of chloride ions: To do this, you'll need the initial concentration of chloride ions in the original solution (in mol/L) and the volume of the original solution before dilution (in L). Multiply the initial concentration by the original volume to get the moles of chloride ions.

3. Calculate the molarity of chloride ions in the diluted solution: Divide the moles of chloride ions calculated in step 2 by the average volume of the diluted solution obtained in step 1 (in L). The result will be the molarity of the chloride ions in the diluted solution.

Remember to use the appropriate units when performing calculations and to convert between units when necessary.

To know more about "Moles" refer here:

https://brainly.com/question/30759206#

#SPJ11

The activity after 26 days can be calculated as 1.1 x 10^4 cpm.

Radioactive is a type of energy that is emitted from certain elements when they undergo radioactive decay. Radioactive elements, such as uranium and radium, contain unstable atoms that are in a constant state of decay. When these atoms break apart, they release energy in the form of radiation.

The decay constant (k) of the sample can be calculated as follows:
k = ln(2.00 x 10^6/9.0 x 10^5) / 4.0
k = 0.073
Therefore, the activity after 26 days can be calculated as follows:
A = 2.00 x 10^6 e^(-0.073 x 26)
A = 1.1 x 10^4 cpm

To learn more about radioactive
https://brainly.com/question/25750315
#SPJ1

Answer:

The Brazilian Santos Dumont

Explanation:

Santos Dumont created the 14 Bis airplane, the first airplane to perform a flight through 200 meters im Paris, France, in 23 October 1906

Orville and Wilbur Wright were the first two to actually invent the aeroplane. These American brothers also designed and flew their first creation after making it in their bicycle shop in December 17, 1903.

I hope this helps! :)

Answer:

V2 = 0.941 L

Explanation:

This follows the Charles' law, a gas law.

Using this eq \(\frac{V1}{T1} =\frac{V2}{T2}\)

From the given, the missing variable is V2

\(\frac{752 ml}{298 K} =\frac{V2}{373 K}\), change ml to SI unit of Volume (L)

752 ml = 0.752 L

\(\frac{752 L}{298 K} =\frac{V2}{373 K}\), then cross multiply

\(280.496 L (K) =298K (V2)\)

\(\frac{280.496 L (K) }{298K} = (V2)\)

\(V2 = 0.941 L\)

Compound 1 is a stronger acid than Compound 2 because the anion of Compound 1 is better stabilized by Option A. resonance effect. This allows for the distribution of the negative charge over a larger area, making the anion more stable and the acid stronger.

This means that the negative charge on the anion of Compound 1 is spread out over multiple atoms, making it more stable and less likely to react with other molecules. In contrast, Compound 2 does not have this stabilization effect, making it a weaker acid. Dehydration, inductive effects, and hydrogen bonding do not play significant roles in determining the acidity of these compounds. Hence, the correct answer is A. Compound 1 is a stronger acid because the anion of Compound 1 is better stabilized by the resonance effect.

To know more about resonance effect click here:

https://brainly.com/question/30490931

#SPJ11

It could destroy the crops by jumping all over them

Answer:

The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).

Explanation:

The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).

Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.

Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.

Mathematically,

Density = Mass of the metal ball ÷volume marked on the graduated cylinder

North Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink. Here, water is very cold and salty which makes the water denser.

Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.

To know more about density, here:

https://brainly.com/question/16894337

#SPJ2

Answer:

C

Explanation:

just did it

It will now be 8.3L in volume.

Volume is the quantity of space a thing occupies, whereas capacity is a measure of the substance it can store, such as a solid, a liquid, or a gas. While capacity can be measured in virtually any other unit, such as liters, gallons, pounds, etc., volume is measured in cubic units.

Volume is the three-dimensional space inhabited by matter or encompassed by a surface, and it is measured in cubic units. The cubic meter (m3), a derived unit, is the SI unit of volume.

To know more about volume visit:

https://brainly.com/question/5633490

#SPJ1

Answer: the answer is 9.02

Explanation:

I figured the answer out because 273 x 2 equals 546 so I thought you had to multiply 4.51 x 2 and the answer is 9.02

To address the crevice corrosion issue in the high-pressure connectors and piping of the SWRO plant, several remedies can be considered, A SWRO (Sea Water Reverse Osmosis) plant is a water desalination facility that uses reverse osmosis technology to treat seawater or brackish water and produce freshwater

Material Selection: Evaluate the material compatibility with the operating conditions, especially the chloride ion concentration and temperature. Consider using corrosion-resistant alloys such as duplex stainless steel (e.g., 2205) or super duplex stainless steel (e.g., 2507) that have better resistance to chloride-induced corrosion compared to 316L or 317L stainless steel.

Surface Treatment: Apply appropriate surface treatments to enhance corrosion resistance. Passivation or pickling can remove surface contaminants and create a protective oxide layer on the metal surface, reducing the susceptibility to corrosion.

Design Modifications: Evaluate the design of the connectors and piping to minimize crevices and stagnant areas where corrosion can occur. Smooth transitions, avoiding sharp angles or crevices, can help promote better fluid flow and prevent the accumulation of corrosive substances.

