a 02-series single-row angular contact ball bearing with a 65-mm bore is loaded with a 4.56kn axial load and a 7kn radial load. the outer ring rotates at 500 rpm. determine the equivalent radial load that will be experienced by this particular bearing

Answer: The failure of engineers working on the Mars Climate-Orbiter to coordinate measurement standards, resulting in a major public embarrassment for NASA, is an example of a communication issue known as cultural difference or cross-cultural communication. This refers to the difficulties that can arise when people from different cultures, with different languages, customs, and communication styles, work together on a project. In this case, the interaction between the British and U.S. teams working on the Mars Climate-Orbiter project is an example of cultural differences that led to communication issues and ultimately resulted in the failure of the project.

Specifically, the engineers from the US team used the imperial system of measurement, while the engineers from the UK team used the metric system, this led to a misinterpretation of the data, and the orbiter was lost due to a miscalculation in the trajectory.

Explanation:

The four red annunciators that trip the master warning light are typically:

1. Engine-related issues: This annunciator is triggered when there are problems with the engine, such as overheating or low oil pressure.

2. Electrical system failure: This annunciator indicates issues with the aircraft's electrical system, such as a generator failure or low battery voltage.

3. Hydraulic system failure: This annunciator is activated when there are problems with the hydraulic system, such as low pressure or fluid leakage.

4. Flight control system failure: This annunciator is tripped when there is a malfunction with the aircraft's flight control systems, like aileron, elevator, or rudder issues.

These 4 red annunciators help alert the pilot to potential problems with critical aircraft systems, and when they trip, the master warning light will illuminate to quickly draw attention to the issue.

to know more about  Electrical system:

https://brainly.com/question/30860562

#SPJ11

Answer:

I think its A

Explanation:

Answer:

The distributions of solid wastes produced daily at a commercial facility are normally distributed with a mean of 10 yd3 and a standard deviation of 7 yd3. If you were to make a container size recommendation for this facility, what size would you propose? What important tradeoffs should be considered when selecting the size of the container?

It's quite perplexing to determine the perfect size of container for a facility whose waste quantity varies and is subject to changes frequently. A certain degree of burstiness is present in the distribution of solid waste generated on a daily basis in a commercial facility. However, using the available mean and standard deviation values, we can infer that a container size of 24 yd3 should be sufficient to hold the daily waste generated, considering that it's two standard deviations above the mean.

When selecting a container size, various tradeoffs must be considered. A large container is more efficient, as it would not require to be emptied as frequently, but it might be expensive and may take up more space. A smaller container may be less expensive and take up less space, but it would need to be emptied more frequently, which can result in higher transportation costs and more time spent on waste management. It is therefore essential to strike a balance between the frequency of emptying and the container size to ensure that the waste is managed effectively and efficiently.

Answer:

engineers are people who fix or invent items that will support people’s lives. For fun, engineers may construct unique items that is hard to invent.

Explanation:

If you need more info, pls comment.

Answer:

An engineer uses science, technology and math to solve problems. It designes machinery, build skyscrapers and oversee public works.

In the enterprise sphere of influence, application software plays a vital role in supporting various business operations. Among the common functions that application software is used for are order processing, accounting, and inventory management.

These applications help businesses to efficiently track and manage their inventory, accounts payable and receivable, and orders, which leads to improved productivity and cost-effectiveness.

Another crucial use of application software in the enterprise is for creating, editing, and printing text documents and spreadsheets. These applications facilitate communication and collaboration among team members, allowing for the sharing of information and data analysis. Moreover, the software enables businesses to create professional-looking documents that meet the needs of their customers and stakeholders.

Application software can also aid with scheduling meetings and coordinating team members' efforts. With features like shared calendars, task lists, and to-do lists, teams can better manage their time and resources, ensuring that projects are completed on time and within budget. Furthermore, applications that support project management enable businesses to plan, monitor, and control project activities effectively.

Finally, application software can be used to develop graphs, illustrations, and educational presentations. These applications help businesses to visually represent data and information, making it easier for stakeholders to understand complex concepts. Additionally, educational presentations enable businesses to train their employees on new technologies and processes, thus improving their skills and competencies.