Cathodic Protection: Implement cathodic protection methods, such as impressed current or sacrificial anodes, to protect the connectors and piping from corrosion. This technique involves introducing a more easily corroded metal (anode) to the system, which sacrifices itself to protect the connected metal (cathode) from corrosion.

Monitoring and Maintenance: Regularly monitor the corrosion levels and condition of the connectors and piping. Implement a maintenance program that includes periodic inspections, cleaning, and repairs, if necessary, to prevent corrosion from progressing.

It is important to consult with corrosion experts and engineers who specialize in SWRO plant operations to assess the specific conditions, perform material testing, and provide tailored solutions to mitigate the crevice corrosion problem effectively.

To know more about SWRO (Sea Water Reverse Osmosis), click here, https://brainly.com/question/31556553

#SPJ11

The best option which explains whether the initial potential of the second cell will be different from the initial potential of the first cell is "The initial potential of the second cell will be the same as the first cell because the ions from the salt bridge are not oxidized or reduced during cell operation."

This is because the salt bridge only provides a path for the flow of ions between the two half-cells. It does not participate in the redox reactions that occur in the half-cells. The choice of KNO3 or NaNO3 for the salt bridge does not affect the initial potential of the cell. The initial potential of a cell is determined by the difference in the standard reduction potentials of the two half-cells. If the half-cells are identical, then the initial potential of the two cells will be the same.

Therefore, the correct option is: The initial potential of the second cell will be the same as the first cell because the ions from the salt bridge are not oxidized or reduced during cell operation.

To know more about initial potential, refer here:

https://brainly.com/question/23819073#

#SPJ11

The initial potential of the second cell will be the same as the first cell because the ions from the salt bridge are not oxidized or reduced during cell operation.

This statement best explains whether the initial potential of the second cell will be different from the initial potential of the first cell.

What is a galvanic cell?

A galvanic cell, also known as a voltaic cell, is a device that transforms the chemical energy stored in a chemical reaction into electrical energy.

In other words, when a galvanic cell operates, chemical energy is transformed into electrical energy.

Two half-cells, separated by a salt bridge, make up a galvanic cell. Galvanic cells, for example, batteries, are commonly utilized in daily life to power equipment and appliances.

What is the definition of initial potential?

The initial potential of a galvanic cell is the electric potential difference (voltage) across its electrodes when the cell is first connected but before any current flows.

The electrodes in a galvanic cell are the two metals that are dipped into different electrolyte solutions.

The half-cell is a container of a particular metal dipped in a solution of its ions.

The presence of different salt bridges does not impact the initial potential of a galvanic cell. As a result, the initial potential of the second cell would be the same as the initial potential of the first cell.
Hence,

the statement "The initial potential of the second cell will be the same as the first cell because the ions from the salt bridge are not oxidized or reduced during cell operation" is correct.

To learn more about galvanic cell, visit:

https://brainly.in/question/16155237

#SPJ11

At the transition state, the leaving group is departing while the base is approaching the beta carbon to form a new pi bond. Increasing alkyl substitution of the double bond stabilizes the transition state and lowers the activation energy (Ea) for the reaction.

In an E2 reaction, the transition state represents the highest energy point along the reaction pathway. At the transition state, the leaving group is departing while the base is approaching the beta carbon to form a new pi bond. Increasing alkyl substitution of the double bond stabilizes the transition state and lowers the activation energy (Ea) for the reaction. This is because alkyl groups, being electron-donating, donate electron density towards the transition state, resulting in increased stability through hyperconjugation and inductive effects. The increased stability of the transition state makes it easier for the reaction to proceed, as less energy is required to reach the transition state. Consequently, the lower Ea leads to an increase in the rate of the reaction. This is due to the fact that a lower Ea allows for more reactant molecules to possess the necessary energy to overcome the barrier and proceed to product formation, resulting in a faster reaction rate.

For more question on activation energy

https://brainly.com/question/1380484

#SPJ8

The name of the compound made of magnesium and fluorine is magnesium fluoride and its formula is MgF2. Magnesium fluoride is a white crystalline solid that has a bitter taste and is insoluble in water. Magnesium fluoride is a stable ionic compound with a high melting point.

This compound is the primary source of magnesium and fluoride ions in many industrial and chemical processes. Magnesium fluoride is produced by the reaction between magnesium oxide and hydrogen fluoride.

MgO + 2HF → MgF2 + H2O

In the laboratory, magnesium fluoride is produced by dissolving magnesium hydroxide in hydrofluoric acid.

Mg(OH)2 + 2HF → MgF2 + 2H2O

Magnesium fluoride is used in the production of ceramics and glass as a flux and to increase the resistance of the glass to attack by acids. Magnesium fluoride is also used as an optical coating on lenses and other optical components as it has a low refractive index.

Magnesium fluoride is a white crystalline solid with a bitter taste that is insoluble in water. It is the primary source of magnesium and fluoride ions in many industrial and chemical processes. The formula of magnesium fluoride is MgF2. It is used in the production of ceramics and glass as a flux and to increase the resistance of the glass to attack by acids. Magnesium fluoride is also used as an optical coating on lenses and other optical components as it has a low refractive index.

To know more about magnesium fluoride visit:

brainly.com/question/14829849

#SPJ11

Answer: Measure the density

Explanation: pretty sure the density could identify if it is a mixture or a pure substance