In summary, application software is an essential tool for businesses in the enterprise sphere of influence, enabling them to streamline operations, communicate and collaborate more effectively, and represent data and information visually.

Learn more about application software  here:-

https://brainly.com/question/4560046

#SPJ11

A system will never enter a deadlocked state if the system uses the detection and recovery technique. Thus the correct option is B.

A deadlock in desktop software happens when a procedure or task enters a waiting state as a result of another waiting process holding the requested system resource.

When a group of processes is in a wait state, a deadlock occurs because each process is awaiting a resource that is being held by another waiting process.

The wait-for graph must be maintained by the system in order to detect deadlocks, and the system periodically runs an operation that looks for cycles in the wait-for graph.

There is no method used by the OS to avoid or stop deadlocks. The OS checks the system on a regular basis for any deadlocks in an effort to break them. Therefore, option B is appropriate.

Learn more about the detection and recovery technique, here:

https://brainly.com/question/29107758

#SPJ5

Answer:

Yeah the metal part of the seat belt is a better thermal conductor than the plastic part of the seat belt.

Explanation:

Clay has low permeability high porosity. Option C is correct.

Permeability refers to the ability of a material to allow fluids to pass through it, while porosity refers to the amount of empty space, or voids, within a material.

Clay has low permeability and high porosity. This means that the pores within the clay are relatively large, allowing for water and other fluids to be absorbed easily, but the pathways for those fluids to flow through the clay are restricted. This is due to the fine-grained nature of clay particles, which pack closely together and create a relatively impermeable structure. The high porosity of clay, however, allows it to hold onto water and nutrients, making it a valuable soil component for plant growth.

In summary, clay's low permeability and high porosity are important factors to consider when assessing its suitability for different applications, such as soil engineering or pottery making.

Learn more about the Permeability: https://brainly.com/question/19627361

#SPJ11

Answer:

Water is pumped from a lake to a storage tank of 15 m above at a rate of 70 L/s while consuming 15.4 kW of electric power. Disregarding any frictional losses in the pipes and any changes in kinetic energy, determine (a) the overall efficiency of the pump-motor unit and (b) the pressure difference between the inlet and the exit of the pump.Explanation:

Answer:

C). America’s veterans defend our freedom, but they sacrifice their personal ambitions and their lives, and many of them suffer physically and mentally from their experiences.

Explanation:

A good thesis statement must provide the central idea or theme of the paper or the essay in a capsule form along with its theoretical base. The key characteristics of a thesis statement are its arguability, specificity, and intensity. As per these descriptions, the above statement correctly relates the main point('America's...freedom') very clearly and precisely. It also contains the arguability which can be supported through further evidences.

The statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

It should be noted that data simply means the facts or statistics that are put together to get more information about a particular issue.

It should be noted that a project simony refers to an individual or collaborative enterprise which is planned in order to achieve a particular aim. In this case, the land-development company launched an engineering project on land adjacent to a protected wetlands area.

It should be noted that the time frame that the data was collected matters a lot in order to get a valid conclusion.

In this case, the statement that summarizes the data is that the population data should be collected over a much lingers period of time in order to draw a valid conclusion.

Learn more about data on:

brainly.com/question/4219149

#SPJ1

The options to the question:

a. The data Gail to represent a broad diversity of species and so do not provide enough information to adequately draw a conclusion.

b. Population data were not sampled frequently enough to draw a valid conclusion.

c. The data show stable population trends in native species providing evidence that the engineering project has no negative impact on the ecosystem.

d. The population data should be collected over a much lingers period of time in order to draw a valid conclusion.

One piece of information you would not need for this evaluation is the instructor's personal life details.

In formative evaluation of instructor-led instruction, the goal is to gather data and insights that can help improve the teaching process and enhance learning outcomes for students. When considering the information needed for this evaluation, you would focus on elements such as teaching methods, instructor's clarity, and student engagement.

However, one piece of information you would not need for this evaluation is the instructor's personal life details. These details, such as their hobbies or family background, do not have a direct impact on the quality of the instruction provided.  

Instead, the evaluation should center on factors that influence the effectiveness of the instruction, such as course content, lesson plans, classroom environment, and communication skills.

By excluding irrelevant information, you can ensure that the formative evaluation remains focused on essential aspects that contribute to the success of the instructor-led instruction. This approach will facilitate better understanding of the instructional process and allow for targeted improvements to enhance the learning experience for students.

Learn more about communication brainly.com/question/29811467

#SPJ11

Try reciting the names of the two classes together just to determine which is the base and what is the subclass.

The capacity of an entity to assume various forms is known as polymorphism. Polymorphism in Java refers to a class's capability to offer various versions of a method depending on the kind of object it receives as a parameter.

What are the different kinds of polymorphism?

Result for polymorphism inside an image

In C++, polymorphism refers to when that object or procedure behaves differently in various settings. Compile-time diversity and real time polymorphism are the two types .

To know more about polymorphism visit:

brainly.com/question/29887429

#SPJ4

Answer:

10.5

Explanation:

Measuring a Brake Drum, the Brake Micrometer is set to a Base Drum Diameter of 10 Inches plus four notches, and the dial reads 22.  Diameter of the drum is 10.5.

Any straight line segment that cuts through the center of a circle and has ends that are on the circle is considered a circle's diameter in geometry. It is also known as the circle's longest chord.

The diameter of a sphere can be defined using either of the two methods. In more recent usage, the diameter can also refer to a diameter's length, or displaystyle d.

As opposed to a diameter, which refers to the line segment itself, one uses the term "diameter" in this context since all diameters of a circle or sphere have the same length, which is equal to twice the radius "displaystyle r.

Therefore, Measuring a Brake Drum, the Brake Micrometer is set to a Base Drum Diameter of 10 Inches plus four notches, and the dial reads 22.  Diameter of the drum is 10.5.

To learn more about diameter, refer to the link:

https://brainly.com/question/5501950

#SPJ5

Answer:

If Reynolds number increases the extent of the region around the object that is affected by viscosity decreases.

Explanation:

Reynolds number is an important dimensionless parameter in fluid mechanics.

It is calculated as;

\(R_e__N} = \frac{\rho vd}{\mu}\)

where;

ρ is density

v is velocity

d is diameter

μ is viscosity

All these parameters are important in calculating Reynolds number and understanding of fluid flow over an object.

In aerodynamics, the higher the Reynolds number, the lesser the viscosity plays a role in the flow around the airfoil. As Reynolds number increases, the boundary layer gets thinner, which results in a lower drag. Or simply put, if Reynolds number increases the extent of the region around the object that is affected by viscosity decreases.

Answer:

what's the question?...........

Answer:

speed, force

Explanation:

A mechanism is a device that transmits movements so that the output movement is different than the input movement. It can be used to change the direction, speed, force, or type of movement.

In engineering, mechanisms transmit motion along with force. Components that can make up a mechanism can include, but is not limited to gears, chain and sprockets, cams and their followers etc.

Causal link is very important to know the correlation between a cause and an outcome of a workplace accident which is useful for social insurance cover.

In work accidents, there is the need for evaluation criteria and injury determination. Now, this is where causal link comes in because we'll need to know whether the damage is a permanent disability or not.

Now, causal link is important because it helps us to know the correlation between a cause and an outcome of a workplace accident and whether it was intentional or caused by other factors. This is very important because of social insurance cover.

Read more about Work Accidents at; https://brainly.com/question/17583177

Answer:

good shoes

Explanation:

yes

The software industry is evolving, and software certification is crucial. ​Software certification is a digitally signed certificate that verifies the identification of an individual or company. ​

A certificate, sometimes known as a digital certificate, is a special document that has been digitally signed and authenticates the identity of a person or business.

Its validity may be checked using public-key cryptography to make sure that the program or website you are accessing is reliable.

Software developers must demonstrate that their program executes the XBRL conformance suites successfully in order to be certified.

They must also supply extra test cases so that XBRL employees can test the program further. The validity of certification is one year, renewable yearly.

Hence the software industry is evolving, and software certification is crucial. ​

To learn more about the software certification refer;

https://brainly.com/question/11299456

#SPJ1

Answer:

0.14% probability of observing more than 4 errors in the carpet

Explanation:

When we only have the mean, we use the Poisson distribution.

In a Poisson distribution, the probability that X represents the number of successes of a random variable is given by the following formula:

\(P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}\)

In which

x is the number of sucesses

e = 2.71828 is the Euler number

\(\mu\) is the mean in the given interval.

The number of weaving errors in a twenty-foot by ten-foot roll of carpet has a mean of 0.8.

This means that \(\mu = 0.8\)

What is the probability of observing more than 4 errors in the carpet

Either we observe 4 or less errors, or we observe more than 4. The sum of the probabilities of these outcomes is 1. So

\(P(X \leq 4) + P(X > 4) = 1\)

We want P(X > 4). Then

\(P(X > 4) = 1 - P(X \leq 4)\)

In which

\(P(X \leq 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)\)

\(P(X = x) = \frac{e^{-\mu}*\mu^{x}}{(x)!}\)

\(P(X = 0) = \frac{e^{-0.8}*(0.8)^{0}}{(0)!} = 0.4493\)

\(P(X = 1) = \frac{e^{-0.8}*(0.8)^{1}}{(1)!} = 0.3595\)

\(P(X = 2) = \frac{e^{-0.8}*(0.8)^{2}}{(2)!} = 0.1438\)

\(P(X = 3) = \frac{e^{-0.8}*(0.8)^{3}}{(3)!} = 0.0383\)

\(P(X = 4) = \frac{e^{-0.8}*(0.8)^{4}}{(4)!} = 0.0077\)

\(P(X \leq 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4) = 0.4493 + 0.3595 + 0.1438 + 0.0383 + 0.0077 = 0.9986\)

\(P(X > 4) = 1 - P(X \leq 4) = 1 - 0.9986 = 0.0014\)

0.14% probability of observing more than 4 errors in the carpet

Answer:

0.14% probability of observing more than 4 errors in the carpet

Explanation:

Answer: The velocity of a motor cyclist who travelled a distance of 200 m in 10 seconds is 20 m/sec.

Explanation:

Given: Distance = 200 m

Time = 10 seconds

Formula used to calculate velocity is as follows.

\(Velocity = \frac{Distance}{Time}\)

Substitute the value into above formula as follows.

\(Velocity = \frac{Distance}{Time}\\= \frac{200 m}{10 sec}\\= 20 m/sec\)

Thus, we can conclude that the velocity of a motor cyclist who travelled a distance of 200 m in 10 seconds is 20 m/sec.

Technician A is correct. Technician B is also correct that a Digital Multimeter (DMM) can be used, as it measures various electrical values like voltage, current, and resistance.

Both technicians are partially correct.
A logic probe can be used to test the primary circuit as it can detect and indicate the presence of logic signals, such as pulses or high/low voltages.
A DMM (digital multimeter) can also be used to test the primary circuit as it can measure voltage, current, and resistance. However, it may not be able to detect the presence of logic signals.
Therefore, it depends on the specific needs and requirements of the testing situation. If logic signals need to be detected, a logic probe would be more appropriate. If voltage, current, and resistance measurements are needed, a DMM would be more appropriate.

To learn more about Digital Multimeter, click here:

brainly.com/question/5135212

#SPJ11

At 1.2mpa pressure and 50c

What is pressure?
By pressing a knife against some fruit, one can see a straightforward illustration of pressure. The surface won't be cut if you press the flat part of the knife against the fruit. The force is dispersed over a wide area (low pressure).

a)Mass flow rate of the refrigerant
Therefore h1= condenser inlet enthalpy =278.28KJ/Kg
saturation temperature at 1.2mpa is 46.29C
Therefore the temperature of the condenser

T2 = 46.29C - 5
T2 = 41.29C

Now,
d)power consumed by compressor W = 3.3KW
Q4 = QL + w = Q4
QL = mR(h1-h2)-W
= 0.0498 x (278.26 - 110.19)-3.3
=5.074KW
Hence refrigerator load is 5.74Kg

(COP)r = 238/53
(Cop) = 4.490

Therefore the above values are the (a) mass flow rate of the refrigerant, b) the refrigerant load, c) the cop, and d) the minimum power input to the compressor for the same refrigeration load.

To learn more about pressure
https://brainly.com/question/13717268
#SPJ4

Answer:

Deactivated Anti-Lock Braking System

Explanation:

Well this actually depends on the vehicles braking function

I'd say in this case not sure if ABS coz it prevents the vehicle from slipping while braking...

On the otherside ESP is inportant for it stability

Misaligned goals, incentives, and expectations as well as disparities in negotiating power and information asymmetry can all lead to channel conflict between manufacturers and dealers in the automotive industry.

A number of misalignments in the automotive industry can lead to channel conflict between manufacturers and dealers. A discrepancy in aims and objectives is one of the main causes. Although dealers strive for profitability and customer pleasure, manufacturers frequently place a higher priority on growing sales volume and market share. Conflicts over inventory, price, and promotions may result from this mismatch. The mismatch of power and control is another example. Manufacturers could try to exercise more influence over dealer operations, which might result in disagreements over decision-making and autonomy. Lastly, conflicts over price, incentives, and performance expectations might arise as a result of knowledge asymmetry between manufacturers and dealers.

learn more about automotive industry here:

https://brainly.com/question/30185902

#SPJ4

Answer:

Zero

Explanation:

For this, it is necessary to use the  the Hagen-Poiseuille equation, which is a law of physics that describes an incompressible fluid of low viscosity through a tube of constant circular cross-section.

By derivating the Pressure over x it becomes zero

\(\frac{dP}{dx} = 0\)

Learned helplessness is the idea that we have no influence over how something will turn out, whether it is true or not.

Because some food ingredients, such as oxalic acid and phytic acid, which naturally present in some plants, can bind with calcium and impede its absorption in the body, the body's capacity to absorb calcium will diminish if we consume a diet high in calcium. Spinach, collard greens, beans, and sweet potatoes all have significant oxalic acid content. Whole grain products that contain fibre, seeds, and soy isolates are examples of foods that contain phytic acid. Just 30% of the calcium in food is absorbed by humans, and this varies depending on the sort of food we are eating. Individuals who behave in this way typically have gone through a number of adverse circumstances that were beyond of their control. They most likely won't make an effort to avoid unpleasant stimuli in the future because of this.  

Learn more about Calcium here:

https://brainly.com/question/15244115

#SPJ4

Using the knowledge of computational language in C++ it is possible to write a code that user-input value is the number of nodes in the linked list

#include "MileageTrackerNode.h"

#include <string>

#include <iostream>

using namespace std;

int main(int argc, char *argv[]) {

   // References for MileageTrackerNode objects

   MileageTrackerNode *headNode;

   MileageTrackerNode *currNode;

   MileageTrackerNode *lastNode;

   double miles;

   string date;

   // Front of nodes list

   headNode = new MileageTrackerNode();

   lastNode = headNode;

   // Read in the number of nodes

   int no_nodes;

   cin >> no_nodes;

   // For the read in number of nodes, read in data and insert into the linked list

   MileageTrackerNode *tail = headNode;

   for (int i = 0; i < no_nodes; ++i) {

       double milesInit;

       cin >> milesInit;

       cin >> date;

       MileageTrackerNode *newNode = new MileageTrackerNode(milesInit, date, nullptr);

       tail->InsertAfter(newNode);

       tail = newNode;

   }

   // Call the PrintNodeData() method to print the entire linked list

   MileageTrackerNode *cur = headNode->GetNext();

   while (cur != nullptr) {

       cur->PrintNodeData();

       cur = cur->GetNext();

   }

   // MileageTrackerNode Destructor deletes all following nodes

   delete headNode;

}

See more about C++ at brainly.com/question/12975450

#SPJ1